OMNITRON-MIB
309 objects
Omnitron MIB for use with v5.2 iConverter Management Modules and NetOutlook Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved
Imported Objects
| OMNITRON-TC-MIB | -- RFC-2580 omnitron icAgent OstModeType OstPortList OstPortNumber OstVlanId |
| SNMPv2-CONF | -- RFC-2579 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC-2578 DisplayString TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7342.1.1 | TablechassisTable | not-accessible | current | This a table of chassis and their modules. |
| 1.3.6.1.4.1.7342.1.1.1 | RowchassisEntry | not-accessible | current | Chassis modules. |
| 1.3.6.1.4.1.7342.1.1.1.1 | Columnchassisnum | read-only | current | The chassis where the module resides. Ranges in value from 1 - 19. |
| 1.3.6.1.4.1.7342.1.1.1.2 | Columnslotnum | read-only | current | The slot number of the module. For the 19 slot chassis it ranges in value from 1-22. For the 2 slot chassis it ranges in value from 1-2. |
| 1.3.6.1.4.1.7342.1.1.1.3 | Columnchassistype | read-only | current | Type of chassis: 1 = 19 module chassis 2 = 2 module chassis 3 = 5 module chassis 4 = 1 module chassis 5 = stand alone chassis 6 = 1-module redundant power chas… |
| 1.3.6.1.4.1.7342.1.1.1.4 | Columnprodtype | read-only | current | The product type of the module: 61 = iConverter NMM 64 = iConverter Power Supply (19 Module) 65 = iConverter 10FL/T Ethernet 66 = iConverter 100 Fx/Tx Ethernet… |
| 1.3.6.1.4.1.7342.1.1.1.5 | Columnchassisname | read-write | current | The name of the chassis. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly throu… |
| 1.3.6.1.4.1.7342.1.1.1.6 | Columnpartnum | read-only | current | The part number of the module. |
| 1.3.6.1.4.1.7342.1.1.1.7 | Columnserialnum | read-only | current | The serial number of the module. |
| 1.3.6.1.4.1.7342.1.1.1.8 | Columnmanufdate | read-only | current | The date the module was manufactured in form YYYYMMDD. |
| 1.3.6.1.4.1.7342.1.1.1.9 | Columnsoftrev | read-only | current | The software revision of the module software. |
| 1.3.6.1.4.1.7342.1.1.1.10 | Columnprodrev | read-only | current | The product revision of the module. |
| 1.3.6.1.4.1.7342.1.1.1.11 | Columnledstat | read-only | current | The status of any first 32 LEDs on the module, excluding the power LED. If an LED is missing its number is skipped. For an eight LED position device the follow… |
| 1.3.6.1.4.1.7342.1.1.1.12 | Columnswitchstat | read-only | current | The status of any DIP switches on the module. DIP switch 1 is switchstat.0, DIP switch 2 is switchstat.1, DIP switch 3 is switchstat.2, etc. DIP switch bank 1 … |
| 1.3.6.1.4.1.7342.1.1.1.13 | Columnextended1 | read-write | current | General extended status for the module. Normally this is the actual setting of the DIP switch selection. |
| 1.3.6.1.4.1.7342.1.1.1.14 | Columnextended2 | read-write | current | General extended status for the module |
| 1.3.6.1.4.1.7342.1.1.1.15 | Columnextended3 | read-write | current | General extended status for the module |
| 1.3.6.1.4.1.7342.1.1.1.16 | Columnextended4 | read-write | current | General extended status for the module |
| 1.3.6.1.4.1.7342.1.1.1.17 | Columnextended5 | read-write | current | General extended status for the module |
| 1.3.6.1.4.1.7342.1.1.1.18 | Columnextended6 | read-write | current | General extended status for the module |
| 1.3.6.1.4.1.7342.1.1.1.19 | Columnresetmod | read-write | current | Writing to this variable resets the module. This variable is a write only. Writing a zero (0) will reboot to the current working application image Writing a on… |
| 1.3.6.1.4.1.7342.1.1.1.20 | Columnwrswitch | read-write | current | Writing to this variable updates the module switch settings. See switchstat above for the explanation. |
| 1.3.6.1.4.1.7342.1.1.1.21 | Columnmodulename | read-write | current | The name of the module |
| 1.3.6.1.4.1.7342.1.6 | Scalarchassis | read-only | current | Holds the chassis number of the selected IP |
| 1.3.6.1.4.1.7342.1.8 | ScalarselfSlot | read-only | current | Holds the slot number of the selected IP |
| 1.3.6.1.4.1.7342.2 | NodeprodAgent | |||
| 1.3.6.1.4.1.7342.2.1 | NodeenhancedchassisTable | |||
| 1.3.6.1.4.1.7342.2.1.1 | ScalarmoduleCount | read-only | current | The number of modules in the chassis table |
| 1.3.6.1.4.1.7342.2.1.2 | TablemoduleTable | not-accessible | current | This a table of modules in the enhances chassis table. It contains as many entries as specified by moduleCount |
| 1.3.6.1.4.1.7342.2.1.2.1 | RowmoduleEntry | not-accessible | current | Chassis modules. |
| 1.3.6.1.4.1.7342.2.1.2.1.1 | Columnmodchassnum | read-only | current | The chassis where the module resides. |
| 1.3.6.1.4.1.7342.2.1.2.1.2 | Columnmodslotnum | read-only | current | The slot number within a chassis. |
| 1.3.6.1.4.1.7342.2.1.2.1.3 | Columnmodchasstype | read-only | current | The type of chassis in which the module resides. |
| 1.3.6.1.4.1.7342.2.1.2.1.4 | Columnmodprodtype | read-only | current | The chassis where the module resides. |
| 1.3.6.1.4.1.7342.2.1.2.1.5 | Columnmodsoftrev | read-only | current | The modules software revision. |
| 1.3.6.1.4.1.7342.2.1.2.1.6 | Columnmodprodrev | read-only | current | The modules product revision. |
| 1.3.6.1.4.1.7342.2.1.2.1.7 | Columnmodreset | read-write | current | Writing to this variable resets the module. This variable is a write only. Writing a zero (0) will reboot to the current working application image Writing a on… |
| 1.3.6.1.4.1.7342.2.1.2.1.8 | Columnmodnumports | read-only | current | The number of ports in this module. |
| 1.3.6.1.4.1.7342.2.1.2.1.9 | Columnmodchassname | read-only | current | The name of the chassis in which the individual module resides in. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octet… |
| 1.3.6.1.4.1.7342.2.1.2.1.10 | Columnmodpartnum | read-only | current | The model of the individual module. |
| 1.3.6.1.4.1.7342.2.1.2.1.11 | Columnmodserialnum | read-only | current | The serial number of the individual module. |
| 1.3.6.1.4.1.7342.2.1.2.1.12 | Columnmodmanufdate | read-only | current | The manufacturing date of the individual module. |
| 1.3.6.1.4.1.7342.2.1.2.1.13 | Columnmodname | read-only | current | The name of the individual module. |
| 1.3.6.1.4.1.7342.2.1.2.1.14 | Columnmodportvlan | read-write | current | The portvlan map of an individual module. The low order bits encode the possible values. The following are the connection paths that exists between the ports o… |
| 1.3.6.1.4.1.7342.2.1.2.1.15 | Columnmodextfeaturebits | read-only | current | The module's extended features bits. The bit definitions are: bit0 - module is capable of being field upgradeable bit1 - module supports MIB Statistics bit2 - … |
| 1.3.6.1.4.1.7342.2.1.2.1.16 | Columnmodswbuildnum | read-only | current | The module's software build number. |
| 1.3.6.1.4.1.7342.2.1.2.1.17 | Columnmodenable802dot1qProcessing | read-write | current | Enables or disables 802_1q processing. 0 = disable 1 = enable |
| 1.3.6.1.4.1.7342.2.1.2.1.18 | Columnmodtagsubstitution | read-write | current | Enables or disables substitution of 802_1q tags. Currently not implemented by any supported module |
| 1.3.6.1.4.1.7342.2.1.2.1.19 | ColumnmodcommitVLANchanges | read-write | current | VLAN information is applied to the module and data saved to persistent storage. This variable is a write only. |
| 1.3.6.1.4.1.7342.2.1.2.1.20 | ColumnmodvlanTableClear | read-write | current | VLAN table for the module Vlan table to be cleared. This variable is a write only. |
| 1.3.6.1.4.1.7342.2.1.2.1.21 | ColumnmodcommitNMMCfgChanges | read-write | current | Management module configuration information is applied to the module and data saved to persistent storage. This variable is a write only. |
| 1.3.6.1.4.1.7342.2.1.2.1.22 | ColumnmodLM80volts | read-only | current | 8 bits each of PS1 Voltage(msB), PS2 Voltage, Total Voltage and an unused byte(lsB). 1-module redundant power chassis. |
| 1.3.6.1.4.1.7342.2.1.2.1.23 | ColumnmodLM80currents | read-only | current | 8 bits each of PS1 Current(msB) (mA/10), PS2 Current, Total Current and an unused byte(lsB). 1-module redundant power chassis. |
| 1.3.6.1.4.1.7342.2.1.2.1.24 | ColumnmodLM80misc | read-only | current | 8 bits each of Temperature(msB) .5C/bit and 2 unused byte(lsB). 1-module redundant power chassis. |
| 1.3.6.1.4.1.7342.2.1.2.1.25 | ColumnmodRestoreFactoryDefaults | read-write | current | Management module configuration information is restored to factory defaults. This variable is a write only. Different types of restore defaults are supported: … |
| 1.3.6.1.4.1.7342.2.1.2.1.26 | ColumncoreStatusOnly | read-write | current | Enable(1) or disable(0) Core Status Only. |
| 1.3.6.1.4.1.7342.2.1.2.1.27 | ColumningressPolicingType | read-write | current | Sets the module global policy used to count bytes for bandwidth calculation purposes. This is available on the GM3 & GM4. This is not available on the XM5. 1 =… |
| 1.3.6.1.4.1.7342.2.1.2.1.28 | Columnvlanservicetag | read-write | current | Value for service tag. |
| 1.3.6.1.4.1.7342.2.1.2.1.29 | ColumndefaultForwardingMap | read-write | current | Bit vector for default forwarding map where: bit0 - Port 1 bit1 - Port 2 bit2 - Port 3 bit3 - Port 4 bit4 - Port BPA bit5 - Port BPB |
| 1.3.6.1.4.1.7342.2.1.2.1.30 | ColumnmodFpgaRev | read-only | current | The current revision of the FPGA. |
| 1.3.6.1.4.1.7342.2.1.2.1.31 | ColumnmodExpPartNumber | read-only | current | The expanded part number of the individual module. The modpartnum object indicates the compressed version of the part number name. If this field is not support… |
| 1.3.6.1.4.1.7342.2.1.2.1.32 | ColumnmodExpSoftwareRev | read-only | current | The expanded software revision of the individual module. This object allows for an enhanced version of the software revision that include a major and minor com… |
| 1.3.6.1.4.1.7342.2.1.2.1.33 | ColumnmodExpLedStatus | read-only | current | This object is the expanded LED status of the individual module. This object reflects the state, color, and blinking rate of each individual LED. Each LED is r… |
| 1.3.6.1.4.1.7342.2.1.2.1.34 | ColumnmodHwRev | read-only | current | The current hardware revision of the module. |
| 1.3.6.1.4.1.7342.2.1.2.1.35 | ColumnmodPcbRev | read-only | current | The current PCB revision of the module. |
| 1.3.6.1.4.1.7342.2.1.3 | TablemoduleMgtCfgTable | not-accessible | current | This is a table of the management module configuration variables. |
| 1.3.6.1.4.1.7342.2.1.3.1 | RowmoduleMgtCfgEntry | not-accessible | current | Chassis modules. |
| 1.3.6.1.4.1.7342.2.1.3.1.1 | ColumnsysAdminStatus | read-only | current | This variable provides the status for a management module's ability to make changes to the system. In backplane slave, a management module cannot make system m… |
| 1.3.6.1.4.1.7342.2.1.3.1.2 | ColumnsysDateTime | read-write | current | This variable provides the date and time in display format: nn/dd/yyyy hh:mm:ss where nn = 2 digit month, dd = 2 digit day, yyyy = 4 digit year hh - 2 digit ho… |
| 1.3.6.1.4.1.7342.2.1.3.1.3 | ColumnmacAddr | read-only | current | MAC address of the management module |
| 1.3.6.1.4.1.7342.2.1.3.1.4 | ColumnipAddr | read-write | current | IP of the management module |
| 1.3.6.1.4.1.7342.2.1.3.1.5 | Columnsubnetmask | read-write | current | subnetmask for the management module |
| 1.3.6.1.4.1.7342.2.1.3.1.6 | Columngateway | read-write | current | IP address for the gateway the management module will use. |
| 1.3.6.1.4.1.7342.2.1.3.1.7 | ColumnreadCommunity | read-write | current | SNMP read community name. |
| 1.3.6.1.4.1.7342.2.1.3.1.8 | ColumnwriteCommunity | read-write | current | SNMP set community name. |
| 1.3.6.1.4.1.7342.2.1.3.1.9 | Columnmychassnum | read-write | current | NMMs chassis number. |
| 1.3.6.1.4.1.7342.2.1.3.1.10 | Columnmmname | read-write | current | Management Modules chassis name. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed direct… |
| 1.3.6.1.4.1.7342.2.1.3.1.11 | Columntraphost1 | read-write | current | NMMs traphost1 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.12 | Columntraphost2 | read-write | current | NMMs traphost2 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.13 | Columntraphost3 | read-write | current | NMMs traphost3 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.14 | Columntraphost4 | read-write | current | NMMs traphost4 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.15 | Columntraphost5 | read-write | current | NMMs traphost5 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.16 | Columntraphost6 | read-write | current | NMMs traphost6 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.17 | Columntraphost7 | read-write | current | NMMs traphost7 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.18 | Columntraphost8 | read-write | current | NMMs traphost8 IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.19 | Columnsysloc | read-write | current | Management Modules system location. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed dir… |
| 1.3.6.1.4.1.7342.2.1.3.1.20 | Columnsyscon | read-write | current | Management Modules system Contact information. For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is a… |
| 1.3.6.1.4.1.7342.2.1.3.1.21 | Columnserialpass | read-write | current | NMMs serial interface password. |
| 1.3.6.1.4.1.7342.2.1.3.1.22 | Columntelnetpass | read-write | current | NMMs telnet interface password. |
| 1.3.6.1.4.1.7342.2.1.3.1.23 | Columnftppasswrd | read-write | current | NMMs ftp password. |
| 1.3.6.1.4.1.7342.2.1.3.1.24 | ColumnkeepAliveInterval | read-write | current | This the interval used by the NMM to send out keep alive traps. |
| 1.3.6.1.4.1.7342.2.1.3.1.25 | ColumnvlanIdOst | read-write | current | Management module VLAN tagged packet ID. |
| 1.3.6.1.4.1.7342.2.1.3.1.26 | ColumnnmmCfgSerialBaudrate | read-write | current | This variable defines the baud rate for the serial interface to the NMM. Where: 1 = 300 bps 2 = 1200 bps 3 = 2400 bps 4 = 4800 bps 5 = 9600 bps 6 = 19200 bps 7… |
| 1.3.6.1.4.1.7342.2.1.3.1.27 | ColumnenabledFunctions | read-write | current | This variable defines which special functions are enabled at the NMM. Where: 0x01 = Keep Alive trap enabled 0x02 = Telnet enabled 0x04 = FTP enabled 0x08 = swi… |
| 1.3.6.1.4.1.7342.2.1.3.1.28 | ColumnenableSNMPFunction | read-write | current | This variable defines whether the SNMP Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled |
| 1.3.6.1.4.1.7342.2.1.3.1.29 | ColumnnmmCfgState | read-only | current | This variable defines the state of the configuration changes made to the NMM. Where: 0x00 = No changes 0x02 = Changes Pending (not saved in Flash) 0x04 = Saved… |
| 1.3.6.1.4.1.7342.2.1.3.1.30 | ColumnnmmSecureMode | read-write | current | This variable defines the mode the Management module will operate in when configured for SECURE COMMUNICATIONS. Where: 0x00 = No Secure Communications 0x01 = S… |
| 1.3.6.1.4.1.7342.2.1.3.1.31 | ColumnnmmSecureConnState | read-only | current | This variable returns the secure connection state between the proxy and secure slave. Where: 0x00 = Not connected 0x01 = Connection Pending 0x02 = Connection e… |
| 1.3.6.1.4.1.7342.2.1.3.1.32 | ColumnnmmIpProtocolState | read-only | current | This variable defines whether the IP protocol is active or disabled. 0 = Active 1 = Disabled |
| 1.3.6.1.4.1.7342.2.1.3.1.33 | ColumnnmmIpDisabled | read-write | current | This variable defines the configuration value for IP protocol's desired state. 0 = ipActive 1 = ipDisabled |
| 1.3.6.1.4.1.7342.2.1.3.1.34 | ColumnvlanPri | read-write | current | Management module VLAN tagged packet priority. |
| 1.3.6.1.4.1.7342.2.1.3.1.35 | ColumnenableSNMPWrites | read-write | current | Permit SNMP SET operations. |
| 1.3.6.1.4.1.7342.2.1.3.1.36 | ColumncpuVoltageIn | read-only | current | voltage input to cpu. |
| 1.3.6.1.4.1.7342.2.1.3.1.37 | ColumncpuVoltageOut | read-only | current | Voltage out from the cpu. |
| 1.3.6.1.4.1.7342.2.1.3.1.38 | ColumncpuTemperature | read-only | current | The ambient temperature of the CPU. |
| 1.3.6.1.4.1.7342.2.1.3.1.39 | ColumnnmmSecureSlaveSlot | read-only | current | The slot number of the secure slave in the remote chassis when configured for SECURE COMMUNICATIONS. |
| 1.3.6.1.4.1.7342.2.1.3.1.40 | ColumndhcpIpAddr | read-only | current | IP of the management module as assigned by a DHCP server |
| 1.3.6.1.4.1.7342.2.1.3.1.41 | ColumndhcpSubnetmask | read-only | current | subnetmask of the management module as assigned by a DHCP server |
| 1.3.6.1.4.1.7342.2.1.3.1.42 | ColumndhcpGateway | read-only | current | Gateway IP address of the management module as assigned by a DHCP Server |
| 1.3.6.1.4.1.7342.2.1.3.1.43 | ColumnnmmOAMmgmtMode | read-write | current | This variable configures the protocol the Management module will use to communicate with remote chassis when operating in secure mode. Where: 0x01 = (OAM_OFF) … |
| 1.3.6.1.4.1.7342.2.1.3.1.44 | Columncustomertag | read-write | current | Value for customer tag. |
| 1.3.6.1.4.1.7342.2.1.3.1.45 | Columnservicetag | read-write | current | Value for service tag. |
| 1.3.6.1.4.1.7342.2.1.3.1.46 | ColumncnodeControl | read-write | current | Controls whether the module is operating as a Cnode. |
| 1.3.6.1.4.1.7342.2.1.3.1.47 | ColumncnodeCIR | read-write | current | Cnode CIR Where: 1 = 64 Kbps 2 = 128 Kbps 3 = 192 Kbps |
| 1.3.6.1.4.1.7342.2.1.3.1.48 | ColumnenableSNMPv3Function | read-write | current | This variable defines whether the SNMPv3 Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled |
| 1.3.6.1.4.1.7342.2.1.3.1.49 | ColumnslaveWrite | read-write | current | This variable defines whether the module should be allowed to make configurations to itself when in the chassis slave mode. Where: 00 = slaveWrite disabled 01 … |
| 1.3.6.1.4.1.7342.2.1.3.1.50 | ColumnsnmpTrapType | read-write | current | This variable defines which version of SNMP traps are supported, where: 1 = SNMPv1 traps 2 = SNMPv2c traps 3 = SNMPv3 traps |
| 1.3.6.1.4.1.7342.2.1.3.1.51 | ColumncapsMask | read-only | current | Capablility bits for this management module. |
| 1.3.6.1.4.1.7342.2.1.3.1.52 | ColumnslaveTraps | read-write | current | This variable defines whether the module should be allowed to transmit traps out ethernet ports eventhough it is not a chassis master. Where: 00 = slaveTraps d… |
| 1.3.6.1.4.1.7342.2.1.3.1.53 | ColumnslaveTrapsForward | read-write | current | This variable defines whether the module should be allowed to forward traps to the chassis master when module is a chassis slave. Default is forward. Where: 00… |
| 1.3.6.1.4.1.7342.2.1.3.1.54 | ColumnipAddr2 | read-write | current | IP 2 of the management module |
| 1.3.6.1.4.1.7342.2.1.3.1.55 | Columnsubnetmask2 | read-write | current | subnetmask 2 for the management module |
| 1.3.6.1.4.1.7342.2.1.3.1.56 | Columngateway2 | read-write | current | IP address for the gateway 2 the management module will use. |
| 1.3.6.1.4.1.7342.2.1.3.1.57 | ColumnipaddrEVCassociation | read-write | current | *** This object is deprecated *** EVC associated with ipaddr 1. |
| 1.3.6.1.4.1.7342.2.1.3.1.58 | Columnipaddr2EVCassociation | read-write | current | *** This object is deprecated *** EVC associated with ipaddr 2. |
| 1.3.6.1.4.1.7342.2.1.3.1.59 | ColumnbootpEnable | read-write | current | Enable or disable BOOTP. |
| 1.3.6.1.4.1.7342.2.1.3.1.60 | ColumntftpEnable | read-write | current | Enable or disable TFTP. |
| 1.3.6.1.4.1.7342.2.1.3.1.61 | ColumntftpServerIpAddress | read-write | current | TFTP server IP address. |
| 1.3.6.1.4.1.7342.2.1.3.1.62 | ColumndhcptftpServerIpAddress | read-only | current | TFTP Server IP address as assigned by a DHCP Server |
| 1.3.6.1.4.1.7342.2.1.3.1.63 | ColumntftpFileName | read-write | current | Selects the TFTP file name. |
| 1.3.6.1.4.1.7342.2.1.3.1.64 | ColumnmodeType | read-write | current | Sets the module Mode Type to normal, AP, or SP. |
| 1.3.6.1.4.1.7342.2.1.3.1.65 | ColumndhcpPortNumber | read-write | current | Sets the DHCP port number. 2 port module: 1=None, 2=Port 1, 3=Port 2, 4=BP A, 5=BP B 3 port module: 1=None, 2=Port 1, 3=Port 2, 4=Port 3, 5=BP A, 6=BP B 5 port… |
| 1.3.6.1.4.1.7342.2.1.3.1.66 | ColumndhcpTagVid | read-write | current | Sets the DHCP Tag VLAN ID. |
| 1.3.6.1.4.1.7342.2.1.3.1.67 | ColumntrapSrcIpSelect | read-write | current | Selects the trap source address, IP1(1) or IP2(2). |
| 1.3.6.1.4.1.7342.2.1.3.1.68 | ColumnmuxGroupDefaults | read-write | current | This object when written sets the Mux Grouping defaults for a management module. When read the value always returns 'false'. Writing this sets the Mux Group EV… |
| 1.3.6.1.4.1.7342.2.1.3.1.69 | ColumnportFwdCpu | read-write | current | This object enables forwarding of managment traffic from the selected ports only for M2 modules only. Management traffic from ports not defined is dropped. all… |
| 1.3.6.1.4.1.7342.2.1.3.1.70 | ColumnportFwdCpuList | read-write | current | This object enables forwarding of managment traffic from the selected ports only for M3, M4, and M5 modules only. Management traffic from ports not defined is … |
| 1.3.6.1.4.1.7342.2.1.4 | TablemodulePortsTable | not-accessible | current | This a table of Ports per module. There are as many entries as specified by modnumports in the moduleEntry |
| 1.3.6.1.4.1.7342.2.1.4.1 | RowmodulePortsEntry | not-accessible | current | Ports per module table. |
| 1.3.6.1.4.1.7342.2.1.4.1.1 | Columnportnum | not-accessible | current | Used to get or set state of port. |
| 1.3.6.1.4.1.7342.2.1.4.1.2 | ColumnportState | read-write | current | Used to get or set state of port. |
| 1.3.6.1.4.1.7342.2.1.4.1.3 | ColumnportEgressRate | read-write | current | Used to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (low… |
| 1.3.6.1.4.1.7342.2.1.4.1.4 | Columnportpriority | read-write | current | Used to get or set port user-priority. |
| 1.3.6.1.4.1.7342.2.1.4.1.5 | ColumnportcanonicalformatIndicator | read-write | current | Used to get or set port cfi. Currently not used and defaulted to 0 |
| 1.3.6.1.4.1.7342.2.1.4.1.6 | Columnportvlanidentifier | read-write | current | Used to get or set port VID. |
| 1.3.6.1.4.1.7342.2.1.4.1.7 | Columnportmlistcriteria | read-write | current | Used to get or set port membership criteria. |
| 1.3.6.1.4.1.7342.2.1.4.1.8 | Columnportingresssecurity | read-write | current | Used to get or set port ingress security. |
| 1.3.6.1.4.1.7342.2.1.4.1.9 | Columnportegresspolicy | read-write | current | Used to get or set port egress policy. |
| 1.3.6.1.4.1.7342.2.1.4.1.10 | ColumnportIngressRate | read-write | current | Used to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (low… |
| 1.3.6.1.4.1.7342.2.1.4.1.11 | ColumnportSpeed | read-only | current | Used to get the port speed. 0 = undefined 1 = speed10Mbps 2 = speed100Mbps 3 = speed1Gbps 4 = speed10Gbps |
| 1.3.6.1.4.1.7342.2.1.4.1.12 | ColumnportUnidirectionalAhOamEnable | read-write | current | Used to get/set the unidirectional support. 0 = uniDisabled 1 = uniEnabled |
| 1.3.6.1.4.1.7342.2.1.4.1.13 | ColumnportIngressRateDropOrPause | read-write | current | Used to get/set behavior on overflow. 0 = undefined 1 = inDrop 2 = inPause |
| 1.3.6.1.4.1.7342.2.1.4.1.14 | ColumnportIngressRateCBS | read-write | current | Used to get or set the port throughput limit selection. |
| 1.3.6.1.4.1.7342.2.1.4.1.15 | ColumnportL2CPmgntProcessing | read-write | current | Used to get or set the port L2Cp processing method. 0 = undefined 1 = inDrop 2 = inForward 3 = inTunnel |
| 1.3.6.1.4.1.7342.2.1.4.1.16 | ColumnportEgressQosPolicy | read-write | current | Used to get or set the port egress QoS Policy. 0 = undefined 1 = fairWeight 2 = starving |
| 1.3.6.1.4.1.7342.2.1.4.1.17 | ColumnportAccessType | read-write | current | Used to get or set the port access type. 0 = undefined 1 = tunnel 2 = access 3 = trunk |
| 1.3.6.1.4.1.7342.2.1.4.1.18 | ColumnportStatsClear | read-write | current | Used to clear the statistics table for this port |
| 1.3.6.1.4.1.7342.2.1.4.1.19 | ColumnportLinkState | read-only | current | Reports the link state of the port. 0 = No link 1 = Linked |
| 1.3.6.1.4.1.7342.2.1.4.1.20 | ColumnportDuplex | read-only | current | The object indcates the linked port duplex mode. undefined(0) Port is not linked or state of duplex is unknown halfDuplex(1) Port is linked at half duplex full… |
| 1.3.6.1.4.1.7342.2.1.4.1.21 | ColumnportMacAddress | read-only | current | MAC address of the port. If a MAC address doesn't exist on a port the value returned is all zeros. |
| 1.3.6.1.4.1.7342.2.1.5 | TableportStatsTable | not-accessible | current | This a table of Statistics per port. |
| 1.3.6.1.4.1.7342.2.1.5.1 | RowportStatsEntry | not-accessible | current | extended module statitical information. |
| 1.3.6.1.4.1.7342.2.1.5.1.1 | ColumntxOctets | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.2 | ColumntxDropPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.3 | ColumntxBroadcastPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.4 | ColumntxMulticastPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.5 | ColumntxUnicastPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.6 | ColumntxGoodPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.7 | ColumntxErrorPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.8 | ColumntxPausePkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.9 | ColumntxCollisions | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.10 | ColumntxSingleCollision | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.11 | ColumntxMultipleCollision | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.12 | ColumntxDeferedTransmit | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.13 | ColumntxLateCollision | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.14 | ColumntxExcessiveCollision | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.15 | ColumntxDroppedEvents | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.16 | ColumnrxOctets | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.17 | ColumnrxDropPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.18 | ColumnrxBroadcastPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.19 | ColumnrxMulticastPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.20 | ColumnrxUnicastPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.21 | ColumnrxGoodPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.22 | ColumnrxTotalPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.23 | ColumnrxErrorPkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.24 | ColumnrxPausePkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.25 | ColumnrxUndersizePkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.26 | ColumnrxOversizePkts | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.27 | ColumnrxFragments | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.28 | ColumnrxJabbers | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.29 | ColumnrxAlignmentErrors | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.30 | ColumnrxFCSErrors | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.31 | ColumnrxSymbolErrors | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.32 | ColumnrxCRCAlignErrors | read-only | current | Statistics counter - Object name explains its usage. |
| 1.3.6.1.4.1.7342.2.1.5.1.33 | ColumnrxPackets64 | read-only | current | Statistics counter - packets of octet count in object name. |
| 1.3.6.1.4.1.7342.2.1.5.1.34 | ColumnrxPackets65to127 | read-only | current | Statistics counter - packets of octet count in object name. |
| 1.3.6.1.4.1.7342.2.1.5.1.35 | ColumnrxPackets128to255 | read-only | current | Statistics counter - packets of octet count in object name. |
| 1.3.6.1.4.1.7342.2.1.5.1.36 | ColumnrxPackets256to511 | read-only | current | Statistics counter - packets of octet count in object name. |
| 1.3.6.1.4.1.7342.2.1.5.1.37 | ColumnrxPackets512to1023 | read-only | current | Statistics counter - packets of octet count in object name. |
| 1.3.6.1.4.1.7342.2.1.5.1.38 | ColumnrxPackets1024to1518 | read-only | current | Statistics counter - packets of octet count in object name. |
| 1.3.6.1.4.1.7342.2.1.5.1.39 | ColumntxOctets64 | read-only | current | 64 bit octet transmission counter. |
| 1.3.6.1.4.1.7342.2.1.5.1.40 | ColumnrxOctets64 | read-only | current | 64 bit octet receive counter. |
| 1.3.6.1.4.1.7342.2.1.6 | TablemoduleVLANTable | not-accessible | current | This a table of VLAN entries per module. There is a maximum of 64 valid entries in the table |
| 1.3.6.1.4.1.7342.2.1.6.1 | RowmoduleVLANEntry | not-accessible | current | VLAN module table. |
| 1.3.6.1.4.1.7342.2.1.6.1.1 | Columnindex | not-accessible | current | Used to get or set elements in the vlan table entry. |
| 1.3.6.1.4.1.7342.2.1.6.1.2 | Columnvalidityflag | read-write | current | Used to set or delete a VLAN table entry. 0 = entry does not exists or is to be deleted, 1 = entry to be created or re-activated (in the case the entry was mod… |
| 1.3.6.1.4.1.7342.2.1.6.1.3 | Columnvlanidentifier | read-write | current | Used to set or get the vlan identifier. valid settable range is 0-4095 |
| 1.3.6.1.4.1.7342.2.1.6.1.4 | Columnport1Membership | read-write | current | Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership |
| 1.3.6.1.4.1.7342.2.1.6.1.5 | Columnport2Membership | read-write | current | Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership |
| 1.3.6.1.4.1.7342.2.1.6.1.6 | Columnport3Membership | read-write | current | Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership |
| 1.3.6.1.4.1.7342.2.1.6.1.7 | Columnport4Membership | read-write | current | Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership |
| 1.3.6.1.4.1.7342.2.1.6.1.8 | Columnport5Membership | read-write | current | Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership |
| 1.3.6.1.4.1.7342.2.1.6.1.9 | Columnport6Membership | read-write | current | Used to set or get the port's membership in the specified vlan. 0 = not a member 1 = include in membership |
| 1.3.6.1.4.1.7342.2.1.7 | TableportAHTable | not-accessible | current | This is a table of AH parameter entries per port. |
| 1.3.6.1.4.1.7342.2.1.7.1 | RowportAHEntry | not-accessible | current | AH port table. |
| 1.3.6.1.4.1.7342.2.1.7.1.1 | ColumnahEnabled | read-write | current | Used to get or set the state of the AH protocol over specified port. 0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is a… |
| 1.3.6.1.4.1.7342.2.1.7.1.2 | ColumnahLpbkMode | read-write | current | Used to get or set the state of the OAM remote loopback. 0 = off - remote loopback is not active 1 = on - remote loopback has been activated |
| 1.3.6.1.4.1.7342.2.1.7.1.3 | ColumnahLocalMode | read-write | current | Used to get or set the mode AH OAM Client. 0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initi… |
| 1.3.6.1.4.1.7342.2.1.7.1.4 | ColumnahRemoteMode | read-only | current | Used to get or set the mode AH OAM Client. 0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initi… |
| 1.3.6.1.4.1.7342.2.1.7.1.5 | ColumnahLocalMuxState | read-only | current | Used to get local multiplexer state. 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames |
| 1.3.6.1.4.1.7342.2.1.7.1.6 | ColumnahRemoteMuxState | read-only | current | Used to get remote multiplexer state. 0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client fram… |
| 1.3.6.1.4.1.7342.2.1.7.1.7 | ColumnahLocalParserState | read-only | current | Used to get local parser state. 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multi… |
| 1.3.6.1.4.1.7342.2.1.7.1.8 | ColumnahRemoteParserState | read-only | current | Used to get remote parser state. 0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Mult… |
| 1.3.6.1.4.1.7342.2.1.7.1.9 | ColumnahLocalSupportVar | read-only | current | Used to get local configured features supported in bit encoded value. where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = inter… |
| 1.3.6.1.4.1.7342.2.1.7.1.10 | ColumnahLocalLinkFlags | read-only | current | Used to get Link Event status in bit encoded value. where: bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stabl… |
| 1.3.6.1.4.1.7342.2.1.7.1.11 | ColumnahLocalLpbkTimeout | read-write | current | Used to get/set Remote Loopback timeout. Value is in seconds with range 0 - 300. |
| 1.3.6.1.4.1.7342.2.1.7.1.12 | ColumnahRemoteSupportVar | read-only | current | Used to get remote configured features supported in bit encoded value. where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = inte… |
| 1.3.6.1.4.1.7342.2.1.7.1.13 | ColumnahRemoteLinkFlags | read-only | current | Used to get Link Event status in bit encoded value. bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 … |
| 1.3.6.1.4.1.7342.2.1.7.1.14 | ColumnahRemoteLpbkTimeout | read-only | current | Used to get/set Remote Loopback timeout. Value is in seconds with range 0 - 300. |
| 1.3.6.1.4.1.7342.2.1.7.1.15 | ColumnahLocalOUI | read-only | current | Used to get the Organizational Unique ID of the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.16 | ColumnahRemoteOUI | read-only | current | Used to get the Organizational Unique ID of the remote port. |
| 1.3.6.1.4.1.7342.2.1.7.1.17 | ColumnahErroredSymbolPeriodWindow | read-write | current | Used to get or set errored symbol period window for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.18 | ColumnahErroredSymbolPeriodThreshold | read-write | current | Used to get or set errored symbol period threshold for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.19 | ColumnahErroredFrameWindow | read-write | current | Used to get or set the errored symbol window for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.20 | ColumnahErroredFrameThreshold | read-write | current | Used to get or set the errored symbol threshold for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.21 | ColumnahErroredFramePeriodWindow | read-write | current | Used to get or set the errored frame period window for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.22 | ColumnahErroredFramePeriodThreshold | read-write | current | Used to get or set the errored frame period threshold for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.23 | ColumnahErroredFrameSecondsWindow | read-write | current | Used to get or set the errored frame seconds window for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.24 | ColumnahErroredFrameSecondsThreshold | read-write | current | Used to get or set the errored frame seconds threshold for the local port. |
| 1.3.6.1.4.1.7342.2.1.7.1.25 | ColumnahRemoteLinkPort | read-only | current | Used to get the port number of the remote partner. Value is in the Range 1-5. A zero port number indicates no connection or not supported |
| 1.3.6.1.4.1.7342.2.1.7.1.26 | ColumnahSymbolErrorRunningTotal | read-only | current | This object indicates the 802.3ah Symbol Error Running Total value from the last OAM sublayer reset or clear operation. A value of zero indicates that no symbo… |
| 1.3.6.1.4.1.7342.2.1.7.1.27 | ColumnahSymbolErrorEventTotal | read-only | current | This object indicates the number of 802.3ah Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset or the counters have bee… |
| 1.3.6.1.4.1.7342.2.1.7.1.28 | ColumnahFrameErrorRunningTotal | read-only | current | This object indicates the sum of the 802.3ah errored frames that have been detected since the OAM sublayer was reset or clear operation. A value of zero indica… |
| 1.3.6.1.4.1.7342.2.1.7.1.29 | ColumnahFrameErrorEventTotal | read-only | current | This object indicates the number of 802.3ah Errored Frame Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleare… |
| 1.3.6.1.4.1.7342.2.1.7.1.30 | ColumnahFramePeriodRunningTotal | read-only | current | This object indicates the sum of 802.3ah the frame errors that have been detected that have been since the OAM sublayer was reset or clear operation. A value o… |
| 1.3.6.1.4.1.7342.2.1.7.1.31 | ColumnahFramePeriodEventTotal | read-only | current | This object indicates the number of 802.3ah Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset or the counters have been… |
| 1.3.6.1.4.1.7342.2.1.7.1.32 | ColumnahFrameSecondsSummaryRunningTotal | read-only | current | This object indicates the sum of the 802.3ah errored frame seconds that have been detected that have been since the OAM sublayer was reset or clear operation. … |
| 1.3.6.1.4.1.7342.2.1.7.1.33 | ColumnahFrameSecondsSummaryEventTotal | read-only | current | This object indicates the number of 802.3ah Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset or the counters … |
| 1.3.6.1.4.1.7342.2.1.7.1.34 | ColumnahClearStatistics | read-write | current | This object when written clears the 802.3ah statistic counters associated with a specific port. When read the value always returns 'false'. Writing this value … |
| 1.3.6.1.4.1.7342.2.1.7.1.35 | ColumnahTransmissionRate | read-write | current | This object sets maximum 802.3ah PDU transmission rate. The default value is 10 (10 frames per second) |
| 1.3.6.1.4.1.7342.2.1.7.1.36 | ColumnahCriticalEventMode | read-write | current | Used to get or set the state of the local critical event mode. 0 = local critical events not enabled 1 = local critical events are enabled |
| 1.3.6.1.4.1.7342.2.1.7.1.37 | ColumnahCriticalEventTrapList | read-write | current | Used to the SNMP traps which will cause the generation of a local critical event. It is a list of zero or more trap numbers separated by a comma or range, '..'… |
| 1.3.6.1.4.1.7342.2.1.8 | TableportSFPTable | not-accessible | current | This is a table of AH parameter entries per port. |
| 1.3.6.1.4.1.7342.2.1.8.1 | RowportSFPEntry | not-accessible | current | SFP port table. |
| 1.3.6.1.4.1.7342.2.1.8.1.1 | ColumnportSFPstatus | read-only | current | Used to get present or absence of SFP device. 0 = undefined 1 = notPresent 2 = present |
| 1.3.6.1.4.1.7342.2.1.8.1.2 | ColumnportSFPpageA0 | read-only | current | Used to get SFP device EEPROM address A0 |
| 1.3.6.1.4.1.7342.2.1.8.1.3 | ColumnportSFPpageA2 | read-only | current | Used to get SFP device EEPROM address A2 |
| 1.3.6.1.4.1.7342.2.1.8.1.4 | ColumnportSfpBitRate | read-only | current | SFP Bitrate in Mbps |
| 1.3.6.1.4.1.7342.2.1.8.1.5 | ColumnportSfpVendorName | read-only | current | SFP Vendor Name |
| 1.3.6.1.4.1.7342.2.1.8.1.6 | ColumnportSfpVendorPartNumber | read-only | current | SFP Vendor Name |
| 1.3.6.1.4.1.7342.2.1.8.1.7 | ColumnportSfpVendorSerialNumber | read-only | current | SFP Serial Number |
| 1.3.6.1.4.1.7342.2.1.8.1.8 | ColumnportSfpDateCode | read-only | current | SFP Date Code |
| 1.3.6.1.4.1.7342.2.1.8.1.9 | ColumnportSfpTemperature | read-only | current | SFP tempearture in degrees Centigrade |
| 1.3.6.1.4.1.7342.2.1.8.1.10 | ColumnportSfpVcc | read-only | current | SFP VCC in volts |
| 1.3.6.1.4.1.7342.2.1.8.1.11 | ColumnportSfpBiasCurrent | read-only | current | SFP Bias Current in millamps |
| 1.3.6.1.4.1.7342.2.1.8.1.12 | ColumnportSfpTxPower | read-only | current | SFP Transmission power in dBm |
| 1.3.6.1.4.1.7342.2.1.8.1.13 | ColumnportSfpRxPower | read-only | current | SFP Transmission power in dBm |
| 1.3.6.1.4.1.7342.2.1.9 | TableuserTable | not-accessible | current | This is a table of SNMPv3 users. |
| 1.3.6.1.4.1.7342.2.1.9.1 | RowuserEntry | not-accessible | current | User table entry. |
| 1.3.6.1.4.1.7342.2.1.9.1.1 | ColumnuserIndex | not-accessible | current | User table index |
| 1.3.6.1.4.1.7342.2.1.9.1.2 | Columnsnmpv3UserName | read-write | current | SNMPv3 user name. |
| 1.3.6.1.4.1.7342.2.1.9.1.3 | Columnsnmpv3SecurityLevel | read-write | current | SNMPv3 security level 0 = undefined 1 = no authentication/no privacy 2 = authentication/no privacy 3 = authentication/privacy |
| 1.3.6.1.4.1.7342.2.1.9.1.4 | Columnsnmpv3AuthPassword | read-write | current | SNMPv3 user authentication password. |
| 1.3.6.1.4.1.7342.2.1.9.1.5 | Columnsnmpv3PrivPassword | read-write | current | SNMPv3 user privacy password. |
| 1.3.6.1.4.1.7342.2.1.9.1.6 | Columnsnmpv3UserType | read-write | current | SNMPv3 User Type 0 = undefined 1 = admin 2 = read-write 3 = read-only 4 = deny |
| 1.3.6.1.4.1.7342.2.1.10 | TableostProtocolStatusTable | not-accessible | current | This table supports the Serial, Telnet, FTP user session status. |
| 1.3.6.1.4.1.7342.2.1.10.1 | RowostProtocolStatusEntry | not-accessible | current | This is a user protocol table entry. |
| 1.3.6.1.4.1.7342.2.1.10.1.1 | ColumnostProtocolStatusIndex | not-accessible | current | An index that is used to identify a specific user protocol session. The index should remain constant until the session is closed. |
| 1.3.6.1.4.1.7342.2.1.10.1.2 | ColumnostProtocolStatusType | read-only | current | This object indicates the specific user protocol session identity state. serial (1) User protocol session type is the serial port telnet (2) User protocol sess… |
| 1.3.6.1.4.1.7342.2.1.10.1.3 | ColumnostProtocolStatusState | read-only | current | This object indicates the status of the specific user protocol session state. inactive(1) User is currently inactive (reserved value, not used) active(2) User … |
| 1.3.6.1.4.1.7342.2.1.10.1.4 | ColumnostProtocoManagementPort | read-only | current | This object indicates the status of the specific user protocol session state. It is not applicable to the 'serial' interface or to a session type that is locke… |
| 1.3.6.1.4.1.7342.2.1.10.1.5 | ColumnostProtocolStatusIpAddress | read-only | current | This object indicates the IP address of the specific user protocol session. It is not applicable to the 'serial' interface or to a session type that is locked … |
| 1.3.6.1.4.1.7342.2.1.10.1.6 | ColumnostProtocolStatusSessionOpenLockTime | read-only | current | The object indicates the time a specific user protocol session has been open or is locked out, in 0.01 seconds, based upon the value of ostProtocolStatusState. |
| 1.3.6.1.4.1.7342.2.1.11 | TableostEnvironmentalStatusTable | not-accessible | current | This table supports the module environmental status objects. |
| 1.3.6.1.4.1.7342.2.1.11.1 | RowostEnvironmentalStatusEntry | not-accessible | current | This is an environmental table entry. |
| 1.3.6.1.4.1.7342.2.1.11.1.1 | ColumnostEnvironmentalPs1Status | read-only | current | This object indicates the status of Power Supply PS1 or PSA. notApplicable(0) Power Supply PS1/PSA is not supported notInstalled(1) Power Supply PS1/PSA is not… |
| 1.3.6.1.4.1.7342.2.1.11.1.2 | ColumnostEnvironmentalPs1VoltageIn | read-only | current | This object indicates PS1/PSA voltage input in millivolts. A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a… |
| 1.3.6.1.4.1.7342.2.1.11.1.3 | ColumnostEnvironmentalPs1VoltageOut | read-only | current | This object indicates PS1/PSA voltage output in millivolts. A value of zero indicates that no voltage is output or the power supply is incapable of supplying a… |
| 1.3.6.1.4.1.7342.2.1.11.1.4 | ColumnostEnvironmentalPs1CurrentOut | read-only | current | This object indicates PS1/PSA current output in millianmps. A value of zero indicates that no current is output or the power supply is incapable of supplying a… |
| 1.3.6.1.4.1.7342.2.1.11.1.5 | ColumnostEnvironmentalPs2Status | read-only | current | This object indicates the status of Power Supply PS2 or PSB. notApplicable(0) Power Supply PS2/PSB is not supported notInstalled(1) Power Supply PS2/PSB is not… |
| 1.3.6.1.4.1.7342.2.1.11.1.6 | ColumnostEnvironmentalPs2VoltageIn | read-only | current | This object indicates PS2/PSB voltage input in millivolts. A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a… |
| 1.3.6.1.4.1.7342.2.1.11.1.7 | ColumnostEnvironmentalPs2VoltageOut | read-only | current | This object indicates PS2/PSB voltage output in millivolts. A value of zero indicates that no voltage is output or the power supply is incapable of supplying a… |
| 1.3.6.1.4.1.7342.2.1.11.1.8 | ColumnostEnvironmentalPs2CurrentOut | read-only | current | This object indicates PS2/PSB current output in millianmps. A value of zero indicates that no current is output or the power supply is incapable of supplying a… |
| 1.3.6.1.4.1.7342.2.1.11.1.9 | ColumnostEnvironmentalTemperature | read-only | current | This object indicates the module internal ambient temperature in degrees centigrade. A value of zero indicates that the current temperature is 0 degrees or the… |
| 1.3.6.1.4.1.7342.2.1.11.1.10 | ColumnostEnvironmentalFan1Status | read-only | current | This object indicates the status of Fan 1. notApplicable(0) Fan 1 is not supported notInstalled(1) Fan 1 is not installed installedNotPowered(2) Fan 1 is insta… |
| 1.3.6.1.4.1.7342.2.1.11.1.11 | ColumnostEnvironmentalFan1Speed | read-only | current | This object indicates the speed of Fan 1 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not suppor… |
| 1.3.6.1.4.1.7342.2.1.11.1.12 | ColumnostEnvironmentalFan2Status | read-only | current | This object indicates the status of Fan 2. notApplicable(0) Fan 2 is not supported notInstalled(1) Fan 2 is not installed installedNotPowered(2) Fan 2 is insta… |
| 1.3.6.1.4.1.7342.2.1.11.1.13 | ColumnostEnvironmentalFan2Speed | read-only | current | This object indicates the speed of Fan 2 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not suppor… |
| 1.3.6.1.4.1.7342.2.1.11.1.14 | ColumnostEnvironmentalFan3Status | read-only | current | This object indicates the status of Fan 3. notApplicable(0) Fan 3 is not supported notInstalled(1) Fan 3 is not installed installedNotPowered(2) Fan 3 is insta… |
| 1.3.6.1.4.1.7342.2.1.11.1.15 | ColumnostEnvironmentalFan3Speed | read-only | current | This object indicates the speed of Fan 3 in RPM (revolutions per minute) A value of zero indicates that the current fan speed is 0 RPM or the fan is not suppor… |
| 1.3.6.1.4.1.7342.3 | IdentityomnitronMIB | Omnitron MIB for use with v5.2 iConverter Management Modules and NetOutlook Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved | ||
| 1.3.6.1.4.1.7342.4 | NodeomnitronConformance | |||
| 1.3.6.1.4.1.7342.4.1 | NodeomnitronCompliances | |||
| 1.3.6.1.4.1.7342.4.1.1 | ComplianceomnitronCompliance | current | The compliance statement for OMNITRON iConverter modules. | |
| 1.3.6.1.4.1.7342.4.2 | NodeomnitronGroups | |||
| 1.3.6.1.4.1.7342.4.2.1 | GroupomnitronGroup | current | A collection of Omnitron objects. | |
| 1.3.6.1.4.1.7342.4.2.2 | GroupomnitronSFPGroup | current | A collection of Omnitron port SFP objects. | |
| 1.3.6.1.4.1.7342.5 | NodeomnitronProducts | |||
| 1.3.6.1.4.1.7342.5.1 | NodemanagementModule |