PW-ATM-R-MIB
89 objects
This MIB contains managed object definitions for Pseudo Wire emulation of ATM over Packet Switched Networks (PSN). This MIB supplements the PW-STD-MIB module. The PW-STD-MIB contains structures and MIB associations generic to Pseudo-Wire (PW) emulation. PW-specific MIBs (such as this) contain config and stats for specific PW types. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices. note
Imported Objects
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| PW-STD-R-MIB | pwIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.20 | NoderadExperimental | |||
| 1.20.16 | IdentitypwAtmMIBR | This MIB contains managed object definitions for Pseudo Wire emulation of ATM over Packet Switched Networks (PSN). This MIB supplements the PW-STD-MIB module. … | ||
| 1.20.16.0 | NodepwAtmNotifications | |||
| 1.20.16.1 | NodepwAtmObjects | |||
| 1.20.16.1.1 | TablepwAtmOutboundTable | not-accessible | current | This table specifies the information for an ATM PW to be carried over PSN in the outbound direction. An entry is created in this table for every entry in the p… |
| 1.20.16.1.1.1 | RowpwAtmOutboundEntry | not-accessible | current | A row in this table represents an ATM PW that needs to be adapted and carried over PSN. This table is indexed by pwIndex from pwTable. All objects in this tabl… |
| 1.20.16.1.1.1.1 | ColumnpwAtmOutboundAtmIf | read-create | current | The ATM Interface that receives cells from the ATM network. |
| 1.20.16.1.1.1.2 | ColumnpwAtmOutboundVpi | read-create | current | VPI value of this ATM PW. The value may indicate the translated value when egress generates new VPI. |
| 1.20.16.1.1.1.3 | ColumnpwAtmOutboundVci | read-create | current | VCI value of this ATM PW. The value may indicate the translated value when egress generates new VCI. |
| 1.20.16.1.1.1.4 | ColumnpwAtmOutboundTrafficParamDescr | read-create | current | This object represents a pointer to an ATM traffic parameter specification table which will be employed while receiving cells from the ATM network. This table … |
| 1.20.16.1.1.1.5 | ColumnpwAtmOutboundRowStatus | read-create | current | This Object is used to create, modify or delete a row in this table. |
| 1.20.16.1.3 | TablepwAtmInboundTable | not-accessible | current | This table specifies the information for an ATM PW in the Inbound direction. |
| 1.20.16.1.3.1 | RowpwAtmInboundEntry | not-accessible | current | A row in this table represents an ATM PW that needs to be sent into the ATM Network after reconstructing cells from Packets received from a PSN. This table is … |
| 1.20.16.1.3.1.1 | ColumnpwAtmInboundAtmIf | read-create | current | The ATM Interface that sends cells into the ATM network after reconstructing cells from packets received from a PSN. |
| 1.20.16.1.3.1.2 | ColumnpwAtmInboundVpi | read-create | current | VPI value of this ATM PW. If the pwType is atmNto1Transparent then the value will be set to zero. |
| 1.20.16.1.3.1.3 | ColumnpwAtmInboundVci | read-create | current | VCI value of this ATM PW. If the pwType is atmNto1Transparent atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero. |
| 1.20.16.1.3.1.4 | ColumnpwAtmInboundTrafficParamDescr | read-create | current | This object represents a pointer to a ATM traffic parameter specification table which will be employed while transmit into the ATM network. This table contains… |
| 1.20.16.1.3.1.5 | ColumnpwAtmInboundRowStatus | read-create | current | This Object is used to create, modify or delete a row in this table. |
| 1.20.16.1.5 | TablepwAtmCfgTable | not-accessible | current | This table specifies generic information for an ATM PW to be carried over PSN in any mode. |
| 1.20.16.1.5.1 | RowpwAtmCfgEntry | not-accessible | current | This table contains a set of parameters for the ATM PW that needs to be adapted and carried over PSN. This table is indexed by pwIndex from pwTable. Unless oth… |
| 1.20.16.1.5.1.1 | ColumnpwAtmCfgMaxCellConcatenation | read-write | current | The maximum number of ATM cells that can be concatenated into one PW packet towards PSN. In non LDP or other signaling protocol environment, this object might … |
| 1.20.16.1.5.1.2 | ColumnpwAtmCfgFarEndMaxCellConcatenation | read-only | current | The maximum number of ATM cells that can be concatenated into one PW packet towards PSN as reported by the far end. If no LDP in use, the object will return va… |
| 1.20.16.1.5.1.3 | ColumnpwAtmCfgTimeoutMode | read-write | current | This objects determines whether a packet can be transmitted to the PSN based on time out expiration for collecting cells or not. The actual handling of the tim… |
| 1.20.16.1.5.1.4 | ColumnpwAtmClpQosMapping | read-write | current | This Object indicates whether the CLP bits should be considered when setting the value in the Quality of Service fields of the encapsulating protocol (e.g. EXP… |
| 1.20.16.1.5.1.5 | ColumnpwAtmOamCellSupported | read-write | current | This Object indicates whether OAM Cells are transported on this PW. In transparent cell transport, the value of this object MUST be false(2) |
| 1.20.16.1.6 | TablepwAtmOutboundNto1Table | not-accessible | current | This table specifies the information for an ATM PW to be carried over PSN in the outbound direction. Up to N entries can be created in this table for every ent… |
| 1.20.16.1.6.1 | RowpwAtmOutboundNto1Entry | not-accessible | current | A row in this table represents an ATM PW that needs to be adapted and carried over PSN. This table is indexed by pwIndex from pwTable and the ATM interface wit… |
| 1.20.16.1.6.1.1 | ColumnpwAtmOutboundNto1AtmIf | not-accessible | current | The ATM Interface that receives cells from the ATM network. |
| 1.20.16.1.6.1.2 | ColumnpwAtmOutboundNto1Vpi | not-accessible | current | VPI value of this ATM PW. In atmTransparent(3), Vpi will be set to 0xFFFFFFFF |
| 1.20.16.1.6.1.3 | ColumnpwAtmOutboundNto1Vci | not-accessible | current | VCI value of this ATM PW. In atmTransparent(3), or VP case, the value will be the equivalent of 0xFFFFFFFF |
| 1.20.16.1.6.1.4 | ColumnpwAtmOutboundNto1RowStatus | read-create | current | This Object is used to create, modify or delete a row in this table. |
| 1.20.16.1.6.1.5 | ColumnpwAtmOutboundNto1TrafficParamDescr | read-create | current | This object represents a pointer to a ATM traffic parameter specification table which will be employed while receiving cells from the ATM network. This table s… |
| 1.20.16.1.6.1.6 | ColumnpwAtmOutboundNto1MappedVpi | read-create | current | The egress generated VPI value of this ATM PW. The entry is valid for PW type of atmCellNto1Vcc(9), atmCellNto1Vpc(10), atmCell1to1Vcc(12), or atmCell1to1Vpc(1… |
| 1.20.16.1.6.1.7 | ColumnpwAtmOutboundNto1MappedVci | read-create | current | The egress generated VCI value of this ATM PW. The entry is valid for PW type of atmCellNto1Vcc(9), atmCellNto1Vpc(10), atmCell1to1Vcc(12), or atmCell1to1Vpc(1… |
| 1.20.16.1.7 | TablepwAtmInboundNto1Table | not-accessible | current | This table specifies the information for an ATM PW to be carried over PSN in the Inbound direction. Up to N entries can be created in this table for every entr… |
| 1.20.16.1.7.1 | RowpwAtmInboundNto1Entry | not-accessible | current | A row in this table represents an ATM PW that needs to be adapted and carried over PSN. This table is indexed by pwIndex from pwTable and the ATM interface wit… |
| 1.20.16.1.7.1.1 | ColumnpwAtmInboundNto1AtmIf | not-accessible | current | The ATM Interface that receives cells from the ATM network. |
| 1.20.16.1.7.1.2 | ColumnpwAtmInboundNto1Vpi | not-accessible | current | VPI value of this ATM PW. In atmTransparent(3), Vpi will be set to 0xFFFFFFFF. |
| 1.20.16.1.7.1.3 | ColumnpwAtmInboundNto1Vci | not-accessible | current | VCI value of this ATM PW. In atmTransparent(3), or VP case, the value will be the equivalent of 0xFFFFFFFF |
| 1.20.16.1.7.1.4 | ColumnpwAtmInboundNto1RowStatus | read-create | current | This Object is used to create, modify or delete a row in this table. |
| 1.20.16.1.7.1.5 | ColumnpwAtmInboundNto1TrafficParamDescr | read-create | current | This object represents a pointer to a ATM traffic parameter specification table which will be employed while receiving cells from the ATM network. This table s… |
| 1.20.16.1.7.1.6 | ColumnpwAtmInboundNto1MappedVpi | read-create | current | The generated VPI value of this ATM PW. The entry is valid for PW type of atmCellNto1Vcc(9), atmCellNto1Vpc(10), atmCell1to1Vcc(12), or atmCell1to1Vpc(13). In … |
| 1.20.16.1.7.1.7 | ColumnpwAtmInboundNto1MappedVci | read-create | current | The generated VCI value of this ATM PW. The entry is valid for PW type of atmCellNto1Vcc(9), atmCellNto1Vpc(10), atmCell1to1Vcc(12), or atmCell1to1Vpc(13. In V… |
| 1.20.16.1.8 | TablepwAtmPerfCurrentTable | not-accessible | current | The current 15 minute interval counts are in this table. This table provides performance information per ATM PW. |
| 1.20.16.1.8.1 | RowpwAtmPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every pwAtmCfgTable entry. After 15 minutes, the contents of this table entry are copied to a new entry in t… |
| 1.20.16.1.8.1.1 | ColumnpwAtmPerfCurrentMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.20.16.1.8.1.2 | ColumnpwAtmPerfCurrentPktsReOrder | read-only | current | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. Note: some implementations may not support this Fea… |
| 1.20.16.1.8.1.3 | ColumnpwAtmPerfCurrentPktsMisOrder | read-only | current | Number of packets detected out of order (via control word sequence numbers). |
| 1.20.16.1.8.1.4 | ColumnpwAtmPerfCurrentPktsTimeout | read-only | current | Number of packets transmitted due to timeout expiration while attempting to collect cells. |
| 1.20.16.1.8.1.5 | ColumnpwAtmPerfCurrentCellsXmit | read-only | current | Number of transmitted cells. |
| 1.20.16.1.8.1.6 | ColumnpwAtmPerfCurrentCellsDropped | read-only | current | Number of dropped cells. |
| 1.20.16.1.8.1.7 | ColumnpwAtmPerfCurrentCellsReceived | read-only | current | Number of received cells. |
| 1.20.16.1.8.1.8 | ColumnpwAtmPerfCurrentUnknownCells | read-only | current | Number of cells received from the PSN with unknown VPI or VCI values. This object is relevant only in N:1 mode. |
| 1.20.16.1.9 | TablepwAtmPerfIntervalTable | not-accessible | current | This table provides performance information per ATM PW similar to the pwAtmPerfCurrentTable above. However, these counts represent historical 15 minute interva… |
| 1.20.16.1.9.1 | RowpwAtmPerfIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every pwAtmPerfCurrentEntry that is 15 minutes old. The contents of the Current entry are copied to the new … |
| 1.20.16.1.9.1.1 | ColumnpwAtmPerfIntervalNumber | not-accessible | current | A number (normally between 1 and 96 to cover a 24 hour period) which identifies the interval for which the set of statistics is available. The interval identif… |
| 1.20.16.1.9.1.2 | ColumnpwAtmPerfIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.20.16.1.9.1.3 | ColumnpwAtmPerfIntervalDuration | read-only | current | The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal … |
| 1.20.16.1.9.1.4 | ColumnpwAtmPerfIntervalMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.20.16.1.9.1.5 | ColumnpwAtmPerfIntervalPktsReOrder | read-only | current | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. Note: some implementations may not support this Fea… |
| 1.20.16.1.9.1.6 | ColumnpwAtmPerfIntervalPktsMisOrder | read-only | current | Number of packets detected out of order (via control word sequence numbers). |
| 1.20.16.1.9.1.7 | ColumnpwAtmPerfIntervalPktsTimeout | read-only | current | Number of packets transmitted due to timeout expiration. |
| 1.20.16.1.9.1.8 | ColumnpwAtmPerfIntervalCellsXmit | read-only | current | Number of transmitted cells. |
| 1.20.16.1.9.1.9 | ColumnpwAtmPerfIntervalCellsDropped | read-only | current | Number of dropped cells. |
| 1.20.16.1.9.1.10 | ColumnpwAtmPerfIntervalCellsReceived | read-only | current | Number of received cells. |
| 1.20.16.1.9.1.11 | ColumnpwAtmPerfIntervalUnknownCells | read-only | current | Number of cells received from the PSN with unknown VPI or VCI values. This object is relevant only in N:1 mode. |
| 1.20.16.1.10 | TablepwAtmPerf1DayIntervalTable | not-accessible | current | This table provides performance information per ATM PW similar to the pwAtmPerfIntervalTable above. However, these counters represent historical 1 day interval… |
| 1.20.16.1.10.1 | RowpwAtmPerf1DayIntervalEntry | not-accessible | current | An entry is created in this table by the agent for every entry in the pwAtmCfgTable table. |
| 1.20.16.1.10.1.1 | ColumnpwAtmPerf1DayIntervalNumber | not-accessible | current | The number of interval, where 1 indicates current day measured period and 2 and above indicate previous days respectively |
| 1.20.16.1.10.1.2 | ColumnpwAtmPerf1DayIntervalValidData | read-only | current | This object indicates if the data for this interval is valid. |
| 1.20.16.1.10.1.3 | ColumnpwAtmPerf1DayIntervalDuration | read-only | current | The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal … |
| 1.20.16.1.10.1.4 | ColumnpwAtmPerf1DayIntervalMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.20.16.1.10.1.5 | ColumnpwAtmPerf1DayIntervalPktsReOrder | read-only | current | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. Note: some implementations may not support this fea… |
| 1.20.16.1.10.1.6 | ColumnpwAtmPerf1DayIntervalPktsMisOrder | read-only | current | Number of packets detected out of order(via control word sequence numbers), and could not be re-ordered. |
| 1.20.16.1.10.1.7 | ColumnpwAtmPerf1DayIntervalPktsTimeout | read-only | current | Number of packets transmitted due to timeout expiration. |
| 1.20.16.1.10.1.8 | ColumnpwAtmPerf1DayIntervalCellsXmit | read-only | current | Number of transmitted cells. |
| 1.20.16.1.10.1.9 | ColumnpwAtmPerf1DayIntervalCellsDropped | read-only | current | Number of dropped cells. |
| 1.20.16.1.10.1.10 | ColumnpwAtmPerf1DayIntervalCellsReceived | read-only | current | Number of received cells. |
| 1.20.16.1.10.1.11 | ColumnpwAtmPerf1DayIntervalUnknownCells | read-only | current | Number of cells received from the PSN with unknown VPI or VCI value. This object is relevant only in N:1 mode. |
| 1.20.16.2 | NodepwAtmConformance | |||
| 1.20.16.2.1 | NodepwAtmGroups | |||
| 1.20.16.2.1.5 | GrouppwAtmCfgGroup | current | Collection of objects for basic ATM PW config. | |
| 1.20.16.2.1.6 | GrouppwAtmPerfGroup | current | Collection of objects for basic ATM PW Performance. | |
| 1.20.16.2.1.7 | GrouppwAtmOutbound1to1Group | current | Collection of objects for basic 1:1 ATM PW outbound config. | |
| 1.20.16.2.1.8 | GrouppwAtmInbound1to1Group | current | Collection of objects for basic 1:1 ATM PW inbound config. | |
| 1.20.16.2.1.9 | GrouppwAtmOutboundNto1Group | current | Collection of objects for N:1 or 1:1 or transparent ATM PW outbound config. | |
| 1.20.16.2.1.10 | GrouppwAtmInboundNto1Group | current | Collection of objects for N:1 or 1:1 or transparent ATM PW inbound config. | |
| 1.20.16.2.2 | NodepwAtmCompliances | |||
| 1.20.16.2.2.2 | CompliancepwAtmCompliance | current | The compliance statement for agent that support ATM PW. |