PDN-ATMM4EXT-MIB
62 objects
This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined in the Atm Forums M4 Mib
Imported Objects
| ATM-FORUM-SNMP-M4-MIB | atmfM4TcProtoCurrEntry atmfM4TcProtoHistEntry atmfM4VcTestEntry atmfM4VpTestEntry |
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdnAtm |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.11.6 | IdentitypdnAtmfM4ExtMIB | This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined in the Atm Forums M4 Mib | ||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1 | NodepdnAtmfM4ExtObjects | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1 | TablepdnAtmfM4TcProtoCurrExtTable | not-accessible | current | The Paradyne Extension to the atmfM4TcProtoCurrTable of the ATM-FORUM-SNMP-M4-MIB. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1 | RowpdnAtmfM4TcProtoCurrExtEntry | not-accessible | current | The Paradyne Extension to the atmfM4TcProtoCurrTable of the ATM-FORUM-SNMP-M4-MIB. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.1 | ColumnpdnAtmfM4TcProtoCurrCellIns | read-only | current | The number of ATM cells received on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.2 | ColumnpdnAtmfM4TcProtoCurrCellOuts | read-only | current | The number of ATM cells sent on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.3 | ColumnpdnAtmfM4TcProtoCurrInDiscards | read-only | current | The number of RX ATM cells dropped on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.4 | ColumnpdnAtmfM4TcProtoCurrOutDiscards | read-only | current | The number of TX ATM cells dropped on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.5 | ColumnpdnAtmfM4TcProtoCurrLCDEvents | read-only | current | The number of Loss of Cell Delineation (LCD) event occurred on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.6 | ColumnpdnAtmfM4TcProtoCurrUnknownCells | read-only | current | The number of unknown Cells received on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.7 | ColumnpdnAtmfM4TcProtoCurrCorrectedHEC | read-only | current | The number of Cell with corrected HEC received on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2 | TablepdnAtmfM4TcProtoHistExtTable | not-accessible | current | The Paradyne Extension to the atmfM4TcProtoHistTable of the ATM-FORUM-SNMP-M4-MIB. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1 | RowpdnAtmfM4TcProtoHistExtEntry | not-accessible | current | The Paradyne Extension to the atmfM4TcProtoHistTable of the ATM-FORUM-SNMP-M4-MIB. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.1 | ColumnpdnAtmfM4TcProtoHistCellIns | read-only | current | The number of ATM cells received on this interface during this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.2 | ColumnpdnAtmfM4TcProtoHistCellOuts | read-only | current | The number of ATM cells sent on this interface during this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.3 | ColumnpdnAtmfM4TcProtoHistInDiscards | read-only | current | The number of RX ATM cells dropped on this interface during this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.4 | ColumnpdnAtmfM4TcProtoHistOutDiscards | read-only | current | The number of TX ATM cells dropped on this interface during this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.5 | ColumnpdnAtmfM4TcProtoHistLCDEvents | read-only | current | The number of Loss of Cell Delineation (LCD) event occurred on this interface during this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.6 | ColumnpdnAtmfM4TcProtoHistUnknownCells | read-only | current | The number of unknown Cells received on this interface since the start of this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.7 | ColumnpdnAtmfM4TcProtoHistCorrectedHEC | read-only | current | The number of Cell with corrected HEC received on this interface during this interval |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3 | NodepdnAtmfM4TestTypes | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.1 | IdentitypdnAtmfM4TestOAMLoopbackSegMultiCell | current | This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that… | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.2 | IdentitypdnAtmfM4TestOAMLoopbackE2EMultiCell | current | This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4 | TablepdnAtmfM4VcLoopbackTestTable | not-accessible | current | This table contains input and results for OAM loopback tests. There can be only one test running per ATM VCC This table should be used in conjunction with atmf… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1 | RowpdnAtmfM4VcLoopbackTestEntry | not-accessible | current | An entry containing objects for test results for ATM OAM loopback test |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.1 | ColumnpdnAtmfM4VcLoopbackTestElpsTime | read-only | current | This object contains the time that has elapsed since the test started. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.2 | ColumnpdnAtmfM4VcLoopbackTestCellsSent | read-only | current | This object specifies a count of the number of test cells that have been sent. The value of this object stops increasing when it reaches its maximum value. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.3 | ColumnpdnAtmfM4VcLoopbackTestCellsRcvd | read-only | current | This object specifies a count of the number of test cells that have been received. The value of this object stops increasing when it reaches its maximum value. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.4 | ColumnpdnAtmfM4VcLoopbackTestMinRTDelay | read-only | current | This object contains the value of the shortest round trip delay since the test has been started. It is calculated only on the cells that have been received. Ce… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.5 | ColumnpdnAtmfM4VcLoopbackTestMaxRTDelay | read-only | current | This object contains the value of the longest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cel… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.6 | ColumnpdnAtmfM4VcLoopbackTestAvgRTDelay | read-only | current | This object contains the value of the average round trip delay since the test has been started. It is calculated only on the cells that have been received. Cel… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.7 | ColumnpdnAtmfM4VcLoopbackTestErrorCode | read-only | current | This object contains the specific error code on the test result. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5 | TablepdnAtmfM4Vc1CellLoopTable | not-accessible | current | This table contains input and results for single cell OAM loopback tests. There can be only one test running per ATM VCC This table should be used in conjuncti… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1 | RowpdnAtmfM4Vc1CellLoopEntry | not-accessible | current | An entry containing objects for test results for a single cell ATM OAM loopback test |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.1 | ColumnpdnAtmfM4Vc1CellLoopRTDelay | read-only | current | This object contains the value of the round trip delay of the the test cell. A value of zero indicates that no cell has been received. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.2 | ColumnpdnAtmfM4Vc1CellLoopReportedLocation | read-only | current | This object contains the value of the location identifier reported by the received cell. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.3 | ColumnpdnAtmfM4Vc1CellLoopErrorCode | read-only | current | This object contains the specific error code on the test result. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6 | TablepdnAtmfM4LoopbackLocationTable | not-accessible | current | This table contains the ATM OAM loopback location codes for ATM cell layer interfaces. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1 | RowpdnAtmfM4LoopbackLocationEntry | not-accessible | current | An entry containing objects for ATM OAM loopback locations. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1.1 | ColumnpdnAtmfM4LoopbackLocationCode | read-write | current | This object contains the value of ATM OAM Loopback Location Code |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7 | TablepdnAtmfM4VpLoopbackTestTable | not-accessible | current | This table contains input and results for OAM loopback tests. There can be only one test running per ATM VPC This table should be used in conjunction with atmf… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1 | RowpdnAtmfM4VpLoopbackTestEntry | not-accessible | current | An entry containing objects for test results for ATM OAM loopback test |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.1 | ColumnpdnAtmfM4VpLoopbackTestElpsTime | read-only | current | This object contains the time that has elapsed since the test started. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.2 | ColumnpdnAtmfM4VpLoopbackTestCellsSent | read-only | current | This object specifies a count of the number of test cells that have been sent. The value of this object stops increasing when it reaches its maximum value. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.3 | ColumnpdnAtmfM4VpLoopbackTestCellsRcvd | read-only | current | This object specifies a count of the number of test cells that have been received. The value of this object stops increasing when it reaches its maximum value. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.4 | ColumnpdnAtmfM4VpLoopbackTestMinRTDelay | read-only | current | This object contains the value of the shortest round trip delay since the test has been started. It is calculated only on the cells that have been received. Ce… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.5 | ColumnpdnAtmfM4VpLoopbackTestMaxRTDelay | read-only | current | This object contains the value of the longest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cel… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.6 | ColumnpdnAtmfM4VpLoopbackTestAvgRTDelay | read-only | current | This object contains the value of the average round trip delay since the test has been started. It is calculated only on the cells that have been received. Cel… |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.7 | ColumnpdnAtmfM4VpLoopbackTestErrorCode | read-only | current | This object contains the specific error code on the test result. |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.2 | NodepdnAtmfM4ExtTraps | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.2.0 | NodepdnAtmfM4ExtTrapPrefix | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3 | NodepdnAtmfM4ExtConformance | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1 | NodepdnAtmfM4Groups | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.1 | GrouppdnAtmfM4TcCurrGroup | current | The objects in the ATM TC layer current table. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.2 | GrouppdnAtmfM4TcHistGroup | current | The objects in the ATM TC layer history table. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.3 | GrouppdnAtmfM4VcLoopbackTestGroup | current | The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VCC. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.4 | GrouppdnAtmfM4Vc1CellLoopGroup | current | The objects in the ATM Single Cell OAM Loopback Test table. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.5 | GrouppdnAtmfM4LoopbackLocationGroup | current | The objects in the ATM Loopback Location table. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.6 | GrouppdnAtmfM4VpLoopbackTestGroup | current | The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VPC. | |
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2 | NodepdnAtmfM4Compliances | |||
| 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2.1 | CompliancepdnAtmfM4Compliance | read-only | current | The compliance statement for SNMP entities which support the ATM M4 extensions. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PdnAtmfM4TestErrorCode | INTEGER { noError(0), badIfIndex(1), noVccFound(2), notOwner(3), noResourceAvailable(4), noLoopbackAllocated(5), testCompleted(6), testTimeOut(7), adminStatusDisabled(8) } | current | The specific error codes related to attempting to run a test. The codes have the following meanings: noError(0) badIfIndex(1) noVccFound(2) notOwner(3) noResourceAvailable(4) noLoopbackAllocated(5) testCompleted(6) test… |