MIB Viewer

OS-PROV-Y1564-MIB

121 objects
Y1564 for EServices.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType
OS-COMMON-TC-MIBEntityName EntityNameOrNone EntryValidator oaOptiSwitch PortIndexOrNone PortList ProfileStatus ServFlowId
OS-ETH-SERV-MIB-- RFC2851 osEthServId
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString MacAddress TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.6926.2.4IdentityosProvY1564Y1564 for EServices.
1.3.6.1.4.1.6926.2.4.0NodeosProvY1564Notifications
1.3.6.1.4.1.6926.2.4.0.1NotificationosProvY1564TestCompleteAlarmcurrentGenerated when a test completes and bit burstComplete is set in osY1564TrapsGeneration.
1.3.6.1.4.1.6926.2.4.1NodeosProvY1564Gen
1.3.6.1.4.1.6926.2.4.1.1NodeosProvY1564Capabilities
1.3.6.1.4.1.6926.2.4.1.1.1ScalarosProvY1564ProtocolSupportedread-onlycurrentIndicates protocols supported by this agent: l2Supported(0) means that l2Protocol of ITU-T Y.1721 is supported; l3Supported(1) means that l2Protocol of RFC792 …
1.3.6.1.4.1.6926.2.4.1.1.3ScalarosY1564IpAddrTypesSupportedread-onlycurrentIndicates types of supported Internet address In terms of RFC 3291 (INET-ADDRESS-MIB).
1.3.6.1.4.1.6926.2.4.1.1.4ScalarosProvY1564MinRateread-onlycurrentMinimum positive value for osProvY1564Rate, supported by the aggent.
1.3.6.1.4.1.6926.2.4.1.1.5ScalarosProvY1564MaxRateread-onlycurrentMinimum value for osProvY1564Rate, supported by the aggent.
1.3.6.1.4.1.6926.2.4.4TableosProvY1564PrflTablenot-accessiblecurrentThis table contains Y1564 Profiles.
1.3.6.1.4.1.6926.2.4.4.1RowosProvY1564PrflEntrynot-accessiblecurrentContains an entry of the table.
1.3.6.1.4.1.6926.2.4.4.1.2ColumnosProvY1564PrflIdnot-accessiblecurrent.
1.3.6.1.4.1.6926.2.4.4.1.5ColumnosProvY1564PrflProtocolread-createcurrentProtocol of a test.
1.3.6.1.4.1.6926.2.4.4.1.6ColumnosProvY1564PrflDurationread-createcurrentDuration of one test.
1.3.6.1.4.1.6926.2.4.4.1.18ColumnosProvY1564PrflRateCIRread-createcurrentThe rate CIR.
1.3.6.1.4.1.6926.2.4.4.1.19ColumnosProvY1564PrflRateEIRread-createcurrentThe rate EIR.
1.3.6.1.4.1.6926.2.4.4.1.20ColumnosProvY1564PrflPerformanceMemberread-createcurrentIs the profile test is a member at the performance test
1.3.6.1.4.1.6926.2.4.4.1.26ColumnosProvY1564PrflTimeoutread-createcurrentSpecifies the duration to wait for a responce (milliseconds).
1.3.6.1.4.1.6926.2.4.4.1.28ColumnosProvY1564PrflAllwdPcktLossread-createcurrentMaximum loss ratio allowed in the throughput test.
1.3.6.1.4.1.6926.2.4.4.1.32ColumnosProvY1564PrflPacketLengthread-createcurrentPacket length, including VLAN ID and CRC.
1.3.6.1.4.1.6926.2.4.4.1.35ColumnosProvY1564PrflDataFillread-createcurrentDetermine how to fill the data portion of a probe packet, while number of characters is a multiple of 8.
1.3.6.1.4.1.6926.2.4.4.1.37ColumnosProvY1564PrflTtlread-createcurrentTime To Live.
1.3.6.1.4.1.6926.2.4.4.1.50ColumnosProvY1564PrflMaxRowsread-createcurrentThe maximum number of entries allowed in the osProvY1564HistTable. An implementation of this MIB will remove the oldest entry in the osProvY1564HistTable to al…
1.3.6.1.4.1.6926.2.4.4.1.55ColumnosProvY1564PrflTrapsGenerationread-createcurrentThe value of this object determines when and if to generate a notification for this entry.
1.3.6.1.4.1.6926.2.4.4.1.97ColumnosProvY1564PrflLastErrorread-onlycurrent.
1.3.6.1.4.1.6926.2.4.4.1.98ColumnosProvY1564PrflAdminStatusread-createcurrentAllows to create new rows or delete old rows.
1.3.6.1.4.1.6926.2.4.4.1.99ColumnosProvY1564PrflOperStatusread-onlycurrent.
1.3.6.1.4.1.6926.2.4.6TableosProvY1564ServTablenot-accessiblecurrentY1564 service configuration table.
1.3.6.1.4.1.6926.2.4.6.1RowosProvY1564ServEntrynot-accessiblecurrentContains an entry of the table.
1.3.6.1.4.1.6926.2.4.6.1.20ColumnosProvY1564ServPerfEnabledread-createcurrentTo start/stop Performance test.
1.3.6.1.4.1.6926.2.4.6.1.25ColumnosProvY1564ServPerfDurationread-createcurrentConfigure the performance test duration (1 - 900 seconds).
1.3.6.1.4.1.6926.2.4.7TableosProvY1564FlowTablenot-accessiblecurrentY1564 flow configuration table.
1.3.6.1.4.1.6926.2.4.7.1RowosProvY1564FlowEntrynot-accessiblecurrentContains an entry of the table.
1.3.6.1.4.1.6926.2.4.7.1.2ColumnosEthServY1564FlowIdnot-accessiblecurrentThe ServFlowId (ID) of the flow.
1.3.6.1.4.1.6926.2.4.7.1.4ColumnosProvY1564FlowPrflread-createcurrentRefers to an entry in osProvY1564PrflTable. If osProvY1564FlowPrfl is empty, then default values are used.
1.3.6.1.4.1.6926.2.4.7.1.6ColumnosProvY1564FlowDstMacread-createcurrentIf osProvY1564PrflProtocol is equal to l2Protocol(2) or to lbmITUtY1731(3), then osProvY1564DstMac must be defined with a host physical address to be used as a…
1.3.6.1.4.1.6926.2.4.7.1.7ColumnosProvY1564FlowSrcMacread-createcurrentIf osProvY1564PrflProtocol is equal to l2Protocol(2) or to lbmITUtY1731(3), then osProvY1564FlowSrcMac must be defined. If configured, override osProvY1564Flow…
1.3.6.1.4.1.6926.2.4.7.1.8ColumnosProvY1564FlowSrcMacRangeread-writecurrentDefines customer source-mac range, i.e. multi source-mac addresses based on machine source-mac changing the thrid byte corresponding to the configured range. T…
1.3.6.1.4.1.6926.2.4.7.1.10ColumnosProvY1564FlowDstIpTyperead-createcurrentSpecifies the type of host address to be used at a remote host for performing an operation.
1.3.6.1.4.1.6926.2.4.7.1.11ColumnosProvY1564FlowDstIpAddrread-createcurrentIf osProvY1564PrflProtocol is equal to l2Protocol(2) or to lbmITUtY1731(3), then he test cannot be enabled if osProvY1564DstIpAddr is not equal to 0.0.0.0. If …
1.3.6.1.4.1.6926.2.4.7.1.14ColumnosProvY1564FlowTxPortread-createcurrentIf osProvY1564PrflProtocol is equal to l2Protocol(2) or to lbmITUtY1731(3), then osProvY1564TxPort may be defined and used when osProvY1564FlowDstMac is absent…
1.3.6.1.4.1.6926.2.4.7.1.15ColumnosProvY1564FlowTosread-createcurrentSpecifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type…
1.3.6.1.4.1.6926.2.4.7.1.20ColumnosProvY1564FlowConfEnabledread-createcurrentTo start/stop configuration test.
1.3.6.1.4.1.6926.2.4.7.1.21ColumnosProvY1564FlowClearread-createcurrentThis object when written clears the osProvY1564HistTable history tables - all rows are deleted. When read the value always returns 'false'. Writing this object…
1.3.6.1.4.1.6926.2.4.10TableosProvY1564RsltTablenot-accessiblecurrentThis table contain the last completed burst results. Exception is the object osProvY1564RsltTestRunState - it indicates a current state of the test.
1.3.6.1.4.1.6926.2.4.10.1RowosProvY1564RsltEntrynot-accessiblecurrentContains an entry of the osProvY1564RsltTable table.
1.3.6.1.4.1.6926.2.4.10.1.2ColumnosProvY1564RsltStartedread-onlycurrentTimestamp, when this test has been started.
1.3.6.1.4.1.6926.2.4.10.1.3ColumnosProvY1564RsltTestRunStateread-onlycurrent.
1.3.6.1.4.1.6926.2.4.10.1.4ColumnosProvY1564RsltProtocolread-onlycurrentProtocol of a test.
1.3.6.1.4.1.6926.2.4.10.1.5ColumnosProvY1564RsltTestStepread-onlycurrentThe step of the test that the results relate to.
1.3.6.1.4.1.6926.2.4.10.1.6ColumnosProvY1564RsltLastTestTyperead-onlycurrentThe type of last executed test.
1.3.6.1.4.1.6926.2.4.10.1.7ColumnosProvY1564RsltTestStatusread-onlycurrentDid the test passed or failed
1.3.6.1.4.1.6926.2.4.10.1.8ColumnosProvY1564RsltRateread-onlycurrentThe rate of transmition frames GET operation always returns the last configured or default value.
1.3.6.1.4.1.6926.2.4.10.1.9ColumnosProvY1564RsltPacketLengthread-onlycurrentPacket length, including VLAN ID and CRC.
1.3.6.1.4.1.6926.2.4.10.1.10ColumnosProvY1564RsltDstMacread-onlycurrentFor Layer 2 tests is equal to osProvY1564FlowDstMac, for Layer 3 tests agent may place MAC address of NextHop.
1.3.6.1.4.1.6926.2.4.10.1.11ColumnosProvY1564RsltSrcMacread-onlycurrentFor Layer 2 tests is equal to osProvY1564FlowSrcMac, for Layer 3 tests agent may place MAC address of source interface.
1.3.6.1.4.1.6926.2.4.10.1.12ColumnosProvY1564RsltIpDstTyperead-onlycurrentFor Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvY1564FlowDstIpType.
1.3.6.1.4.1.6926.2.4.10.1.13ColumnosProvY1564RsltIpDstAddrread-onlycurrentFor Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvY1564FlowDstIpAddr.
1.3.6.1.4.1.6926.2.4.10.1.16ColumnosProvY1564RsltTxPortread-onlycurrent.
1.3.6.1.4.1.6926.2.4.10.1.21ColumnosProvY1564RsltTransmittedread-onlycurrentNumber of request packets transmitted the burst.
1.3.6.1.4.1.6926.2.4.10.1.22ColumnosProvY1564RsltReceivedread-onlycurrentNumber of reply packets received in the burst.
1.3.6.1.4.1.6926.2.4.10.1.23ColumnosProvY1564RsltRttMinread-onlycurrentThe minimum round-trip-time (RTT) received.
1.3.6.1.4.1.6926.2.4.10.1.24ColumnosProvY1564RsltRttMaxread-onlycurrentThe maximum round-trip-time (RTT) received.
1.3.6.1.4.1.6926.2.4.10.1.25ColumnosProvY1564RsltRttAverageread-onlycurrentThe average round-trip-time (RTT) received.
1.3.6.1.4.1.6926.2.4.10.1.26ColumnosProvY1564RsltRttSum2read-onlycurrentThis object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation.
1.3.6.1.4.1.6926.2.4.10.1.30ColumnosProvY1564RsltJittMinread-onlycurrentThe minimum value of all source-to-destination jitter values.
1.3.6.1.4.1.6926.2.4.10.1.32ColumnosProvY1564RsltJittMaxread-onlycurrentThe mahimum value of all source-to-destination jitter values.
1.3.6.1.4.1.6926.2.4.10.1.33ColumnosProvY1564RsltJittAverageread-onlycurrentThe average value of all source-to-destination jitter values.
1.3.6.1.4.1.6926.2.4.10.1.34ColumnosProvY1564RsltJittSum2read-onlycurrentThis object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation.
1.3.6.1.4.1.6926.2.4.10.1.35ColumnosProvY1564RsltDsJittMinread-onlycurrentThe minimum value of all destination-to-source jitter values.
1.3.6.1.4.1.6926.2.4.10.1.36ColumnosProvY1564RsltDsJittMaxread-onlycurrentThe mahimum value of all destination-to-source jitter values.
1.3.6.1.4.1.6926.2.4.10.1.37ColumnosProvY1564RsltDsJittAverageread-onlycurrentThe average value of all destination-to-source jitter values.
1.3.6.1.4.1.6926.2.4.10.1.38ColumnosProvY1564RsltDsJittSum2read-onlycurrentThis object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation.
1.3.6.1.4.1.6926.2.4.10.1.40ColumnosProvY1564RsltPcktLossread-onlycurrentThe calculation of packet loss value.
1.3.6.1.4.1.6926.2.4.10.1.42ColumnosProvY1564RsltLastTestFailedread-onlycurrent.
1.3.6.1.4.1.6926.2.4.11TableosProvY1564HistTablenot-accessiblecurrentThis table contain at most last osProvY1564MaxRows samples, each of them reflects results of comleted burst.
1.3.6.1.4.1.6926.2.4.11.1RowosProvY1564HistEntrynot-accessiblecurrentContains an entry of the osProvY1564HistTable table.
1.3.6.1.4.1.6926.2.4.11.1.2ColumnosProvY1564HistIndexnot-accessiblecurrentAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same osProvY1564FlowEntry. This index start…
1.3.6.1.4.1.6926.2.4.11.1.3ColumnosProvY1564HistStartedread-onlycurrentTimestamp, when this test has been started.
1.3.6.1.4.1.6926.2.4.11.1.4ColumnosProvY1564HistProtocolread-onlycurrentProtocol of a test.
1.3.6.1.4.1.6926.2.4.11.1.5ColumnosProvY1564HistTestStepread-onlycurrentThe step of the test that the results relate to.
1.3.6.1.4.1.6926.2.4.11.1.6ColumnosProvY1564HistTestTyperead-onlycurrentThe phase of the y1564 test (configuration or performance).
1.3.6.1.4.1.6926.2.4.11.1.7ColumnosProvY1564HistTestStatusread-onlycurrentDid the test passed or failed
1.3.6.1.4.1.6926.2.4.11.1.8ColumnosProvY1564HistRateread-onlycurrentThe rate of transmition frames GET operation always returns the last configured or default value.
1.3.6.1.4.1.6926.2.4.11.1.9ColumnosProvY1564HisPacketLengthread-onlycurrentPacket length, including VLAN ID and CRC.
1.3.6.1.4.1.6926.2.4.11.1.10ColumnosProvY1564HistDstMacread-onlycurrentFor Layer 2 tests is equal to osProvY1564FlowDstMac, for Layer 3 tests agent may place MAC address of NextHop.
1.3.6.1.4.1.6926.2.4.11.1.11ColumnosProvY1564HistSrcMacread-onlycurrentFor Layer 2 tests is equal to osProvY1564FlowSrcMac, for Layer 3 tests agent may place MAC address of source interface.
1.3.6.1.4.1.6926.2.4.11.1.12ColumnosProvY1564HistIpDstTyperead-onlycurrentFor Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvY1564FlowDstIpType.
1.3.6.1.4.1.6926.2.4.11.1.13ColumnosProvY1564HistIpDstAddrread-onlycurrentFor Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvY1564FlowDstIpAddr.
1.3.6.1.4.1.6926.2.4.11.1.16ColumnosProvY1564HistTxPortread-onlycurrent.
1.3.6.1.4.1.6926.2.4.11.1.21ColumnosProvY1564HistTransmittedread-onlycurrentNumber of request packets transmitted the burst.
1.3.6.1.4.1.6926.2.4.11.1.22ColumnosProvY1564HistReceivedread-onlycurrentNumber of reply packets received in the burst.
1.3.6.1.4.1.6926.2.4.11.1.23ColumnosProvY1564HistRttMinread-onlycurrentThe minimum round-trip-time (RTT) received.
1.3.6.1.4.1.6926.2.4.11.1.24ColumnosProvY1564HistRttMaxread-onlycurrentThe maximum round-trip-time (RTT) received.
1.3.6.1.4.1.6926.2.4.11.1.25ColumnosProvY1564HistRttAverageread-onlycurrentThe average round-trip-time (RTT) received.
1.3.6.1.4.1.6926.2.4.11.1.26ColumnosProvY1564HistRttSum2read-onlycurrentThis object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation.
1.3.6.1.4.1.6926.2.4.11.1.30ColumnosProvY1564HistJittMinread-onlycurrentThe minimum value of all source-to-destination jitter values.
1.3.6.1.4.1.6926.2.4.11.1.32ColumnosProvY1564HistJittMaxread-onlycurrentThe mahimum value of all source-to-destination jitter values.
1.3.6.1.4.1.6926.2.4.11.1.33ColumnosProvY1564HistJittAverageread-onlycurrentThe average value of all source-to-destination jitter values.
1.3.6.1.4.1.6926.2.4.11.1.34ColumnosProvY1564HistJittSum2read-onlycurrentThis object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation.
1.3.6.1.4.1.6926.2.4.11.1.35ColumnosProvY1564HistDsJittMinread-onlycurrentThe minimum value of all destination-to-source jitter values.
1.3.6.1.4.1.6926.2.4.11.1.36ColumnosProvY1564HistDsJittMaxread-onlycurrentThe mahimum value of all destination-to-source jitter values.
1.3.6.1.4.1.6926.2.4.11.1.37ColumnosProvY1564HistDsJittAverageread-onlycurrentThe average value of all destination-to-source jitter values.
1.3.6.1.4.1.6926.2.4.11.1.38ColumnosProvY1564HistDsJittSum2read-onlycurrentThis object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation.
1.3.6.1.4.1.6926.2.4.11.1.40ColumnosProvY1564HistPcktLossread-onlycurrentThe calculation of packet loss value.
1.3.6.1.4.1.6926.2.4.12TableosProvY1564HcRsltTablenot-accessiblecurrentThis 'High Capacity' table is an extension of osProvY1564RsltTable.
1.3.6.1.4.1.6926.2.4.12.1RowosProvY1564HcRsltEntrynot-accessiblecurrentContains an entry of the osProvY1564HcRsltTable table.
1.3.6.1.4.1.6926.2.4.12.1.21ColumnosProvY1564HcRsltTransmittedread-onlycurrentNumber of request packets transmitted the burst.
1.3.6.1.4.1.6926.2.4.12.1.22ColumnosProvY1564HcRsltReceivedread-onlycurrentNumber of reply packets received in the burst.
1.3.6.1.4.1.6926.2.4.13TableosProvY1564HcHistTablenot-accessiblecurrentThis 'High Capacity' table is an extension of osProvY1564HistTable.
1.3.6.1.4.1.6926.2.4.13.1RowosProvY1564HcHistEntrynot-accessiblecurrentContains an entry of the osProvY1564HcHistTable table.
1.3.6.1.4.1.6926.2.4.13.1.21ColumnosProvY1564HcHistTransmittedread-onlycurrentNumber of request packets transmitted the burst.
1.3.6.1.4.1.6926.2.4.13.1.22ColumnosProvY1564HcHistReceivedread-onlycurrentNumber of reply packets received in the burst.
1.3.6.1.4.1.6926.2.4.100NodeosProvY1564Conformance
1.3.6.1.4.1.6926.2.4.100.1NodeosProvY1564MIBCompliances
1.3.6.1.4.1.6926.2.4.100.1.1ComplianceosProvY1564MIBCompliancecurrentThe core compliance statement for all the implementations.
1.3.6.1.4.1.6926.2.4.100.2NodeosProvY1564MIBGroups
1.3.6.1.4.1.6926.2.4.100.2.1GrouposProvY1564MandatoryGroupcurrent.
1.3.6.1.4.1.6926.2.4.100.2.2GrouposY1564NotificationsGroupcurrentThe notification which are required to be supported by implementations of this MIB.
Type Definitions
NameSyntaxStatusDescription
TestProtocolINTEGER { unknown (1), l2Protocol (2), l3Protocol (5) }currentProtocol of a test. In Legacy OS these values mean: l2Protocol - dmmITUtY1731 (2), l3Protocol - icmpEcho (5) In OSA-V* these values mean: l2Protocol - LBM and selectively DMM l3Protocol - icmpEcho
TestRunStateINTEGER { notRunning (1), running (2), waitInQueue (3), readyForRun (4), idle (5), absent (6) }currentIndicates the running state of the Test and state of the its results: notRunning (1) - Test is not active, running (2) - Test is running, waitInQueue (3) - Test is waiting for hardware resources, readyForRun (4) - Test …
MIB Viewer