PICO-SMI
168 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| IPV6-TC | Ipv6Address |
| ISDN-MIB | isdnLapdOperStatus |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | BEGIN IMPORTS enterprises Counter Gauge IpAddress NetworkAddress TimeTicks |
| SNMPv2-TC | DisplayString PhysAddress TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.119 | Nodenec | |||
| 1.3.6.1.4.1.119.1 | NodenecProduct | |||
| 1.3.6.1.4.1.119.1.84 | Nodepico | |||
| 1.3.6.1.4.1.119.1.84.3 | NodepicoTemperatureFault | Detect a temperature failure | ||
| 1.3.6.1.4.1.119.1.84.4 | NodepicoTemperatureRestoration | Detect the restoration of temperature | ||
| 1.3.6.1.4.1.119.1.84.5 | NodepicoVoltageFault | Detect a voltage failure | ||
| 1.3.6.1.4.1.119.1.84.6 | NodepicoVoltageRestoration | Detect the restoration of voltage | ||
| 1.3.6.1.4.1.119.1.84.7 | NodepicoFanFault | Detect a cooling fan failure | ||
| 1.3.6.1.4.1.119.1.84.8 | NodepicoFanRestoration | Detect the restoration of cooling fan | ||
| 1.3.6.1.4.1.119.1.84.9 | NodepicoPowerSupplyFault | Detect a Power Supply Module failure | ||
| 1.3.6.1.4.1.119.1.84.10 | NodepicoPowerSupplyRestoration | Detect the restoration of Power Supply Module | ||
| 1.3.6.1.4.1.119.1.84.11 | NodepicoPowerSupplyInserted | Detect a Power Supply Module inserted | ||
| 1.3.6.1.4.1.119.1.84.12 | NodepicoPowerSupplyRemoved | Detect a Power Supply Module removed | ||
| 1.3.6.1.4.1.119.1.84.13 | NodepicoLoginSession | This notification is user login status | ||
| 1.3.6.1.4.1.119.1.84.14 | NodepicoLoginFailure | This notification is login authentication fail | ||
| 1.3.6.1.4.1.119.1.84.15 | NodepicoConfigMode | This notification is config process status. | ||
| 1.3.6.1.4.1.119.1.84.16 | NodepicoConfigModified | This notification is configuration modified status. | ||
| 1.3.6.1.4.1.119.1.84.17 | NodepicoExtIfLinkDown | This notification is port link down status. | ||
| 1.3.6.1.4.1.119.1.84.18 | NodepicoExtIfLinkUp | This notification is port link up status. | ||
| 1.3.6.1.4.1.119.2 | Nodenec-mib | |||
| 1.3.6.1.4.1.119.2.3 | NodenecProductDepend | |||
| 1.3.6.1.4.1.119.2.3.84 | Nodepico-mib | |||
| 1.3.6.1.4.1.119.2.3.84.1 | NodepicoOriginal | |||
| 1.3.6.1.4.1.119.2.3.84.2 | NodepicoSystem | |||
| 1.3.6.1.4.1.119.2.3.84.2.1 | NodepicoTemperature | |||
| 1.3.6.1.4.1.119.2.3.84.2.1.1 | ScalarpicoCelsius | read-only | mandatory | Indicates the temperature of the equipment inside, in degree (Celsius). |
| 1.3.6.1.4.1.119.2.3.84.2.1.2 | ScalarpicoFahrenheit | read-only | mandatory | Indicates the temperature of the equipment inside, in degree (Fahrenheit). |
| 1.3.6.1.4.1.119.2.3.84.2.2 | ScalarpicoVoltage | read-only | mandatory | Indicates the observed voltage, in milli-volt (mV). |
| 1.3.6.1.4.1.119.2.3.84.2.3 | TablepicoFanTable | not-accessible | optional | The table of fan status. |
| 1.3.6.1.4.1.119.2.3.84.2.3.1 | RowpicoFanEntry | not-accessible | optional | Fan module entry. |
| 1.3.6.1.4.1.119.2.3.84.2.3.1.1 | ColumnpicoFanIndex | read-only | optional | Unique index for each fan module. |
| 1.3.6.1.4.1.119.2.3.84.2.3.1.2 | ColumnpicoFanStatus | read-only | optional | Status of a fan module |
| 1.3.6.1.4.1.119.2.3.84.2.3.1.3 | ColumnpicoFanRpm | read-only | optional | Fan speed (Revolution Per Minutes). picoFanRpm will be set to 0 if Fan speed is less than 5294(rpm). |
| 1.3.6.1.4.1.119.2.3.84.2.4 | TablepicoPowerSupplyTable | not-accessible | optional | The table of Power Supply module status. |
| 1.3.6.1.4.1.119.2.3.84.2.4.1 | RowpicoPowerSupplyEntry | not-accessible | optional | System Power Supply module entry. |
| 1.3.6.1.4.1.119.2.3.84.2.4.1.1 | ColumnpicoPowerSupplyIndex | read-only | optional | Unique index for each power supply module. |
| 1.3.6.1.4.1.119.2.3.84.2.4.1.2 | ColumnpicoPowerSupplyType | read-only | optional | Power supply module type. |
| 1.3.6.1.4.1.119.2.3.84.2.4.1.3 | ColumnpicoPowerSupplyStatus | read-only | optional | Status of a Power Supply module. |
| 1.3.6.1.4.1.119.2.3.84.2.5 | NodepicoSched | |||
| 1.3.6.1.4.1.119.2.3.84.2.5.1 | ScalarpicoSchedRtUtl1Sec | read-only | mandatory | Indicates the observed system utilization for last 1 second, in percent (%). |
| 1.3.6.1.4.1.119.2.3.84.2.5.2 | ScalarpicoSchedRtUtl5Sec | read-only | mandatory | Indicates the observed system utilization for last 5 seconds, in percent (%). |
| 1.3.6.1.4.1.119.2.3.84.2.5.3 | ScalarpicoSchedRtUtl1Min | read-only | mandatory | Indicates the observed system utilization for last 1 minute, in percent (%). |
| 1.3.6.1.4.1.119.2.3.84.2.5.4 | ScalarpicoSchedRtUtl1Hour | read-only | mandatory | Indicates the observed system utilization for last 1 hour, in percent (%). |
| 1.3.6.1.4.1.119.2.3.84.2.6 | NodepicoHeap | |||
| 1.3.6.1.4.1.119.2.3.84.2.6.1 | ScalarpicoHeapSize | read-only | mandatory | Indicates the observed total heap size, in bytes. |
| 1.3.6.1.4.1.119.2.3.84.2.6.2 | ScalarpicoHeapUtil | read-only | mandatory | Indicates the observed current heap utilization, in percent (%). |
| 1.3.6.1.4.1.119.2.3.84.3 | NodepicoIpSecFlowMonitorMIB | |||
| 1.3.6.1.4.1.119.2.3.84.4 | NodepicoLoginMIB | |||
| 1.3.6.1.4.1.119.2.3.84.4.1 | TablepicoLoginSessionTable | not-accessible | mandatory | The table of login session. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1 | RowpicoLoginSessionEntry | not-accessible | mandatory | Login session entry. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.1 | ColumnpicoLoginSessionIndex | not-accessible | mandatory | Unique index for each login. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.2 | ColumnpicoLoginSessionStatus | read-only | mandatory | Status of a login session. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.3 | ColumnpicoLoginSessionPrivilege | read-only | mandatory | User privilege of a login session. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.4 | ColumnpicoLoginSessionProcessMode | read-only | mandatory | User process status of a login session. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.5 | ColumnpicoLoginSessionTerminalType | read-only | mandatory | Terminal type of a login session. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.6 | ColumnpicoLoginSessionPeerIpAddress | read-only | mandatory | Peer ipv4 address of a login session. |
| 1.3.6.1.4.1.119.2.3.84.4.1.1.7 | ColumnpicoLoginSessionPeerIpv6Address | read-only | mandatory | Peer ipv6 address of a login session. |
| 1.3.6.1.4.1.119.2.3.84.5 | NodepicoConfigEventMIB | |||
| 1.3.6.1.4.1.119.2.3.84.5.1 | ScalarpicoConfigType | not-accessible | mandatory | Configuration type. |
| 1.3.6.1.4.1.119.2.3.84.5.2 | ScalarpicoConfigEventType | not-accessible | mandatory | Event type of configuration modified. |
| 1.3.6.1.4.1.119.2.3.84.6 | NodepicoExtIfMIB | |||
| 1.3.6.1.4.1.119.2.3.84.6.1 | TablepicoExtIfTable | not-accessible | mandatory | A list of interface entries. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1 | RowpicoExtIfEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.1 | ColumnpicoExtIfInstalledSlot | not-accessible | mandatory | The slot number in which the extension card was installed. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.2 | ColumnpicoExtIfIndex | not-accessible | mandatory | A unique value for each extension card. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.3 | ColumnpicoExtIfDescr | read-only | mandatory | A textual string containing information about the interface. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.4 | ColumnpicoExtIfUpperLayer | read-only | mandatory | Index of interface to upper layers. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.5 | ColumnpicoExtIfType | read-only | mandatory | The type of interface,, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.6 | ColumnpicoExtIfSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.7 | ColumnpicoExtIfDuplex | read-only | mandatory | The current mode of this link. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.8 | ColumnpicoExtIfEffectiveMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.9 | ColumnpicoExtIfPhysicalAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.10 | ColumnpicoExtIfAdminStatus | read-only | mandatory | The desired state of the interface. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.11 | ColumnpicoExtIfOperStatus | read-only | mandatory | The current operational state of the interface. |
| 1.3.6.1.4.1.119.2.3.84.6.1.1.12 | ColumnpicoExtIfLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. |
| 1.3.6.1.4.1.119.2.3.84.7 | NodepicoNetworkMonitorMIB | |||
| 1.3.6.1.4.1.119.2.3.84.7.1 | NodepicoNetmonMibObjects | |||
| 1.3.6.1.4.1.119.2.3.84.7.1.1 | TablepicoNetmonWatchgroupTable | not-accessible | mandatory | The table of Netmon entry. |
| 1.3.6.1.4.1.119.2.3.84.7.1.1.1 | RowpicoNetmonWatchgroupEntry | not-accessible | mandatory | Netmon Watchgroup entry. |
| 1.3.6.1.4.1.119.2.3.84.7.1.1.1.1 | ColumnpicoNetmonWatchgroupIndex | read-only | mandatory | Unique index for each Netmon Watchgroup. |
| 1.3.6.1.4.1.119.2.3.84.7.1.1.1.2 | ColumnpicoNetmonWatchgroupName | read-only | mandatory | Netmon Watchgroup Name. |
| 1.3.6.1.4.1.119.2.3.84.7.1.1.1.3 | ColumnpicoNetmonWatchgroupSequenceNumber | read-only | mandatory | Netmon Watchgroup sequence number. |
| 1.3.6.1.4.1.119.2.3.84.7.1.1.1.4 | ColumnpicoNetmonWatchgroupStatus | read-only | mandatory | Status of a Netmon Watchgroup. |
| 1.3.6.1.4.1.119.2.3.84.7.1.1.1.5 | ColumnpicoNetmonWatchgroupVarianceCounts | read-only | mandatory | Netmon Watchgroup variance statistics. |
| 1.3.6.1.4.1.119.2.3.84.7.2 | NodepicoNetmonMIBNotificationPrefix | |||
| 1.3.6.1.4.1.119.2.3.84.7.2.0 | NodepicoNetmonMIBNotifications | |||
| 1.3.6.1.4.1.119.2.3.84.7.2.1 | NodepicoNetMonWatchGroupStatusChange | This notification is Netmon Watchgroup status change. | ||
| 1.3.6.1.4.1.119.2.3.84.8 | NodepicoIsdnMIB | |||
| 1.3.6.1.4.1.119.2.3.84.8.1 | NodepicoIsdnMIBObjects | |||
| 1.3.6.1.4.1.119.2.3.84.8.2 | NodepicoIsdnMIBNotificationPrefix | |||
| 1.3.6.1.4.1.119.2.3.84.8.2.0 | NodepicoIsdnMIBNotifications | |||
| 1.3.6.1.4.1.119.2.3.84.8.2.3 | NodepicoIsdnLapdOperStatusChange | This trap/inform is sent to the manager whenever the D-channel of an interface changes state. | ||
| 1.3.6.1.4.1.119.2.3.84.9 | NodepicoNgnMIB | |||
| 1.3.6.1.4.1.119.2.3.84.9.1 | NodepicoNgnMIBObjects | |||
| 1.3.6.1.4.1.119.2.3.84.9.1.1 | TablepicoNgnTable | not-accessible | mandatory | The table of the NGN entry. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1 | RowpicoNgnEntry | not-accessible | mandatory | NGN entry. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.1 | ColumnpicoNgnIfIndex | not-accessible | mandatory | The interface index value of the interface for which NGN is enabled. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.2 | ColumnpicoNgnType | read-only | mandatory | The mode of the NGN service can be: standard(1) :NGN service is standard. numbergate(2) :NGN service is numbergate. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.3 | ColumnpicoNgnIfType | read-only | mandatory | The type of the NGN interface can be: global(1) :NGN interface type is global. private(2):NGN interface type is private. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.4 | ColumnpicoNgnStatus | read-only | mandatory | The state of the NGN SIP-UA register can be: notReady(1) :NGN service is not Ready. initializing(2):During initialization of the registration. registering(3) :… |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.5 | ColumnpicoNgnSipServerIpAddress | read-only | mandatory | The object of the SIP server address. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.6 | ColumnpicoNgnSipUri | read-only | mandatory | The object of the SIP URI. |
| 1.3.6.1.4.1.119.2.3.84.9.1.1.1.7 | ColumnpicoNgnUpTime | read-only | mandatory | The time elapsed since registered. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2 | TablepicoNgnVpnTable | not-accessible | mandatory | The table of the NGN VPN entry. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1 | RowpicoNgnVpnEntry | not-accessible | mandatory | Ngn VPN entry. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.1 | ColumnpicoNgnVpnIfIndex | not-accessible | mandatory | The interface index value of the interface for which NGN binding is enabled. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.2 | ColumnpicoNgnVpnStatus | read-only | mandatory | The state of the NGN SIP-UA session can be: disconnected(1):SIP session is disconnected. connecting(2) :SIP session is connecting. connected(3) :SIP session is… |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.3 | ColumnpicoNgnVpnPeerAddress | read-only | mandatory | The object of the NGN peer address. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.4 | ColumnpicoNgnVpnBandwidth | read-only | mandatory | The object of the NGN session bandwidth. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.5 | ColumnpicoNgnVpnUsedTime | read-only | mandatory | The time elapsed since this connected NGN session. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.6 | ColumnpicoNgnVpnSbcIpAddress | read-only | mandatory | The object of the NGN session SBC address. |
| 1.3.6.1.4.1.119.2.3.84.9.1.2.1.7 | ColumnpicoNgnVpnSbcPort | read-only | mandatory | The object of the NGN session SBC port. |
| 1.3.6.1.4.1.119.2.3.84.10 | NodepicoPostMIB | |||
| 1.3.6.1.4.1.119.2.3.84.10.1 | NodepicoPostMIBObjects | |||
| 1.3.6.1.4.1.119.2.3.84.10.1.1 | TablepicoPostTable | not-accessible | mandatory | The table of POST entry. |
| 1.3.6.1.4.1.119.2.3.84.10.1.1.1 | RowpicoPostEntry | not-accessible | mandatory | POST entry. |
| 1.3.6.1.4.1.119.2.3.84.10.1.1.1.1 | ColumnpicoPostIndex | read-only | mandatory | Unique index for each POST. |
| 1.3.6.1.4.1.119.2.3.84.10.1.1.1.2 | ColumnpicoPostFail | read-only | mandatory | POST fail information |
| 1.3.6.1.4.1.119.2.3.84.10.2 | NodepicoPostMIBNotificationPrefix | |||
| 1.3.6.1.4.1.119.2.3.84.10.2.0 | NodepicoPostMIBNotifications | |||
| 1.3.6.1.4.1.119.2.3.84.10.2.1 | NodepicoPostFailMessage | This trap/inform is sent to the manager whenever POST fail occured. | ||
| 1.3.6.1.4.1.119.2.3.84.11 | NodepicoMobileMIB | |||
| 1.3.6.1.4.1.119.2.3.84.11.1 | NodepicoMobileMIBObjects | |||
| 1.3.6.1.4.1.119.2.3.84.11.1.1 | TablepicoMobileDeviceTable | not-accessible | optional | The table of the Mobile device entry. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1 | RowpicoMobileDeviceEntry | not-accessible | optional | Mobile device entry. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.1 | ColumnpicoMobileDeviceIndex | not-accessible | optional | The unique index for each Mobile module. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.2 | ColumnpicoMobileDeviceVendorName | read-only | optional | The object of the vendor name. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.3 | ColumnpicoMobileDeviceName | read-only | optional | The object of the device name. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.4 | ColumnpicoMobileDeviceProductID | read-only | optional | The object of the product ID. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.5 | ColumnpicoMobileDeviceSoftwareVersion | read-only | optional | The object of the software version. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.6 | ColumnpicoMobileDeviceSignalBar | read-only | optional | The object of the signal bar. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.7 | ColumnpicoMobileDeviceSignalStrength | read-only | optional | The signal strength can be: unknown(-1) :signal strength is unknown out-range(0):signal strength is 0 weak(1) :signal strength is 1 low(2) :signal strength is … |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.8 | ColumnpicoMobileDeviceSignalQuality | read-only | optional | The object of the signal quality. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.9 | ColumnpicoMobileDeviceSignalElapsedTime | read-only | optional | The object of the elapsed time after signal acquiring. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.10 | ColumnpicoMobileDeviceRadioInterface | read-only | optional | The object of the radio interface. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.11 | ColumnpicoMobileDeviceCarrier | read-only | optional | The object of the carrier name. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.12 | ColumnpicoMobileDeviceDialerString | read-only | optional | The object of the dialer string. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.13 | ColumnpicoMobileDeviceDialStatus | read-only | optional | The dial status can be: disconnected(0):dial status is disconnected. connect(1) :dial status is connecting. cancel(2) :dial status is canceling. connected(3) :… |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.14 | ColumnpicoMobileDeviceInRangeCounts | read-only | optional | The in-range statistics. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.15 | ColumnpicoMobileDeviceOutRangeCounts | read-only | optional | The out-range statistics. |
| 1.3.6.1.4.1.119.2.3.84.11.1.1.1.16 | ColumnpicoMobileDeviceResetCounts | read-only | optional | The reset device statistics. |
| 1.3.6.1.4.1.119.2.3.84.11.2 | NodepicoMobileMIBNotificationPrefix | |||
| 1.3.6.1.4.1.119.2.3.84.11.2.0 | NodepicoMobileMIBNotifications | |||
| 1.3.6.1.4.1.119.2.3.84.11.2.1 | NodepicoMobileDeviceDown | This notification is port down status of USB device. | ||
| 1.3.6.1.4.1.119.2.3.84.11.2.2 | NodepicoMobileDeviceUp | This notification is port up status of USB device. | ||
| 1.3.6.1.4.1.119.2.3.84.11.2.3 | NodepicoMobileSignalStatusChange | This notification is the signal status changed. | ||
| 1.3.6.1.4.1.119.2.3.84.12 | NodepicoIPv4MIB | |||
| 1.3.6.1.4.1.119.2.3.84.12.1 | NodepicoIPv4Cache | |||
| 1.3.6.1.4.1.119.2.3.84.12.1.1 | ScalarpicoIPv4CacheEntries | read-only | mandatory | The number of current IPv4 cache. |
| 1.3.6.1.4.1.119.2.3.84.12.1.2 | ScalarpicoIPv4CachePeaks | read-only | mandatory | The peak value of IPv4 cache. |
| 1.3.6.1.4.1.119.2.3.84.12.1.3 | ScalarpicoIPv4CacheCreates | read-only | mandatory | The total count of created IPv4 cache. |
| 1.3.6.1.4.1.119.2.3.84.12.1.4 | ScalarpicoIPv4CacheOverflows | read-only | mandatory | The total count of IPv4 cache overflow. |
| 1.3.6.1.4.1.119.2.3.84.12.2 | NodepicoIPv4UFSCache | |||
| 1.3.6.1.4.1.119.2.3.84.12.2.1 | ScalarpicoIPv4UFSCacheEntries | read-only | mandatory | The number of current IPv4 UFS cache. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.12.2.2 | ScalarpicoIPv4UFSCachePeaks | read-only | mandatory | The peak value of IPv4 UFS cache. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.12.2.3 | ScalarpicoIPv4UFSCacheCreates | read-only | mandatory | The total count of created IPv4 UFS cache. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.12.2.4 | ScalarpicoIPv4UFSCacheOverflows | read-only | mandatory | The total count of IPv4 UFS cache overflow. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.13 | NodepicoIPv6MIB | |||
| 1.3.6.1.4.1.119.2.3.84.13.1 | NodepicoIPv6Cache | |||
| 1.3.6.1.4.1.119.2.3.84.13.1.1 | ScalarpicoIPv6CacheEntries | read-only | mandatory | The number of current IPv6 cache. |
| 1.3.6.1.4.1.119.2.3.84.13.1.2 | ScalarpicoIPv6CachePeaks | read-only | mandatory | The peak value of IPv6 cache. |
| 1.3.6.1.4.1.119.2.3.84.13.1.3 | ScalarpicoIPv6CacheCreates | read-only | mandatory | The total count of created IPv6 cache. |
| 1.3.6.1.4.1.119.2.3.84.13.1.4 | ScalarpicoIPv6CacheOverflows | read-only | mandatory | The total count of IPv6 cache overflow. |
| 1.3.6.1.4.1.119.2.3.84.13.2 | NodepicoIPv6UFSCache | |||
| 1.3.6.1.4.1.119.2.3.84.13.2.1 | ScalarpicoIPv6UFSCacheEntries | read-only | mandatory | The number of current IPv6 UFS cache. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.13.2.2 | ScalarpicoIPv6UFSCachePeaks | read-only | mandatory | The peak value of IPv6 UFS cache. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.13.2.3 | ScalarpicoIPv6UFSCacheCreates | read-only | mandatory | The total count of created IPv6 UFS cache. If UFS cache is disable, this value is 0. |
| 1.3.6.1.4.1.119.2.3.84.13.2.4 | ScalarpicoIPv6UFSCacheOverflows | read-only | mandatory | The total count of IPv6 UFS cache overflow. If UFS cache is disable, this value is 0. |