OSA-TWAMP-MIB
39 objects
TWAMP ADVA Private MIB for XG150 family products.
Imported Objects
| ADVA-MIB | advaMIB |
| IEEE8021-CFM-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- TEXTUAL-CONVENTION DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.8 | IdentityosaTwamp | TWAMP ADVA Private MIB for XG150 family products. | ||
| 1.3.6.1.4.1.2544.8.0 | NodeosaTwampNotifications | |||
| 1.3.6.1.4.1.2544.8.0.1 | NotificationosaTwampMaxSessionsExceeded | current | This notification is generated when number of sessions exceeding the maximum number supported sessions. | |
| 1.3.6.1.4.1.2544.8.1 | NodeosaTwampGlobals | |||
| 1.3.6.1.4.1.2544.8.1.1 | ScalarosaTwampResponderIgnoreEs | read-write | current | According to RFC5357 Error estimate multiplier field MUST NOT be set to zero. If multiplier is zero the packet considered corrupt and should be discarded. For … |
| 1.3.6.1.4.1.2544.8.2 | TableosaTwampResponderTable | not-accessible | current | This table contains TWAMP Responders. |
| 1.3.6.1.4.1.2544.8.2.1 | RowosaTwampResponderEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.2544.8.2.1.1 | ColumnosaTwampResponderIndex | not-accessible | current | An integer index used to uniquely identify a TWAMP Responder. |
| 1.3.6.1.4.1.2544.8.2.1.2 | ColumnosaTwampResponderAlias | read-create | current | An alias associated with the TWAMP Responder. |
| 1.3.6.1.4.1.2544.8.2.1.3 | ColumnosaTwampResponderControlMode | read-create | current | Responder control mode. When ControlMode is set to ControlDisabled - TWAMP Light Mode is used. |
| 1.3.6.1.4.1.2544.8.2.1.4 | ColumnosaTwampResponderIdleTimeout | read-create | current | When a TWAMP Test packet Is not received for this timeout period the TWAMP Session will go to IDLE state where Aging timer is started. This time is specified i… |
| 1.3.6.1.4.1.2544.8.2.1.5 | ColumnosaTwampResponderAgingTimeout | read-create | current | After a Session goes into IDLE state this timer with this timeout is started and on expiry the Session will terminate. This time is specified in seconds. |
| 1.3.6.1.4.1.2544.8.2.1.6 | ColumnosaTwampResponderVlanTag | read-create | current | This is the outer VLAN ID of the received TWAMP test packets. |
| 1.3.6.1.4.1.2544.8.2.1.7 | ColumnosaTwampResponderSourceIpAddress | read-create | current | IPv4/IPv6 Address of the local Responder interface. |
| 1.3.6.1.4.1.2544.8.2.1.8 | ColumnosaTwampResponderRemoteClientIpAddress | read-create | current | IPv4/IPv6 Address of the remote client sender. |
| 1.3.6.1.4.1.2544.8.2.1.9 | ColumnosaTwampResponderSourceUdpPort | read-create | current | This is the UDP Port of the local Responder. |
| 1.3.6.1.4.1.2544.8.2.1.10 | ColumnosaTwampResponderRemoteClientUdpPort | read-create | current | This is the UDP Port of the remote client. This UDP port is used by the TWAMP sender as the source udp port |
| 1.3.6.1.4.1.2544.8.2.1.11 | ColumnosaTwampResponderSequenceAction | read-create | current | Sequence number action clearSequenceNumber will reset the reflector sequence numbering. |
| 1.3.6.1.4.1.2544.8.2.1.12 | ColumnosaTwampResponderState | read-only | current | This is the state describing the reflector status |
| 1.3.6.1.4.1.2544.8.2.1.13 | ColumnosaTwampResponderRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.2544.8.3 | TableosaTwampResponderSessionTable | not-accessible | current | This table contains TWAMP dynamic sessions related to specific responder. |
| 1.3.6.1.4.1.2544.8.3.1 | RowosaTwampResponderSessionEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.2544.8.3.1.1 | ColumnosaTwampResponderServerIndex | not-accessible | current | An integer index used to uniquely identify a TWAMP Responder. |
| 1.3.6.1.4.1.2544.8.3.1.2 | ColumnosaTwampResponderSessionIndex | not-accessible | current | An integer index used to uniquely identify a TWAMP session. |
| 1.3.6.1.4.1.2544.8.3.1.3 | ColumnosaTwampResponderSessionIdleTimeout | read-only | current | When a TWAMP Test packet Is not received for this timeout period the TWAMP Session will go to IDLE state where Aging timer is started. This time is specified i… |
| 1.3.6.1.4.1.2544.8.3.1.4 | ColumnosaTwampResponderSessionAgingTimeout | read-only | current | After a Session goes into IDLE state this timer with this timeout is started and on expiry the Session will terminate. This time is specified in seconds. |
| 1.3.6.1.4.1.2544.8.3.1.5 | ColumnosaTwampResponderSessionVlanTag | read-only | current | This is the outer VLAN ID of the received TWAMP test packets. |
| 1.3.6.1.4.1.2544.8.3.1.6 | ColumnosaTwampResponderSessionSourceIpAddress | read-only | current | IPv4/IPv6 Address of the local Responder interface. |
| 1.3.6.1.4.1.2544.8.3.1.7 | ColumnosaTwampResponderSessionRemoteClientIpAddress | read-only | current | IPv4/IPv6 Address of the remote client sender. |
| 1.3.6.1.4.1.2544.8.3.1.8 | ColumnosaTwampResponderSessionSourceUdpPort | read-only | current | This is the UDP Port of the local Responder. |
| 1.3.6.1.4.1.2544.8.3.1.9 | ColumnosaTwampResponderSessionRemoteClientUdpPort | read-only | current | This is the UDP Port of the remote client. This UDP port is used by the TWAMP sender as the source udp port |
| 1.3.6.1.4.1.2544.8.3.1.10 | ColumnosaTwampResponderSessionSequenceNumber | read-only | current | Sequence number is the sequence number of the test packet according to its transmit order. |
| 1.3.6.1.4.1.2544.8.3.1.11 | ColumnosaTwampResponderSessionState | read-only | current | This is the state describing the session status |
| 1.3.6.1.4.1.2544.8.100 | NodeosaTwampConformance | |||
| 1.3.6.1.4.1.2544.8.100.1 | NodeosaTwampMIBCompliances | |||
| 1.3.6.1.4.1.2544.8.100.1.1 | ComplianceosaTwampMIBCompliance | current | The core compliance statement for all the implementations. | |
| 1.3.6.1.4.1.2544.8.100.2 | NodeosaTwampMIBGroups | |||
| 1.3.6.1.4.1.2544.8.100.2.1 | GrouposaTwampMandatoryGroup | current | . | |
| 1.3.6.1.4.1.2544.8.100.2.2 | GrouposaTwampNotificationGroup | current | The notification which are required to be supported by implementations of this MIB. |