OS-RFC2544-MIB
266 objects
RFC 2544 Benchmarking Methodology for Network Interconnect Devices.
Imported Objects
| IEEE8021-CFM-MIB | VlanIdOrNone |
| INET-ADDRESS-MIB | -- RFC2571 InetAddressType InetAddress |
| OS-COMMON-TC-MIB | -- RFC2851 oaOptiSwitch PortIndexOrNone PortList RespType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926.2.7 | IdentityosRfc2544 | RFC 2544 Benchmarking Methodology for Network Interconnect Devices. | ||
| 1.3.6.1.4.1.6926.2.7.0 | NodeosRfc2544Notifications | |||
| 1.3.6.1.4.1.6926.2.7.0.1 | NotificationosRfc2544BurstComplete | current | Generated when a burst completes and bit burstComplete is set in osRfc2544TrapsGeneration. | |
| 1.3.6.1.4.1.6926.2.7.0.2 | NotificationosRfc2544BurstFail | current | Generated when a burst completes and bit burstFail is set in osRfc2544TrapsGeneration. | |
| 1.3.6.1.4.1.6926.2.7.0.3 | NotificationosRfc2544TestComplete | current | Generated when a test completes and bit testComplete is set in osRfc2544TrapsGeneration. | |
| 1.3.6.1.4.1.6926.2.7.0.5 | NotificationosRfc2544FdAlarm | current | Frame delay trap. | |
| 1.3.6.1.4.1.6926.2.7.0.6 | NotificationosRfc2544JittAlarm | current | Jitter trap. | |
| 1.3.6.1.4.1.6926.2.7.0.7 | NotificationosRfc2544PcktLossAlarm | current | Packet loss trap. | |
| 1.3.6.1.4.1.6926.2.7.1 | NodeosRfc2544Gen | |||
| 1.3.6.1.4.1.6926.2.7.1.1 | NodeosRfc2544Capabilities | |||
| 1.3.6.1.4.1.6926.2.7.1.1.1 | ScalarosRfc2544ProtocolSupported | read-only | current | Indicates protocols supported by this agent: l2Supported(0) means that l2Protocol of ITU-T Y.1721 is supported; l3Supported(1) means that l2Protocol of RFC792 … |
| 1.3.6.1.4.1.6926.2.7.1.1.2 | ScalarosRfc2544TestTypesSupported | read-only | current | Indicates types of tests, that supported by this agent. |
| 1.3.6.1.4.1.6926.2.7.1.1.3 | ScalarosRfc2544IpAddrTypesSupported | read-only | current | Indicates types of supported Internet address In terms of RFC 3291 (INET-ADDRESS-MIB). |
| 1.3.6.1.4.1.6926.2.7.1.1.4 | ScalarosRfc2544MinRate | read-only | current | Minimum positive value for osRfc2544Rate, supported by the aggent. |
| 1.3.6.1.4.1.6926.2.7.1.1.5 | ScalarosRfc2544MaxRate | read-only | current | Minimum value for osRfc2544Rate, supported by the aggent. |
| 1.3.6.1.4.1.6926.2.7.1.1.6 | ScalarosRfc2544MaxNumOfLengths | read-only | current | Maximum number of rows in osRfc2544LengthTable (minimum number is equal to '1'). |
| 1.3.6.1.4.1.6926.2.7.1.1.9 | ScalarosRfc2544WithConsideringDmms | read-write | current | The RFC25544 and Y.1564 streams include both LBM/LBR and DMM/DMR frames. If osRfc2544WithConsideringDmms is 'false', then only LBM/LBR are taken into account w… |
| 1.3.6.1.4.1.6926.2.7.1.2 | ScalarosRfc2544TholdReason | accessible-for-notify | current | . |
| 1.3.6.1.4.1.6926.2.7.2 | TableosRfc2544CtlTable | not-accessible | current | Rfc2544 service configuration table. |
| 1.3.6.1.4.1.6926.2.7.2.1 | RowosRfc2544CtlEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.7.2.1.1 | ColumnosRfc2544Owner | not-accessible | current | Owner name. |
| 1.3.6.1.4.1.6926.2.7.2.1.2 | ColumnosRfc2544Test | not-accessible | current | Test name. |
| 1.3.6.1.4.1.6926.2.7.2.1.3 | ColumnosRfc2544Descr | read-create | current | The purpose of this object is to provide a descriptive name of the remote ping test. |
| 1.3.6.1.4.1.6926.2.7.2.1.4 | ColumnosRfc2544TestType | read-create | current | . |
| 1.3.6.1.4.1.6926.2.7.2.1.5 | ColumnosRfc2544Protocol | read-create | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.7.2.1.6 | ColumnosRfc2544DstMac | read-create | current | If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544DstMac must be defined with a host physical address to be used as a remote host for performing an… |
| 1.3.6.1.4.1.6926.2.7.2.1.7 | ColumnosRfc2544SrcMac | read-create | current | If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544SrcMac must be defined. In case configured, override osRfc2544SrcMacRange parameter value. If osR… |
| 1.3.6.1.4.1.6926.2.7.2.1.8 | ColumnosRfc2544SrcMacRange | read-write | current | Defines customer source-mac range, i.e. multi source-mac addresses based on machine source-mac changing the thrid byte corresponding to the configured range. T… |
| 1.3.6.1.4.1.6926.2.7.2.1.10 | ColumnosRfc2544DstIpType | read-create | current | Specifies the type of host address to be used at a remote host for performing an operation. |
| 1.3.6.1.4.1.6926.2.7.2.1.11 | ColumnosRfc2544DstIpAddr | read-create | current | If osRfc2544Protocol is equal to l2Protocol(2), then he test cannot be enabled if osRfc2544DstIpAddr is not equal to 0.0.0.0. If osRfc2544Protocol is equal to … |
| 1.3.6.1.4.1.6926.2.7.2.1.12 | ColumnosRfc2544SrcIpType | read-create | current | Specifies the type of host address to be used at a source host for performing an operation. |
| 1.3.6.1.4.1.6926.2.7.2.1.13 | ColumnosRfc2544SrcIpAddr | read-create | current | If osRfc2544Protocol is equal to l2Protocol(2), then he test cannot be enabled if osRfc2544SrcIpAddr is not equal to 0.0.0.0. If osRfc2544Protocol is equal to … |
| 1.3.6.1.4.1.6926.2.7.2.1.14 | ColumnosRfc2544TxPort | read-create | current | If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544TxPort may be defined and used when osRfc2544DstMac is absent in learning table (FDB) to determin… |
| 1.3.6.1.4.1.6926.2.7.2.1.15 | ColumnosRfc2544VlanId | read-create | current | If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544VlanId must be defined with valid and non-zero value before the test start. If osRfc2544Protocol … |
| 1.3.6.1.4.1.6926.2.7.2.1.16 | ColumnosRfc2544BurstNumber | read-create | current | Number of bursts. The value 0 means forever. |
| 1.3.6.1.4.1.6926.2.7.2.1.17 | ColumnosRfc2544BurstInterval | read-create | current | Time interval between bursts, in seconds. |
| 1.3.6.1.4.1.6926.2.7.2.1.21 | ColumnosRfc2544ProbeNumber | read-create | current | Number of packets (probes) in a burst. If osRfc2544Duration is not equal to 0, this object does not make sense and is not used. Objects osRfc2544ProbeNumber an… |
| 1.3.6.1.4.1.6926.2.7.2.1.22 | ColumnosRfc2544Duration | read-create | current | Duration of one burst. The value 0 means, that osRfc2544ProbeNumber will be used. Objects osRfc2544ProbeNumber and osRfc2544Duration DO NOT NECESSARILY CORRESP… |
| 1.3.6.1.4.1.6926.2.7.2.1.24 | ColumnosRfc2544ProbeInterval | read-create | current | The interval between transmitted frames in a burst. This object is not used if osRfc2544Rate is not equal to 0. Objects osRfc2544ProbeInterval and osRfc2544Rat… |
| 1.3.6.1.4.1.6926.2.7.2.1.25 | ColumnosRfc2544Rate | read-create | current | The rate of transmition frames in bursts. The value 0 means, that osRfc2544ProbeInterval will be used. Objects osRfc2544ProbeInterval and osRfc2544Rate DO NOT … |
| 1.3.6.1.4.1.6926.2.7.2.1.26 | ColumnosRfc2544ProbeTimeout | read-create | current | Specifies the duration to wait for a responce (milliseconds). |
| 1.3.6.1.4.1.6926.2.7.2.1.28 | ColumnosRfc2544AllwdPcktLoss | read-create | current | Maximum loss ratio allowed in the throughput test. |
| 1.3.6.1.4.1.6926.2.7.2.1.29 | ColumnosRfc2544MinStep | read-create | current | Minimum rate step in the throughput test. |
| 1.3.6.1.4.1.6926.2.7.2.1.32 | ColumnosRfc2544PacketLength | read-create | current | Packet length, including VLAN ID and CRC. For throughput(2) and latency(3) returns first value from osRfc2544LengthValue as a reply on GET operation and reject… |
| 1.3.6.1.4.1.6926.2.7.2.1.35 | ColumnosRfc2544DataFill | read-create | current | Determine how to fill the data portion of a probe packet, while number of characters is a multiple of 8. |
| 1.3.6.1.4.1.6926.2.7.2.1.36 | ColumnosRfc2544DSField | read-create | current | . |
| 1.3.6.1.4.1.6926.2.7.2.1.37 | ColumnosRfc2544Ttl | read-create | current | Time To Live. |
| 1.3.6.1.4.1.6926.2.7.2.1.38 | ColumnosRfc2544Priority | read-create | current | Priority Code Point (PCP): a 3-bit field which refers to the IEEE 802.1p priority. It indicates the frame priority level from 0 (lowest) to 7 (highest), which … |
| 1.3.6.1.4.1.6926.2.7.2.1.39 | ColumnosRfc2544MdLevel | read-create | current | Maintenance Domain Level (MD Level) as described in 802.1ag. Higher numbers correspond to higher Maintenance Domains. Only valid If osRfc2544Protocol is equal … |
| 1.3.6.1.4.1.6926.2.7.2.1.50 | ColumnosRfc2544MaxRows | read-create | current | The maximum number of entries allowed in the osRfc2544HistTable. An implementation of this MIB will remove the oldest entry in the osRfc2544HistTable to allow … |
| 1.3.6.1.4.1.6926.2.7.2.1.55 | ColumnosRfc2544TrapsGeneration | read-create | current | The value of this object determines when and if to generate a notification for this entry: burstComplete(0)- Generate a osRfc2544BurstComplete notification. bu… |
| 1.3.6.1.4.1.6926.2.7.2.1.60 | ColumnosRfc2544TholdFdRiseThold | read-create | current | Frame delay (Average of Round Trip Time) Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.7.2.1.61 | ColumnosRfc2544TholdFdFallThold | read-create | current | Frame delay (Average of Round Trip Time) Falling threshold |
| 1.3.6.1.4.1.6926.2.7.2.1.62 | ColumnosRfc2544TholdJittRiseThold | read-create | current | Jitter Rising threshold. Value 0 means, that this the agent will not check this type of threshold. |
| 1.3.6.1.4.1.6926.2.7.2.1.63 | ColumnosRfc2544TholdJittFallThold | read-create | current | Jitter Falling threshold. |
| 1.3.6.1.4.1.6926.2.7.2.1.64 | ColumnosRfc2544TholdPcktLossRiseThold | read-create | current | The packet loss Rising threshold. |
| 1.3.6.1.4.1.6926.2.7.2.1.65 | ColumnosRfc2544TholdPcktLossFallThold | read-create | current | The packet loss Falling threshold. |
| 1.3.6.1.4.1.6926.2.7.2.1.99 | ColumnosRfc2544RowStatus | read-create | current | This object allows entries to be created, deleted, activated and deactivated. Deletion of an entry in this table results in all corresponding tables being dele… |
| 1.3.6.1.4.1.6926.2.7.3 | TableosRfc2544ResultsTable | not-accessible | current | This table contain the last completed burst results. Exception is the object osRfc2544ResultsTestRunState - it indicates a current state of the test. |
| 1.3.6.1.4.1.6926.2.7.3.1 | RowosRfc2544ResultsEntry | not-accessible | current | Contains an entry of the osRfc2544ResultsTable table. |
| 1.3.6.1.4.1.6926.2.7.3.1.4 | ColumnosRfc2544ResultsStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.7.3.1.5 | ColumnosRfc2544ResultsTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.3.1.6 | ColumnosRfc2544ResultsRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.3.1.7 | ColumnosRfc2544ResultsTestRunState | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.3.1.8 | ColumnosRfc2544ResultsProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.7.3.1.10 | ColumnosRfc2544ResultsDstMac | read-only | current | For Layer 2 tests is equal to osRfc2544DstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.7.3.1.11 | ColumnosRfc2544ResultsSrcMac | read-only | current | For Layer 2 tests is equal to osRfc2544SrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.7.3.1.12 | ColumnosRfc2544ResultsIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpType. |
| 1.3.6.1.4.1.6926.2.7.3.1.13 | ColumnosRfc2544ResultsIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpAddr. |
| 1.3.6.1.4.1.6926.2.7.3.1.14 | ColumnosRfc2544ResultsIpSrcType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpType. |
| 1.3.6.1.4.1.6926.2.7.3.1.15 | ColumnosRfc2544ResultsIpSrcAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpAddr. |
| 1.3.6.1.4.1.6926.2.7.3.1.16 | ColumnosRfc2544ResultsTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.3.1.17 | ColumnosRfc2544ResultsVlanId | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.3.1.20 | ColumnosRfc2544ResultsHistIndx | read-only | current | Corresponding osRfc2544HistoryIndex. |
| 1.3.6.1.4.1.6926.2.7.3.1.21 | ColumnosRfc2544ResultsMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.3.1.22 | ColumnosRfc2544ResultsMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.3.1.23 | ColumnosRfc2544ResultsRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.3.1.24 | ColumnosRfc2544ResultsRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.3.1.25 | ColumnosRfc2544ResultsRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.3.1.26 | ColumnosRfc2544ResultsRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.3.1.30 | ColumnosRfc2544ResultsJittMin | read-only | current | The minimum value of all source-to-destiantion jitter values. |
| 1.3.6.1.4.1.6926.2.7.3.1.32 | ColumnosRfc2544ResultsJittMax | read-only | current | The mahimum value of all source-to-destiantion jitter values. |
| 1.3.6.1.4.1.6926.2.7.3.1.33 | ColumnosRfc2544ResultsJittAverage | read-only | current | The average value of all source-to-destiantion jitter values. |
| 1.3.6.1.4.1.6926.2.7.3.1.34 | ColumnosRfc2544ResultsJittSum2 | read-only | current | This object contains the sum of the squares for source-to-destiantion all jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.3.1.35 | ColumnosRfc2544ResultsDsJittMin | read-only | current | The minimum value of all destiantion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.3.1.36 | ColumnosRfc2544ResultsDsJittMax | read-only | current | The mahimum value of all destiantion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.3.1.37 | ColumnosRfc2544ResultsDsJittAverage | read-only | current | The average value of all destiantion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.3.1.38 | ColumnosRfc2544ResultsDsJittSum2 | read-only | current | This object contains the sum of the squares for destiantion-to-source all jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.3.1.40 | ColumnosRfc2544ResultsPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.7.3.1.46 | ColumnosRfc2544ResultsProbeInterval | read-only | current | The interval between packets. Objects osRfc2544ResultsProbeInterval and osRfc2544ResultsRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate has been co… |
| 1.3.6.1.4.1.6926.2.7.3.1.47 | ColumnosRfc2544ResultsRate | read-only | current | The rate of transmition frames in bursts. Objects osRfc2544ResultsProbeInterval and osRfc2544ResultsRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate… |
| 1.3.6.1.4.1.6926.2.7.3.1.48 | ColumnosRfc2544ResultsPacketLength | read-only | current | This object is equal to corresponding osRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.7.3.1.55 | ColumnosRfc2544ResultsPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.7.3.1.57 | ColumnosRfc2544ResultsDSField | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.3.1.58 | ColumnosRfc2544ResultsMdLevel | read-only | current | Md Level number. |
| 1.3.6.1.4.1.6926.2.7.4 | TableosRfc2544HistoryTable | not-accessible | current | This table contain at most last osRfc2544MaxRows samples, each of them reflects results of comleted burst. |
| 1.3.6.1.4.1.6926.2.7.4.1 | RowosRfc2544HistoryEntry | not-accessible | current | Contains an entry of the osRfc2544HistoryTable table. |
| 1.3.6.1.4.1.6926.2.7.4.1.3 | ColumnosRfc2544HistoryIndex | not-accessible | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same osRfc2544CtlEntry. This index starts a… |
| 1.3.6.1.4.1.6926.2.7.4.1.4 | ColumnosRfc2544HistoryStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.7.4.1.5 | ColumnosRfc2544HistoryTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.4.1.6 | ColumnosRfc2544HistoryRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.4.1.8 | ColumnosRfc2544HistoryProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.7.4.1.10 | ColumnosRfc2544HistoryDstMac | read-only | current | For Layer 2 tests is equal to osRfc2544DstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.7.4.1.11 | ColumnosRfc2544HistorySrcMac | read-only | current | For Layer 2 tests is equal to osRfc2544SrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.7.4.1.12 | ColumnosRfc2544HistoryIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpType. |
| 1.3.6.1.4.1.6926.2.7.4.1.13 | ColumnosRfc2544HistoryIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpAddr. |
| 1.3.6.1.4.1.6926.2.7.4.1.14 | ColumnosRfc2544HistoryIpSrcType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpType. |
| 1.3.6.1.4.1.6926.2.7.4.1.15 | ColumnosRfc2544HistoryIpSrcAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpAddr. |
| 1.3.6.1.4.1.6926.2.7.4.1.16 | ColumnosRfc2544HistoryTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.4.1.17 | ColumnosRfc2544HistoryVlanId | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.4.1.21 | ColumnosRfc2544HistoryMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.4.1.22 | ColumnosRfc2544HistoryMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.4.1.23 | ColumnosRfc2544HistoryRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.4.1.24 | ColumnosRfc2544HistoryRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.4.1.25 | ColumnosRfc2544HistoryRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.4.1.26 | ColumnosRfc2544HistoryRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.4.1.30 | ColumnosRfc2544HistoryJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.4.1.32 | ColumnosRfc2544HistoryJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.4.1.33 | ColumnosRfc2544HistoryJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.4.1.34 | ColumnosRfc2544HistoryJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.4.1.35 | ColumnosRfc2544HistoryDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.4.1.36 | ColumnosRfc2544HistoryDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.4.1.37 | ColumnosRfc2544HistoryDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.4.1.38 | ColumnosRfc2544HistoryDsJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.4.1.40 | ColumnosRfc2544HistoryPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.7.4.1.46 | ColumnosRfc2544HistoryProbeInterval | read-only | current | The interval between packets. Objects osRfc2544HistoryProbeInterval and osRfc2544HistoryRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate has been co… |
| 1.3.6.1.4.1.6926.2.7.4.1.47 | ColumnosRfc2544HistoryRate | read-only | current | The rate of transmition frames in bursts. Objects osRfc2544HistoryProbeInterval and osRfc2544HistoryRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate… |
| 1.3.6.1.4.1.6926.2.7.4.1.48 | ColumnosRfc2544HistoryPacketLength | read-only | current | This object is equal to corresponding osRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.7.4.1.55 | ColumnosRfc2544HistoryPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.7.4.1.57 | ColumnosRfc2544HistoryDSField | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.4.1.58 | ColumnosRfc2544HistoryMdLevel | read-only | current | Md Level number. |
| 1.3.6.1.4.1.6926.2.7.5 | TableosRfc2544LengthTable | not-accessible | current | Rfc2544 service configuration table. |
| 1.3.6.1.4.1.6926.2.7.5.1 | RowosRfc2544LengthEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.7.5.1.3 | ColumnosRfc2544LengthValue | not-accessible | current | . |
| 1.3.6.1.4.1.6926.2.7.5.1.4 | ColumnosRfc2544LengthStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.7.5.1.5 | ColumnosRfc2544LengthTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.5.1.7 | ColumnosRfc2544LengthTestRunState | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.5.1.8 | ColumnosRfc2544LengthProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.7.5.1.10 | ColumnosRfc2544LengthDstMac | read-only | current | For Layer 2 tests is equal to osRfc2544DstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.7.5.1.11 | ColumnosRfc2544LengthSrcMac | read-only | current | For Layer 2 tests is equal to osRfc2544SrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.7.5.1.12 | ColumnosRfc2544LengthIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpType. |
| 1.3.6.1.4.1.6926.2.7.5.1.13 | ColumnosRfc2544LengthIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpAddr. |
| 1.3.6.1.4.1.6926.2.7.5.1.14 | ColumnosRfc2544LengthIpSrcType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpType. |
| 1.3.6.1.4.1.6926.2.7.5.1.15 | ColumnosRfc2544LengthIpSrcAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpAddr. |
| 1.3.6.1.4.1.6926.2.7.5.1.16 | ColumnosRfc2544LengthTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.5.1.17 | ColumnosRfc2544LengthVlanId | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.5.1.21 | ColumnosRfc2544LengthMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.5.1.22 | ColumnosRfc2544LengthMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.5.1.23 | ColumnosRfc2544LengthRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.5.1.24 | ColumnosRfc2544LengthRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.5.1.25 | ColumnosRfc2544LengthRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.5.1.26 | ColumnosRfc2544LengthRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.5.1.30 | ColumnosRfc2544LengthJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.5.1.32 | ColumnosRfc2544LengthJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.5.1.33 | ColumnosRfc2544LengthJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.5.1.34 | ColumnosRfc2544LengthJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.5.1.35 | ColumnosRfc2544LengthDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.5.1.36 | ColumnosRfc2544LengthDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.5.1.37 | ColumnosRfc2544LengthDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.5.1.38 | ColumnosRfc2544LengthDsJittSum2 | read-only | current | This object contains the sum of the squares for all destination-to-source jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.5.1.40 | ColumnosRfc2544LengthPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.7.5.1.46 | ColumnosRfc2544LengthProbeInterval | read-only | current | The interval between packets. Objects osRfc2544LengthProbeInterval and osRfc2544ResultsRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate has been con… |
| 1.3.6.1.4.1.6926.2.7.5.1.47 | ColumnosRfc2544LengthRate | read-only | current | The rate of transmition frames in bursts. Objects osRfc2544ResultsProbeInterval and osRfc2544ResultsRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate… |
| 1.3.6.1.4.1.6926.2.7.5.1.55 | ColumnosRfc2544LengthPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.7.5.1.57 | ColumnosRfc2544LengthDSField | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.5.1.58 | ColumnosRfc2544LengthMdLevel | read-only | current | Md Level number. |
| 1.3.6.1.4.1.6926.2.7.5.1.99 | ColumnosRfc2544LengthAdminStatus | read-create | current | . |
| 1.3.6.1.4.1.6926.2.7.6 | TableosRfc2544HcResultsTable | not-accessible | current | This 'High Capacity' table is an extension of osRfc2544ResultsTable. |
| 1.3.6.1.4.1.6926.2.7.6.1 | RowosRfc2544HcResultsEntry | not-accessible | current | Contains an entry of the osRfc2544HcResultsTable table. |
| 1.3.6.1.4.1.6926.2.7.6.1.21 | ColumnosRfc2544HcResultsMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.6.1.22 | ColumnosRfc2544HcResultsMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.7 | TableosRfc2544HcHistoryTable | not-accessible | current | This 'High Capacity' table is an extension of osRfc2544HistoryTable. |
| 1.3.6.1.4.1.6926.2.7.7.1 | RowosRfc2544HcHistoryEntry | not-accessible | current | Contains an entry of the osRfc2544HcHistoryTable table. |
| 1.3.6.1.4.1.6926.2.7.7.1.21 | ColumnosRfc2544HcHistoryMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.7.1.22 | ColumnosRfc2544HcHistoryMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.8 | TableosRfc2544HcLengthTable | not-accessible | current | This 'High Capacity' table is an extension of osRfc2544LengthTable. |
| 1.3.6.1.4.1.6926.2.7.8.1 | RowosRfc2544HcLengthEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.7.8.1.21 | ColumnosRfc2544HcLengthMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.8.1.22 | ColumnosRfc2544HcLengthMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.9 | TableosRfc2544HistoryAccumulatedTable | not-accessible | current | This table contain at most last osRfc2544MaxRows samples, all bursts run from single test start accumulated in single entry. |
| 1.3.6.1.4.1.6926.2.7.9.1 | RowosRfc2544HistoryAccumulatedEntry | not-accessible | current | Contains an entry of the osRfc2544HistoryAccumulatedTable table. |
| 1.3.6.1.4.1.6926.2.7.9.1.3 | ColumnosRfc2544HistoryAccumulatedIndex | not-accessible | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same osRfc2544CtlEntry. This index starts a… |
| 1.3.6.1.4.1.6926.2.7.9.1.4 | ColumnosRfc2544HistoryAccumulatedStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.7.9.1.5 | ColumnosRfc2544HistoryAccumulatedBurstsNumber | read-only | current | Number of bursts in accumulated entry. |
| 1.3.6.1.4.1.6926.2.7.9.1.6 | ColumnosRfc2544HistoryAccumulatedTotalDuration | read-only | current | Total running time of accumulated entry. |
| 1.3.6.1.4.1.6926.2.7.9.1.7 | ColumnosRfc2544HistoryAccumulatedTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.9.1.8 | ColumnosRfc2544HistoryAccumulatedRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.9.1.9 | ColumnosRfc2544HistoryAccumulatedProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.7.9.1.10 | ColumnosRfc2544HistoryAccumulatedDstMac | read-only | current | For Layer 2 tests is equal to osRfc2544DstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.7.9.1.11 | ColumnosRfc2544HistoryAccumulatedSrcMac | read-only | current | For Layer 2 tests is equal to osRfc2544SrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.7.9.1.12 | ColumnosRfc2544HistoryAccumulatedIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpType. |
| 1.3.6.1.4.1.6926.2.7.9.1.13 | ColumnosRfc2544HistoryAccumulatedIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpAddr. |
| 1.3.6.1.4.1.6926.2.7.9.1.14 | ColumnosRfc2544HistoryAccumulatedIpSrcType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpType. |
| 1.3.6.1.4.1.6926.2.7.9.1.15 | ColumnosRfc2544HistoryAccumulatedIpSrcAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpAddr. |
| 1.3.6.1.4.1.6926.2.7.9.1.16 | ColumnosRfc2544HistoryAccumulatedTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.9.1.17 | ColumnosRfc2544HistoryAccumulatedVlanId | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.9.1.21 | ColumnosRfc2544HistoryAccumulatedMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.9.1.22 | ColumnosRfc2544HistoryAccumulatedMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.9.1.23 | ColumnosRfc2544HistoryAccumulatedRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.9.1.24 | ColumnosRfc2544HistoryAccumulatedRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.9.1.25 | ColumnosRfc2544HistoryAccumulatedRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.9.1.26 | ColumnosRfc2544HistoryAccumulatedRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.9.1.30 | ColumnosRfc2544HistoryAccumulatedJittMin | read-only | current | The minimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.9.1.32 | ColumnosRfc2544HistoryAccumulatedJittMax | read-only | current | The mahimum value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.9.1.33 | ColumnosRfc2544HistoryAccumulatedJittAverage | read-only | current | The average value of all source-to-destination jitter values. |
| 1.3.6.1.4.1.6926.2.7.9.1.34 | ColumnosRfc2544HistoryAccumulatedJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.9.1.35 | ColumnosRfc2544HistoryAccumulatedDsJittMin | read-only | current | The minimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.9.1.36 | ColumnosRfc2544HistoryAccumulatedDsJittMax | read-only | current | The mahimum value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.9.1.37 | ColumnosRfc2544HistoryAccumulatedDsJittAverage | read-only | current | The average value of all destination-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.9.1.38 | ColumnosRfc2544HistoryAccumulatedDsJittSum2 | read-only | current | This object contains the sum of the squares for all source-to-destination jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.9.1.40 | ColumnosRfc2544HistoryAccumulatedPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.7.9.1.46 | ColumnosRfc2544HistoryAccumulatedProbeInterval | read-only | current | The interval between packets. Objects osRfc2544HistoryAccumulatedProbeInterval and osRfc2544HistoryAccumulatedRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osR… |
| 1.3.6.1.4.1.6926.2.7.9.1.47 | ColumnosRfc2544HistoryAccumulatedRate | read-only | current | The rate of transmition frames in bursts. Objects osRfc2544HistoryAccumulatedProbeInterval and osRfc2544HistoryAccumulatedRate MUST ALWAYS CORRESPOND TO EACH O… |
| 1.3.6.1.4.1.6926.2.7.9.1.48 | ColumnosRfc2544HistoryAccumulatedPacketLength | read-only | current | This object is equal to corresponding osRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.7.9.1.55 | ColumnosRfc2544HistoryAccumulatedPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.7.9.1.57 | ColumnosRfc2544HistoryAccumulatedDSField | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.9.1.58 | ColumnosRfc2544HistoryAccumulatedMdLevel | read-only | current | Md Level number. |
| 1.3.6.1.4.1.6926.2.7.10 | TableosRfc2544ResultsAccumulatedTable | not-accessible | current | This table contain the last completed accumulated bursts results. |
| 1.3.6.1.4.1.6926.2.7.10.1 | RowosRfc2544ResultsAccumulatedEntry | not-accessible | current | Contains an entry of the osRfc2544ResultsAccumulatedTable table. |
| 1.3.6.1.4.1.6926.2.7.10.1.4 | ColumnosRfc2544ResultsAccumulatedStarted | read-only | current | Timestamp, when this test has been started. |
| 1.3.6.1.4.1.6926.2.7.10.1.5 | ColumnosRfc2544ResultsAccumulatedBurstsNumber | read-only | current | Number of bursts in accumulated entry |
| 1.3.6.1.4.1.6926.2.7.10.1.6 | ColumnosRfc2544ResultsAccumulatedTotalDuration | read-only | current | Running time of accumulated entry |
| 1.3.6.1.4.1.6926.2.7.10.1.7 | ColumnosRfc2544ResultsAccumulatedTestType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.10.1.8 | ColumnosRfc2544ResultsAccumulatedRespType | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.10.1.9 | ColumnosRfc2544ResultsAccumulatedTestRunState | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.10.1.10 | ColumnosRfc2544ResultsAccumulatedProtocol | read-only | current | Protocol of a test. |
| 1.3.6.1.4.1.6926.2.7.10.1.11 | ColumnosRfc2544ResultsAccumulatedDstMac | read-only | current | For Layer 2 tests is equal to osRfc2544DstMac, for Layer 3 tests agent may place MAC address of NextHop. |
| 1.3.6.1.4.1.6926.2.7.10.1.12 | ColumnosRfc2544ResultsAccumulatedSrcMac | read-only | current | For Layer 2 tests is equal to osRfc2544SrcMac, for Layer 3 tests agent may place MAC address of source interface. |
| 1.3.6.1.4.1.6926.2.7.10.1.13 | ColumnosRfc2544ResultsAccumulatedIpDstType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpType. |
| 1.3.6.1.4.1.6926.2.7.10.1.14 | ColumnosRfc2544ResultsAccumulatedIpDstAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpAddr. |
| 1.3.6.1.4.1.6926.2.7.10.1.15 | ColumnosRfc2544ResultsAccumulatedIpSrcType | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpType. |
| 1.3.6.1.4.1.6926.2.7.10.1.16 | ColumnosRfc2544ResultsAccumulatedIpSrcAddr | read-only | current | For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpAddr. |
| 1.3.6.1.4.1.6926.2.7.10.1.17 | ColumnosRfc2544ResultsAccumulatedTxPort | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.10.1.18 | ColumnosRfc2544ResultsAccumulatedVlanId | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.10.1.20 | ColumnosRfc2544ResultsAccumulatedHistIndx | read-only | current | Corresponding osRfc2544HistoryIndex. |
| 1.3.6.1.4.1.6926.2.7.10.1.21 | ColumnosRfc2544ResultsAccumulatedMsgTransmitted | read-only | current | Number of request packets transmitted the burst. |
| 1.3.6.1.4.1.6926.2.7.10.1.22 | ColumnosRfc2544ResultsAccumulatedMsgReceived | read-only | current | Number of reply packets received in the burst. |
| 1.3.6.1.4.1.6926.2.7.10.1.23 | ColumnosRfc2544ResultsAccumulatedRttMin | read-only | current | The minimum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.10.1.24 | ColumnosRfc2544ResultsAccumulatedRttMax | read-only | current | The maximum round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.10.1.25 | ColumnosRfc2544ResultsAccumulatedRttAverage | read-only | current | The average round-trip-time (RTT) received. |
| 1.3.6.1.4.1.6926.2.7.10.1.26 | ColumnosRfc2544ResultsAccumulatedRttSum2 | read-only | current | This object contains the sum of the squares for all round-trip-times (RTT) received. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.10.1.30 | ColumnosRfc2544ResultsAccumulatedJittMin | read-only | current | The minimum value of all source-to-destiantion jitter values. |
| 1.3.6.1.4.1.6926.2.7.10.1.32 | ColumnosRfc2544ResultsAccumulatedJittMax | read-only | current | The mahimum value of all source-to-destiantion jitter values. |
| 1.3.6.1.4.1.6926.2.7.10.1.33 | ColumnosRfc2544ResultsAccumulatedJittAverage | read-only | current | The average value of all source-to-destiantion jitter values. |
| 1.3.6.1.4.1.6926.2.7.10.1.34 | ColumnosRfc2544ResultsAccumulatedJittSum2 | read-only | current | This object contains the sum of the squares for source-to-destiantion all jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.10.1.35 | ColumnosRfc2544ResultsAccumulatedDsJittMin | read-only | current | The minimum value of all destiantion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.10.1.36 | ColumnosRfc2544ResultsAccumulatedDsJittMax | read-only | current | The mahimum value of all destiantion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.10.1.37 | ColumnosRfc2544ResultsAccumulatedDsJittAverage | read-only | current | The average value of all destiantion-to-source jitter values. |
| 1.3.6.1.4.1.6926.2.7.10.1.38 | ColumnosRfc2544ResultsAccumulatedDsJittSum2 | read-only | current | This object contains the sum of the squares for destiantion-to-source all jitter values. Its purpose is to enable standard deviation calculation. |
| 1.3.6.1.4.1.6926.2.7.10.1.40 | ColumnosRfc2544ResultsAccumulatedPcktLoss | read-only | current | The calculation of packet loss value. |
| 1.3.6.1.4.1.6926.2.7.10.1.46 | ColumnosRfc2544ResultsAccumulatedProbeInterval | read-only | current | The interval between packets. Objects osRfc2544ResultsAccumulatedProbeInterval and osRfc2544ResultsAccumulatedRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osR… |
| 1.3.6.1.4.1.6926.2.7.10.1.47 | ColumnosRfc2544ResultsAccumulatedRate | read-only | current | The rate of transmition frames in bursts. Objects osRfc2544ResultsAccumulatedProbeInterval and osRfc2544ResultsAccumulatedRate MUST ALWAYS CORRESPOND TO EACH O… |
| 1.3.6.1.4.1.6926.2.7.10.1.48 | ColumnosRfc2544ResultsAccumulatedPacketLength | read-only | current | This object is equal to corresponding osRfc2544PacketLength. |
| 1.3.6.1.4.1.6926.2.7.10.1.55 | ColumnosRfc2544ResultsAccumulatedPriority | read-only | current | Priority number. |
| 1.3.6.1.4.1.6926.2.7.10.1.57 | ColumnosRfc2544ResultsAccumulatedDSField | read-only | current | . |
| 1.3.6.1.4.1.6926.2.7.10.1.58 | ColumnosRfc2544ResultsAccumulatedMdLevel | read-only | current | Md Level number. |
| 1.3.6.1.4.1.6926.2.7.100 | NodeosRfc2544Conformance | |||
| 1.3.6.1.4.1.6926.2.7.100.1 | NodeosRfc2544MIBCompliances | |||
| 1.3.6.1.4.1.6926.2.7.100.1.1 | ComplianceosRfc2544MIBCompliance | current | The core compliance statement for all the implementations. | |
| 1.3.6.1.4.1.6926.2.7.100.2 | NodeosRfc2544MIBGroups | |||
| 1.3.6.1.4.1.6926.2.7.100.2.1 | GrouposRfc2544MandatoryGroup | current | . | |
| 1.3.6.1.4.1.6926.2.7.100.2.2 | GrouposRfc2544NotificationsGroup | current | The notification which are required to be supported by implementations of this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DSField | Unsigned32 (0..255) | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class … |
| TestProtocol | INTEGER { unknown (1), l2Protocol (2), l3Protocol (5) } | current | Protocol of a test. In Legacy OS these values mean: l2Protocol - dmmITUtY1731 (2), l3Protocol - icmpEcho (5) In OSA-V* these values mean: l2Protocol - LBM and selectively DMM l3Protocol - icmpEcho |
| TestRunState | INTEGER { notRunning (1), running (2), waitInQueue (3), readyForRun (4), idle (5) } | current | Indicates the running state of the Test: notRunning (1) - Test is not active, running (2) - Test is running, waitInQueue (3) - Test is waiting for hardware resources, readyForRun (4) - Test have received hardware resour… |
| TestType | INTEGER { unknown (1), throughput (2), latency (3), frameLossRate(4), basic (5) } | current | Indicates the type of the test: - throughput(2): The device sends a specific number of frames at a specific rate and then count the replies. The frame loss ratios calculated. If this frame loss ration is geater than osR… |