MIB Viewer

OS-DOT1AG-MIB

61 objects
This MIB is used to configure and monitor 802.1ag management entities for CCM.
OIDNameAccessStatusDescription
1.3.6.1.4.1.629.1.50.22IdentityosDot1agThis MIB is used to configure and monitor 802.1ag management entities for CCM.
1.3.6.1.4.1.629.1.50.22.1NodeosDot1agObjects
1.3.6.1.4.1.629.1.50.22.1.1NodeosDot1agGen
1.3.6.1.4.1.629.1.50.22.1.1.1ScalarosDot1agGenCcmIntervalsread-onlycurrentSupported values of osDot1agMaCcmInterval. Additionally this object serves to indicate whether this MIB is supported by agent.
1.3.6.1.4.1.629.1.50.22.1.1.2ScalarosDot1agGenKeepAliveread-writecurrentCCM keep alive limit. The RMEP fault is detected after timeout with this value plus 0.5. The units of this parameter depend osDot1agMaCcmInterval. For exaample…
1.3.6.1.4.1.629.1.50.22.1.1.3ScalarosDot1agGenAdminStatusread-writecurrentAdministratively assigned state of 802.1ag engine.
1.3.6.1.4.1.629.1.50.22.1.1.4ScalarosDot1agGenDmmStatusread-writecurrentAdministratively assigned generic loopback state of rfc2544 DMM test engine.
1.3.6.1.4.1.629.1.50.22.1.2TableosDot1agMaTablenot-accessiblecurrentThis table allows to configure Maintenance Associations.
1.3.6.1.4.1.629.1.50.22.1.2.1RowosDot1agMaEntrynot-accessiblecurrentContains an entry of the table.
1.3.6.1.4.1.629.1.50.22.1.2.1.1ColumnosDot1agMaIndexnot-accessiblecurrentIndex of the MA table.
1.3.6.1.4.1.629.1.50.22.1.2.1.2ColumnosDot1agMaVlansread-createcurrentCLI command 'vlans LIST-OF-VIDS'
1.3.6.1.4.1.629.1.50.22.1.2.1.3ColumnosDot1agMaPrimaryVlanIdread-createcurrentAdministratively assigned primary VLAN for the MA. If the value equals to 0, then osDot1agMaOperPrimaryVlanId is selected as first item from osDot1agMaVlans. o…
1.3.6.1.4.1.629.1.50.22.1.2.1.4ColumnosDot1agMaOperPrimaryVlanIdread-onlycurrentThe current operational state of the primary VLAN.
1.3.6.1.4.1.629.1.50.22.1.2.1.5ColumnosDot1agMaFormatNameread-createcurrentCLI command name ...
1.3.6.1.4.1.629.1.50.22.1.2.1.6ColumnosDot1agMaNameread-createcurrentCLI command name ... Default equals to osDot1agMaIndex
1.3.6.1.4.1.629.1.50.22.1.2.1.7ColumnosDot1agMaCcmIntervalread-createcurrentCLI command: ccm-interval ...
1.3.6.1.4.1.629.1.50.22.1.2.1.8ColumnosDot1agMaRMepAgingread-createcurrentCLI command: remote-meps aging <0-86400>. The value 0 means 'no aging'.
1.3.6.1.4.1.629.1.50.22.1.2.1.9ColumnosDot1agMaRMepsread-createcurrentCLI command: remote-meps (all|LIST-OF-MEPS)
1.3.6.1.4.1.629.1.50.22.1.2.1.10ColumnosDot1agMaIgnoreRMepsread-createcurrentCLI command: ignore-rmeps (all|LIST-OF-MEPS)
1.3.6.1.4.1.629.1.50.22.1.2.1.11ColumnosDot1agMaCPortsread-createcurrentCLI command: c-ports PORTS-GROUP
1.3.6.1.4.1.629.1.50.22.1.2.1.12ColumnosDot1agMaKeepAliveread-createcurrentCLI command: ccm-keep-alive-number <3-12>
1.3.6.1.4.1.629.1.50.22.1.2.1.60ColumnosDot1agMaCcmClearread-createcurrentCLI command: ccm-clear.
1.3.6.1.4.1.629.1.50.22.1.2.1.99ColumnosDot1agMaAdminSatusread-createcurrent.
1.3.6.1.4.1.629.1.50.22.1.3TableosDot1agMepTablenot-accessiblecurrentThis table is used to manage Maintenance End Points.
1.3.6.1.4.1.629.1.50.22.1.3.1RowosDot1agMepEntrynot-accessiblecurrentContains an entry of the table.
1.3.6.1.4.1.629.1.50.22.1.3.1.1ColumnosDot1agMepIdnot-accessiblecurrentInteger that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a spec…
1.3.6.1.4.1.629.1.50.22.1.3.1.2ColumnosDot1agMepIfIndexread-createcurrentThis object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.
1.3.6.1.4.1.629.1.50.22.1.3.1.3ColumnosDot1agMepDirectionread-createcurrentThe direction in which the MEP faces on the Bridge port. down(1) Sends Continuity Check Messages away from the MAC Relay Entity. Also know as 'outward'. up(2) …
1.3.6.1.4.1.629.1.50.22.1.3.1.4ColumnosDot1agMepPrimaryVlanIdread-createcurrentCLI command: mep <1-4095> primary-vlan <1-4095>
1.3.6.1.4.1.629.1.50.22.1.3.1.5ColumnosDot1agMepActiveread-createcurrentCLI command: mep <1-4095> activate
1.3.6.1.4.1.629.1.50.22.1.3.1.6ColumnosDot1agMepCciEnabledread-createcurrentCLI command: mep <1-4095> ccm-activate
1.3.6.1.4.1.629.1.50.22.1.3.1.7ColumnosDot1agMepLowPrDefread-createcurrentCLI command: mep <1-4095> lowest-alarm-prio
1.3.6.1.4.1.629.1.50.22.1.3.1.8ColumnosDot1agMepFngAlarmTimeread-createcurrentCLI command: mep <1-4095> fng-alarm-time
1.3.6.1.4.1.629.1.50.22.1.3.1.9ColumnosDot1agMepFngResetTimeread-createcurrentCLI command: mep <1-4095> fng-reset-time
1.3.6.1.4.1.629.1.50.22.1.3.1.10ColumnosDot1agMepPriorityread-createcurrentCLI command: mep <1-4095> priority
1.3.6.1.4.1.629.1.50.22.1.3.1.11ColumnosDot1agMepCcmAlarmsread-createcurrentCLI command: mep <1-4095> ccm-alarms all Send nbEthOamCcmAlarm when the MEP fails or recovers fault Send nbEthOamCcmAlarm when the MEP fails (default - no) rec…
1.3.6.1.4.1.629.1.50.22.1.3.1.12ColumnosDot1agMepSendPortTlvread-createcurrentCLI command: mep <1-4095> send-port-tlv
1.3.6.1.4.1.629.1.50.22.1.3.1.13ColumnosDot1agMepSendIfTlvread-createcurrentCLI command: mep <1-4095> send-interface-tlv
1.3.6.1.4.1.629.1.50.22.1.3.1.14ColumnosDot1agMepCcmClearread-createcurrentCLI command: mep <1-4095> clear-ccm-statistics
1.3.6.1.4.1.629.1.50.22.1.3.1.25ColumnosDot1agMepFngStateread-onlycurrent.
1.3.6.1.4.1.629.1.50.22.1.3.1.26ColumnosDot1agMepMacAddressread-onlycurrent.
1.3.6.1.4.1.629.1.50.22.1.3.1.27ColumnosDot1agMepHighestPrDefectread-onlycurrent.
1.3.6.1.4.1.629.1.50.22.1.3.1.28ColumnosDot1agMepDefectsread-onlycurrent.
1.3.6.1.4.1.629.1.50.22.1.3.1.29ColumnosDot1agMepCciSentCcmsread-onlycurrent.
1.3.6.1.4.1.629.1.50.22.1.3.1.30ColumnosDot1agMepCciRecvCcmsread-onlycurrentTotal number of Continuity Check messages transmitted.
1.3.6.1.4.1.629.1.50.22.1.3.1.99ColumnosDot1agMepAdminSatusread-createcurrentTotal number of Continuity Check messages received from all remote MEPs.
1.3.6.1.4.1.629.1.50.22.1.4TableosDot1agRMepTablenot-accessiblecurrentThe MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain.
1.3.6.1.4.1.629.1.50.22.1.4.1RowosDot1agRMepEntrynot-accessiblecurrentThe MEP Database table entry.
1.3.6.1.4.1.629.1.50.22.1.4.1.1ColumnosDot1agRMepIdnot-accessiblecurrentMaintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned.
1.3.6.1.4.1.629.1.50.22.1.4.1.2ColumnosDot1agRMepStateread-onlycurrentThe operational state of the remote MEP IFF State machines.
1.3.6.1.4.1.629.1.50.22.1.4.1.3ColumnosDot1agRMepFailedOkTimeread-onlycurrentThe time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state.
1.3.6.1.4.1.629.1.50.22.1.4.1.4ColumnosDot1agRMepMacAddressread-onlycurrentThe MAC address of the remote MEP.
1.3.6.1.4.1.629.1.50.22.1.4.1.5ColumnosDot1agRMepRdiread-onlycurrentState of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
1.3.6.1.4.1.629.1.50.22.1.4.1.6ColumnosDot1agRMepPortStatusTlvread-onlycurrentAn enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been…
1.3.6.1.4.1.629.1.50.22.1.4.1.7ColumnosDot1agRMepInterfaceStatusTlvread-onlycurrentAn enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no …
1.3.6.1.4.1.629.1.50.22.1.4.1.8ColumnosDot1agRMepRecvCcmsread-onlycurrentTotal number of Continuity Check messages received from this remote MEPs.
1.3.6.1.4.1.629.1.50.22.100NodeosDot1agConformance
1.3.6.1.4.1.629.1.50.22.100.1NodeosDot1agMIBCompliances
1.3.6.1.4.1.629.1.50.22.100.1.1ComplianceosDot1agMIBCompliancecurrentThe core compliance statement for all the implementations.
1.3.6.1.4.1.629.1.50.22.100.2NodeosDot1agMIBGroups
1.3.6.1.4.1.629.1.50.22.100.2.1GrouposDot1agMandatoryGroupcurrent.