PRVT-CES-MIB
113 objects
This module includes configuration parameters for DS1 modules not included in DS1-MIB.
Imported Objects
| DS1-MIB | dsx1ConfigEntry |
| PRVT-SWITCH-MIB | switch |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.5.111 | IdentityprvtCESMib | This module includes configuration parameters for DS1 modules not included in DS1-MIB. | ||
| 1.3.6.1.4.1.738.1.5.111.0 | NodeprvtCESNotifications | |||
| 1.3.6.1.4.1.738.1.5.111.0.1 | NotificationprvtCESDsx1Alarm | current | This notification is sent when the value of a TDM port error condition statistic has exceeded the configured threshold. | |
| 1.3.6.1.4.1.738.1.5.111.0.2 | NotificationprvtCESModuleAvailable | current | prvtCESModuleAvailable trap | |
| 1.3.6.1.4.1.738.1.5.111.0.3 | NotificationprvtCESModuleUnAvailableDueExtract | current | prvtCESModuleUnAvailableDueExtract trap. | |
| 1.3.6.1.4.1.738.1.5.111.0.4 | NotificationprvtCESModuleUnAvailableDueReload | current | prvtCESModuleUnAvailableDueReload trap | |
| 1.3.6.1.4.1.738.1.5.111.1 | NodeprvtCESObjects | |||
| 1.3.6.1.4.1.738.1.5.111.1.1 | TableprvtCESDsx1ExtTable | not-accessible | current | This table contains object for configuring DS1 interfaces, not supported in dsx1ConfigTable. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1 | RowprvtCESDsx1ExtEntry | not-accessible | current | prvtCESDsx1ExtEntry |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.1 | ColumnprvtCESE1Impedance | read-write | current | This object configures temination impedance for TDM ports if the line type is E1. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.2 | ColumnprvtCEST1GainLimit | read-write | current | This object configures Tx or Rx gain limit for TDM ports if the line type is T1. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.3 | ColumnprvtCESPortShutdown | read-write | current | Shutdown TDM port. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.4 | ColumnprvtCESPortLineType | read-write | current | Additional line types. For reference see object dsx1LineType |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.5 | ColumnprvtCEST1LongCableLength | read-write | current | Long cable length options for T1 mode. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.6 | ColumnprvtCESPortOperStatus | read-only | current | TDM link state. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.7 | ColumnprvtCESClearPortStatistics | read-write | current | Clear port statistics. |
| 1.3.6.1.4.1.738.1.5.111.1.1.1.8 | ColumnprvtCESServiceClock | read-write | current | Service Clock available only for DS1 interface. |
| 1.3.6.1.4.1.738.1.5.111.1.2 | TableprvtCESModuleConfTable | not-accessible | current | This table contains object for configuring options that are applied to the entire module. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1 | RowprvtCESModuleConfEntry | not-accessible | current | prvtCESModuleConfEntry |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.1 | ColumnprvtCESModuleIndex | accessible-for-notify | current | Index of each CES module installed. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.2 | ColumnprvtCESModuleLineType | read-write | current | Line mode for the module. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.3 | ColumnprvtCESModuleTxClock | read-write | current | Configures Transmit Source Clock for the module. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.4 | ColumnprvtCESModuleTxBackupClock | read-write | current | Configures Backup Clock for the module. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.5 | ColumnprvtCESModuleConfig | read-write | current | When this object is set to applyConfiguration(2), the module is restarted and the changes in dsx1ConfigTable or prvtCESConfTable are applied. The object must b… |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.6 | ColumnprvtCESModuleIPAddress | read-write | current | The CES Module IP address after configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.7 | ColumnprvtCESModuleIPAddressMask | read-write | current | The CES Module IP address mask after configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.8 | ColumnprvtCESModuleGateway | read-write | current | CES Module Gateway after configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.9 | ColumnprvtCESModuleUpTime | read-only | current | CES Up Time |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.10 | ColumnprvtCESModuleMACAddress | read-only | current | CES MAC Address |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.11 | ColumnprvtCESModuleHardwareRevision | read-only | current | CES Hardware revision |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.12 | ColumnprvtCESModuleFirmwareVersion | read-only | current | CES Firmware revision |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.13 | ColumnprvtCESModuleClearCircuitStatistics | read-write | current | Clear circuits statistics. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.14 | ColumnprvtCESModuleLbit | read-write | current | Enable/disable L bit set upon AIS defect detection, in structure agnostic mode. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.15 | ColumnprvtCESModulePolicyLops | read-write | current | Controls policy lops. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.16 | ColumnprvtCESModulePolicyLbit | read-write | current | Controls policy lbit. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.17 | ColumnprvtCESModulePolicyRbit | read-write | current | Controls policy rbit. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.18 | ColumnprvtCESModulePolicyRd | read-write | current | Controls policy rd. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.19 | ColumnprvtCESModulePolicyIdlePattern | read-write | current | Controls policy idle pattern. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.20 | ColumnprvtCESModulePolicyIdleSignalling | read-write | current | Controls policy idle signalling. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.21 | ColumnprvtCESModulePolicyLopsEnter | read-write | current | Controls the number of consecutive missed packets required to enter LOPS state. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.22 | ColumnprvtCESModulePolicyLopsExit | read-write | current | Controls the number of consecutive missed packets required to exit LOPS state. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.23 | ColumnprvtCESModulePolicyuUnstrLbit | read-write | current | If a packet is received with L bit set, and the payload is present (not suppressed), one of the following is sent to the TDM line, according to a globally conf… |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.24 | ColumnprvtCESModulePolicyuStrReplace | read-write | current | If a missing packet is detected, one of the following is sent to the TDM line, according to a globally configurable structured missing packet replacement polic… |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.25 | ColumnprvtCESModulePolicyuUnstrReplace | read-write | current | If a missing packet is detected, one of the following is sent to the TDM line, according to a globally configurable unstructured missing packet replacement pol… |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.26 | ColumnprvtCESModulePolicyuUnstrLops | read-write | current | If a CES circuit enters the LOPS state, one of the following is sent to the TDM line, according to a globally configurable unstructured missing packet replacem… |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.27 | ColumnprvtCESModuleServiceClock | read-write | current | Clock mode for CES module |
| 1.3.6.1.4.1.738.1.5.111.1.2.1.28 | ColumnprvtCESModulePolicyuUnstrReplacePattern | read-write | current | Unstructured packet replace policy pattern number |
| 1.3.6.1.4.1.738.1.5.111.1.3 | TableprvtCESUnappTable | not-accessible | current | This table displays CES module configuration which will take effect after prvtCESModuleConf is set to applyConfiguration(2). |
| 1.3.6.1.4.1.738.1.5.111.1.3.1 | RowprvtCESUnappEntry | not-accessible | current | prvtCESUnappEntry |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.1 | ColumnprvtCESUnappLineType | read-only | current | The value of dsx1LineType before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.2 | ColumnprvtCESUnappLineCoding | read-only | current | The value of dsx1LineCoding before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.3 | ColumnprvtCESUnappLoopbackConfig | read-only | current | The value of dsx1LoopbackConfig before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.4 | ColumnprvtCESUnappSignalMode | read-only | current | The value of dsx1SignalMode before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.5 | ColumnprvtCESUnappTransmitClockSource | read-only | current | The value of dsx1TransmitClockSource before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.6 | ColumnprvtCESUnappTransmitClockBackup | read-only | current | The value of dsx1TransmitClockBackup before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.7 | ColumnprvtCESUnappLineLength | read-only | current | The value of dsx1LineLength before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.8 | ColumnprvtCESUnappLineMode | read-only | current | The value of dsx1LineMode before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.9 | ColumnprvtCESUnappLineBuildOut | read-only | current | The value of dsx1LineBuildOut before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.10 | ColumnprvtCESUnappE1Impedance | read-only | current | The value of prvtCESE1Impedance before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.11 | ColumnprvtCESUnappT1GainLimit | read-only | current | The value of prvtCEST1GainLimit before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.12 | ColumnprvtCESUnappIPAddress | read-only | current | The CES Module IP address before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.13 | ColumnprvtCESUnappIPAddressMask | read-only | current | The CES Module IP address mask before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.3.1.14 | ColumnprvtCESUnappGateway | read-only | current | The CES Module Gateway before configuration is applied. |
| 1.3.6.1.4.1.738.1.5.111.1.4 | TableprvtCESDsx1AlarmTable | not-accessible | current | This table contains object for configuring and displaying TDM ports TCA thresholds. |
| 1.3.6.1.4.1.738.1.5.111.1.4.1 | RowprvtCESDsx1AlarmEntry | not-accessible | current | prvtCESDsx1AlarmEntry |
| 1.3.6.1.4.1.738.1.5.111.1.4.1.1 | ColumnprvtCESDsx1AlarmPort | not-accessible | current | The DS1 port for which this alarm is configured. |
| 1.3.6.1.4.1.738.1.5.111.1.4.1.2 | ColumnprvtCESDsx1AlarmIndex | not-accessible | current | An integer uniquely identifying an alarm entry. |
| 1.3.6.1.4.1.738.1.5.111.1.4.1.3 | ColumnprvtCESDsx1AlarmVariable | read-only | current | The OID of the variable whose value is being monitored. Depending on the time interval, the error condition and the ifIndex of the TDM interface, this points t… |
| 1.3.6.1.4.1.738.1.5.111.1.4.1.4 | ColumnprvtCESDsx1AlarmThreshold | read-write | current | The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the object pointed by prvtCESDsx1AlarmVariable remains above this th… |
| 1.3.6.1.4.1.738.1.5.111.1.4.1.5 | ColumnprvtCESDsx1AlarmValue | accessible-for-notify | current | The value of the object pointed to by prvtCESDsx1AlarmVariable, present for notification purposes. |
| 1.3.6.1.4.1.738.1.5.111.1.5 | ScalarprvtCESAlarmMonitor | read-write | current | CES alarm monitor |
| 1.3.6.1.4.1.738.1.5.111.1.6 | TableprvtCESCICTable | not-accessible | current | This table contains objects for configuring Clock Input Controller. |
| 1.3.6.1.4.1.738.1.5.111.1.6.1 | RowprvtCESCICEntry | not-accessible | current | prvtCESCICEntry |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.1 | ColumnprvtCESCICModuleId | not-accessible | current | Slot of CES module installed. |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.2 | ColumnprvtCESCICNumber | not-accessible | current | An integer uniquely identifying a Clock Input Controller. |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.3 | ColumnprvtCESCICClockNumber | read-only | current | This variable indicates the index of the clock the clock input controller belongs to |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.4 | ColumnprvtCESCICMode | read-only | current | The mode of the clock input controller. Not all clock input controllers support all modes. The clock input controller status is 'locked' only if the clock inpu… |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.5 | ColumnprvtCESCICTdmPort | read-write | current | If the clock input controller recovers a clock from a port , this variable indicates the TDM Port. Otherwise, it must be set to zero. |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.6 | ColumnprvtCESCICCircuit | read-write | current | If the clock input controller recovers a clock from a circuit, this variable indicates the circuit ID. Otherwise, it must be set to zero. |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.7 | ColumnprvtCESCICStatus | read-only | current | The status of the input reference.Reference is ok when the status is 'locked'. Otherwise, the status is 'notLocked'. Alternatively, if an error was detected at… |
| 1.3.6.1.4.1.738.1.5.111.1.6.1.8 | ColumnprvtCESCICState | read-only | current | The state is set to 'active' if the input controller was selected by the clock to drive the clock output. At least one input out of the clock-input-controllers… |
| 1.3.6.1.4.1.738.1.5.111.1.7 | TableprvtCESCICMappTable | not-accessible | current | This table contains clock configuration and status monitoring information. |
| 1.3.6.1.4.1.738.1.5.111.1.7.1 | RowprvtCESCICMappEntry | not-accessible | current | prvtCESCICMappEntry |
| 1.3.6.1.4.1.738.1.5.111.1.7.1.1 | ColumnprvtCESCICMappModuleId | read-only | current | Slot of CES module installed. |
| 1.3.6.1.4.1.738.1.5.111.1.7.1.2 | ColumnprvtCESCICMappClockNumber | read-only | current | Index for the conceptual row identifying a clock within this mapping table |
| 1.3.6.1.4.1.738.1.5.111.1.7.1.3 | ColumnprvtCESCICMappCICNumber | read-only | current | Index for the conceptual row identifying a clock input within this mapping table |
| 1.3.6.1.4.1.738.1.5.111.1.7.1.4 | ColumnprvtCESCICMappState | read-only | current | The state is set to 'active' if the input controller was selected by the clock to drive the clock output. At least one input out of the clock-input-controllers… |
| 1.3.6.1.4.1.738.1.5.111.1.8 | TableprvtCESApsTable | not-accessible | current | This table contains objects needed APS configuration |
| 1.3.6.1.4.1.738.1.5.111.1.8.1 | RowprvtCESApsEntry | not-accessible | current | prvtCESApsEntry |
| 1.3.6.1.4.1.738.1.5.111.1.8.1.1 | ColumnprvtCESApsModuleId | not-accessible | current | An integer uniquely identifying slot of the CES module installed |
| 1.3.6.1.4.1.738.1.5.111.1.8.1.2 | ColumnprvtCESApsEnable | read-write | current | Enable/Disable Automatic Protection Switching |
| 1.3.6.1.4.1.738.1.5.111.1.8.1.3 | ColumnprvtCESApsActiveLine | read-write | current | APS active line |
| 1.3.6.1.4.1.738.1.5.111.1.8.1.4 | ColumnprvtSdBerThreshold | read-write | current | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.738.1.5.111.1.8.1.5 | ColumnprvtSfBerThreshold | read-write | current | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.738.1.5.111.1.9 | TableprvtCESUpdateFirmwareTable | not-accessible | current | This table contains object needed in update firmware of CES module |
| 1.3.6.1.4.1.738.1.5.111.1.9.1 | RowprvtCESUpdateFirmwareEntry | not-accessible | current | prvtCESUpdateFirmwareEntry |
| 1.3.6.1.4.1.738.1.5.111.1.9.1.1 | ColumnprvtCESModuleId | not-accessible | current | An integer uniquely identifying slot of the CES module installed |
| 1.3.6.1.4.1.738.1.5.111.1.9.1.2 | ColumnprvtCESFirmwareImageName | read-write | current | Name of the firmware image file |
| 1.3.6.1.4.1.738.1.5.111.1.9.1.3 | ColumnprvtCESUpdateAction | read-write | current | Update CES firmware |
| 1.3.6.1.4.1.738.1.5.111.1.9.1.4 | ColumnprvtCESUpdateStatus | read-only | current | The status of the last update procedure, if any. This object will have a value of updateStatusUnknown(2) if no update process has been performed. |
| 1.3.6.1.4.1.738.1.5.111.1.9.1.5 | ColumnprvtCESTFTPServer | read-write | current | IP Address of Tftp Server |
| 1.3.6.1.4.1.738.1.5.111.2 | NodeprvtCESConformance | |||
| 1.3.6.1.4.1.738.1.5.111.2.1 | NodeprvtCESDsx1Compliances | |||
| 1.3.6.1.4.1.738.1.5.111.2.1.1 | ComplianceprvtCESDsx1Compliance | current | The compliance statement for management of TDM ports. | |
| 1.3.6.1.4.1.738.1.5.111.2.2 | NodeprvtCESDsx1Groups | |||
| 1.3.6.1.4.1.738.1.5.111.2.2.1 | GroupprvtCESDsx1NotificationsGroup | current | The group of supported notifications. | |
| 1.3.6.1.4.1.738.1.5.111.2.2.2 | GroupprvtCESDsx1ROGroup | read-write | current | The group of objects with MAX-ACCESS read-write supported with read-only access for the first release. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CESLineType | INTEGER { e1(1), t1(2), e1-sdh(3), t1-sdh(4), t1-sonet(5) } | current | This value is used to configure the line mode common for all TDM ports of the module. |
| ConfigAction | INTEGER { noop(1), applyConfiguration(2), rejectConfiguration(3), restart(4) } | current | This value is used to specify what is to be done with unapplied CES module configuration. |
| E1Impedance | INTEGER { notApplicable(0), e1-75ohm(1), e1-75hrl(2), e1-120ohm(3), e1-120hrl(4) } | current | This value is used to configure E1 line type termination impedance. |
| ServiceClock | INTEGER{ notAplicable(0), loopTiming (1), localTiming (2), adaptive (3), differntial (4) } | current | This values are used to configure transmit clock as one of this modes. |
| T1GainLimit | INTEGER { notApplicable(0), none(1), gain30(2), gain36(3) } | current | This value is used to configure T1 type Tx or Rx gain limit. |
| T1LongCableLength | INTEGER { notApplicable (1), neg75dB (2), neg15dB (3), neg225dB (4), zerodB (5) } | current | This value is used to configure T1 long cable length. |