PICO-IPSEC-FLOW-MONITOR-MIB
211 objects
No module-level DESCRIPTION found.
Imported Objects
| PICO-SMI | picoIpSecFlowMonitorMIB |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| SNMPv2-TC | DisplayString TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.119.2.3.84.3.1 | NodepipSecMIBObjects | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.1 | NodepipSecLevels | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.1.1 | ScalarpipSecMibLevel | read-only | mandatory | The version of the IPsec MIB. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2 | NodepipSecPhaseOne | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1 | NodepikeGlobalStats | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.1 | ScalarpikeGlobalActiveTunnels | read-only | mandatory | The number of currently active IPsec Phase-1 IKE Tunnels. This is equal to the number of ISAKMP SAs currently active. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.6 | ScalarpikeGlobalInNotifys | read-only | mandatory | The total number of notifys received by all currently and previously active IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.7 | ScalarpikeGlobalInP2Exchgs | read-only | mandatory | The total number of IPsec Phase-2 exchanges received by all currently and previously active IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.8 | ScalarpikeGlobalInP2ExchgInvalids | read-only | mandatory | The total number of IPsec Phase-2 exchanges which were received and found to be contain references to unrecognized security parameters. This value is accumulat… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.9 | ScalarpikeGlobalInP2ExchgRejects | read-only | mandatory | The total number of IPsec Phase-2 exchanges which were received and validated but were rejected by the local policy. This value is accumulated across all curre… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.10 | ScalarpikeGlobalInP2SaDelRequests | read-only | mandatory | The total number of IPsec Phase-2 security association delete requests received by all currently and previously active and IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.14 | ScalarpikeGlobalOutNotifys | read-only | mandatory | The total number of notifys sent by all currently and previously active IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.15 | ScalarpikeGlobalOutP2Exchgs | read-only | mandatory | The total number of IPsec Phase-2 exchanges which were sent by all currently and previously active IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.16 | ScalarpikeGlobalOutP2ExchgInvalids | read-only | mandatory | The total number of IPsec Phase-2 exchanges which were sent and were flagged by the peer to contain references to unrecognized security parameters. This value … |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.17 | ScalarpikeGlobalOutP2ExchgRejects | read-only | mandatory | The total number of IPsec Phase-2 exchanges which were sent, validated by the peer but were rejected by the peer's policy. This value is accumulated across all… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.18 | ScalarpikeGlobalOutP2SaDelRequests | read-only | mandatory | The total number of IPsec Phase-2 SA delete requests sent by all currently and previously active IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.19 | ScalarpikeGlobalInitTunnels | read-only | mandatory | The total number of IPsec Phase-1 IKE Tunnels which were locally initiated. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.20 | ScalarpikeGlobalInitTunnelFails | read-only | mandatory | The total number of IPsec Phase-1 IKE Tunnels which were locally initiated and failed to activate. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.21 | ScalarpikeGlobalRespTunnelFails | read-only | mandatory | The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated and failed to activate. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.23 | ScalarpikeGlobalAuthFails | read-only | mandatory | The total number of authentications which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.24 | ScalarpikeGlobalDecryptFails | read-only | mandatory | The total number of decryptions which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.25 | ScalarpikeGlobalHashValidFails | read-only | mandatory | The total number of hash validations which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.27 | ScalarpikeGlobalRespTunnels | read-only | mandatory | The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.30 | ScalarpikeGlobalInP1SaDelRequests | read-only | mandatory | The total number of ISAKMP security association delete requests received by all currently and previously active and ISAKMP security associations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.1.31 | ScalarpikeGlobalOutP1SaDelRequests | read-only | mandatory | The total number of ISAKMP security association delete requests sent by all currently and previously active and ISAKMP security associations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2 | TablepikePeerTable | not-accessible | mandatory | The IPsec Phase-1 Internet Key Exchange Peer Table. There is one entry in this table for each IPsec Phase-1 IKE peer association which is currently associated … |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1 | RowpikePeerEntry | not-accessible | mandatory | Each entry contains the attributes associated with an IPsec Phase-1 IKE peer association. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.1 | ColumnpikePeerLocalType | not-accessible | mandatory | The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name. 3. or a distinguished name. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.2 | ColumnpikePeerLocalValue | not-accessible | mandatory | The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer t… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.3 | ColumnpikePeerRemoteType | not-accessible | mandatory | The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name. 3. or a distinguished name. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.4 | ColumnpikePeerRemoteValue | not-accessible | mandatory | The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote pe… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.5 | ColumnpikePeerIntIndex | not-accessible | mandatory | The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote pe… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.6 | ColumnpikePeerLocalAddr | read-only | mandatory | The IP address of the local peer. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.7 | ColumnpikePeerRemoteAddr | read-only | mandatory | The IP address of the remote peer. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.8 | ColumnpikePeerActiveTime | read-only | mandatory | The length of time that the peer association has existed in hundredths of a second. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.2.1.9 | ColumnpikePeerActiveTunnelIndex | read-only | mandatory | The index of the active IPsec Phase-1 IKE Tunnel (pikeTunIndex in the pikeTunnelTable) for this peer association. If an IPsec Phase-1 IKE Tunnel is not current… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3 | TablepikeTunnelTable | not-accessible | mandatory | The IPsec Phase-1 Internet Key Exchange Tunnel Table. There is one entry in this table for each active IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1 | RowpikeTunnelEntry | not-accessible | mandatory | Each entry contains the attributes associated with an active IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.1 | ColumnpikeTunIndex | not-accessible | mandatory | The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. Th… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.2 | ColumnpikeTunLocalType | read-only | mandatory | The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name string. 3. or a distinguished na… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.3 | ColumnpikeTunLocalValue | read-only | mandatory | The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer t… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.4 | ColumnpikeTunLocalAddr | read-only | mandatory | The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.6 | ColumnpikeTunRemoteType | read-only | mandatory | The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name string. 3. or a distinguished … |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.7 | ColumnpikeTunRemoteValue | read-only | mandatory | The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote pe… |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.8 | ColumnpikeTunRemoteAddr | read-only | mandatory | The IP address of the remote endpoint for the IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.10 | ColumnpikeTunNegoMode | read-only | mandatory | The negotiation mode of the IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.11 | ColumnpikeTunDiffHellmanGrp | read-only | mandatory | The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.12 | ColumnpikeTunEncryptAlgo | read-only | mandatory | The encryption algorithm used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.13 | ColumnpikeTunHashAlgo | read-only | mandatory | The hash algorithm used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.14 | ColumnpikeTunAuthMethod | read-only | mandatory | The authentication method used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.15 | ColumnpikeTunLifeTime | read-only | mandatory | The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.16 | ColumnpikeTunActiveTime | read-only | mandatory | The length of time the IPsec Phase-1 IKE tunnel has been active in hundredths of seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.17 | ColumnpikeTunSaRefreshThreshold | read-only | mandatory | The security assoication refresh threshold in seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.22 | ColumnpikeTunInNotifys | read-only | mandatory | The total number of notifys received by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.23 | ColumnpikeTunInP2Exchgs | read-only | mandatory | The total number of IPsec Phase-2 exchanges received by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.24 | ColumnpikeTunInP2ExchgInvalids | read-only | mandatory | The total number of IPsec Phase-2 exchanges received on this tunnel that were found to contain references to unrecognized security parameters. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.25 | ColumnpikeTunInP2ExchgRejects | read-only | mandatory | The total number of IPsec Phase-2 exchanges received on this tunnel that were validated but were rejected by the local policy. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.26 | ColumnpikeTunInP2SaDelRequests | read-only | mandatory | The total number of IPsec Phase-2 security association delete requests received by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.30 | ColumnpikeTunOutNotifys | read-only | mandatory | The total number of notifys sent by this IPsec Phase-1 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.31 | ColumnpikeTunOutP2Exchgs | read-only | mandatory | The total number of IPsec Phase-2 exchanges sent by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.32 | ColumnpikeTunOutP2ExchgInvalids | read-only | mandatory | The total number of IPsec Phase-2 exchanges sent on this tunnel that were found by the peer to contain references to security parameters not recognized by the … |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.33 | ColumnpikeTunOutP2ExchgRejects | read-only | mandatory | The total number of IPsec Phase-2 exchanges sent on this tunnel that were validated by the peer but were rejected by the peer's policy. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.34 | ColumnpikeTunOutP2SaDelRequests | read-only | mandatory | The total number of IPsec Phase-2 security association delete requests sent by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.2.3.1.35 | ColumnpikeTunStatus | read-only | mandatory | The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). This object cannot be used to … |
| 1.3.6.1.4.1.119.2.3.84.3.1.3 | NodepipSecPhaseTwo | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1 | NodepipSecGlobalStats | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.1 | ScalarpipSecGlobalActiveTunnels | read-only | mandatory | The total number of currently active IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.3 | ScalarpipSecGlobalInOctets | read-only | mandatory | The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet s… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.9 | ScalarpipSecGlobalInPkts | read-only | mandatory | The total number of packets received by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.10 | ScalarpipSecGlobalInDrops | read-only | mandatory | The total number of packets dropped during receive processing by all current and previous IPsec Phase-2 Tunnels. This count does NOT include packets dropped du… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.11 | ScalarpipSecGlobalInReplayDrops | read-only | mandatory | The total number of packets dropped during receive processing due to Anti-Replay processing by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.12 | ScalarpipSecGlobalInAuths | read-only | mandatory | The total number of inbound authentication's performed by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.13 | ScalarpipSecGlobalInAuthFails | read-only | mandatory | The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.14 | ScalarpipSecGlobalInDecrypts | read-only | mandatory | The total number of inbound decryption's performed by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.15 | ScalarpipSecGlobalInDecryptFails | read-only | mandatory | The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.16 | ScalarpipSecGlobalOutOctets | read-only | mandatory | The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.22 | ScalarpipSecGlobalOutPkts | read-only | mandatory | The total number of packets sent by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.23 | ScalarpipSecGlobalOutDrops | read-only | mandatory | The total number of packets dropped during send processing by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.24 | ScalarpipSecGlobalOutAuths | read-only | mandatory | The total number of outbound authentication's performed by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.25 | ScalarpipSecGlobalOutAuthFails | read-only | mandatory | The total number of outbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.26 | ScalarpipSecGlobalOutEncrypts | read-only | mandatory | The total number of outbound encryption's performed by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.27 | ScalarpipSecGlobalOutEncryptFails | read-only | mandatory | The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.1.33 | ScalarpipSecGlobalNoSaFails | read-only | mandatory | The total number of non-existent Security Assocication in failures which occurred during processing of all current and previous IPsec Phase-2 Tunnels. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2 | TablepipSecTunnelTable | not-accessible | mandatory | The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1 | RowpipSecTunnelEntry | not-accessible | mandatory | Each entry contains the attributes associated with an active IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.1 | ColumnpipSecTunIndex | not-accessible | mandatory | The index of the IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The va… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.2 | ColumnpipSecTunIkeTunnelIndex | read-only | mandatory | The index of the associated IPsec Phase-1 IKE Tunnel. (pikeTunIndex in the pikeTunnelTable) |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.3 | ColumnpipSecTunIkeTunnelAlive | read-only | mandatory | An indicator which specifies whether or not the IPsec Phase-1 IKE Tunnel currently exists. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.4 | ColumnpipSecTunLocalAddr | read-only | mandatory | The IP address of the local endpoint for the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.5 | ColumnpipSecTunRemoteAddr | read-only | mandatory | The IP address of the remote endpoint for the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.6 | ColumnpipSecTunKeyType | read-only | mandatory | The type of key used by the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.7 | ColumnpipSecTunEncapMode | read-only | mandatory | The encapsulation mode used by the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.8 | ColumnpipSecTunLifeSize | read-only | mandatory | The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.9 | ColumnpipSecTunLifeTime | read-only | mandatory | The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.10 | ColumnpipSecTunActiveTime | read-only | mandatory | The length of time the IPsec Phase-2 Tunnel has been active in hundredths of seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.11 | ColumnpipSecTunSaLifeSizeThreshold | read-only | mandatory | The security association LifeSize refresh threshold in kilobytes. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.12 | ColumnpipSecTunSaLifeTimeThreshold | read-only | mandatory | The security association LifeTime refresh threshold in seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.13 | ColumnpipSecTunTotalRefreshes | read-only | mandatory | The total number of security association refreshes performed. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.14 | ColumnpipSecTunExpiredSaInstances | read-only | mandatory | The total number of security associations which have expired. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.15 | ColumnpipSecTunCurrentSaInstances | read-only | mandatory | The number of security associations which are currently active or expiring. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.16 | ColumnpipSecTunInSaDiffHellmanGrp | read-only | mandatory | The Diffie Hellman Group used by the inbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.17 | ColumnpipSecTunInSaEncryptAlgo | read-only | mandatory | The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.18 | ColumnpipSecTunInSaAhAuthAlgo | read-only | mandatory | The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.19 | ColumnpipSecTunInSaEspAuthAlgo | read-only | mandatory | The authentication algorithm used by the inbound ecapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.21 | ColumnpipSecTunOutSaDiffHellmanGrp | read-only | mandatory | The Diffie Hellman Group used by the outbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.22 | ColumnpipSecTunOutSaEncryptAlgo | read-only | mandatory | The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.23 | ColumnpipSecTunOutSaAhAuthAlgo | read-only | mandatory | The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.24 | ColumnpipSecTunOutSaEspAuthAlgo | read-only | mandatory | The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.26 | ColumnpipSecTunPmtu | read-only | mandatory | The Path MTU that has been determined for this IPsec Phase-2 tunnel. The lower end of the range is 68 which is the minimum MTU for IPv4. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.27 | ColumnpipSecTunInOctets | read-only | mandatory | The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.33 | ColumnpipSecTunInPkts | read-only | mandatory | The total number of packets received by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.34 | ColumnpipSecTunInDropPkts | read-only | mandatory | The total number of packets dropped during receive processing by this IPsec Phase-2 Tunnel. This count does NOT include packets dropped due to Anti-Replay proc… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.35 | ColumnpipSecTunInReplayDropPkts | read-only | mandatory | The total number of packets dropped during receive processing due to Anti-Replay processing by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.36 | ColumnpipSecTunInAuths | read-only | mandatory | The total number of inbound authentication's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.37 | ColumnpipSecTunInAuthFails | read-only | mandatory | The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel . |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.38 | ColumnpipSecTunInDecrypts | read-only | mandatory | The total number of inbound decryption's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.39 | ColumnpipSecTunInDecryptFails | read-only | mandatory | The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.40 | ColumnpipSecTunOutOctets | read-only | mandatory | The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See a… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.46 | ColumnpipSecTunOutPkts | read-only | mandatory | The total number of packets sent by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.47 | ColumnpipSecTunOutDropPkts | read-only | mandatory | The total number of packets dropped during send processing by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.48 | ColumnpipSecTunOutAuths | read-only | mandatory | The total number of outbound authentication's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.49 | ColumnpipSecTunOutAuthFails | read-only | mandatory | The total number of outbound authentication's which ended in failure by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.50 | ColumnpipSecTunOutEncrypts | read-only | mandatory | The total number of outbound encryption's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.51 | ColumnpipSecTunOutEncryptFails | read-only | mandatory | The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.2.1.56 | ColumnpipSecTunStatus | read-only | mandatory | The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). When the value is set to destr… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4 | TablepipSecSpiTable | not-accessible | deprecated | The IPsec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4.1 | RowpipSecSpiEntry | not-accessible | deprecated | Each entry contains the attributes associated with active and expiring IPsec Phase-2 security associations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4.1.1 | ColumnpipSecSpiIndex | not-accessible | deprecated | The number of the SPI associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each SPI associ… |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4.1.2 | ColumnpipSecSpiDirection | read-only | deprecated | The direction of the SPI. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4.1.3 | ColumnpipSecSpiValue | read-only | deprecated | The value of the SPI. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4.1.4 | ColumnpipSecSpiProtocol | read-only | deprecated | The protocol of the SPI. |
| 1.3.6.1.4.1.119.2.3.84.3.1.3.4.1.5 | ColumnpipSecSpiStatus | read-only | deprecated | The status of the SPI. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4 | NodepipSecHistory | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2 | NodepipSecHistPhaseOne | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1 | TablepikeTunnelHistTable | not-accessible | mandatory | The IPsec Phase-1 Internet Key Exchange Tunnel History Table. This table is implemented as a sliding window in which only the last n entries are maintained. Th… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1 | RowpikeTunnelHistEntry | not-accessible | mandatory | Each entry contains the attributes associated with a previously active IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.1 | ColumnpikeTunHistIndex | not-accessible | mandatory | The index of the IPsec Phase-1 IKE Tunnel History Table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. … |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.2 | ColumnpikeTunHistTermReason | read-only | mandatory | The reason the IPsec Phase-1 IKE Tunnel was terminated. Possible reasons include: 1 = other 2 = normal termination 3 = operator request 4 = peer delete request… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.3 | ColumnpikeTunHistActiveIndex | read-only | mandatory | The index of the previously active IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.4 | ColumnpikeTunHistPeerLocalType | read-only | mandatory | The type of local peer identity. The local peer may be indentified by: 1. an IP address, or 2. or a fully qualified domain name. 3. or a distinguished name. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.5 | ColumnpikeTunHistPeerLocalValue | read-only | mandatory | The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer t… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.6 | ColumnpikeTunHistPeerIntIndex | read-only | mandatory | The internal index of the local-remote peer association. This internal index is used to uniquely identify multiple associations between the local and remote pe… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.7 | ColumnpikeTunHistPeerRemoteType | read-only | mandatory | The type of remote peer identity. The remote peer may be indentified by: 1. an IP address, or 2. or a fully qualified domain name. 3. or a distinguished name. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.8 | ColumnpikeTunHistPeerRemoteValue | read-only | mandatory | The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote pe… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.9 | ColumnpikeTunHistLocalAddr | read-only | mandatory | The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.11 | ColumnpikeTunHistRemoteAddr | read-only | mandatory | The IP address of the remote endpoint for the IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.13 | ColumnpikeTunHistNegoMode | read-only | mandatory | The negotiation mode of the IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.14 | ColumnpikeTunHistDiffHellmanGrp | read-only | mandatory | The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.15 | ColumnpikeTunHistEncryptAlgo | read-only | mandatory | The encryption algorithm used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.16 | ColumnpikeTunHistHashAlgo | read-only | mandatory | The hash algorithm used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.17 | ColumnpikeTunHistAuthMethod | read-only | mandatory | The authentication method used in IPsec Phase-1 IKE negotiations. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.18 | ColumnpikeTunHistLifeTime | read-only | mandatory | The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.19 | ColumnpikeTunHistStartTime | read-only | mandatory | The value of sysUpTime in hundredths of seconds when the IPsec Phase-1 IKE tunnel was started. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.20 | ColumnpikeTunHistActiveTime | read-only | mandatory | The length of time the IPsec Phase-1 IKE tunnel was been active in hundredths of seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.26 | ColumnpikeTunHistInNotifys | read-only | mandatory | The total number of notifys received by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.27 | ColumnpikeTunHistInP2Exchgs | read-only | mandatory | The total number of IPsec Phase-2 exchanges received by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.28 | ColumnpikeTunHistInP2ExchgInvalids | read-only | mandatory | The total number of IPsec Phase-2 exchanges received on this tunnel that were found to contain references to unrecognized security parameters. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.29 | ColumnpikeTunHistInP2ExchgRejects | read-only | mandatory | The total number of IPsec Phase-2 exchanges received on this tunnel that were validated but were rejected by the local policy. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.30 | ColumnpikeTunHistInP2SaDelRequests | read-only | mandatory | The total number of IPsec Phase-2 security association delete requests received by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.34 | ColumnpikeTunHistOutNotifys | read-only | mandatory | The total number of notifys sent by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.35 | ColumnpikeTunHistOutP2Exchgs | read-only | mandatory | The total number of IPsec Phase-2 exchanges sent by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.36 | ColumnpikeTunHistOutP2ExchgInvalids | read-only | mandatory | The total number of IPsec Phase-2 exchanges sent on this tunnel that were found by the peer to contain references to security parameters not recognized by the … |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.37 | ColumnpikeTunHistOutP2ExchgRejects | read-only | mandatory | The total number of IPsec Phase-2 exchanges sent on this tunnel that were validated by the peer but were rejected by the peer's policy. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.2.1.1.38 | ColumnpikeTunHistOutP2SaDelRequests | read-only | mandatory | The total number of IPsec Phase-2 security association delete requests sent by this IPsec Phase-1 IKE Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3 | NodepipSecHistPhaseTwo | |||
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1 | TablepipSecTunnelHistTable | not-accessible | mandatory | The IPsec Phase-2 Tunnel History Table. This table is implemented as a sliding window in which only the last n entries are maintained. The maximum number of en… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1 | RowpipSecTunnelHistEntry | not-accessible | mandatory | Each entry contains the attributes associated with a previously active IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.1 | ColumnpipSecTunHistIndex | not-accessible | mandatory | The index of the IPsec Phase-2 Tunnel History Table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The … |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.2 | ColumnpipSecTunHistTermReason | read-only | mandatory | The reason the IPsec Phase-2 Tunnel was terminated. Possible reasons include: 1 = other 2 = normal termination 3 = operator request 4 = peer delete request was… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.3 | ColumnpipSecTunHistActiveIndex | read-only | mandatory | The index of the previously active IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.4 | ColumnpipSecTunHistIkeTunnelIndex | read-only | mandatory | The index of the associated IPsec Phase-1 Tunnel (pikeTunIndex in the pikeTunnelTable). |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.5 | ColumnpipSecTunHistLocalAddr | read-only | mandatory | The IP address of the local endpoint for the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.6 | ColumnpipSecTunHistRemoteAddr | read-only | mandatory | The IP address of the remote endpoint for the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.7 | ColumnpipSecTunHistKeyType | read-only | mandatory | The type of key used by the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.8 | ColumnpipSecTunHistEncapMode | read-only | mandatory | The encapsulation mode used by the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.9 | ColumnpipSecTunHistLifeSize | read-only | mandatory | The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.10 | ColumnpipSecTunHistLifeTime | read-only | mandatory | The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.11 | ColumnpipSecTunHistStartTime | read-only | mandatory | The value of sysUpTime in hundredths of seconds when the IPsec Phase-2 Tunnel was started. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.12 | ColumnpipSecTunHistActiveTime | read-only | mandatory | The length of time the IPsec Phase-2 Tunnel has been active in hundredths of seconds. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.13 | ColumnpipSecTunHistTotalRefreshes | read-only | mandatory | The total number of security association refreshes performed. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.15 | ColumnpipSecTunHistInSaDiffHellmanGrp | read-only | mandatory | The Diffie Hellman Group used by the inbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.16 | ColumnpipSecTunHistInSaEncryptAlgo | read-only | mandatory | The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.17 | ColumnpipSecTunHistInSaAhAuthAlgo | read-only | mandatory | The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.18 | ColumnpipSecTunHistInSaEspAuthAlgo | read-only | mandatory | The authentication algorithm used by the inbound encapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.20 | ColumnpipSecTunHistOutSaDiffHellmanGrp | read-only | mandatory | The Diffie Hellman Group used by the outbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.21 | ColumnpipSecTunHistOutSaEncryptAlgo | read-only | mandatory | The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.22 | ColumnpipSecTunHistOutSaAhAuthAlgo | read-only | mandatory | The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.23 | ColumnpipSecTunHistOutSaEspAuthAlgo | read-only | mandatory | The authentication algorithm used by the inbound ecapsulation security protocol (ESP) security association of the IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.25 | ColumnpipSecTunHistPmtu | read-only | mandatory | The Path MTU that was determined for this IPsec Phase-2 tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.26 | ColumnpipSecTunHistInOctets | read-only | mandatory | The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.32 | ColumnpipSecTunHistInPkts | read-only | mandatory | The total number of packets received by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.33 | ColumnpipSecTunHistInDropPkts | read-only | mandatory | The total number of packets dropped during receive processing by this IPsec Phase-2 Tunnel. This count does NOT include packets dropped due to Anti-Replay proc… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.34 | ColumnpipSecTunHistInReplayDropPkts | read-only | mandatory | The total number of packets dropped during receive processing due to Anti-Replay processing by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.35 | ColumnpipSecTunHistInAuths | read-only | mandatory | The total number of inbound authentication's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.36 | ColumnpipSecTunHistInAuthFails | read-only | mandatory | The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel . |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.37 | ColumnpipSecTunHistInDecrypts | read-only | mandatory | The total number of inbound decryption's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.38 | ColumnpipSecTunHistInDecryptFails | read-only | mandatory | The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.39 | ColumnpipSecTunHistOutOctets | read-only | mandatory | The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See a… |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.45 | ColumnpipSecTunHistOutPkts | read-only | mandatory | The total number of packets sent by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.46 | ColumnpipSecTunHistOutDropPkts | read-only | mandatory | The total number of packets dropped during send processing by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.47 | ColumnpipSecTunHistOutAuths | read-only | mandatory | The total number of outbound authentication's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.48 | ColumnpipSecTunHistOutAuthFails | read-only | mandatory | The total number of outbound authentication's which ended in failure by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.49 | ColumnpipSecTunHistOutEncrypts | read-only | mandatory | The total number of outbound encryption's performed by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.1.4.3.1.1.50 | ColumnpipSecTunHistOutEncryptFails | read-only | mandatory | The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel. |
| 1.3.6.1.4.1.119.2.3.84.3.2 | NodepipSecMIBNotificationPrefix | |||
| 1.3.6.1.4.1.119.2.3.84.3.2.0 | NodepipSecMIBNotifications | |||
| 1.3.6.1.4.1.119.2.3.84.3.2.1 | NodepikeTunnelStart | This notification is generated when an IPsec Phase-1 IKE Tunnel becomes active. | ||
| 1.3.6.1.4.1.119.2.3.84.3.2.2 | NodepikeTunnelStop | This notification is generated when an IPsec Phase-1 IKE Tunnel becomes inactive. | ||
| 1.3.6.1.4.1.119.2.3.84.3.2.7 | NodepipSecTunnelStart | This notification is generated when an IPsec Phase-2 Tunnel becomes active. | ||
| 1.3.6.1.4.1.119.2.3.84.3.2.8 | NodepipSecTunnelStop | This notification is generated when an IPsec Phase-2 Tunnel becomes inactive. | ||
| 1.3.6.1.4.1.119.2.3.84.3.2.11 | NodepipSecEarlyTunTerm | This notification is generated when an an IPsec Phase-2 Tunnel is terminated earily or before expected. |