MIB Viewer

OS-ETH-SERV-PROTECTION-MIB

34 objects
Protection for MEF Ethernet Virtual Connections MIB.
Imported Objects
OS-COMMON-TC-MIBoaOptiSwitch OsCfmMepIdOrZero
OS-ETH-SERV-MIBosEthServId
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCMacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.6926.2.33IdentityosEthServProtectionProtection for MEF Ethernet Virtual Connections MIB.
1.3.6.1.4.1.6926.2.33.0NodeosEthServProtNotifications
1.3.6.1.4.1.6926.2.33.0.1NotificationosEthElpTrailSwitchcurrentELP switched the active trail
1.3.6.1.4.1.6926.2.33.1TableosEthServElpTablenot-accessiblecurrentEthernet Linear Protection (G.8031) per service configuration table.
1.3.6.1.4.1.6926.2.33.1.1RowosEthServElpEntrynot-accessiblecurrentContains an entry of the table.
1.3.6.1.4.1.6926.2.33.1.1.1ColumnosEthElpApsMacAddressread-writecurrentThe MAC Address that is used as destination in TX APS PDUs and also used to trap RX APS PDUs.
1.3.6.1.4.1.6926.2.33.1.1.2ColumnosEthElpTrackCcmread-writecurrentEnable tracking of CCM timeout events. Timeout on the specified MA (and optionally RMEP) assigned to the service will be considered as signal failure.
1.3.6.1.4.1.6926.2.33.1.1.3ColumnosEthElpRemoteMepIdWorkingread-writecurrentIndicates a remote MEP Id that send CCMs. A timeout event for that remote MEP will be considered an ELP signal failure on the WORKING trail
1.3.6.1.4.1.6926.2.33.1.1.4ColumnosEthElpRemoteMepIdProtectionread-writecurrentIndicates a remote MEP Id that send CCMs. A timeout event for that remote MEP will be considered an ELP signal failure on the PROTECTION trail
1.3.6.1.4.1.6926.2.33.1.1.5ColumnosEthElpHoldOffDelayread-writecurrentTime in milliseconds to hold-off switch over in case of a failure event.
1.3.6.1.4.1.6926.2.33.1.1.6ColumnosEthElpRevertDelayread-writecurrentFollowing a recovery from signal failure on the WORKING trail, time in milliseconds to wait until switching over to the WORKING trail. (-1) indicates Do-Not-Re…
1.3.6.1.4.1.6926.2.33.1.1.7ColumnosEthElpCommandread-writecurrentIssue a Command to mainpulate the G.8031 state machine. Note that command may be rejected if a higher priority condition is in effect. This is effectively a wr…
1.3.6.1.4.1.6926.2.33.1.1.20ColumnosEthElpActiveTrailread-onlycurrentCurrent active trail for the service.
1.3.6.1.4.1.6926.2.33.1.1.21ColumnosEthElpPendingCommandread-onlycurrentThe pending managment command within the G.8031 logic. Note that a pending command may be silently cleared by the G.8031 logic once a higher priority condition…
1.3.6.1.4.1.6926.2.33.1.1.22ColumnosEthElpApsRxCountread-onlycurrentThe total number of APS packets received with valid content.
1.3.6.1.4.1.6926.2.33.1.1.23ColumnosEthElpApsTxCountread-onlycurrentThe total number of APS packets transmitted
1.3.6.1.4.1.6926.2.33.1.1.24ColumnosEthElpFsmStateNameread-onlycurrentThe current state of the G.8031 Final-State-Machine. This value is a string with the name of the state.
1.3.6.1.4.1.6926.2.33.1.1.25ColumnosEthElpFarEndFsmStateNameread-onlycurrentThe far-end's last reported state of the G.8031 Final-State-Machine. This value is a string with the name of the state.
1.3.6.1.4.1.6926.2.33.1.1.26ColumnosEthElpTrackCcmStateWorkingread-onlycurrentThe CCM tracking state of the WORKING trail.
1.3.6.1.4.1.6926.2.33.1.1.27ColumnosEthElpTrackCcmStateProtectionread-onlycurrentThe CCM tracking state of the PROTECTION trail.
1.3.6.1.4.1.6926.2.33.1.1.28ColumnosEthElpTimeToRevertread-onlycurrentTime in seconds until ELP is going to revert from PROTECTION to WORKING.
1.3.6.1.4.1.6926.2.33.1.1.29ColumnosEthElpWorkingSignalStateread-onlycurrentThe signal state of the WORKING trail. Based on CCM tracking and port link state.
1.3.6.1.4.1.6926.2.33.1.1.30ColumnosEthElpProtectionSignalStateread-onlycurrentThe signal state of the PROTECTION trail. Based on CCM tracking and port link state.
1.3.6.1.4.1.6926.2.33.1.1.40ColumnosEthElpProtectionIndexNameread-onlycurrentService identifier of the row that holds the protection information for the service
1.3.6.1.4.1.6926.2.33.1.1.98ColumnosEthElpAdminStatusread-writecurrentCreate - create a protection row in osEthServTable in which proteection trail properties such as s-vlan and s-ports should be configured. delete - delete the p…
1.3.6.1.4.1.6926.2.33.100NodeosEthProtConformance
1.3.6.1.4.1.6926.2.33.100.1NodeosEthProtMIBCompliances
1.3.6.1.4.1.6926.2.33.100.1.1ComplianceosEthProtMIBCompliancecurrentThe core compliance statement for all the implementations.
1.3.6.1.4.1.6926.2.33.100.2NodeosEthProtMIBGroups
1.3.6.1.4.1.6926.2.33.100.2.1GrouposEthProtectionMandatoryGroupcurrent.
1.3.6.1.4.1.6926.2.33.100.2.2GrouposEthProtectionNotificationsGroupcurrent.
Type Definitions
NameSyntaxStatusDescription
CcmTrackStateINTEGER { disabled (1), up (2), down (3) }currentState of ccm-tracking for a trail. disabled - no CCM tracking for the trail up - CCMs of the ma/mep associated with the trail arrive down - A CCM timeout event detected for the ma/mep associated with the trail. The time…
ElpCommandINTEGER { unknown (1), nothing (2), clear (3), lockout (4), forcedSwitch (5), manualSwitchWorking (6), manualSwitchProtection (7), exercise (8), freeze (9), clearFreeze (10) }currentA management that can be injected as an input into the G.8031 logic and may cause state change and switch over of the active trail.
TrailSignalStateINTEGER { unknown (1), normal (2), fail (3), degrade (4) }currentThe state of a trail based on port link down events or CCM timeout events. A state other than 'normal' may cause active trail switch by the G.8031 logic.