MIB Viewer

OSPFV3-MIB

239 objects
The MIB module for OSPF version 3. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5643; see the RFC itself for full legal notices.
Imported Objects
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress InetAddressIPv6 InetAddressPrefixLength InetAddressType
OSPF-MIBBigMetric DesignatedRouterPriority HelloRange Metric Status
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.2.1.191Identityospfv3MIBThe MIB module for OSPF version 3. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use…
1.3.6.1.2.1.191.0Nodeospfv3Notifications
1.3.6.1.2.1.191.0.1Notificationospfv3VirtIfStateChangecurrentAn ospfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be generat…
1.3.6.1.2.1.191.0.2Notificationospfv3NbrStateChangecurrentAn ospfv3NbrStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 neighbor. This notification should be generate…
1.3.6.1.2.1.191.0.3Notificationospfv3VirtNbrStateChangecurrentAn ospfv3VirtNbrStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This notification should be generat…
1.3.6.1.2.1.191.0.4Notificationospfv3IfConfigErrorcurrentAn ospfv3IfConfigError notification signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict …
1.3.6.1.2.1.191.0.5Notificationospfv3VirtIfConfigErrorcurrentAn ospfv3VirtIfConfigError notification signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict …
1.3.6.1.2.1.191.0.6Notificationospfv3IfRxBadPacketcurrentAn ospfv3IfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
1.3.6.1.2.1.191.0.7Notificationospfv3VirtIfRxBadPacketcurrentAn ospfv3VirtIfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a virtual interface.
1.3.6.1.2.1.191.0.8Notificationospfv3LsdbOverflowcurrentAn ospfv3LsdbOverflow notification signifies that the number of LSAs in the router's link state database has exceeded ospfv3ExtAreaLsdbLimit.
1.3.6.1.2.1.191.0.9Notificationospfv3LsdbApproachingOverflowcurrentAn ospfv3LsdbApproachingOverflow notification signifies that the number of LSAs in the router's link state database has exceeded ninety percent of ospfv3ExtAre…
1.3.6.1.2.1.191.0.10Notificationospfv3IfStateChangecurrentAn ospfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This notification should be generate…
1.3.6.1.2.1.191.0.11Notificationospfv3NssaTranslatorStatusChangecurrentAn ospfv3NssaTranslatorStatusChange notification indicates that there has been a change in the router's ability to translate OSPFv3 NSSA LSAs into OSPFv3 Exter…
1.3.6.1.2.1.191.0.12Notificationospfv3RestartStatusChangecurrentAn ospfv3RestartStatusChange notification signifies that there has been a change in the graceful restart state for the router. This notification should be gene…
1.3.6.1.2.1.191.0.13Notificationospfv3NbrRestartHelperStatusChangecurrentAn ospfv3NbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the neighbor. This notificat…
1.3.6.1.2.1.191.0.14Notificationospfv3VirtNbrRestartHelperStatusChangecurrentAn ospfv3VirtNbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the virtual neighbor. Th…
1.3.6.1.2.1.191.1Nodeospfv3Objects
1.3.6.1.2.1.191.1.1Nodeospfv3GeneralGroup
1.3.6.1.2.1.191.1.1.1Scalarospfv3RouterIdread-writecurrentA 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the 32-bit unsigned integer repre…
1.3.6.1.2.1.191.1.1.2Scalarospfv3AdminStatusread-writecurrentThe administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables…
1.3.6.1.2.1.191.1.1.3Scalarospfv3VersionNumberread-onlycurrentThe version number of OSPF for IPv6 is 3.
1.3.6.1.2.1.191.1.1.4Scalarospfv3AreaBdrRtrStatusread-onlycurrentA flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area border router.
1.3.6.1.2.1.191.1.1.5Scalarospfv3ASBdrRtrStatusread-writecurrentA flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when written, the entity SHOULD save the…
1.3.6.1.2.1.191.1.1.6Scalarospfv3AsScopeLsaCountread-onlycurrentThe number of AS-scope (e.g., AS-External) link state advertisements in the link state database.
1.3.6.1.2.1.191.1.1.7Scalarospfv3AsScopeLsaCksumSumread-onlycurrentThe 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine …
1.3.6.1.2.1.191.1.1.8Scalarospfv3OriginateNewLsasread-onlycurrentThe number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in…
1.3.6.1.2.1.191.1.1.9Scalarospfv3RxNewLsasread-onlycurrentThe number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-origin…
1.3.6.1.2.1.191.1.1.10Scalarospfv3ExtLsaCountread-onlycurrentThe number of External (LS type 0x4005) in the link state database.
1.3.6.1.2.1.191.1.1.11Scalarospfv3ExtAreaLsdbLimitread-writecurrentThe maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit. When the n…
1.3.6.1.2.1.191.1.1.12Scalarospfv3ExitOverflowIntervalread-writecurrentThe number of seconds that, after entering Overflow state, a router will attempt to leave Overflow state. This allows the router to again originate non-default…
1.3.6.1.2.1.191.1.1.13Scalarospfv3DemandExtensionsread-writecurrentThe router's support for demand circuits. The value of this object is true (1) when demand circuits are supported. This object is persistent, and when written,…
1.3.6.1.2.1.191.1.1.14Scalarospfv3ReferenceBandwidthread-writecurrentReference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, …
1.3.6.1.2.1.191.1.1.15Scalarospfv3RestartSupportread-writecurrentThe router's support for OSPF graceful restart. Options include no restart support, only planned restarts, or both planned and unplanned restarts. This object …
1.3.6.1.2.1.191.1.1.16Scalarospfv3RestartIntervalread-writecurrentConfigured OSPF graceful restart timeout interval. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
1.3.6.1.2.1.191.1.1.17Scalarospfv3RestartStrictLsaCheckingread-writecurrentIndicates if strict LSA checking is enabled for graceful restart. A value of true (1) indicates that strict LSA checking is enabled. This object is persistent,…
1.3.6.1.2.1.191.1.1.18Scalarospfv3RestartStatusread-onlycurrentThe current status of OSPF graceful restart capability.
1.3.6.1.2.1.191.1.1.19Scalarospfv3RestartAgeread-onlycurrentRemaining time in the current OSPF graceful restart interval.
1.3.6.1.2.1.191.1.1.20Scalarospfv3RestartExitReasonread-onlycurrentDescribes the outcome of the last attempt at a graceful restart. none: no restart has yet been attempted. inProgress: a restart attempt is currently underway. …
1.3.6.1.2.1.191.1.1.21Scalarospfv3NotificationEnableread-writecurrentThis object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), then it enables the generation o…
1.3.6.1.2.1.191.1.1.22Scalarospfv3StubRouterSupportread-onlycurrentThe router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supported.
1.3.6.1.2.1.191.1.1.23Scalarospfv3StubRouterAdvertisementread-writecurrentThis object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement of standard LSAs and is the de…
1.3.6.1.2.1.191.1.1.24Scalarospfv3DiscontinuityTimeread-onlycurrentThe value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred s…
1.3.6.1.2.1.191.1.1.25Scalarospfv3RestartTimeread-onlycurrentThe value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated.
1.3.6.1.2.1.191.1.2Tableospfv3AreaTablenot-accessiblecurrentInformation describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as p…
1.3.6.1.2.1.191.1.2.1Rowospfv3AreaEntrynot-accessiblecurrentInformation describing the configured parameters and cumulative statistics of one of the router's attached areas. The information in this table is persistent, …
1.3.6.1.2.1.191.1.2.1.1Columnospfv3AreaIdnot-accessiblecurrentA 32-bit unsigned integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.
1.3.6.1.2.1.191.1.2.1.2Columnospfv3AreaImportAsExternread-createcurrentIndicates whether an area is a stub area, NSSA, or standard area. AS-scope LSAs are not imported into stub areas or NSSAs. NSSAs import AS-External data as NSS…
1.3.6.1.2.1.191.1.2.1.3Columnospfv3AreaSpfRunsread-onlycurrentThe number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorith…
1.3.6.1.2.1.191.1.2.1.4Columnospfv3AreaBdrRtrCountread-onlycurrentThe total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First (SPF) pass.
1.3.6.1.2.1.191.1.2.1.5Columnospfv3AreaAsBdrRtrCountread-onlycurrentThe total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF pass.
1.3.6.1.2.1.191.1.2.1.6Columnospfv3AreaScopeLsaCountread-onlycurrentThe total number of Area-scope link state advertisements in this area's link state database.
1.3.6.1.2.1.191.1.2.1.7Columnospfv3AreaScopeLsaCksumSumread-onlycurrentThe 32-bit unsigned sum of the Area-scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determin…
1.3.6.1.2.1.191.1.2.1.8Columnospfv3AreaSummaryread-createcurrentThe variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the ro…
1.3.6.1.2.1.191.1.2.1.9Columnospfv3AreaRowStatusread-createcurrentThis object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect…
1.3.6.1.2.1.191.1.2.1.10Columnospfv3AreaStubMetricread-createcurrentThe metric value advertised for the default route into stub and NSSA areas. By default, this equals the least metric among the interfaces to other areas.
1.3.6.1.2.1.191.1.2.1.11Columnospfv3AreaNssaTranslatorRoleread-createcurrentIndicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs.
1.3.6.1.2.1.191.1.2.1.12Columnospfv3AreaNssaTranslatorStateread-onlycurrentIndicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA bo…
1.3.6.1.2.1.191.1.2.1.13Columnospfv3AreaNssaTranslatorStabIntervalread-createcurrentThe stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to p…
1.3.6.1.2.1.191.1.2.1.14Columnospfv3AreaNssaTranslatorEventsread-onlycurrentIndicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this…
1.3.6.1.2.1.191.1.2.1.15Columnospfv3AreaStubMetricTyperead-createcurrentThis variable assigns the type of metric advertised as a default route.
1.3.6.1.2.1.191.1.2.1.16Columnospfv3AreaTEEnabledread-createcurrentIndicates whether or not traffic engineering is enabled in the area. The object is set to the value true (1) to enable traffic engineering. Traffic engineering…
1.3.6.1.2.1.191.1.3Tableospfv3AsLsdbTablenot-accessiblecurrentThe OSPFv3 Process's AS-scope link state database (LSDB). The LSDB contains the AS-scope link state advertisements from throughout the areas that the device is…
1.3.6.1.2.1.191.1.3.1Rowospfv3AsLsdbEntrynot-accessiblecurrentA single AS-scope link state advertisement.
1.3.6.1.2.1.191.1.3.1.1Columnospfv3AsLsdbTypenot-accessiblecurrentThe type of the link state advertisement. Each link state type has a separate advertisement format. AS-scope LSAs not recognized by the router may be stored in…
1.3.6.1.2.1.191.1.3.1.2Columnospfv3AsLsdbRouterIdnot-accessiblecurrentThe 32-bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.2.1.191.1.3.1.3Columnospfv3AsLsdbLsidnot-accessiblecurrentThe Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv…
1.3.6.1.2.1.191.1.3.1.4Columnospfv3AsLsdbSequenceread-onlycurrentThe sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear…
1.3.6.1.2.1.191.1.3.1.5Columnospfv3AsLsdbAgeread-onlycurrentThis field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman…
1.3.6.1.2.1.191.1.3.1.6Columnospfv3AsLsdbChecksumread-onlycurrentThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can…
1.3.6.1.2.1.191.1.3.1.7Columnospfv3AsLsdbAdvertisementread-onlycurrentThe entire link state advertisement, including its header.
1.3.6.1.2.1.191.1.3.1.8Columnospfv3AsLsdbTypeKnownread-onlycurrentThe value true (1) indicates that the LSA type is recognized by this router.
1.3.6.1.2.1.191.1.4Tableospfv3AreaLsdbTablenot-accessiblecurrentThe OSPFv3 Process's Area-scope LSDB. The LSDB contains the Area-scope link state advertisements from throughout the area that the device is attached to.
1.3.6.1.2.1.191.1.4.1Rowospfv3AreaLsdbEntrynot-accessiblecurrentA single Area-scope link state advertisement.
1.3.6.1.2.1.191.1.4.1.1Columnospfv3AreaLsdbAreaIdnot-accessiblecurrentThe 32-bit identifier of the Area from which the LSA was received.
1.3.6.1.2.1.191.1.4.1.2Columnospfv3AreaLsdbTypenot-accessiblecurrentThe type of the link state advertisement. Each link state type has a separate advertisement format. Area-scope LSAs unrecognized by the router are also stored …
1.3.6.1.2.1.191.1.4.1.3Columnospfv3AreaLsdbRouterIdnot-accessiblecurrentThe 32-bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.2.1.191.1.4.1.4Columnospfv3AreaLsdbLsidnot-accessiblecurrentThe Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv…
1.3.6.1.2.1.191.1.4.1.5Columnospfv3AreaLsdbSequenceread-onlycurrentThe sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear…
1.3.6.1.2.1.191.1.4.1.6Columnospfv3AreaLsdbAgeread-onlycurrentThis field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman…
1.3.6.1.2.1.191.1.4.1.7Columnospfv3AreaLsdbChecksumread-onlycurrentThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can…
1.3.6.1.2.1.191.1.4.1.8Columnospfv3AreaLsdbAdvertisementread-onlycurrentThe entire link state advertisement, including its header.
1.3.6.1.2.1.191.1.4.1.9Columnospfv3AreaLsdbTypeKnownread-onlycurrentThe value true (1) indicates that the LSA type is recognized by this router.
1.3.6.1.2.1.191.1.5Tableospfv3LinkLsdbTablenot-accessiblecurrentThe OSPFv3 Process's Link-scope LSDB for non-virtual interfaces. The LSDB contains the Link-scope link state advertisements from the interfaces that the device…
1.3.6.1.2.1.191.1.5.1Rowospfv3LinkLsdbEntrynot-accessiblecurrentA single Link-scope link state advertisement.
1.3.6.1.2.1.191.1.5.1.1Columnospfv3LinkLsdbIfIndexnot-accessiblecurrentThe identifier of the link from which the LSA was received.
1.3.6.1.2.1.191.1.5.1.2Columnospfv3LinkLsdbIfInstIdnot-accessiblecurrentThe identifier of the interface instance from which the LSA was received.
1.3.6.1.2.1.191.1.5.1.3Columnospfv3LinkLsdbTypenot-accessiblecurrentThe type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored …
1.3.6.1.2.1.191.1.5.1.4Columnospfv3LinkLsdbRouterIdnot-accessiblecurrentThe 32-bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.2.1.191.1.5.1.5Columnospfv3LinkLsdbLsidnot-accessiblecurrentThe Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv…
1.3.6.1.2.1.191.1.5.1.6Columnospfv3LinkLsdbSequenceread-onlycurrentThe sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear…
1.3.6.1.2.1.191.1.5.1.7Columnospfv3LinkLsdbAgeread-onlycurrentThis field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman…
1.3.6.1.2.1.191.1.5.1.8Columnospfv3LinkLsdbChecksumread-onlycurrentThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can…
1.3.6.1.2.1.191.1.5.1.9Columnospfv3LinkLsdbAdvertisementread-onlycurrentThe entire link state advertisement, including its header.
1.3.6.1.2.1.191.1.5.1.10Columnospfv3LinkLsdbTypeKnownread-onlycurrentThe value true (1) indicates that the LSA type is recognized by this router.
1.3.6.1.2.1.191.1.6Tableospfv3HostTablenot-accessiblecurrentThe Host/Metric Table indicates what hosts are directly attached to the router and their corresponding metrics.
1.3.6.1.2.1.191.1.6.1Rowospfv3HostEntrynot-accessiblecurrentA metric to be advertised when a given host is reachable. The information in this table is persistent, and when written, the entity SHOULD save the change to n…
1.3.6.1.2.1.191.1.6.1.1Columnospfv3HostAddressTypenot-accessiblecurrentThe address type of ospfv3HostAddress. Only IPv6 global address type is expected.
1.3.6.1.2.1.191.1.6.1.2Columnospfv3HostAddressnot-accessiblecurrentThe IPv6 address of the host. Must be an IPv6 global address.
1.3.6.1.2.1.191.1.6.1.3Columnospfv3HostMetricread-createcurrentThe metric to be advertised.
1.3.6.1.2.1.191.1.6.1.4Columnospfv3HostRowStatusread-createcurrentThis object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect…
1.3.6.1.2.1.191.1.6.1.5Columnospfv3HostAreaIDread-createcurrentThe Area the host entry is to be found within. By default, the area for the subsuming OSPFv3 interface, or Area 0 if there is no subsuming interface.
1.3.6.1.2.1.191.1.7Tableospfv3IfTablenot-accessiblecurrentThe OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3.
1.3.6.1.2.1.191.1.7.1Rowospfv3IfEntrynot-accessiblecurrentThe OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3. The information in this table is persistent, and when written, the entity SHOU…
1.3.6.1.2.1.191.1.7.1.1Columnospfv3IfIndexnot-accessiblecurrentThe interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
1.3.6.1.2.1.191.1.7.1.2Columnospfv3IfInstIdnot-accessiblecurrentEnables multiple interface instances of OSPFv3 to be run over a single link. Each interface instance would be assigned a separate ID. This ID has local link si…
1.3.6.1.2.1.191.1.7.1.3Columnospfv3IfAreaIdread-createcurrentA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.
1.3.6.1.2.1.191.1.7.1.4Columnospfv3IfTyperead-createcurrentThe OSPFv3 interface type.
1.3.6.1.2.1.191.1.7.1.5Columnospfv3IfAdminStatusread-createcurrentThe OSPFv3 interface's administrative status. The value formed on the interface; the interface will be advertised as an internal route to some area. The value …
1.3.6.1.2.1.191.1.7.1.6Columnospfv3IfRtrPriorityread-createcurrentThe priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the r…
1.3.6.1.2.1.191.1.7.1.7Columnospfv3IfTransitDelayread-createcurrentThe estimated number of seconds it takes to transmit a Link State Update packet over this interface. LSAs contained in the update packet must have their age in…
1.3.6.1.2.1.191.1.7.1.8Columnospfv3IfRetransIntervalread-createcurrentThe number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting…
1.3.6.1.2.1.191.1.7.1.9Columnospfv3IfHelloIntervalread-createcurrentThe length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com…
1.3.6.1.2.1.191.1.7.1.10Columnospfv3IfRtrDeadIntervalread-createcurrentThe number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multi…
1.3.6.1.2.1.191.1.7.1.11Columnospfv3IfPollIntervalread-createcurrentThe larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor.
1.3.6.1.2.1.191.1.7.1.12Columnospfv3IfStateread-onlycurrentThe OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface ma…
1.3.6.1.2.1.191.1.7.1.13Columnospfv3IfDesignatedRouterread-onlycurrentThe Router ID of the Designated Router.
1.3.6.1.2.1.191.1.7.1.14Columnospfv3IfBackupDesignatedRouterread-onlycurrentThe Router ID of the Backup Designated Router.
1.3.6.1.2.1.191.1.7.1.15Columnospfv3IfEventsread-onlycurrentThe number of times this OSPFv3 interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initiali…
1.3.6.1.2.1.191.1.7.1.16Columnospfv3IfRowStatusread-createcurrentThis object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect…
1.3.6.1.2.1.191.1.7.1.17Columnospfv3IfDemandread-createcurrentIndicates whether Demand OSPFv3 procedures (Hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this i…
1.3.6.1.2.1.191.1.7.1.18Columnospfv3IfMetricValueread-createcurrentThe metric assigned to this interface. The default value of the metric is 'Reference Bandwidth / ifSpeed'. The value of the reference bandwidth can be set in t…
1.3.6.1.2.1.191.1.7.1.19Columnospfv3IfLinkScopeLsaCountread-onlycurrentThe total number of Link-scope link state advertisements in this link's link state database.
1.3.6.1.2.1.191.1.7.1.20Columnospfv3IfLinkLsaCksumSumread-onlycurrentThe 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determin…
1.3.6.1.2.1.191.1.7.1.21Columnospfv3IfDemandNbrProberead-createcurrentIndicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
1.3.6.1.2.1.191.1.7.1.22Columnospfv3IfDemandNbrProbeRetransLimitread-createcurrentThe number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
1.3.6.1.2.1.191.1.7.1.23Columnospfv3IfDemandNbrProbeIntervalread-createcurrentDefines how often the neighbor will be probed.
1.3.6.1.2.1.191.1.7.1.24Columnospfv3IfTEDisabledread-createcurrentIndicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The …
1.3.6.1.2.1.191.1.7.1.25Columnospfv3IfLinkLSASuppressionread-createcurrentSpecifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the originat…
1.3.6.1.2.1.191.1.8Tableospfv3VirtIfTablenot-accessiblecurrentInformation about this router's virtual interfaces that the OSPFv3 Process is configured to carry on.
1.3.6.1.2.1.191.1.8.1Rowospfv3VirtIfEntrynot-accessiblecurrentInformation about a single virtual interface. The information in this table is persistent, and when written, the entity SHOULD save the change to non-volatile …
1.3.6.1.2.1.191.1.8.1.1Columnospfv3VirtIfAreaIdnot-accessiblecurrentThe transit area that the virtual link traverses. By definition, this is not Area 0.
1.3.6.1.2.1.191.1.8.1.2Columnospfv3VirtIfNeighbornot-accessiblecurrentThe Router ID of the virtual neighbor.
1.3.6.1.2.1.191.1.8.1.3Columnospfv3VirtIfIndexread-onlycurrentThe local interface index assigned by the OSPFv3 Process to this OSPFv3 virtual interface. It is advertised in Hellos sent over the virtual link and in the rou…
1.3.6.1.2.1.191.1.8.1.4Columnospfv3VirtIfInstIdread-onlycurrentThe local Interface Instance ID assigned by the OSPFv3 Process to this OSPFv3 virtual interface.
1.3.6.1.2.1.191.1.8.1.5Columnospfv3VirtIfTransitDelayread-createcurrentThe estimated number of seconds it takes to transmit a Link State Update packet over this interface.
1.3.6.1.2.1.191.1.8.1.6Columnospfv3VirtIfRetransIntervalread-createcurrentThe number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting…
1.3.6.1.2.1.191.1.8.1.7Columnospfv3VirtIfHelloIntervalread-createcurrentThe length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
1.3.6.1.2.1.191.1.8.1.8Columnospfv3VirtIfRtrDeadIntervalread-createcurrentThe number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello …
1.3.6.1.2.1.191.1.8.1.9Columnospfv3VirtIfStateread-onlycurrentOSPF virtual interface states. The same encoding as the ospfV3IfTable is used.
1.3.6.1.2.1.191.1.8.1.10Columnospfv3VirtIfEventsread-onlycurrentThe number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management…
1.3.6.1.2.1.191.1.8.1.11Columnospfv3VirtIfRowStatusread-createcurrentThis object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect…
1.3.6.1.2.1.191.1.8.1.12Columnospfv3VirtIfLinkScopeLsaCountread-onlycurrentThe total number of Link-scope link state advertisements in this virtual link's link state database.
1.3.6.1.2.1.191.1.8.1.13Columnospfv3VirtIfLinkLsaCksumSumread-onlycurrentThe 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this virtual link's link state database. The sum can be used to …
1.3.6.1.2.1.191.1.9Tableospfv3NbrTablenot-accessiblecurrentA table describing all neighbors in the locality of the OSPFv3 router.
1.3.6.1.2.1.191.1.9.1Rowospfv3NbrEntrynot-accessiblecurrentThe information regarding a single neighbor.
1.3.6.1.2.1.191.1.9.1.1Columnospfv3NbrIfIndexnot-accessiblecurrentThe Local Link ID of the link over which the neighbor can be reached.
1.3.6.1.2.1.191.1.9.1.2Columnospfv3NbrIfInstIdnot-accessiblecurrentInterface instance over which the neighbor can be reached. This ID has local link significance only.
1.3.6.1.2.1.191.1.9.1.3Columnospfv3NbrRtrIdnot-accessiblecurrentA 32-bit unsigned integer uniquely identifying the neighboring router in the Autonomous System.
1.3.6.1.2.1.191.1.9.1.4Columnospfv3NbrAddressTyperead-onlycurrentThe address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
1.3.6.1.2.1.191.1.9.1.5Columnospfv3NbrAddressread-onlycurrentThe IPv6 address of the neighbor associated with the local link.
1.3.6.1.2.1.191.1.9.1.6Columnospfv3NbrOptionsread-onlycurrentA bit mask corresponding to the neighbor's options field.
1.3.6.1.2.1.191.1.9.1.7Columnospfv3NbrPriorityread-onlycurrentThe priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Ro…
1.3.6.1.2.1.191.1.9.1.8Columnospfv3NbrStateread-onlycurrentThe state of the relationship with this neighbor.
1.3.6.1.2.1.191.1.9.1.9Columnospfv3NbrEventsread-onlycurrentThe number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initial…
1.3.6.1.2.1.191.1.9.1.10Columnospfv3NbrLsRetransQLenread-onlycurrentThe current length of the retransmission queue.
1.3.6.1.2.1.191.1.9.1.11Columnospfv3NbrHelloSuppressedread-onlycurrentIndicates whether Hellos are being suppressed to the neighbor.
1.3.6.1.2.1.191.1.9.1.12Columnospfv3NbrIfIdread-onlycurrentThe Interface ID that the neighbor advertises in its Hello packets on this link, that is, the neighbor's local interface index.
1.3.6.1.2.1.191.1.9.1.13Columnospfv3NbrRestartHelperStatusread-onlycurrentIndicates whether the router is acting as a graceful restart helper for the neighbor.
1.3.6.1.2.1.191.1.9.1.14Columnospfv3NbrRestartHelperAgeread-onlycurrentRemaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
1.3.6.1.2.1.191.1.9.1.15Columnospfv3NbrRestartHelperExitReasonread-onlycurrentDescribes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a resta…
1.3.6.1.2.1.191.1.10Tableospfv3CfgNbrTablenot-accessiblecurrentA table describing all configured neighbors. The Configured Neighbors table just gives OSPFv3 information for sending OSPFv3 packets to potential neighbors and…
1.3.6.1.2.1.191.1.10.1Rowospfv3CfgNbrEntrynot-accessiblecurrentThe information regarding a single configured neighbor. The information in this table is persistent, and when written, the entity SHOULD save the change to non…
1.3.6.1.2.1.191.1.10.1.1Columnospfv3CfgNbrIfIndexnot-accessiblecurrentThe Local Link ID of the link over which the neighbor can be reached.
1.3.6.1.2.1.191.1.10.1.2Columnospfv3CfgNbrIfInstIdnot-accessiblecurrentInterface instance over which the neighbor can be reached. This ID has local link significance only.
1.3.6.1.2.1.191.1.10.1.3Columnospfv3CfgNbrAddressTypenot-accessiblecurrentThe address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
1.3.6.1.2.1.191.1.10.1.4Columnospfv3CfgNbrAddressnot-accessiblecurrentThe IPv6 address of the neighbor associated with the local link.
1.3.6.1.2.1.191.1.10.1.5Columnospfv3CfgNbrPriorityread-createcurrentThe priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Ro…
1.3.6.1.2.1.191.1.10.1.6Columnospfv3CfgNbrRowStatusread-createcurrentThis object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect…
1.3.6.1.2.1.191.1.11Tableospfv3VirtNbrTablenot-accessiblecurrentA table describing all virtual neighbors.
1.3.6.1.2.1.191.1.11.1Rowospfv3VirtNbrEntrynot-accessiblecurrentVirtual neighbor information.
1.3.6.1.2.1.191.1.11.1.1Columnospfv3VirtNbrAreanot-accessiblecurrentThe transit area Identifier.
1.3.6.1.2.1.191.1.11.1.2Columnospfv3VirtNbrRtrIdnot-accessiblecurrentA 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
1.3.6.1.2.1.191.1.11.1.3Columnospfv3VirtNbrIfIndexread-onlycurrentThe local Interface ID for the virtual link over which the neighbor can be reached.
1.3.6.1.2.1.191.1.11.1.4Columnospfv3VirtNbrIfInstIdread-onlycurrentThe interface instance for the virtual link over which the neighbor can be reached.
1.3.6.1.2.1.191.1.11.1.5Columnospfv3VirtNbrAddressTyperead-onlycurrentThe address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.
1.3.6.1.2.1.191.1.11.1.6Columnospfv3VirtNbrAddressread-onlycurrentThe IPv6 address advertised by this virtual neighbor. It must be a global scope address.
1.3.6.1.2.1.191.1.11.1.7Columnospfv3VirtNbrOptionsread-onlycurrentA bit mask corresponding to the neighbor's options field.
1.3.6.1.2.1.191.1.11.1.8Columnospfv3VirtNbrStateread-onlycurrentThe state of the virtual neighbor relationship.
1.3.6.1.2.1.191.1.11.1.9Columnospfv3VirtNbrEventsread-onlycurrentThe number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializati…
1.3.6.1.2.1.191.1.11.1.10Columnospfv3VirtNbrLsRetransQLenread-onlycurrentThe current length of the retransmission queue.
1.3.6.1.2.1.191.1.11.1.11Columnospfv3VirtNbrHelloSuppressedread-onlycurrentIndicates whether Hellos are being suppressed to the neighbor.
1.3.6.1.2.1.191.1.11.1.12Columnospfv3VirtNbrIfIdread-onlycurrentThe Interface ID that the neighbor advertises in its Hello packets on this virtual link, that is, the neighbor's local Interface ID.
1.3.6.1.2.1.191.1.11.1.13Columnospfv3VirtNbrRestartHelperStatusread-onlycurrentIndicates whether the router is acting as a graceful restart helper for the neighbor.
1.3.6.1.2.1.191.1.11.1.14Columnospfv3VirtNbrRestartHelperAgeread-onlycurrentRemaining time in the current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
1.3.6.1.2.1.191.1.11.1.15Columnospfv3VirtNbrRestartHelperExitReasonread-onlycurrentDescribes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a resta…
1.3.6.1.2.1.191.1.12Tableospfv3AreaAggregateTablenot-accessiblecurrentThe Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its pur…
1.3.6.1.2.1.191.1.12.1Rowospfv3AreaAggregateEntrynot-accessiblecurrentA single area aggregate entry. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile stor…
1.3.6.1.2.1.191.1.12.1.1Columnospfv3AreaAggregateAreaIDnot-accessiblecurrentThe area the Address Aggregate is to be found within.
1.3.6.1.2.1.191.1.12.1.2Columnospfv3AreaAggregateAreaLsdbTypenot-accessiblecurrentThe type of the Address Aggregate. This field specifies the Area LSDB type that this Address Aggregate applies to.
1.3.6.1.2.1.191.1.12.1.3Columnospfv3AreaAggregatePrefixTypenot-accessiblecurrentThe prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected.
1.3.6.1.2.1.191.1.12.1.4Columnospfv3AreaAggregatePrefixnot-accessiblecurrentThe IPv6 prefix.
1.3.6.1.2.1.191.1.12.1.5Columnospfv3AreaAggregatePrefixLengthnot-accessiblecurrentThe length of the prefix (in bits). A prefix can not be shorter than 3 bits.
1.3.6.1.2.1.191.1.12.1.6Columnospfv3AreaAggregateRowStatusread-createcurrentThis object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect…
1.3.6.1.2.1.191.1.12.1.7Columnospfv3AreaAggregateEffectread-createcurrentPrefixes subsumed by ranges will either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the prefix not being advertised a…
1.3.6.1.2.1.191.1.12.1.8Columnospfv3AreaAggregateRouteTagread-createcurrentThis tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSAs to AS-External-LSAs.
1.3.6.1.2.1.191.1.13Tableospfv3VirtLinkLsdbTablenot-accessiblecurrentThe OSPFv3 Process's Link-scope LSDB for virtual interfaces. The LSDB contains the Link-scope link state advertisements from virtual interfaces.
1.3.6.1.2.1.191.1.13.1Rowospfv3VirtLinkLsdbEntrynot-accessiblecurrentA single Link-scope link state advertisement for a virtual interface.
1.3.6.1.2.1.191.1.13.1.1Columnospfv3VirtLinkLsdbIfAreaIdnot-accessiblecurrentThe transit area that the virtual link traverses. By definition, this is not Area 0.
1.3.6.1.2.1.191.1.13.1.2Columnospfv3VirtLinkLsdbIfNeighbornot-accessiblecurrentThe Router ID of the virtual neighbor.
1.3.6.1.2.1.191.1.13.1.3Columnospfv3VirtLinkLsdbTypenot-accessiblecurrentThe type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored …
1.3.6.1.2.1.191.1.13.1.4Columnospfv3VirtLinkLsdbRouterIdnot-accessiblecurrentThe 32-bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.2.1.191.1.13.1.5Columnospfv3VirtLinkLsdbLsidnot-accessiblecurrentThe Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv…
1.3.6.1.2.1.191.1.13.1.6Columnospfv3VirtLinkLsdbSequenceread-onlycurrentThe sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear…
1.3.6.1.2.1.191.1.13.1.7Columnospfv3VirtLinkLsdbAgeread-onlycurrentThis field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman…
1.3.6.1.2.1.191.1.13.1.8Columnospfv3VirtLinkLsdbChecksumread-onlycurrentThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can…
1.3.6.1.2.1.191.1.13.1.9Columnospfv3VirtLinkLsdbAdvertisementread-onlycurrentThe entire link state advertisement, including its header.
1.3.6.1.2.1.191.1.13.1.10Columnospfv3VirtLinkLsdbTypeKnownread-onlycurrentThe value true (1) indicates that the LSA type is recognized by this router.
1.3.6.1.2.1.191.1.14Nodeospfv3NotificationEntry
1.3.6.1.2.1.191.1.14.1Scalarospfv3ConfigErrorTypeaccessible-for-notifycurrentPotential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications.
1.3.6.1.2.1.191.1.14.2Scalarospfv3PacketTypeaccessible-for-notifycurrentOSPFv3 packet types.
1.3.6.1.2.1.191.1.14.3Scalarospfv3PacketSrcaccessible-for-notifycurrentThe IPv6 address of an inbound packet that cannot be identified by a neighbor instance. Only IPv6 addresses without zone index are expected.
1.3.6.1.2.1.191.2Nodeospfv3Conformance
1.3.6.1.2.1.191.2.1Nodeospfv3Groups
1.3.6.1.2.1.191.2.1.1Groupospfv3BasicGroupcurrentThese objects are used for managing/monitoring OSPFv3 global parameters.
1.3.6.1.2.1.191.2.1.2Groupospfv3AreaGroupcurrentThese objects are used for OSPFv3 systems supporting areas.
1.3.6.1.2.1.191.2.1.3Groupospfv3AsLsdbGroupcurrentThese objects are used for OSPFv3 systems that display their AS-scope link state database.
1.3.6.1.2.1.191.2.1.4Groupospfv3AreaLsdbGroupcurrentThese objects are used for OSPFv3 systems that display their Area-scope link state database.
1.3.6.1.2.1.191.2.1.5Groupospfv3LinkLsdbGroupcurrentThese objects are used for OSPFv3 systems that display their Link-scope link state database for non-virtual interfaces.
1.3.6.1.2.1.191.2.1.6Groupospfv3HostGroupcurrentThese objects are used for OSPFv3 systems that support attached hosts.
1.3.6.1.2.1.191.2.1.7Groupospfv3IfGroupcurrentThese interface objects are used for managing/monitoring OSPFv3 interfaces.
1.3.6.1.2.1.191.2.1.8Groupospfv3VirtIfGroupcurrentThese virtual interface objects are used for managing/monitoring OSPFv3 virtual interfaces.
1.3.6.1.2.1.191.2.1.9Groupospfv3NbrGroupcurrentThese neighbor objects are used for managing/monitoring OSPFv3 neighbors.
1.3.6.1.2.1.191.2.1.10Groupospfv3CfgNbrGroupcurrentThese configured neighbor objects are used for managing/monitoring OSPFv3-configured neighbors.
1.3.6.1.2.1.191.2.1.11Groupospfv3VirtNbrGroupcurrentThese virtual neighbor objects are used for managing/monitoring OSPFv3 virtual neighbors.
1.3.6.1.2.1.191.2.1.12Groupospfv3AreaAggregateGroupcurrentThese area aggregate objects are required for aggregating OSPFv3 prefixes for summarization across areas.
1.3.6.1.2.1.191.2.1.13Groupospfv3VirtLinkLsdbGroupcurrentThese objects are used for OSPFv3 systems that display their Link-scope link state database for virtual interfaces.
1.3.6.1.2.1.191.2.1.14Groupospfv3NotificationObjectGroupcurrentThese objects are used to record notification parameters.
1.3.6.1.2.1.191.2.1.15Groupospfv3NotificationGroupcurrentThis group is used for OSPFv3 notifications.
1.3.6.1.2.1.191.2.2Nodeospfv3Compliances
1.3.6.1.2.1.191.2.2.1Complianceospfv3FullCompliancecurrentThe compliance statement
1.3.6.1.2.1.191.2.2.2Complianceospfv3ReadOnlyComplianceread-onlycurrentWhen this MIB module is implemented without support for read-create (i.e., in read-only mode), the implementation can claim read-only compliance. Such a device…
Type Definitions
NameSyntaxStatusDescription
Ospfv3AreaIdTCUnsigned32 (0..'FFFFFFFF'h)currentAn OSPFv3 Area Identifier. A value of zero identifies the backbone area.
Ospfv3DeadIntervalRangeTCUnsigned32 (1..'FFFF'h)currentThe range, in seconds, of dead interval value.
Ospfv3IfInstIdTCUnsigned32 (0..255)currentAn OSPFv3 Interface Instance ID.
Ospfv3LsaAgeTCUnsigned32 (0..3600 | 32768..36368)currentThe age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.
Ospfv3LsaSequenceTCInteger32currentThe sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent …
Ospfv3LsIdTCUnsigned32 (1..'FFFFFFFF'h)currentA unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics.
Ospfv3RouterIdTCUnsigned32 (1..'FFFFFFFF'h)currentA 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router.
Ospfv3UpToRefreshIntervalTCUnsigned32 (1..1800)currentThe values one might be able to configure for variables bounded by the Refresh Interval.
MIB Viewer