OS-PROV-RFC2544-MIB
217 objects
RFC 2544 Benchmarking Methodology for Network Interconnect Devices.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| OS-COMMON-TC-MIB | EntityName EntityNameOrNone EntryValidator oaOptiSwitch PortIndexOrNone PortList ProfileStatus RespType ServFlowId |
| OS-ETH-SERV-MIB | osEthServId |
| SNMPv2-CONF | -- RFC2851 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926.2.11 | IdentityosProvRfc2544 | RFC 2544 Benchmarking Methodology for Network Interconnect Devices. | ||
| 1.3.6.1.4.1.6926.2.11.0 | NodeosProvRfc2544Notifications | |||
| 1.3.6.1.4.1.6926.2.11.1 | NodeosProvRfc2544Gen | |||
| 1.3.6.1.4.1.6926.2.11.1.1 | NodeosProvRfc2544Capabilities | |||
| 1.3.6.1.4.1.6926.2.11.1.1.1 | ScalarosProvRfc2544ProtocolSupported | read-only | current | Indicates protocols supported by this agent: l2Supported(0) means that l2Protocol of ITU-T Y.1721 is supported; l3Supported(1) means that l2Protocol of RFC792 … |
| 1.3.6.1.4.1.6926.2.11.1.1.2 | ScalarosProvRfc2544TestTypesSupported | read-only | current | Indicates types of tests, that supported by this agent. |
| 1.3.6.1.4.1.6926.2.11.1.1.3 | ScalarosRfc2544IpAddrTypesSupported | read-only | current | Indicates types of supported Internet address In terms of RFC 3291 (INET-ADDRESS-MIB). |
| 1.3.6.1.4.1.6926.2.11.1.1.4 | ScalarosProvRfc2544MinRate | read-only | current | Minimum positive value for osProvRfc2544Rate, supported by the aggent. |
| 1.3.6.1.4.1.6926.2.11.1.1.5 | ScalarosProvRfc2544MaxRate | read-only | current | Minimum value for osProvRfc2544Rate, supported by the aggent. |
| 1.3.6.1.4.1.6926.2.11.1.1.6 | ScalarosProvRfc2544MaxNumOfLengths | read-only | current | Maximum number of rows in osProvRfc2544LngthsSetTable (minimum number is equal to '1'). |
| 1.3.6.1.4.1.6926.2.11.1.2 | ScalarosProvRfc2544TholdReason | accessible-for-notify | current | . |
| 1.3.6.1.4.1.6926.2.11.4 | TableosProvRfc2544PrflTable | not-accessible | current | This table contains RFC2544 Profiles. |
| 1.3.6.1.4.1.6926.2.11.4.1 | RowosProvRfc2544PrflEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.11.4.1.2 | ColumnosProvRfc2544PrflId | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.11.4.1.4 | ColumnosProvRfc2544PrflTestType | read-create | current | . |
| 1.3.6.1.4.1.6926.2.11.4.1.5 | ColumnosProvRfc2544PrflProtocol | read-create | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.11.4.1.16 | ColumnosProvRfc2544PrflBurstNumber | read-create | current | Number of bursts. The value 0 means forever. |
| 1.3.6.1.4.1.6926.2.11.4.1.17 | ColumnosProvRfc2544PrflBurstInterval | read-create | current | Time interval between bursts, in seconds. |
| 1.3.6.1.4.1.6926.2.11.4.1.21 | ColumnosProvRfc2544PrflProbeNumber | read-create | current | Number of packets (probes) in a burst. If osProvRfc2544Duration is not equal to 0, this object does not make sense and is not used. Objects osProvRfc2544ProbeN… |
| 1.3.6.1.4.1.6926.2.11.4.1.22 | ColumnosProvRfc2544PrflDuration | read-create | current | Duration of one burst. The value 0 means, that osProvRfc2544ProbeNumber will be used. Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSA… |
| 1.3.6.1.4.1.6926.2.11.4.1.24 | ColumnosProvRfc2544PrflProbeInterval | read-create | current | The interval between transmitted frames in a burst. This object is not used if osProvRfc2544Rate is not equal to 0. Objects osProvRfc2544ProbeInterval and osPr… |
| 1.3.6.1.4.1.6926.2.11.4.1.25 | ColumnosProvRfc2544PrflRate | read-create | current | The rate of transmition frames in bursts. The value 0 means, that osProvRfc2544ProbeInterval will be used. Objects osProvRfc2544ProbeInterval and osProvRfc2544… |
| 1.3.6.1.4.1.6926.2.11.4.1.26 | ColumnosProvRfc2544PrflProbeTimeout | read-create | current | Specifies the duration to wait for a responce (milliseconds). |
| 1.3.6.1.4.1.6926.2.11.4.1.28 | ColumnosProvRfc2544PrflAllwdPcktLoss | read-create | current | Maximum loss ratio allowed in the throughput test. |
| 1.3.6.1.4.1.6926.2.11.4.1.29 | ColumnosProvRfc2544PrflMinStep | read-create | current | Minimum rate step in the throughput test. |
| 1.3.6.1.4.1.6926.2.11.4.1.32 | ColumnosProvRfc2544PrflPacketLength | read-create | current | Packet length, including VLAN ID and CRC. For throughput(2) and latency(3) returns first value from osProvRfc2544LengthValue as a reply on GET operation and re… |
| 1.3.6.1.4.1.6926.2.11.4.1.35 | ColumnosProvRfc2544PrflDataFill | read-create | current | Determine how to fill the data portion of a probe packet, while number of characters is a multiple of 8. |
| 1.3.6.1.4.1.6926.2.11.4.1.37 | ColumnosProvRfc2544PrflTtl | read-create | current | Time To Live. |
| 1.3.6.1.4.1.6926.2.11.4.1.50 | ColumnosProvRfc2544PrflMaxRows | read-create | current | The maximum number of entries allowed in the osProvRfc2544HistTable. An implementation of this MIB will remove the oldest entry in the osProvRfc2544HistTable t… |
| 1.3.6.1.4.1.6926.2.11.4.1.55 | ColumnosProvRfc2544PrflTrapsGeneration | read-create | current | The value of this object determines when and if to generate a notification for this entry: burstComplete(0)- Generate a osProvRfc2544BurstComplete notification… |
| 1.3.6.1.4.1.6926.2.11.4.1.60 | ColumnosProvRfc2544PrflFdRise | read-create | current | Frame delay (Average of Round Trip Time) Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.11.4.1.61 | ColumnosProvRfc2544PrflFdFall | read-create | current | Frame delay (Average of Round Trip Time) Falling threshold |
| 1.3.6.1.4.1.6926.2.11.4.1.62 | ColumnosProvRfc2544PrflJittRise | read-create | current | Jitter Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.11.4.1.63 | ColumnosProvRfc2544PrflJittFall | read-create | current | Jitter Falling threshold. |
| 1.3.6.1.4.1.6926.2.11.4.1.64 | ColumnosProvRfc2544PrflPcktLossRise | read-create | current | The packet loss Rising threshold. |
| 1.3.6.1.4.1.6926.2.11.4.1.65 | ColumnosProvRfc2544PrflPcktLossFall | read-create | current | The packet loss Falling threshold. |
| 1.3.6.1.4.1.6926.2.11.4.1.97 | ColumnosProvRfc2544PrflLastError | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.4.1.98 | ColumnosProvRfc2544PrflAdminStatus | read-create | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.11.4.1.99 | ColumnosProvRfc2544PrflOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.5 | TableosProvRfc2544LngthsSetTable | not-accessible | current | This table contains RFC2544 Profiles. |
| 1.3.6.1.4.1.6926.2.11.5.1 | RowosProvRfc2544LngthsSetEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.11.5.1.4 | ColumnosProvRfc2544LngthsSetValue | not-accessible | current | Packet length including VLAN-id and CRC. |
| 1.3.6.1.4.1.6926.2.11.5.1.98 | ColumnosProvRfc2544LngthsSetAdmStatus | read-create | current | Allows to create new rows or delete old rows. |
| 1.3.6.1.4.1.6926.2.11.7 | TableosProvRfc2544CfgTable | not-accessible | current | Rfc2544 service configuration table. |
| 1.3.6.1.4.1.6926.2.11.7.1 | RowosProvRfc2544CfgEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.11.7.1.3 | ColumnosProvRfc2544CfgFlowId | not-accessible | current | The value 0 means, that this entry corresponds to the service, not to to any flow. If this object is not equal to 0, it means CoS of a flow. |
| 1.3.6.1.4.1.6926.2.11.7.1.4 | ColumnosProvRfc2544CfgPrfl | read-create | current | Refers to an entry in osProvRfc2544PrflTable. If osProvRfc2544CfgPrfl is empty, then default values are used. |
| 1.3.6.1.4.1.6926.2.11.7.1.6 | ColumnosProvRfc2544CfgDstMac | read-create | current | If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544DstMac must be defined with a host physical address to be used as a remote host for p… |
| 1.3.6.1.4.1.6926.2.11.7.1.7 | ColumnosProvRfc2544CfgSrcMac | read-create | current | If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544CfgSrcMac must be defined. If configured, override osProvRfc2544CfgSrcMacRange value.… |
| 1.3.6.1.4.1.6926.2.11.7.1.8 | ColumnosProvRfc2544CfgSrcMacRange | read-write | current | Defines customer source-mac range, i.e. multi source-mac addresses based on machine source-mac changing the thrid byte corresponding to the configured range. T… |
| 1.3.6.1.4.1.6926.2.11.7.1.10 | ColumnosProvRfc2544CfgDstIpType | read-create | current | Specifies the type of host address to be used at a remote host for performing an operation. |
| 1.3.6.1.4.1.6926.2.11.7.1.11 | ColumnosProvRfc2544CfgDstIpAddr | read-create | current | If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then he test cannot be enabled if osProvRfc2544DstIpAddr is not equal to 0.0.0.0. If osProvRfc2544PrflP… |
| 1.3.6.1.4.1.6926.2.11.7.1.14 | ColumnosProvRfc2544CfgTxPort | read-create | current | If osProvRfc2544PrflProtocol is equal to l2Protocol(2), then osProvRfc2544TxPort may be defined and used when osProvRfc2544CfgDstMac is absent in learning tabl… |
| 1.3.6.1.4.1.6926.2.11.7.1.15 | ColumnosProvRfc2544CfgTos | read-create | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type… |
| 1.3.6.1.4.1.6926.2.11.7.1.20 | ColumnosProvRfc2544CfgEnabled | read-create | current | To start/stop Performance test. |
| 1.3.6.1.4.1.6926.2.11.7.1.21 | ColumnosProvRfc2544CfgClear | read-create | current | This object when written clears the osProvRfc2544HistTable history tables - all rows are deleted. When read the value always returns 'false'. Writing this obje… |
| 1.3.6.1.4.1.6926.2.11.10 | TableosProvRfc2544RsltTable | not-accessible | current | This table contain the last completed burst results. Exception is the object osProvRfc2544RsltTestRunState - it indicates a current state of the test. |
| 1.3.6.1.4.1.6926.2.11.10.1 | RowosProvRfc2544RsltEntry | not-accessible | current | Contains an entry of the osProvRfc2544RsltTable table. |
| 1.3.6.1.4.1.6926.2.11.10.1.4 | ColumnosProvRfc2544RsltStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.11.10.1.5 | ColumnosProvRfc2544RsltTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.10.1.6 | ColumnosProvRfc2544RsltRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.10.1.7 | ColumnosProvRfc2544RsltTestRunState | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.10.1.8 | ColumnosProvRfc2544RsltProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.11.10.1.10 | ColumnosProvRfc2544RsltDstMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.11.10.1.11 | ColumnosProvRfc2544RsltSrcMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.11.10.1.12 | ColumnosProvRfc2544RsltIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType. |
| 1.3.6.1.4.1.6926.2.11.10.1.13 | ColumnosProvRfc2544RsltIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr. |
| 1.3.6.1.4.1.6926.2.11.10.1.16 | ColumnosProvRfc2544RsltTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.10.1.21 | ColumnosProvRfc2544RsltTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.11.10.1.22 | ColumnosProvRfc2544RsltReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.11.10.1.23 | ColumnosProvRfc2544RsltRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.10.1.24 | ColumnosProvRfc2544RsltRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.10.1.25 | ColumnosProvRfc2544RsltRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.10.1.26 | ColumnosProvRfc2544RsltRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.10.1.30 | ColumnosProvRfc2544RsltJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.10.1.32 | ColumnosProvRfc2544RsltJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.10.1.33 | ColumnosProvRfc2544RsltJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.10.1.34 | ColumnosProvRfc2544RsltJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.10.1.35 | ColumnosProvRfc2544RsltDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.10.1.36 | ColumnosProvRfc2544RsltDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.10.1.37 | ColumnosProvRfc2544RsltDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.10.1.38 | ColumnosProvRfc2544RsltDsJittSum2 | read-only | current | This object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.10.1.40 | ColumnosProvRfc2544RsltPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.11.10.1.46 | ColumnosProvRfc2544RsltProbeInterval | read-only | current | The interval between packets. Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc2544Rate has b… |
| 1.3.6.1.4.1.6926.2.11.10.1.47 | ColumnosProvRfc2544RsltRate | read-only | current | The rate of transmition frames in bursts. Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc25… |
| 1.3.6.1.4.1.6926.2.11.10.1.48 | ColumnosProvRfc2544RsltPacketLength | read-only | current | This object is equal to corresponding osProvRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.11.11 | TableosProvRfc2544HistTable | not-accessible | current | This table contain at most last osProvRfc2544MaxRows samples, each of them reflects results of comleted burst. |
| 1.3.6.1.4.1.6926.2.11.11.1 | RowosProvRfc2544HistEntry | not-accessible | current | Contains an entry of the osProvRfc2544HistTable table. |
| 1.3.6.1.4.1.6926.2.11.11.1.3 | ColumnosProvRfc2544HistIndex | not-accessible | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same osProvRfc2544CfgEntry. This index star… |
| 1.3.6.1.4.1.6926.2.11.11.1.4 | ColumnosProvRfc2544HistStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.11.11.1.5 | ColumnosProvRfc2544HistTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.11.1.6 | ColumnosProvRfc2544HistRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.11.1.8 | ColumnosProvRfc2544HistProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.11.11.1.10 | ColumnosProvRfc2544HistDstMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.11.11.1.11 | ColumnosProvRfc2544HistSrcMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.11.11.1.12 | ColumnosProvRfc2544HistIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType. |
| 1.3.6.1.4.1.6926.2.11.11.1.13 | ColumnosProvRfc2544HistIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr. |
| 1.3.6.1.4.1.6926.2.11.11.1.16 | ColumnosProvRfc2544HistTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.11.1.21 | ColumnosProvRfc2544HistTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.11.11.1.22 | ColumnosProvRfc2544HistReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.11.11.1.23 | ColumnosProvRfc2544HistRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.11.1.24 | ColumnosProvRfc2544HistRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.11.1.25 | ColumnosProvRfc2544HistRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.11.1.26 | ColumnosProvRfc2544HistRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.11.1.30 | ColumnosProvRfc2544HistJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.11.1.32 | ColumnosProvRfc2544HistJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.11.1.33 | ColumnosProvRfc2544HistJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.11.1.34 | ColumnosProvRfc2544HistJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.11.1.35 | ColumnosProvRfc2544HistDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.11.1.36 | ColumnosProvRfc2544HistDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.11.1.37 | ColumnosProvRfc2544HistDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.11.1.38 | ColumnosProvRfc2544HistDsJittSum2 | read-only | current | This object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.11.1.40 | ColumnosProvRfc2544HistPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.11.11.1.46 | ColumnosProvRfc2544HistProbeInterval | read-only | current | The interval between packets. Objects osProvRfc2544HistProbeInterval and osProvRfc2544HistRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc2544Rate has b… |
| 1.3.6.1.4.1.6926.2.11.11.1.47 | ColumnosProvRfc2544HistRate | read-only | current | The rate of transmition frames in bursts. Objects osProvRfc2544HistProbeInterval and osProvRfc2544HistRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc25… |
| 1.3.6.1.4.1.6926.2.11.11.1.48 | ColumnosProvRfc2544HistPacketLength | read-only | current | This object is equal to corresponding osProvRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.11.12 | TableosProvRfc2544LengthTable | not-accessible | current | Rfc2544 service configuration table. |
| 1.3.6.1.4.1.6926.2.11.12.1 | RowosProvRfc2544LengthEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.11.12.1.3 | ColumnosProvRfc2544LengthValue | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.11.12.1.4 | ColumnosProvRfc2544LengthStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.11.12.1.5 | ColumnosProvRfc2544LengthTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.12.1.7 | ColumnosProvRfc2544LengthTestRunState | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.12.1.8 | ColumnosProvRfc2544LengthProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.11.12.1.10 | ColumnosProvRfc2544LengthDstMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.11.12.1.11 | ColumnosProvRfc2544LengthSrcMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.11.12.1.12 | ColumnosProvRfc2544LengthIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType. |
| 1.3.6.1.4.1.6926.2.11.12.1.13 | ColumnosProvRfc2544LengthIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr. |
| 1.3.6.1.4.1.6926.2.11.12.1.16 | ColumnosProvRfc2544LengthTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.12.1.21 | ColumnosProvRfc2544LengthTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.11.12.1.22 | ColumnosProvRfc2544LengthReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.11.12.1.23 | ColumnosProvRfc2544LengthRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.12.1.24 | ColumnosProvRfc2544LengthRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.12.1.25 | ColumnosProvRfc2544LengthRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.12.1.26 | ColumnosProvRfc2544LengthRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.12.1.30 | ColumnosProvRfc2544LengthJittMin | read-only | current | The minimum value of all source-to-destinameion jitter values. |
| 1.3.6.1.4.1.6926.2.11.12.1.32 | ColumnosProvRfc2544LengthJittMax | read-only | current | The mahimum value of all source-to-destinameion jitter values. |
| 1.3.6.1.4.1.6926.2.11.12.1.33 | ColumnosProvRfc2544LengthJittAverage | read-only | current | The average value of all source-to-destinameion jitter values. |
| 1.3.6.1.4.1.6926.2.11.12.1.34 | ColumnosProvRfc2544LengthJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destinameion jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.12.1.35 | ColumnosProvRfc2544LengthDsJittMin | read-only | current | The minimum value of all destinameion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.12.1.36 | ColumnosProvRfc2544LengthDsJittMax | read-only | current | The mahimum value of all destinameion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.12.1.37 | ColumnosProvRfc2544LengthDsJittAverage | read-only | current | The average value of all destinameion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.12.1.38 | ColumnosProvRfc2544LengthDsJittSum2 | read-only | current | This object contains the sum of the squares for all destinameion-to-source jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.12.1.40 | ColumnosProvRfc2544LengthPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.11.12.1.46 | ColumnosProvRfc2544LengthProbeInterval | read-only | current | The interval between packets. Objects osProvRfc2544LengthProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc2544Rate has… |
| 1.3.6.1.4.1.6926.2.11.12.1.47 | ColumnosProvRfc2544LengthRate | read-only | current | The rate of transmition frames in bursts. Objects osProvRfc2544RsltProbeInterval and osProvRfc2544RsltRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc25… |
| 1.3.6.1.4.1.6926.2.11.13 | TableosProvRfc2544RsltAccumTable | not-accessible | current | This table contain the last completed session accumulated bursts results. |
| 1.3.6.1.4.1.6926.2.11.13.1 | RowosProvRfc2544RsltAccumEntry | not-accessible | current | Contains an entry of the osProvRfc2544RsltAccumTable table. |
| 1.3.6.1.4.1.6926.2.11.13.1.4 | ColumnosProvRfc2544RsltAccumStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.11.13.1.5 | ColumnosProvRfc2544RsltAccumBurstsNumber | read-only | current | Corresponding osRfc2544HistoryIndex. |
| 1.3.6.1.4.1.6926.2.11.13.1.6 | ColumnosProvRfc2544RsltAccumTotalDuration | read-only | current | Corresponding osRfc2544HistoryIndex. |
| 1.3.6.1.4.1.6926.2.11.13.1.7 | ColumnosProvRfc2544RsltAccumTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.13.1.8 | ColumnosProvRfc2544RsltAccumRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.13.1.9 | ColumnosProvRfc2544RsltAccumTestRunState | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.13.1.10 | ColumnosProvRfc2544RsltAccumProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.11.13.1.11 | ColumnosProvRfc2544RsltAccumDstMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.11.13.1.12 | ColumnosProvRfc2544RsltAccumSrcMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.11.13.1.13 | ColumnosProvRfc2544RsltAccumIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType. |
| 1.3.6.1.4.1.6926.2.11.13.1.14 | ColumnosProvRfc2544RsltAccumIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr. |
| 1.3.6.1.4.1.6926.2.11.13.1.16 | ColumnosProvRfc2544RsltAccumTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.13.1.21 | ColumnosProvRfc2544RsltAccumTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.11.13.1.22 | ColumnosProvRfc2544RsltAccumReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.11.13.1.23 | ColumnosProvRfc2544RsltAccumRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.13.1.24 | ColumnosProvRfc2544RsltAccumRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.13.1.25 | ColumnosProvRfc2544RsltAccumRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.13.1.26 | ColumnosProvRfc2544RsltAccumRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.13.1.30 | ColumnosProvRfc2544RsltAccumJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.13.1.32 | ColumnosProvRfc2544RsltAccumJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.13.1.33 | ColumnosProvRfc2544RsltAccumJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.13.1.34 | ColumnosProvRfc2544RsltAccumJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.13.1.35 | ColumnosProvRfc2544RsltAccumDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.13.1.36 | ColumnosProvRfc2544RsltAccumDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.13.1.37 | ColumnosProvRfc2544RsltAccumDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.13.1.38 | ColumnosProvRfc2544RsltAccumDsJittSum2 | read-only | current | This object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.13.1.40 | ColumnosProvRfc2544RsltAccumPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.11.13.1.46 | ColumnosProvRfc2544RsltAccumProbeInterval | read-only | current | The interval between packets. Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc2544… |
| 1.3.6.1.4.1.6926.2.11.13.1.47 | ColumnosProvRfc2544RsltAccumRate | read-only | current | The rate of transmition frames in bursts. Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND TO EACH OTHER. If o… |
| 1.3.6.1.4.1.6926.2.11.13.1.48 | ColumnosProvRfc2544RsltAccumPacketLength | read-only | current | This object is equal to corresponding osProvRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.11.14 | TableosProvRfc2544HistAccumTable | not-accessible | current | This table contain at most last osProvRfc2544MaxRows samples, each of them reflects results of comleted burst. |
| 1.3.6.1.4.1.6926.2.11.14.1 | RowosProvRfc2544HistAccumEntry | not-accessible | current | Contains an entry of the osProvRfc2544HistAccumTable table. |
| 1.3.6.1.4.1.6926.2.11.14.1.3 | ColumnosProvRfc2544HistAccumIndex | not-accessible | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same osProvRfc2544CfgEntry. This index star… |
| 1.3.6.1.4.1.6926.2.11.14.1.4 | ColumnosProvRfc2544HistAccumStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.11.14.1.5 | ColumnosProvRfc2544HistAccumBurstsNumber | read-only | current | Corresponding osRfc2544HistoryIndex. |
| 1.3.6.1.4.1.6926.2.11.14.1.6 | ColumnosProvRfc2544HistAccumTotalDuration | read-only | current | Corresponding osRfc2544HistoryIndex. |
| 1.3.6.1.4.1.6926.2.11.14.1.7 | ColumnosProvRfc2544HistAccumTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.14.1.8 | ColumnosProvRfc2544HistAccumRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.14.1.9 | ColumnosProvRfc2544HistAccumProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.11.14.1.10 | ColumnosProvRfc2544HistAccumDstMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.11.14.1.11 | ColumnosProvRfc2544HistAccumSrcMac | read-only | current | For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.11.14.1.12 | ColumnosProvRfc2544HistAccumIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType. |
| 1.3.6.1.4.1.6926.2.11.14.1.13 | ColumnosProvRfc2544HistAccumIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr. |
| 1.3.6.1.4.1.6926.2.11.14.1.16 | ColumnosProvRfc2544HistAccumTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.11.14.1.21 | ColumnosProvRfc2544HistAccumTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.11.14.1.22 | ColumnosProvRfc2544HistAccumReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.11.14.1.23 | ColumnosProvRfc2544HistAccumRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.14.1.24 | ColumnosProvRfc2544HistAccumRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.14.1.25 | ColumnosProvRfc2544HistAccumRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.11.14.1.26 | ColumnosProvRfc2544HistAccumRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.14.1.30 | ColumnosProvRfc2544HistAccumJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.14.1.32 | ColumnosProvRfc2544HistAccumJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.14.1.33 | ColumnosProvRfc2544HistAccumJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.11.14.1.34 | ColumnosProvRfc2544HistAccumJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.14.1.35 | ColumnosProvRfc2544HistAccumDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.14.1.36 | ColumnosProvRfc2544HistAccumDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.14.1.37 | ColumnosProvRfc2544HistAccumDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.11.14.1.38 | ColumnosProvRfc2544HistAccumDsJittSum2 | read-only | current | This object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.11.14.1.40 | ColumnosProvRfc2544HistAccumPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.11.14.1.46 | ColumnosProvRfc2544HistAccumProbeInterval | read-only | current | The interval between packets. Objects osProvRfc2544HistAccumProbeInterval and osProvRfc2544HistAccumRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc2544… |
| 1.3.6.1.4.1.6926.2.11.14.1.47 | ColumnosProvRfc2544HistAccumRate | read-only | current | The rate of transmition frames in bursts. Objects osProvRfc2544HistAccumProbeInterval and osProvRfc2544HistAccumRate MUST ALWAYS CORRESPOND TO EACH OTHER. If o… |
| 1.3.6.1.4.1.6926.2.11.14.1.48 | ColumnosProvRfc2544HistAccumPacketLength | read-only | current | This object is equal to corresponding osProvRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.11.100 | NodeosProvRfc2544Conformance | |||
| 1.3.6.1.4.1.6926.2.11.100.1 | NodeosProvRfc2544MIBCompliances | |||
| 1.3.6.1.4.1.6926.2.11.100.1.1 | ComplianceosProvRfc2544MIBCompliance | current | The core compliance statement for all the implementations. | |
| 1.3.6.1.4.1.6926.2.11.100.2 | NodeosProvRfc2544MIBGroups | |||
| 1.3.6.1.4.1.6926.2.11.100.2.1 | GrouposProvRfc2544MandatoryGroup | current | . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TestProtocol | INTEGER { unknown (1), l2Protocol (2), l3Protocol (5) } | current | Protocol of a test. In Legacy OS these values mean: l2Protocol - dmmITUtY1731 (2), l3Protocol - icmpEcho (5) In OSA-V* these values mean: l2Protocol - LBM and selectively DMM l3Protocol - icmpEcho |
| TestRunState | INTEGER { notRunning (1), running (2), waitInQueue (3), readyForRun (4), idle (5) } | current | Indicates the running state of the Test: notRunning (1) - Test is not active, running (2) - Test is running, waitInQueue (3) - Test is waiting for hardware resources, readyForRun (4) - Test have received hardware resour… |
| TestType | INTEGER { unknown (1), throughput (2), latency (3), frameLossRate(4), basic (5) } | current | Indicates the type of the test: - throughput(2): The device sends a specific number of frames at a specific rate and then count the replies. The frame loss ratios calculated. If this frame loss ration is geater than osP… |