PRVT-RING-EPS-MIB
101 objects
This private MIB provides capability of controlling the automatic Ring Ethernet Protection Switching (ITU-T G.8032)
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMDLevelOrNone Dot1agCfmMepIdOrZero |
| IF-MIB | InterfaceIndexOrZero |
| PRVT-SWITCH-MIB | switch |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMPv2-CONF | -- RFC2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 TEXTUAL-CONVENTION DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.5.134 | IdentityprvtRingEpsMib | This private MIB provides capability of controlling the automatic Ring Ethernet Protection Switching (ITU-T G.8032) | ||
| 1.3.6.1.4.1.738.1.5.134.0 | NodeprvtRingEpsNotifications | |||
| 1.3.6.1.4.1.738.1.5.134.0.1 | NotificationprvtRingEpsDefectAlarm | current | This trap will be sent by any instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as… | |
| 1.3.6.1.4.1.738.1.5.134.0.2 | NotificationprvtRingEpsSwitchoverAlarm | current | This trap will be sent by any instance when it changes state. The management entity receiving the notification can identify the system from the network source … | |
| 1.3.6.1.4.1.738.1.5.134.0.3 | NotificationprvtRingEpsSubRingDefectAlarm | current | This trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is ident… | |
| 1.3.6.1.4.1.738.1.5.134.0.4 | NotificationprvtRingEpsSubRingSwitchoverAlarm | current | This trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network… | |
| 1.3.6.1.4.1.738.1.5.134.1 | NodeprvtRingEpsObjects | |||
| 1.3.6.1.4.1.738.1.5.134.1.1 | NodeprvtRingEpsInstances | |||
| 1.3.6.1.4.1.738.1.5.134.1.1.1 | TableprvtRingEpsInstanceTable | not-accessible | current | This table includes information about the ring instances defined on this node. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1 | RowprvtRingEpsInstanceEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.1 | ColumnprvtRingEpsInstanceIndex | not-accessible | current | RAPS instance index |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.2 | ColumnprvtRingEpsMode | read-create | current | Version of the protocol the instance will use |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.3 | ColumnprvtRingEpsNodeRole | read-create | current | This variable identifies the role that the node will play inside the ring. The node can have two special roles, RPL owner or RPL neighbor, when one of its port… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.4 | ColumnprvtRingEpsState | read-only | current | This variable identifies the state of the ring node according to the standard state machine. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.5 | ColumnprvtRingEpsLocalCommand | read-create | current | The user can control the ring using a set of commands allowing blocking and unblocking of ports. These commands are rapsLcManualSwitch, rapsLcForcedSwitch and … |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.6 | ColumnprvtRingEpsControlVlan | read-create | current | The vlan ID used for RAPS & CFM traffic. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.7 | ColumnprvtRingEpsPort0Ifindex | read-create | current | This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the ring as port… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.8 | ColumnprvtRingEpsPort1Ifindex | read-create | current | This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the ring as port… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.9 | ColumnprvtRingEpsRplPort | read-create | current | This object controls whether the one of the ring ports is designated as RPL for the ring or not. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.10 | ColumnprvtRingEpsManualSwitchPort | read-create | current | The port blocked by the Manual Switch command |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.11 | ColumnprvtRingEpsCfmMdLevel | read-create | current | Value of the CFM MD level where the protected domain is situated |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.12 | ColumnprvtRingEpsPort0Mep | read-create | current | This variable is the peer MEP ID that should send CCMs towards port 0. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.13 | ColumnprvtRingEpsPort1Mep | read-create | current | This variable is the peer MEP ID that should send CCMs towards port 1. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.14 | ColumnprvtRingEpsRevertive | read-create | current | This is the MI_RAPS_Revertive variable defined in the standard. It controls whether the RPL is blocked again after a failure of some ring link recovers. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.15 | ColumnprvtRingEpsNoVirtualChannel | read-create | current | Node is part of a subring that doesn't use RAPS virtual channel |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.16 | ColumnprvtRingEpsHoldOffTimer | read-create | current | Range is from 0 to 10 seconds in 100msec intervals |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.17 | ColumnprvtRingEpsWaitToRestoreTimer | read-create | current | Range is from 1 to 12 minutes |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.18 | ColumnprvtRingEpsGuardTimer | read-create | current | Range is from 10msec to 2 seconds in 10msec intervals |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.19 | ColumnprvtRingEpsWaitToBlockTimer | read-only | current | Range is from 5010msec to 7 seconds in 10msec intervals. This time is actulally the Guard Timer + 5 seconds |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.20 | ColumnprvtRingEpsDefectFop | read-only | current | So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RP… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.21 | ColumnprvtRingEpsPort0Status | read-only | current | This variable reflects the state of port 0. It can be either Ok (unblocked), Blocked or Failed. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.22 | ColumnprvtRingEpsPort1Status | read-only | current | This variable reflects the state of port 1. It can be either Ok (unblocked), Blocked or Failed. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.23 | ColumnprvtRingEpsPort0PeerNodeId | read-only | current | This variable reflects the Node ID from the RAPS packet received via port 0. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.24 | ColumnprvtRingEpsPort1PeerNodeId | read-only | current | This variable reflects the Node ID from the RAPS packet received via port 1. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.25 | ColumnprvtRingEpsPort0PeerCommand | read-only | current | This variable reflects the Request/State of the RAPS packet received via port 0. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.26 | ColumnprvtRingEpsPort1PeerCommand | read-only | current | This variable reflects the Request/State of the RAPS packet received via port 1. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.27 | ColumnprvtRingEpsPort0PeerStatus | read-only | current | This variable reflects the status field of the RAPS packet received via port 0. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.28 | ColumnprvtRingEpsPort1PeerStatus | read-only | current | This variable reflects the status field of the RAPS packet received via port 1. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.29 | ColumnprvtRingEpsOperationalStatus | read-only | current | The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the i… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.30 | ColumnprvtRingEpsAdminStatus | read-create | current | Administrative status of the instance |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.31 | ColumnprvtRingEpsRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.32 | ColumnprvtRingEpsForcedSwitchPort | read-create | current | The port blocked by the Forced Switch command |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.33 | ColumnprvtRingEpsInstanceDescription | read-create | current | RAPS instance description. |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.34 | ColumnprvtRingEpsRingId | read-create | current | The last octet of the RAPS destination MAC address is designated as Ring ID (01-19-A7-00-00-[Ring ID]). As of G.8032v2 the destination MAC address '01-19-A7-00… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.35 | ColumnprvtRingEpsPort0MonitoringMethod | read-write | current | Raps monitoring methods for port 0: ccm - CCM messages and link status will be used for raps monitoring, link-status -Link status will be used for raps monitor… |
| 1.3.6.1.4.1.738.1.5.134.1.1.1.1.36 | ColumnprvtRingEpsPort1MonitoringMethod | read-write | current | Raps monitoring methods for port 1: ccm - CCM messages and link status will be used for raps monitoring, link-status - Link status will be used for raps monito… |
| 1.3.6.1.4.1.738.1.5.134.1.2 | NodeprvtRingEpsVlans | |||
| 1.3.6.1.4.1.738.1.5.134.1.2.1 | TableprvtRingEpsVlanTable | not-accessible | current | This table includes information about protected vlans and the ring instances that monitor them. |
| 1.3.6.1.4.1.738.1.5.134.1.2.1.1 | RowprvtRingEpsVlanEntry | not-accessible | current | Connection between vlan IDs and the RAPS instance that monitors them |
| 1.3.6.1.4.1.738.1.5.134.1.2.1.1.1 | ColumnprvtRingEpsVlanIndex | not-accessible | current | The vlan ID. |
| 1.3.6.1.4.1.738.1.5.134.1.2.1.1.2 | ColumnprvtRingEpsInstance | read-create | current | RAPS instance that will monitor this vlan |
| 1.3.6.1.4.1.738.1.5.134.1.2.1.1.3 | ColumnprvtRingEpsVlanRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.738.1.5.134.1.3 | NodeprvtRingEpsSubRings | |||
| 1.3.6.1.4.1.738.1.5.134.1.3.1 | TableprvtRingEpsSubRingTable | not-accessible | current | Table containing information about the subring instances defined on this node. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1 | RowprvtRingEpsSubRingEntry | not-accessible | current | Configuration of a subring that is interconnected to the main ring in an interconnection node |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.1 | ColumnprvtRingEpsSubRingIndex | not-accessible | current | A subring ID |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.2 | ColumnprvtRingEpsSubRingNodeRole | read-create | current | This variable identifies the role that the node will play inside the subring. The node can have two special roles, RPL owner or RPL neighbor, when the subring … |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.3 | ColumnprvtRingEpsSubRingState | read-only | current | This variable identifies the state of the subring node according to the standard state machine. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.4 | ColumnprvtRingEpsSubRingLocalCommand | read-create | current | The user can control the ring using a set of commands allowing blocking and unblocking of ports. These commands are rapsLcManualSwitch, rapsLcForcedSwitch and … |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.5 | ColumnprvtRingEpsSubRingPortIfindex | read-create | current | This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the subring. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.6 | ColumnprvtRingEpsSubRingPortMep | read-create | current | This variable is the peer MEP ID that should send CCMs towards the subring port. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.7 | ColumnprvtRingEpsSubRingRplPort | read-create | current | This object controls whether the subring port is designated as RPL for the subring or not. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.8 | ColumnprvtRingEpsSubRingVirtualChannelVlan | read-create | current | The vlan ID used for Virtual Channel encapsulation |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.9 | ColumnprvtRingEpsSubRingRevertive | read-create | current | This is the MI_RAPS_Revertive variable defined in the standard. It controls whether the RPL is blocked again after a failure of some subring link recovers. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.10 | ColumnprvtRingEpsSubRingHoldOffTimer | read-create | current | Range is from 0 to 10 seconds in 100msec intervals |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.11 | ColumnprvtRingEpsSubRingWaitToRestoreTimer | read-create | current | Range is from 1 to 12 minutes |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.12 | ColumnprvtRingEpsSubRingGuardTimer | read-create | current | Range is from 10msec to 2 seconds in 10msec intervals |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.13 | ColumnprvtRingEpsSubRingWaitToBlockTimer | read-only | current | Range is from 5010msec to 7 seconds in 10msec intervals. This time is actulally the Guard Timer + 5 seconds |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.14 | ColumnprvtRingEpsSubRingDefectFop | read-only | current | So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RP… |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.15 | ColumnprvtRingEpsSubRingPortStatus | read-only | current | This variable reflects the state of the subring port. It can be either Ok (unblocked), Blocked or Failed. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.16 | ColumnprvtRingEpsSubRingPortPeerNodeId | read-only | current | This variable reflects the Node ID from the RAPS packet received via the subring port. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.17 | ColumnprvtRingEpsSubRingPeerCommand | read-only | current | This variable reflects the Request/State of the RAPS packet received via the subring port. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.18 | ColumnprvtRingEpsSubRingPeerStatus | read-only | current | This variable reflects the status field of the RAPS packet received via the subring port. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.19 | ColumnprvtRingEpsSubRingVcPeerNodeId | read-only | current | This variable reflects the Node ID from the RAPS packet received via the virtual channel. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.20 | ColumnprvtRingEpsSubRingVcPeerCommand | read-only | current | This variable reflects the Request/State of the RAPS packet received via the virtual channel. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.21 | ColumnprvtRingEpsSubRingVcPeerStatus | read-only | current | This variable reflects the status field of the RAPS packet received via the virtual channel. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.22 | ColumnprvtRingEpsSubRingPropagateTC | read-create | current | This is the MI_RAPS_Propagate_TC variable mentioned in the standard. If this is enabled a flush in the subring will be followed by a flush in the main instance. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.23 | ColumnprvtRingEpsSubRingOperationalStatus | read-only | current | The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the i… |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.24 | ColumnprvtRingEpsSubRingAdminStatus | read-create | current | Administrative status of the subring instance |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.25 | ColumnprvtRingEpsSubRingRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.26 | ColumnprvtRingEpsSubRingControlVlan | read-create | current | The vlan ID used for RAPS & CFM traffic. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.27 | ColumnprvtRingEpsSubRingDescription | read-create | current | RAPS instance sub-ring description. |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.28 | ColumnprvtRingEpsSubRingRingId | read-create | current | The last octet of the RAPS destination MAC address is designated as Ring ID (01-19-A7-00-00-[Ring ID]). As of G.8032v2 the destination MAC address '01-19-A7-00… |
| 1.3.6.1.4.1.738.1.5.134.1.3.1.1.29 | ColumnprvtRingEpsSubRingMonitoringMethod | read-write | current | Raps monitoring methods for subring port: ccm - CCM messags and link status will be used for raps monitoring, link-status -Link status will be used for raps mo… |
| 1.3.6.1.4.1.738.1.5.134.2 | NodeprvtRingEpsConformance | |||
| 1.3.6.1.4.1.738.1.5.134.2.1 | NodeprvtRingEpsCompliances | |||
| 1.3.6.1.4.1.738.1.5.134.2.1.1 | ComplianceprvtRingEpsCompliance | current | The compliance statement for support of the Ring EPS MIB module. | |
| 1.3.6.1.4.1.738.1.5.134.2.2 | NodeprvtRingEpsGroups | |||
| 1.3.6.1.4.1.738.1.5.134.2.2.1 | GroupprvtRingEpsGroup | current | Objects for the RAPS instances group. | |
| 1.3.6.1.4.1.738.1.5.134.2.2.2 | GroupprvtRingEpsVlanGroup | current | Objects for the RAPS monitored vlans group. | |
| 1.3.6.1.4.1.738.1.5.134.2.2.3 | GroupprvtRingEpsSubRingGroup | current | Objects for the RAPS subring group. | |
| 1.3.6.1.4.1.738.1.5.134.2.2.4 | GroupprvtRingEpsNotificationsGroup | current | Objects for the Notifications group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrvtRingEpsDefectType | BITS { rapsDprovisioningMismatch (0) } | current | Ring port designated as RPL (only valid if prvtRingEpsNodeRole is rapsNrRplOwner or rapsNrRplNeighborNode |
| PrvtRingEpsLocalCommandType | INTEGER { rapsLcNoRequest (0), rapsLcExercise (1), rapsLcManualSwitch (2), rapsLcSignalDegrade (3), rapsLcSignalFail (4), rapsLcForcedSwitch (5), rapsLcClear (6), rapsLcLockoutOfProtection (7) } | current | Local system state given by the top priority command received |
| PrvtRingEpsModeType | INTEGER { rapsMode8032v1 (1), rapsMode8032v2 (2) } | current | Version of the protocol the instance will use |
| PrvtRingEpsNodeRoleType | INTEGER { rapsNrSimpleNode (0), rapsNrRplNeighborNode (1), rapsNrRplOwner (2) } | current | Role of the defined node inside the protected ring |
| PrvtRingEpsPeerStatusType | BITS { bRplBlocked(0), bDoNotFlush(1), bBlockedPortReference(2) } | current | Status bits set in the received RAPS packet. The meanings are: bRplBlocked(0) The RPL link is blocked by the RPL owner. bDoNotFlush(1) RAPS sender requests that we do don flush our FDB. bBlockedPortReference(2) The port… |
| PrvtRingEpsPortStatusType | INTEGER { rapsPsOk (0), rapsPsBlocked (1), rapsPsFailed (2) } | current | Status of the port link |
| PrvtRingEpsRemoteRequestType | INTEGER { rapsRsNone (-1), rapsRsNoRequest (0), rapsRsManualSwitch (7), rapsRsSignalFail (11), rapsRsForcedSwitch (13), rapsRsEvent (14) } | current | Remote command received via RAPS packets |
| PrvtRingEpsRplPortType | INTEGER { port0 (0), port1 (1), none (2) } | current | Ring port designated as RPL (only valid if prvtRingEpsNodeRole is rapsNrRplOwner or rapsNrRplNeighborNode |
| PrvtRingEpsStateType | INTEGER { rapsInit (0), rapsIdle (1), rapsProtection (2), rapsManualSwitch (3), rapsForcedSwitch (4), rapsPending (5) } | current | State of the R-APS request processing logic |