OS-ETH-SERV-MIB
282 objects
MEF Ethernet Virtual Connections MIB.
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmCcmInterval Dot1agCfmHighestDefectPri Dot1agCfmLowestAlarmPri Dot1agCfmMaintAssocNameType Dot1agCfmMpDirection VlanId VlanIdOrNone |
| OS-COMMON-TC-MIB | BwAccountStatus CfmMDLevel CoS EntityName EntityNameOrNone EntryValidator MepList oaOptiSwitch OsCfmMepIdOrZero PortIndexOrNone PortList ProfileStatus ServFlowId ServiceType StartTimeType TagList |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926.2.10 | IdentityosEthServ | MEF Ethernet Virtual Connections MIB. | ||
| 1.3.6.1.4.1.6926.2.10.0 | NodeosEthSrvNotifications | |||
| 1.3.6.1.4.1.6926.2.10.0.1 | NotificationosEthSrvMaxNumEnabledServicesExceeded | current | This trap indicates the user tried to enable a service but the number of enabled services has already reached the configured osEthSrvMaxNumEnabledServices valu… | |
| 1.3.6.1.4.1.6926.2.10.1 | NodeosEthCapabilities | |||
| 1.3.6.1.4.1.6926.2.10.1.1 | ScalarosEthSrvFeaturesSupport | read-only | current | Indicates features, that supported by this agent. Additionally this object serves as a SupportValue |
| 1.3.6.1.4.1.6926.2.10.1.2 | ScalarosEthSrvTypesSupported | read-only | deprecated | Indicates features, that supported by this agent. Additionally this object serves as a SupportValue. This object is deprecated. |
| 1.3.6.1.4.1.6926.2.10.1.3 | ScalarosEthMaxSlValue | read-only | current | Maximum service levels, supporting by the device. |
| 1.3.6.1.4.1.6926.2.10.1.10 | ScalarosEthBwMinCIR | read-only | current | Minimum Committed Information Rate. |
| 1.3.6.1.4.1.6926.2.10.1.11 | ScalarosEthBwMaxCIR | read-only | current | Maximum Committed Information Rate. |
| 1.3.6.1.4.1.6926.2.10.1.12 | ScalarosEthBwMinCBS | read-only | current | Minimum Committed Burst Size. |
| 1.3.6.1.4.1.6926.2.10.1.13 | ScalarosEthBwMaxCBS | read-only | current | Maximum Committed Burst Size. |
| 1.3.6.1.4.1.6926.2.10.1.14 | ScalarosEthBwMinEIR | read-only | current | Minimum Excess Information Rate. |
| 1.3.6.1.4.1.6926.2.10.1.15 | ScalarosEthBwMaxEIR | read-only | current | Maximum Excess Information Rate. |
| 1.3.6.1.4.1.6926.2.10.1.16 | ScalarosEthBwMinEBS | read-only | current | Maximum Excess Burst Size. |
| 1.3.6.1.4.1.6926.2.10.1.17 | ScalarosEthBwMaxEBS | read-only | current | Maximum Excess Burst Size. |
| 1.3.6.1.4.1.6926.2.10.1.18 | ScalarosEthSrvFsSupported | read-only | current | Describes what attach points in a service are a valid choice for attaching a Flow Sampler |
| 1.3.6.1.4.1.6926.2.10.1.19 | ScalarosEthSrvMaxNumEnabledServices | read-write | current | Maximum number of enabled services. The value '0' means 'unlimited' |
| 1.3.6.1.4.1.6926.2.10.2 | TableosEthServTable | not-accessible | current | Eth UNI per EVC (service) configuration table. |
| 1.3.6.1.4.1.6926.2.10.2.1 | RowosEthServEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.2.1.1 | ColumnosEthServId | not-accessible | current | Service Identifier. |
| 1.3.6.1.4.1.6926.2.10.2.1.2 | ColumnosEthServNodeType | read-write | current | Type of the service |
| 1.3.6.1.4.1.6926.2.10.2.1.4 | ColumnosEthServSVlanId | read-write | current | S-VLAN - Service VLAN (also referred to as Provider VLAN). Obsolete by osEthServVcSVlanId, deperecated but is not deleted for backward compatibility. For UNI s… |
| 1.3.6.1.4.1.6926.2.10.2.1.5 | ColumnosEthServCVlans | read-write | current | Set of CE-VLANs: CE-VLAN ID/EVC Map Service Attribute |
| 1.3.6.1.4.1.6926.2.10.2.1.6 | ColumnosEthServIncludesUntagged | read-write | current | True indicates that the service may accept untagged frames from the side of osEthServCPorts. |
| 1.3.6.1.4.1.6926.2.10.2.1.7 | ColumnosEthServChangeIngCVlan | read-write | current | Changes ingress CVLan. Deprecated. |
| 1.3.6.1.4.1.6926.2.10.2.1.9 | ColumnosEthServSPorts | read-write | current | Set of ports, dedicated to the provider (NNI). In the case of UNI-N there will be only one port. |
| 1.3.6.1.4.1.6926.2.10.2.1.10 | ColumnosEthServCPorts | read-write | current | Set of ports, dedicated to the customer (UNI). In the case of UNI-C there will be only one port. |
| 1.3.6.1.4.1.6926.2.10.2.1.11 | ColumnosEthServClassifyFlowBy | read-write | deprecated | Multiplex according to DSCP, VPT p_bits, both or the port priority. The value none(2) means, that any classification will not be done, and there will be only o… |
| 1.3.6.1.4.1.6926.2.10.2.1.12 | ColumnosEthServLoopback | read-write | current | Option of loopback on s-ports. reflect - all egress packets are redirected back to egress port. macSwap - all egress multicast and broadcast packets are redire… |
| 1.3.6.1.4.1.6926.2.10.2.1.13 | ColumnosEthServLearning | read-write | current | L2 Learning mode of the service. |
| 1.3.6.1.4.1.6926.2.10.2.1.15 | ColumnosEthServMDLevel | read-write | current | The Maintenance Domain Level. Obsolete by osEthServVcMDLevel, deperecated but is not deleted for backward compatibility. |
| 1.3.6.1.4.1.6926.2.10.2.1.16 | ColumnosEthServMAIndex | read-write | current | Parallel to dot1agCfmMaIndex: a reference to a particular Maintenance Domain managed object. Obsolete by osEthServVcMAIndex, deperecated but is not deleted for… |
| 1.3.6.1.4.1.6926.2.10.2.1.18 | ColumnosEthServMepPortIndex | read-write | current | Parallel to dot1agCfmMepIfIndex: this object is the port index of the port either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to whic… |
| 1.3.6.1.4.1.6926.2.10.2.1.19 | ColumnosEthServMepDirection | read-write | current | Parallel to Dot1agCfmMpDirection: the direction in which the MEP faces on the Bridge port. down(1) Sends Continuity Check Messages away from the MAC Relay Enti… |
| 1.3.6.1.4.1.6926.2.10.2.1.20 | ColumnosEthServSpokeVcName | read-write | current | deprecated! Name of virtual-circuit, dedicated to the provider (NNI). |
| 1.3.6.1.4.1.6926.2.10.2.1.21 | ColumnosEthServSpokeVcType | read-write | current | deprecated! Type of virtual-circuit. |
| 1.3.6.1.4.1.6926.2.10.2.1.22 | ColumnosEthServSpokeVcOuterVlan | read-write | current | deprecated! Indicates if the passenger packet on the vitual-circuit should contain the outer vlan header or not. For UNI service the outer vlan is the s-vlan f… |
| 1.3.6.1.4.1.6926.2.10.2.1.40 | ColumnosEthServCfmPrfl | read-write | current | Profile ID to 802.1ag/ITU 1731 CCM configuration. Points to osEthCfmTable. |
| 1.3.6.1.4.1.6926.2.10.2.1.41 | ColumnosEthServCcmEnabled | read-write | current | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.6926.2.10.2.1.42 | ColumnosEthServCcmHighestPrDefect | read-only | current | This object reflects dot1agCfmMepHighestPrDefect. The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine w… |
| 1.3.6.1.4.1.6926.2.10.2.1.43 | ColumnosEthServCcmCoS | read-write | current | The Class of Service of the CCM packets, generated by the service. |
| 1.3.6.1.4.1.6926.2.10.2.1.44 | ColumnosEthServCcmClean | read-write | current | When an agent receives this object with value of true(1) in SNMP SET operation, it resets values dot1agCfmMepFngState, dot1agCfmMepHighestPrDefect, dot1agCfmMe… |
| 1.3.6.1.4.1.6926.2.10.2.1.45 | ColumnosEthServEgrMarkSl | read-write | current | Egress mark service level. The value '0' means 'no change'. |
| 1.3.6.1.4.1.6926.2.10.2.1.46 | ColumnosEthServDnEgPcpRemap | read-write | current | Define PCP remapping scheme for downstream. Every 4 bits represent a mapping of the packet's PCP to a new PCP. Least significant bits 0..3 represent the new PC… |
| 1.3.6.1.4.1.6926.2.10.2.1.52 | ColumnosEthServActionPrfl | read-write | current | Profile ID to extendex actions configuration. Points to osEthActEntry |
| 1.3.6.1.4.1.6926.2.10.2.1.56 | ColumnosEthServProtectionRole | read-only | current | Indicate if the table entry relates to the primary service row or to the protection service row |
| 1.3.6.1.4.1.6926.2.10.2.1.57 | ColumnosEthServPVlanId | read-write | current | CLI: p-vlan. |
| 1.3.6.1.4.1.6926.2.10.2.1.58 | ColumnosEthServPPortList | read-write | current | CLI: p-ports. |
| 1.3.6.1.4.1.6926.2.10.2.1.64 | ColumnosEthServLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.2.1.65 | ColumnosEthServDescription | read-write | current | Description of the service |
| 1.3.6.1.4.1.6926.2.10.2.1.70 | ColumnosEthServNatPfExternalMode | read-write | current | When interface is used for NAT port-forwarding external management, the value externalMngIf works as CLI-command 'nat-service'. |
| 1.3.6.1.4.1.6926.2.10.2.1.98 | ColumnosEthServAdminStatus | read-write | current | Values lock(7), unLock(8) and cancelLocking(9) are dedicated to allow to change critical objects in enabled service. The typical example of critical object is … |
| 1.3.6.1.4.1.6926.2.10.2.1.99 | ColumnosEthServOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.3 | TableosEthServClassTable | not-accessible | current | Mapping {service, (dscp|pcp|tag)} -> CoS. This table allows to map traffic of servies to flows. Resulting CoS is a second index in OsEthServFlowTable. |
| 1.3.6.1.4.1.6926.2.10.3.1 | RowosEthServClassEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.3.1.3 | ColumnosEthServClassMethod | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.3.1.4 | ColumnosEthServClassValue | not-accessible | current | The semantic of this object depends on osEthServClassMethod. |
| 1.3.6.1.4.1.6926.2.10.3.1.5 | ColumnosEthServClassCoS | read-write | current | Target CoS. |
| 1.3.6.1.4.1.6926.2.10.3.1.98 | ColumnosEthServClassAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.10 | TableosEthServFlowTable | not-accessible | current | When Servise Level (CoS) has just been computed, this table allows to apply it for relevant profiles. |
| 1.3.6.1.4.1.6926.2.10.10.1 | RowosEthServFlowEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.10.1.5 | ColumnosEthServFlowId | not-accessible | current | The value 0 means, that this entry corresponds to the service, not to to any flow. |
| 1.3.6.1.4.1.6926.2.10.10.1.6 | ColumnosEthServFlowIngBwPrfl | read-write | current | Ingress bandwidth profile applied to C-Ports to ensure rate limiting. This object points to the osEthBwTable. |
| 1.3.6.1.4.1.6926.2.10.10.1.7 | ColumnosEthServFlowIngBwAccStatus | read-write | current | Status of ingress accounting for the flow |
| 1.3.6.1.4.1.6926.2.10.10.1.10 | ColumnosEthServFlowEgBwPrfl | read-write | current | Egress bandwidth profile applied to S-Ports to ensure rate limiting. This object points to the osEthBwTable. |
| 1.3.6.1.4.1.6926.2.10.10.1.11 | ColumnosEthServFlowEgBwAccStatus | read-write | current | Status of egress accounting for the flow |
| 1.3.6.1.4.1.6926.2.10.10.1.12 | ColumnosEthServFlowFloodLimPrfl | read-write | current | Profile of Flood limit configuration. Points to osEthFloodPrflTable. |
| 1.3.6.1.4.1.6926.2.10.10.1.15 | ColumnosEthServFlowPerfPrfl | read-write | current | Profile of Performance configuration. Points to osEthPerfTable |
| 1.3.6.1.4.1.6926.2.10.10.1.16 | ColumnosEthServFlowMepId | read-write | current | MEP Id for Profile of Performance tests of the flow. |
| 1.3.6.1.4.1.6926.2.10.10.1.17 | ColumnosEthServFlowMepReserve1 | read-write | current | For debug and backward compatibility. Must be deleted or replaced in the future. |
| 1.3.6.1.4.1.6926.2.10.10.1.19 | ColumnosEthServFlowPerfDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column osEthServFlowPerfDestTy… |
| 1.3.6.1.4.1.6926.2.10.10.1.20 | ColumnosEthServFlowPerfDestMepId | read-write | current | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used i… |
| 1.3.6.1.4.1.6926.2.10.10.1.21 | ColumnosEthServFlowPerfDestMepList | read-write | current | List of The Maintenance association End Point Identifiers. This object will be used if the value of the column osEthServFlowPerfDestType is 'listOfRMeps'. |
| 1.3.6.1.4.1.6926.2.10.10.1.22 | ColumnosEthServFlowPerfDestType | read-write | current | Describes type of destination used. Flag indicating if the destination is specified by destination MEP ID, by destination MAC address or by list of destination… |
| 1.3.6.1.4.1.6926.2.10.10.1.23 | ColumnosEthServFlowPerfEnabled | read-write | current | To start/stop Performance test for the flow. |
| 1.3.6.1.4.1.6926.2.10.10.1.24 | ColumnosEthServFlowRemarkBits | read-write | current | The bit reserved(0) is not used. |
| 1.3.6.1.4.1.6926.2.10.10.1.26 | ColumnosEthServFlowMarkDscp | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.10.1.27 | ColumnosEthServFlowMarkPcp | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.10.1.30 | ColumnosEthServFlowRestOfTraffic | read-write | current | Define a flow as 'rest of traffic' one. Only one flow can have this feature. Thus when the value True is set for any flow, agent automatically reset this objec… |
| 1.3.6.1.4.1.6926.2.10.10.1.40 | ColumnosEthServFlowLbmPrfl | read-write | current | Profile of LBM configuration. Points to osEthLbmTable |
| 1.3.6.1.4.1.6926.2.10.10.1.41 | ColumnosEthServFlowLbmDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted. This address will be used if the value of the column osEthServFlowLbmDestType is 'macAddress'. |
| 1.3.6.1.4.1.6926.2.10.10.1.42 | ColumnosEthServFlowLbmDestMepId | read-write | current | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used i… |
| 1.3.6.1.4.1.6926.2.10.10.1.43 | ColumnosEthServFlowLbmDestType | read-write | current | Describes type of destination used for LBM. |
| 1.3.6.1.4.1.6926.2.10.10.1.44 | ColumnosEthServFlowLbmEnabled | read-write | current | To start/stop LBM test for the flow. |
| 1.3.6.1.4.1.6926.2.10.10.1.45 | ColumnosEthServFlowLbmClear | read-write | current | This object when written clears the LBM history and result tables and statistics. |
| 1.3.6.1.4.1.6926.2.10.10.1.55 | ColumnosEthServFlowUpEgBwPrfl | read-write | current | Profile ID to upstream egress bandwith configuration. It allows to limit traffic, departing from S-Ports. Points to osEthBwTable. |
| 1.3.6.1.4.1.6926.2.10.10.1.56 | ColumnosEthServFlowUpEgBwAccStatus | read-write | current | Status of upstream egress accounting for the flow. It allows to count traffic, departing from S-Ports. |
| 1.3.6.1.4.1.6926.2.10.10.1.58 | ColumnosEthServFlowDnEgBwPrfl | read-write | current | Profile ID to downstream egress bandwith configuration. It allows to limit traffic, departing from C-Ports. Points to osEthBwTable |
| 1.3.6.1.4.1.6926.2.10.10.1.59 | ColumnosEthServFlowDnEgBwAccStatus | read-write | current | Status of downstream egress accounting for the flow. It allows to count traffic, departing from C-Ports. |
| 1.3.6.1.4.1.6926.2.10.10.1.60 | ColumnosEthServFlowUpIngFsPrfl | read-write | current | Profile ID to upstream ingress flow sampling configuration. It allows sampling traffic, arriving to C-Ports. Points to osEthFsTable |
| 1.3.6.1.4.1.6926.2.10.10.1.61 | ColumnosEthServFlowDnIngFsPrfl | read-write | current | Profile ID to downstream ingress flow sampling configuration. It allows sampling traffic, arriving to S-Ports. Points to osEthFsTable |
| 1.3.6.1.4.1.6926.2.10.10.1.62 | ColumnosEthServFlowUpIngFsSubAgentId | read-write | current | Sub agent ID of upstream ingress flow sampling. |
| 1.3.6.1.4.1.6926.2.10.10.1.63 | ColumnosEthServFlowDnIngFsSubAgentId | read-write | current | Sub agent ID of downstream ingress flow sampling. |
| 1.3.6.1.4.1.6926.2.10.10.1.64 | ColumnosEthServFlowUpstrDEI | read-write | current | Upstream drop eligibility indicator sensitivity. The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will have Drop precedence 'yellow'. The val… |
| 1.3.6.1.4.1.6926.2.10.10.1.65 | ColumnosEthServFlowDownstrDEI | read-write | current | Downstream drop eligibility indicator sensitivity. The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will have Drop precedence 'yellow'. The v… |
| 1.3.6.1.4.1.6926.2.10.10.1.97 | ColumnosEthServFlowHistoryClear | read-write | current | This object when written clears the Delay Measurement history tables - all rows are deleted. When read the value always returns 'false'. Writing this value doe… |
| 1.3.6.1.4.1.6926.2.10.10.1.98 | ColumnosEthServFlowAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.11 | TableosEthServVcTable | not-accessible | current | This table contains all parameters of EVC/OVC. The service must have the same values of these objects on every devices. |
| 1.3.6.1.4.1.6926.2.10.11.1 | RowosEthServVcEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.11.1.10 | ColumnosEthServVcType | read-write | current | Defines a network role of the service. This object has no effect on the configuration inside the node. |
| 1.3.6.1.4.1.6926.2.10.11.1.11 | ColumnosEthServVcSVlanId | read-write | current | S-VLAN - Service VLAN (also referred to as Provider VLAN). For UNI services this parameter means q-in-q tunneling tag stacking parameter. For all types of serv… |
| 1.3.6.1.4.1.6926.2.10.11.1.15 | ColumnosEthServVcMDLevel | read-write | current | The Maintenance Domain Level. |
| 1.3.6.1.4.1.6926.2.10.11.1.16 | ColumnosEthServVcMAIndex | read-write | current | Parallel to dot1agCfmMaIndex: a reference to a particular Maintenance Domain managed object. |
| 1.3.6.1.4.1.6926.2.10.11.1.17 | ColumnosEthServVcMaTypeName | read-write | current | The type (and thereby format) of the Maintenance Association Name. |
| 1.3.6.1.4.1.6926.2.10.11.1.18 | ColumnosEthServVcMaName | read-write | current | The Short Maintenance Association name. The type/format of this object is determined by the value of the osEthServVcMaTypeName object. Default: name of the Ser… |
| 1.3.6.1.4.1.6926.2.10.11.1.19 | ColumnosEthServVcMtuSize | read-write | current | Bind MTU size for the virtual interface. |
| 1.3.6.1.4.1.6926.2.10.12 | TableosEthServFlowTestParamTable | not-accessible | current | PM Test parameters |
| 1.3.6.1.4.1.6926.2.10.12.1 | RowosEthServFlowTestParamEntry | not-accessible | current | Contains en entry of the table. |
| 1.3.6.1.4.1.6926.2.10.12.1.1 | ColumnosEthServFlowTestType | not-accessible | current | Test type. |
| 1.3.6.1.4.1.6926.2.10.12.1.2 | ColumnosEthServFlowTestStartTimeType | read-create | current | This attribute specifies the type of start time of the PM Test. The start time can immediate, relative, or fixed. The value of 'immediate' means that Performan… |
| 1.3.6.1.4.1.6926.2.10.12.1.3 | ColumnosEthServFlowTestFixedStartTime | read-create | current | This attribute specifies the fixed start date/time for the PM Test. This attribute is used only used if osEthServFlowTestStartTimeType is 'fixed' and is ignore… |
| 1.3.6.1.4.1.6926.2.10.12.1.4 | ColumnosEthServFlowTestRelStartTime | read-create | current | This attribute specifies the relative start time, from the current system time, for the PM Test. This attribute is used only if osEthServFlowTestStartTimeType … |
| 1.3.6.1.4.1.6926.2.10.12.1.5 | ColumnosEthServFlowTestPeriodicity | read-create | current | This attribute specifies a configurable periodicity time per Test. The periodicity time can be specified as none (value of 0) or in relative time (e.g., every … |
| 1.3.6.1.4.1.6926.2.10.13 | TableosEthBwTable | not-accessible | current | This table contains Bandwidth Profiles. |
| 1.3.6.1.4.1.6926.2.10.13.1 | RowosEthBwEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.13.1.1 | ColumnosEthBwId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.13.1.2 | ColumnosEthBwCIR | read-write | current | Committed Information Rate. |
| 1.3.6.1.4.1.6926.2.10.13.1.3 | ColumnosEthBwCBS | read-write | current | Committed Burst Size. |
| 1.3.6.1.4.1.6926.2.10.13.1.4 | ColumnosEthBwEIR | read-write | current | Excess Information Rate. |
| 1.3.6.1.4.1.6926.2.10.13.1.5 | ColumnosEthBwEBS | read-write | current | Excess Burst Size. |
| 1.3.6.1.4.1.6926.2.10.13.1.10 | ColumnosEthBwColorMode | read-write | current | CLI commands: 'color-mode (blind|aware|drop-red|blind-and-drop-red|aware-and-drop-red)' 'no color-mode (blind|aware|drop-red|blind-and-drop-red|aware-and-drop-… |
| 1.3.6.1.4.1.6926.2.10.13.1.11 | ColumnosEthBwLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.13.1.12 | ColumnosEthBwRateLimitType | read-write | current | shaper(1) means, that BW limit uses shaper, tc(2) - traffic conditioner. |
| 1.3.6.1.4.1.6926.2.10.13.1.13 | ColumnosEthBwAggregated | read-write | current | Common usage of this profile by several services or and flow. |
| 1.3.6.1.4.1.6926.2.10.13.1.14 | ColumnosEthBwBuffSize | read-write | current | Queue buffer size. The value '0' means 'default'. The default value vary for different devices: OS-V8 has default value 262144 bytes, OS-V20 has default value … |
| 1.3.6.1.4.1.6926.2.10.13.1.98 | ColumnosEthBwAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.13.1.99 | ColumnosEthBwOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.14 | TableosEthPerfTable | not-accessible | current | This table contains Performance Profiles. |
| 1.3.6.1.4.1.6926.2.10.14.1 | RowosEthPerfEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.14.1.3 | ColumnosEthPerfId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.14.1.4 | ColumnosEthPerfType | read-write | current | This object defines a protocol of Frame Delay Measurement.The values mean: dmm - two-way ETH-DM (ITU-T Y.1731, Clause 8.2.2) dmmSlow - the same as dmm, but les… |
| 1.3.6.1.4.1.6926.2.10.14.1.12 | ColumnosEthPerfVlanDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. |
| 1.3.6.1.4.1.6926.2.10.14.1.17 | ColumnosEthPerfHistorySize | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.14.1.18 | ColumnosEthPerfInterval | read-write | current | Inter-frame delay between transmitting of Loopback frames to the destination |
| 1.3.6.1.4.1.6926.2.10.14.1.19 | ColumnosEthPerfTimeout | read-write | current | Timeout for the arrival of Loopback reply |
| 1.3.6.1.4.1.6926.2.10.14.1.20 | ColumnosEthPerfDataLength | read-write | current | Loopback message data length. Used to send Loopback messages in different lengths |
| 1.3.6.1.4.1.6926.2.10.14.1.21 | ColumnosEthPerfDataFill | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.14.1.23 | ColumnosEthPerfMessages | read-write | current | The number of messages in a burst |
| 1.3.6.1.4.1.6926.2.10.14.1.24 | ColumnosEthPerfBurstInterval | read-write | current | Interval between bursts. |
| 1.3.6.1.4.1.6926.2.10.14.1.25 | ColumnosEthPerfNumberOfBursts | read-write | current | Number of bursts in the test. The value 0 means continuous test. |
| 1.3.6.1.4.1.6926.2.10.14.1.26 | ColumnosEthPerfMeasBinsInterval | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.14.1.27 | ColumnosEthPerfMeasBinsIsAlign | read-write | current | A SOAM implementation should align the start of a measurement interval on osEthPerfMeasBinsInterval boundary of the local time-of-day clock. |
| 1.3.6.1.4.1.6926.2.10.14.1.28 | ColumnosEthPerfMeasBinsClockSyncFlag | read-write | current | This attribute specifies whether the clocks for both end points are synchronized. This attribute controls whether one-way measurements are computed. |
| 1.3.6.1.4.1.6926.2.10.14.1.29 | ColumnosEthPerfMeasBinsHistorySize | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.14.1.35 | ColumnosEthPerfFdRiseThold | read-write | current | Frame delay (Average of Round Trip Time) Rising threshold. Value 0 means, that this the agent will not check this tipe of threshold. |
| 1.3.6.1.4.1.6926.2.10.14.1.36 | ColumnosEthPerfFdFallThold | read-write | current | Frame delay (Average of Round Trip Time) Falling threshold |
| 1.3.6.1.4.1.6926.2.10.14.1.49 | ColumnosEthPerfDSJittRiseThold | read-write | current | Destination-Source positive jitter Rising threshold. Value 0 means, that this the agent will not check this tipe of threshold. |
| 1.3.6.1.4.1.6926.2.10.14.1.50 | ColumnosEthPerfDSJittFallThold | read-write | current | Destination-Source positive jitter Falling threshold. |
| 1.3.6.1.4.1.6926.2.10.14.1.63 | ColumnosEthPerfSDJittRiseThold | read-write | current | Source-Destination positive jitter Rising threshold. Value 0 means, that this the agent will not check this tipe of threshold. |
| 1.3.6.1.4.1.6926.2.10.14.1.64 | ColumnosEthPerfSDJittFallThold | read-write | current | Source-Destination positive jitter Falling threshold. |
| 1.3.6.1.4.1.6926.2.10.14.1.65 | ColumnosEthPerfLastError | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.14.1.98 | ColumnosEthPerfAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.14.1.99 | ColumnosEthPerfOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.15 | TableosEthCfmTable | not-accessible | current | This table contains Connectivity Fault management Profiles. |
| 1.3.6.1.4.1.6926.2.10.15.1 | RowosEthCfmEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.15.1.3 | ColumnosEthCfmId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.15.1.5 | ColumnosEthCcmLowPrDef | read-write | current | An integer value specifying the lowest priority defect that is allowed to generate fault alarm. |
| 1.3.6.1.4.1.6926.2.10.15.1.6 | ColumnosEthCcmFngAlarmTime | read-write | current | This object reflects dot1agCfmMepFngAlarmTime. The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). |
| 1.3.6.1.4.1.6926.2.10.15.1.7 | ColumnosEthCcmFngResetTime | read-write | current | This object reflects dot1agCfmMepFngResetTime. The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s). |
| 1.3.6.1.4.1.6926.2.10.15.1.9 | ColumnosEthCcmMaCcmInterval | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.15.1.10 | ColumnosEthCcmMaCcmRMepAgingTime | read-write | current | This attribute defines a period of time after which an instance in the dot1agCfmMepDbTable is removed if a valid CCM has not been received by the local MEP, i.… |
| 1.3.6.1.4.1.6926.2.10.15.1.11 | ColumnosEthCcmSendPortTlv | read-write | current | Indicates whether a Port Status TLV is included in CCM frame transmission. A value of 'true' indicates that the Port Status TLV is to be included. A value of '… |
| 1.3.6.1.4.1.6926.2.10.15.1.12 | ColumnosEthCcmSendIfTlv | read-write | current | Indicates whether a Interface Status TLV is included in CCM frame transmission. A value of 'true' indicates that the Interface Status TLV is to be included. A … |
| 1.3.6.1.4.1.6926.2.10.15.1.13 | ColumnosEthCfmLtrPortIdSubtype | read-write | current | Port ID Subtype to encode TLVs in LTR. CLI command is '[no ]ltr-port-id-subtype (mac|name|alias|)'. |
| 1.3.6.1.4.1.6926.2.10.15.1.70 | ColumnosEthCfmLastError | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.15.1.98 | ColumnosEthCfmAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.15.1.99 | ColumnosEthCfmOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.16 | TableosEthActTable | not-accessible | current | This table contains Actions Profiles. |
| 1.3.6.1.4.1.6926.2.10.16.1 | RowosEthActEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.16.1.1 | ColumnosEthActId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.16.1.2 | ColumnosEthActToCPU | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.16.1.5 | ColumnosEthActMirrorPortMode | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.16.1.6 | ColumnosEthActMirrorPortIndex | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.16.1.18 | ColumnosEthActSwapCTag | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.16.1.98 | ColumnosEthActAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.16.1.99 | ColumnosEthActOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.17 | TableosEthFloodPrflTable | not-accessible | current | This table allows to configure flood limit profiles. |
| 1.3.6.1.4.1.6926.2.10.17.1 | RowosEthFloodPrflEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.17.1.1 | ColumnosEthFloodPrflId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.17.1.2 | ColumnosEthFloodPrflTypes | read-create | current | Types of traffic to be limited. |
| 1.3.6.1.4.1.6926.2.10.17.1.3 | ColumnosEthFloodPrflRate | read-create | current | Permitted rate in k. |
| 1.3.6.1.4.1.6926.2.10.17.1.70 | ColumnosEthFloodPrflLastError | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.17.1.98 | ColumnosEthFloodPrflAdminStatus | read-create | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.17.1.99 | ColumnosEthFloodPrflBwOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.18 | TableosEthLbmTable | not-accessible | current | This table contains Ethernet Loopback Messages Profiles. |
| 1.3.6.1.4.1.6926.2.10.18.1 | RowosEthLbmEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.18.1.3 | ColumnosEthLbmId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.18.1.17 | ColumnosEthLbmHistorySize | read-write | current | Bumber of burts, held in the history table. |
| 1.3.6.1.4.1.6926.2.10.18.1.18 | ColumnosEthLbmInterval | read-write | current | Inter-frame delay between transmitting of Loopback frames to the destination |
| 1.3.6.1.4.1.6926.2.10.18.1.19 | ColumnosEthLbmTimeout | read-write | current | Timeout for the arrival of Loopback reply |
| 1.3.6.1.4.1.6926.2.10.18.1.20 | ColumnosEthLbmDataLength | read-write | current | Loopback message data length. Used to send Loopback messages in different lengths |
| 1.3.6.1.4.1.6926.2.10.18.1.21 | ColumnosEthLbmDataFill | read-write | current | mefSoamLbCfgDataPattern in MEF-SOAM-FM-MIB.txt and MefSoamTcDataPatternType in MEF-SOAM-TC-MIB.txt |
| 1.3.6.1.4.1.6926.2.10.18.1.23 | ColumnosEthLbmMessages | read-write | current | The number of messages in a burst |
| 1.3.6.1.4.1.6926.2.10.18.1.24 | ColumnosEthLbmBurstInterval | read-write | current | Interval between bursts. |
| 1.3.6.1.4.1.6926.2.10.18.1.25 | ColumnosEthLbmNumberOfBursts | read-write | current | Number of bursts in the test. The value 0 means continuous test. |
| 1.3.6.1.4.1.6926.2.10.18.1.26 | ColumnosEthLbmLbmHistSize | read-write | current | Number of Lbm groups, held in LbrTable. |
| 1.3.6.1.4.1.6926.2.10.18.1.27 | ColumnosEthLbmLbrPerLbmHistSize | read-write | current | Number of Lbr entries, held in Lbm group in LbrTable. |
| 1.3.6.1.4.1.6926.2.10.18.1.65 | ColumnosEthLbmLastError | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.18.1.98 | ColumnosEthLbmAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.18.1.99 | ColumnosEthLbmOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.19 | TableosEthServLbrTable | not-accessible | current | Rows in this table are automatically created, a new row for each response from a loopback request. |
| 1.3.6.1.4.1.6926.2.10.19.1 | RowosEthServLbrEntry | not-accessible | current | The conceptual row of osEthServLbrTable. |
| 1.3.6.1.4.1.6926.2.10.19.1.1 | ColumnosEthServLbrLbmId | not-accessible | current | Loopback transaction identifier returned by a previous loopback message command, indicating which loopback request is returned. it is an analog of mefSoamLbrMu… |
| 1.3.6.1.4.1.6926.2.10.19.1.2 | ColumnosEthServLbrPerLbmId | not-accessible | current | An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. osEthServLbrPerLbmId are assigned sequentially from 1, in the… |
| 1.3.6.1.4.1.6926.2.10.19.1.3 | ColumnosEthServLbrReplyMac | read-only | current | Source MAC address returned in the LBR Ethernet frame. |
| 1.3.6.1.4.1.6926.2.10.19.1.4 | ColumnosEthServLbrPort | read-only | current | The port through which it was received. |
| 1.3.6.1.4.1.6926.2.10.19.1.5 | ColumnosEthServLbrTime | read-only | current | The time when it was received. |
| 1.3.6.1.4.1.6926.2.10.19.1.6 | ColumnosEthServLbrRtt | read-only | current | Round Trip Time. |
| 1.3.6.1.4.1.6926.2.10.21 | TableosEthFsTable | not-accessible | current | This table contains Flow Sampling Profiles. |
| 1.3.6.1.4.1.6926.2.10.21.1 | RowosEthFsEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.21.1.1 | ColumnosEthFsId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.10.21.1.2 | ColumnosEthFsReceiver | read-write | current | Index of an sFlow receiver. Samplers created from this profile will send captured samples to this receiver. |
| 1.3.6.1.4.1.6926.2.10.21.1.3 | ColumnosEthFsChannel | read-write | current | An sFlow channel. Samplers created from this profile will be attached to that channel. |
| 1.3.6.1.4.1.6926.2.10.21.1.4 | ColumnosEthFsRateUnit | read-write | current | Specifies the units in which sampling rate is measured |
| 1.3.6.1.4.1.6926.2.10.21.1.5 | ColumnosEthFsRateWndSize | read-write | current | Windows size for sampling rate. A single packet will be sampled from each window. |
| 1.3.6.1.4.1.6926.2.10.21.1.6 | ColumnosEthFsLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.21.1.98 | ColumnosEthFsAdminStatus | read-write | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.10.21.1.99 | ColumnosEthFsOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.24 | NodeosEthTagExcpConfig | |||
| 1.3.6.1.4.1.6926.2.10.24.1 | ScalarosEthTagExcpSupport | read-only | current | Indicates features, that supported by this agent for this feature. If the GET for osEthTagExcpSupport returns 'NoSuchObjec', then the does not support osEthTag… |
| 1.3.6.1.4.1.6926.2.10.24.24 | TableosEthTagExcpTable | not-accessible | current | tbd. |
| 1.3.6.1.4.1.6926.2.10.24.24.1 | RowosEthTagExcpEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.2 | ColumnosEthTagExcpCVlan | not-accessible | current | Must belong to osEthServCVlans. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.3 | ColumnosEthTagExcpCPorts | read-create | current | Must belong to osEthServCPorts. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.4 | ColumnosEthTagExcpMAIndex | read-create | current | Parallel to osEthServVcMAIndex: an index of MA. The value 0 means - don't build MA for the current instance. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.5 | ColumnosEthTagExcpMepId | read-create | current | . |
| 1.3.6.1.4.1.6926.2.10.24.24.1.6 | ColumnosEthTagExcpMepPortIndex | read-create | current | See osEthServMepPortIndex. If osEthTagExcpMepPortIndex equal to 0, then the MEP is created as inward with 'virtual' port and both send-port-tlv and send-if-tlv… |
| 1.3.6.1.4.1.6926.2.10.24.24.1.7 | ColumnosEthTagExcpMepDirection | read-create | current | See osEthServMepDirection. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.8 | ColumnosEthTagExcpCcmEnabled | read-create | current | See osEthServCcmEnabled. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.9 | ColumnosEthTagExcpCcmCoS | read-create | current | osEthServCcmCoS. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.10 | ColumnosEthTagExcpCcmClean | read-create | current | See osEthServCcmClean. On GET is returned always false(2). |
| 1.3.6.1.4.1.6926.2.10.24.24.1.11 | ColumnosEthTagExcpCfmPrfl | read-create | current | See osEthServCfmPrfl. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.13 | ColumnosEthTagExcpMaTypeName | read-create | current | See osEthServVcMaTypeName. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.14 | ColumnosEthTagExcpMaName | read-create | current | See osEthServVcMaName. By default equals to name of the service. |
| 1.3.6.1.4.1.6926.2.10.24.24.1.99 | ColumnosEthTagExcpAdminStatus | read-create | current | Allows to create new rows or delete old rows. On GET always returns nothing(2). |
| 1.3.6.1.4.1.6926.2.10.30 | TableosEthServCountTable | not-accessible | current | This table contains bandwith counters of services and flows. If service/flow does not use bandwith profile or uses a bandwith profile with disabled accounting,… |
| 1.3.6.1.4.1.6926.2.10.30.1 | RowosEthServCountEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.30.1.1 | ColumnosEthServFlowCountId | not-accessible | current | The value 0 means, that this entry corresponds to the service, not to to any flow. |
| 1.3.6.1.4.1.6926.2.10.30.1.2 | ColumnosEthServFlowCountDir | not-accessible | current | The direction of banwidth rate limit. |
| 1.3.6.1.4.1.6926.2.10.30.1.3 | ColumnosEthServFlowCountStatus | read-only | current | Current status of the entry, describes a set of relevant counters. |
| 1.3.6.1.4.1.6926.2.10.30.1.9 | ColumnosEthServFlowCountAggrOcts | read-only | current | Counter for the total number of bytes (all colors). If osEthServFlowCountStatus does not contain a hasAggregateOcts, then this counter is always equal to zero |
| 1.3.6.1.4.1.6926.2.10.30.1.10 | ColumnosEthServFlowCountAggrPkts | read-only | current | Counter for the total number of frames (all colors). If osEthServFlowCountStatus does not contain a hasAggregatePkts, then this counter is always equal to zero |
| 1.3.6.1.4.1.6926.2.10.30.1.12 | ColumnosEthServFlowCountGreenOcts | read-only | current | Counter for the number of bytes marked with Green conformance level. If osEthServFlowCountStatus does not contain a hasColoredOcts, then this counter is always… |
| 1.3.6.1.4.1.6926.2.10.30.1.13 | ColumnosEthServFlowCountGreenPkts | read-only | current | Counter for the number of frames marked with Green conformance leve. If osEthServFlowCountStatus does not contain a hasColoredOcts, then this counter is always… |
| 1.3.6.1.4.1.6926.2.10.30.1.14 | ColumnosEthServFlowCountYellowOcts | read-only | current | Counter for the number of bytes marked with Yellow conformance level. If osEthServFlowCountStatus does not contain a hasColoredOcts, then this counter is alway… |
| 1.3.6.1.4.1.6926.2.10.30.1.15 | ColumnosEthServFlowCountYellowPkts | read-only | current | Counter for the number of frames marked with Yellow conformance level. If osEthServFlowCountStatus does not contain a hasColoredOcts, then this counter is alwa… |
| 1.3.6.1.4.1.6926.2.10.30.1.16 | ColumnosEthServFlowCountRedOcts | read-only | current | Counter for the number of bytes marked with Red conformance level. If osEthServFlowCountStatus does not contain a hasColoredOcts, then this counter is always e… |
| 1.3.6.1.4.1.6926.2.10.30.1.17 | ColumnosEthServFlowCountRedPkts | read-only | current | Counter for the number of frames marked with Red conformance level. If osEthServFlowCountStatus does not contain a hasColoredOcts, then this counter is always … |
| 1.3.6.1.4.1.6926.2.10.31 | NodeosEthServTm | |||
| 1.3.6.1.4.1.6926.2.10.31.2 | TableosEthServTmCountTable | not-accessible | current | This table contains bandwith counters of services and flows. |
| 1.3.6.1.4.1.6926.2.10.31.2.1 | RowosEthServTmCountEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.31.2.1.2 | ColumnosEthServTmCountDir | not-accessible | current | The direction of banwidth rate limit. |
| 1.3.6.1.4.1.6926.2.10.31.2.1.3 | ColumnosEthServTmPort | not-accessible | current | s-port for upstream or s-port for downstream. |
| 1.3.6.1.4.1.6926.2.10.31.2.1.5 | ColumnosEthServTmCountStatus | read-only | current | Current status of the entry, describes a set of relevant counters. |
| 1.3.6.1.4.1.6926.2.10.31.2.1.7 | ColumnosEthServTmCountPassOcts | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.31.2.1.8 | ColumnosEthServTmCountPassPkts | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.31.2.1.9 | ColumnosEthServTmCountDropOcts | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.31.2.1.10 | ColumnosEthServTmCountDropPkts | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.32 | TableosEthServExtTable | not-accessible | current | Extensions of osEthServTable. |
| 1.3.6.1.4.1.6926.2.10.32.1 | RowosEthServExtEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.32.1.2 | ColumnosEthServLimitBWTF | read-write | current | Limit rate limit of FPGA tests per flow. If this paramater equals true(1), then all traffic, generationg by FPGA of test of a flow will pass the same rate limi… |
| 1.3.6.1.4.1.6926.2.10.32.1.3 | ColumnosEthServFullDownstreamLpbk | read-write | current | Full (egress and ingress) downstream loopback. CLI command is '[no ]full-downstream-loopback'. |
| 1.3.6.1.4.1.6926.2.10.32.1.4 | ColumnosEthServUpstrDeiRemark | read-write | current | Upstream Drop eligible indicator remarking. CLI command is '[no ]upstream-dei-remark'. |
| 1.3.6.1.4.1.6926.2.10.32.1.5 | ColumnosEthServEPortsBufPrfl | read-write | current | CLI command is '[no ]e-ports-buffer-prfl (<none|<1-7|>)'. |
| 1.3.6.1.4.1.6926.2.10.32.1.6 | ColumnosEthServEPortsPrioQuePrfl | read-write | current | CLI command is '[no ]e-ports-priority_queuing-prfl (<1-7>|)'. |
| 1.3.6.1.4.1.6926.2.10.32.1.14 | ColumnosEthServCMgmtVlan | read-write | current | Customer management vlan. CLI command is '[no ]c-management-vlan (<1-4095>|)'. |
| 1.3.6.1.4.1.6926.2.10.32.1.15 | ColumnosEthServOamMepSlmResponder | read-write | current | Allows to MEP of the service to be an SLM responder. CLI command is '[no ] oam slm-responder'. |
| 1.3.6.1.4.1.6926.2.10.32.1.16 | ColumnosEthServTmDirs | read-only | current | This object allows to select between osEthServCountTable and osEthServTmCountTable for a service. If osEthServTmDirs exists and the bit tmUpStreamIngress is se… |
| 1.3.6.1.4.1.6926.2.10.32.1.17 | ColumnosEthServMflgThreshold | read-create | current | The number of repeated re-learnings of the MAC per second, after which the port is isolated. A value of '0' means that LAN-based MFLG is disabled for this serv… |
| 1.3.6.1.4.1.6926.2.10.32.1.18 | ColumnosEthServRecoverPorts | read-write | current | When an agent receives this object with the value true(1) in SNMP SET operations, it immediately recovers all ports of all VIFs of EService that are isolated, … |
| 1.3.6.1.4.1.6926.2.10.34 | TableosEthServTunnelTable | not-accessible | current | GRE tunnels of EServices. |
| 1.3.6.1.4.1.6926.2.10.34.1 | RowosEthServTunnelEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.34.1.2 | ColumnosEthServTunnelName | not-accessible | current | GRE tunnel Identifier. |
| 1.3.6.1.4.1.6926.2.10.34.1.99 | ColumnosEthServTunnelAdminStatus | read-create | current | Allows to create new rows or delete old rows. On GET always returns nothing(2). |
| 1.3.6.1.4.1.6926.2.10.100 | NodeosEthConformance | |||
| 1.3.6.1.4.1.6926.2.10.100.1 | NodeosEthMIBCompliances | |||
| 1.3.6.1.4.1.6926.2.10.100.1.1 | ComplianceosEthMIBCompliance | current | The core compliance statement for all the implementations. | |
| 1.3.6.1.4.1.6926.2.10.100.1.2 | ComplianceosEthMIBDeprCompliance | deprecated | Deprecated groups. | |
| 1.3.6.1.4.1.6926.2.10.100.2 | NodeosEthMIBGroups | |||
| 1.3.6.1.4.1.6926.2.10.100.2.1 | GrouposEthMandatoryGroup | current | . | |
| 1.3.6.1.4.1.6926.2.10.100.2.2 | GrouposEthDeprecatedGroup | deprecated | . | |
| 1.3.6.1.4.1.6926.2.10.100.2.3 | GrouposEthNotificationsGroup | current | The notification which are required to be supported by implementations of this MIB. |