PEGASUS-SDH-MIB
65 objects
This MIB applies to the PEGASUS SDSL product manufactured by Schmid Telecom Zurich. The MIB is modelled after the PEM management model, so object hierarchy and individual variables agree with the PEM client. This MIB represents an extension to the DS1-MIB and the SONET-MIB. These three MIB files are used to manage the PEGASUS STM-1 card. The PEGASUS-SDH-MIB contains five tables: - stm1CardTable one entry for each STM-1 card configured. - stm1CardClockTable one entry for each STM-1 card configured. - ethernetIfTable one entry for each Ethernet interface of a configured STM-1 card. - vcTable one entry for each Virtual Container (VC-3/4/12). - tugConfigTable one entry for each Tributary Unit Group (TUG-3). Note - The tables that represent extensions to the DS1-/SINET-MIB use the ifIndex from IF-MIB (ifTable).
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| PEGASUS-MIB | AvailabilityStatusElem CommStateEnum OperStateEnum pegasusMibModule |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6368.2.8 | IdentitypegasusSdhMibModule | This MIB applies to the PEGASUS SDSL product manufactured by Schmid Telecom Zurich. The MIB is modelled after the PEM management model, so object hierarchy and… | ||
| 1.3.6.1.4.1.6368.2.8.1 | Tablestm1CardTable | not-accessible | current | A table containing stm1 card specific information. |
| 1.3.6.1.4.1.6368.2.8.1.1 | Rowstm1CardEntry | not-accessible | current | Row and index definition for stm1 card table. |
| 1.3.6.1.4.1.6368.2.8.1.1.1 | Columnstm1CardSlotNumber | not-accessible | current | Slot number for stm1 card. |
| 1.3.6.1.4.1.6368.2.8.1.1.2 | Columnstm1CardName | read-only | current | Name of the PEGASUS device. |
| 1.3.6.1.4.1.6368.2.8.1.1.3 | Columnstm1CardHardwareVersion | read-only | current | Hardware version of the STM-1 card. This is also called CHM-number (it always starts with the letters 'CHM'). The number '404' after 'CHM' identifies the card … |
| 1.3.6.1.4.1.6368.2.8.1.1.4 | Columnstm1CardFirmwareVersion | read-only | current | Version number and build date of the firmware running on the line card. The format is 'major.minor YYYYMMDD hh:mm'. |
| 1.3.6.1.4.1.6368.2.8.1.1.5 | Columnstm1CardManufacturer | read-only | current | Manufacturer of the STM-1 card. |
| 1.3.6.1.4.1.6368.2.8.1.1.6 | Columnstm1CardSerialNumber | read-only | current | Serial number of the line card. Also called HM-number, as it always starts with 'HM'. Example: HMVSS014810294. |
| 1.3.6.1.4.1.6368.2.8.1.1.7 | Columnstm1CardMultiplexingMode | read-write | current | Selects the SDH multiplexing mode. Either it is STM1-AU3-VC3 or STM1-AU4-VC4. |
| 1.3.6.1.4.1.6368.2.8.1.1.8 | Columnstm1CardJ0TraceMonitoring | read-write | current | If trace monitoring is disable no alarm is propagated to PEM and also no RDI/AIS is inserted. |
| 1.3.6.1.4.1.6368.2.8.1.1.9 | Columnstm1CardJ1TraceMonitoring | read-write | current | If trace monitoring is disable no alarm is propagated to PEM and also no RDI/AIS is inserted. |
| 1.3.6.1.4.1.6368.2.8.1.1.10 | Columnstm1CardJ2TraceMonitoring | read-write | current | If trace monitoring is disable no alarm is propagated to PEM and also no RDI/AIS is inserted. |
| 1.3.6.1.4.1.6368.2.8.1.1.11 | Columnstm1CardJ0PathTraceSize | read-write | current | Size of the Regenerator Section Trace Message. |
| 1.3.6.1.4.1.6368.2.8.1.1.12 | Columnstm1CardJ0PathTraceSend | read-write | current | Configurable Regenerator Section (RS) Trace Message. |
| 1.3.6.1.4.1.6368.2.8.1.1.13 | Columnstm1CardJ0PathTraceExpected | read-write | current | Regenerator Section (RS) Trace Message that should be received. |
| 1.3.6.1.4.1.6368.2.8.1.1.14 | Columnstm1CardJ0PathTraceReceive | read-only | current | Regenerator Section (RS) Trace Message that is be received. |
| 1.3.6.1.4.1.6368.2.8.1.1.15 | Columnstm1CardLaserOperationMode | read-write | current | Configuration of the 'Automatic Laser Shutdown' feature. |
| 1.3.6.1.4.1.6368.2.8.1.1.16 | Columnstm1CardLaserState | read-only | current | Actual state of the laser. |
| 1.3.6.1.4.1.6368.2.8.1.1.17 | Columnstm1CardOperState | read-only | current | The operational state is a status property indicating whether or not a device is physically installed and working. enabled The device is partially or fully ope… |
| 1.3.6.1.4.1.6368.2.8.1.1.18 | Columnstm1CardAvailabilityState | read-only | current | The availability status gives more detailed information about failures within a device. An empty status set means that no error exists. Possible status are: in… |
| 1.3.6.1.4.1.6368.2.8.1.1.19 | Columnstm1CardMgmtCommState | read-only | current | The Management Comm State indicates the state of the management connection between the PEM Server and the STM-1 card. disconnected No connection has been estab… |
| 1.3.6.1.4.1.6368.2.8.1.1.20 | Columnstm1CardPRBSGeneratorSink | read-write | current | Determines, whether the PRBS Generator should be used on the optical or on the E1 links. |
| 1.3.6.1.4.1.6368.2.8.1.1.21 | Columnstm1CardPRBSAnalyzerSource | read-write | current | Determines, whether the PRBS Analyzer should be used on the optical or on the E1 links. |
| 1.3.6.1.4.1.6368.2.8.1.1.22 | Columnstm1CardPRBSPattern | read-write | current | Determines the PRBS Pattern to be used. |
| 1.3.6.1.4.1.6368.2.8.1.1.23 | Columnstm1CardAlarmStatus | read-only | current | This variable indicates the status of STM-1 card, regenerator section and multiplex section. It's a bitmap represented as a sum. Therefore multiple alarms can … |
| 1.3.6.1.4.1.6368.2.8.2 | Tablestm1CardClockTable | not-accessible | current | A table containing stm1 card specific clock information. |
| 1.3.6.1.4.1.6368.2.8.2.1 | Rowstm1CardClockEntry | not-accessible | current | Row and index definition for stm1 card clock table. |
| 1.3.6.1.4.1.6368.2.8.2.1.1 | Columnstm1CardActiveClockSource | read-only | current | Displays which clock sourceis active and used as sync source. |
| 1.3.6.1.4.1.6368.2.8.2.1.2 | Columnstm1CardClockSyncState | read-only | current | Sync status is OK if RX or Reference clock is valid and used as active sync source. |
| 1.3.6.1.4.1.6368.2.8.2.1.3 | Columnstm1CardTxLineClockQuality | read-write | current | This is the clock quality of the outgoing SDH signal. The default sets the outgoing quality to the incoming quality. Sometime it may be useful to set a fix out… |
| 1.3.6.1.4.1.6368.2.8.2.1.4 | Columnstm1CardRxClockMode | read-write | current | If enabled the RX line clock can be used as sync source. |
| 1.3.6.1.4.1.6368.2.8.2.1.5 | Columnstm1CardRxClockPriority | read-write | current | This value has always the opposite value of Reference Clock Priority. |
| 1.3.6.1.4.1.6368.2.8.2.1.6 | Columnstm1CardRxClockQuality | read-only | current | This is the clock quality of the incoming SDH signal. |
| 1.3.6.1.4.1.6368.2.8.2.1.7 | Columnstm1CardRxClockState | read-only | current | Clock status is valid if a good clock can be found on input (clock checker). |
| 1.3.6.1.4.1.6368.2.8.2.1.8 | Columnstm1CardReferenceClockMode | read-write | current | If enabled the Reference clock (V5 card input) can be used as sync source. |
| 1.3.6.1.4.1.6368.2.8.2.1.9 | Columnstm1CardReferenceClockPriority | read-write | current | This value has always the opposite value of Rx Clock Priority. |
| 1.3.6.1.4.1.6368.2.8.2.1.10 | Columnstm1CardReferenceClockQuality | read-write | current | Defines the quality of the reference clock input. This value will be transmitted in SDH-TX if reference clock is used as active sync source. |
| 1.3.6.1.4.1.6368.2.8.2.1.11 | Columnstm1CardReferenceClockState | read-only | current | Clock status is valid if a good clock can be found on input (clock checker). |
| 1.3.6.1.4.1.6368.2.8.3 | TableethernetIfTable | not-accessible | current | This table contains additional information concerning the ethernet interfaces of a STM-1 card. It represents an extension of the if(X)Table (see IF-MIB). |
| 1.3.6.1.4.1.6368.2.8.3.1 | RowethernetIfEntry | not-accessible | current | Row and index definition for the ethernetIfTable. |
| 1.3.6.1.4.1.6368.2.8.3.1.1 | ColumnetherIfConcatenationOption | read-write | current | Configuration of the Link Capacity Adjustment Scheme. |
| 1.3.6.1.4.1.6368.2.8.3.1.2 | ColumnetherIfEncapsulation | read-only | current | This attribute shows the used Ethernet encapsulation protocol. |
| 1.3.6.1.4.1.6368.2.8.3.1.3 | ColumnetherIfOrderLevel | read-only | current | Only relevant, if SDH Multiplexing Mode (see STM-1 card propertied) is set to VC3. |
| 1.3.6.1.4.1.6368.2.8.3.1.4 | ColumnetherIfAlarmStatus | read-only | current | This variable indicates the status of an Ethernet Interface. It's a bitmap represented as a sum. Therefore multiple defects can be displayed simultaneously. Th… |
| 1.3.6.1.4.1.6368.2.8.4 | TablevcTable | not-accessible | current | This table contains additional information for VC concerning the multiplexing configuration. It's an extension of the ifTable (IF-MIB) and the tables of the SO… |
| 1.3.6.1.4.1.6368.2.8.4.1 | RowvcEntry | not-accessible | current | Row and index definition for the vcConfigTable. |
| 1.3.6.1.4.1.6368.2.8.4.1.1 | ColumnvcType | read-only | current | Type of Virtual Container (VC). In Pegasus VC-4, VC-3 or VC-12. |
| 1.3.6.1.4.1.6368.2.8.4.1.2 | ColumnvcRelatedTUG | read-only | current | Represents the index of the Tributary Unit Group within the tugConfigTable to which this VC is assigned to. The value depends also on the multiplexing mode. If… |
| 1.3.6.1.4.1.6368.2.8.4.1.3 | ColumnvcRelatedVC | read-only | current | Represents the index of the Virtual Container within the ifTable to which this VC is assigned to. The value depends also on the multiplexing mode. If the value… |
| 1.3.6.1.4.1.6368.2.8.4.1.4 | ColumnvcAssignedIfIndex | read-write | current | Represents the index of the interface within the ifTable (IF-MIB) that transmits to this VC. |
| 1.3.6.1.4.1.6368.2.8.4.1.5 | ColumnvcPathTraceSend | read-write | current | The value of the outgoing J1 Byte VC Path Trace byte message. |
| 1.3.6.1.4.1.6368.2.8.4.1.6 | ColumnvcPathTraceExpected | read-write | current | The value of the expected J1 Byte VC Path Trace byte message. |
| 1.3.6.1.4.1.6368.2.8.4.1.7 | ColumnvcPathTraceReceive | read-only | current | The value of the incoming J1 Byte VC Path Trace byte message. |
| 1.3.6.1.4.1.6368.2.8.4.1.8 | ColumnvcSignalLabelSend | read-write | current | The outgoing C2 VC Signal Label (0x02 = TUG structure). |
| 1.3.6.1.4.1.6368.2.8.4.1.9 | ColumnvcSignalLabelExpected | read-write | current | The expected C2 VC Signal Label (0x02 = TUG structure). |
| 1.3.6.1.4.1.6368.2.8.4.1.10 | ColumnvcSignalLabelReceive | read-only | current | The incoming C2 VC Signal Label (0x02 = TUG structure). |
| 1.3.6.1.4.1.6368.2.8.4.1.11 | ColumnvcAlarmStatus | read-only | current | This variable indicates the status of the VC. It's a bitmap represented as a sum. Therefore multiple defects can be displayed simultaneously. The value noDefec… |
| 1.3.6.1.4.1.6368.2.8.5 | TabletugConfigTable | not-accessible | current | This table contains information concerning Tributary Unit Groups. If AU-3 structure is used, this table is empty. |
| 1.3.6.1.4.1.6368.2.8.5.1 | RowtugConfigEntry | not-accessible | current | Row and index definition for the tugConfigTable. |
| 1.3.6.1.4.1.6368.2.8.5.1.1 | ColumntugIndex | not-accessible | current | Number of the TUG. Range 1..3 |
| 1.3.6.1.4.1.6368.2.8.5.1.2 | ColumntugRelatedVC4 | read-only | current | |
| 1.3.6.1.4.1.6368.2.8.5.1.3 | ColumntugOrderLevel | read-write | current | Individual Order Level of this TUG. If high order is used, the TUG has exactly one VC-3 and no VC-12s. If low order is used, the TUG has exactly 21 VC-12 and n… |
| 1.3.6.1.4.1.6368.2.8.6 | ScalarsdhMibRevision | read-only | current | The version number assigned by the version control system. You can query this from the agent, to find out with which version of the MIB was built into the agen… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SignalLabel | INTEGER(0..7|18..26|207|225..252|254..255) ConcatenationTypeEnum ::= INTEGER { lcas(1), nonLCAS(2) } EthernetIfEncapsulationEnum ::= INTEGER { disabled(1), gfp(2), lapf(3), laps(4), ppp(5) } OrderLevelEnum ::= INTEGER { highOrder(1), lowOrder(2) } STM1SlotNumber ::= INTEGER(2) TUGIndex ::= INTEGER(1..3) TUGIndexOrZero ::= INTEGER(0..3) | current | Representation of a VC Signal Label. The meaning of the SignalLabel depends on the type of vitual container. VC-12s use the following values: 001b Unequipped 001b Equipped (non specific) 010b Asynchronous 011b Bit Synch… |