PW-MPLS-STD-MIB
48 objects
This MIB module complements the PW-STD-MIB module for PW operation over MPLS. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5602; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LSR-STD-MIB | MplsIndexType |
| MPLS-TC-STD-MIB | MplsLdpIdentifier MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex |
| PW-TC-STD-MIB | PwIndexType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.181 | IdentitypwMplsStdMIB | This MIB module complements the PW-STD-MIB module for PW operation over MPLS. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. … | ||
| 1.3.6.1.2.1.181.0 | NodepwMplsNotifications | |||
| 1.3.6.1.2.1.181.1 | NodepwMplsObjects | |||
| 1.3.6.1.2.1.181.1.1 | TablepwMplsTable | not-accessible | current | This table controls MPLS-specific parameters when the PW is going to be carried over MPLS PSN. |
| 1.3.6.1.2.1.181.1.1.1 | RowpwMplsEntry | not-accessible | current | A row in this table represents parameters specific to MPLS PSN for a pseudowire (PW). The row is created automatically by the local agent if the pwPsnType is m… |
| 1.3.6.1.2.1.181.1.1.1.1 | ColumnpwMplsMplsType | read-write | current | This object is set by the operator to indicate the outer tunnel types, if existing. mplsTe(0) is used if the outer tunnel is set up by MPLS-TE, and mplsNonTe(1… |
| 1.3.6.1.2.1.181.1.1.1.2 | ColumnpwMplsExpBitsMode | read-write | current | This object is set by the operator to determine the PW shim label EXP bits. The value of outerTunnel(1) is used where there is an outer tunnel mplsTe(0) or mpl… |
| 1.3.6.1.2.1.181.1.1.1.3 | ColumnpwMplsExpBits | read-write | current | This object is set by the operator if pwMplsExpBitsMode is set to specifiedValue(2) to indicate the MPLS EXP bits to be used on the PW shim label. Otherwise, i… |
| 1.3.6.1.2.1.181.1.1.1.4 | ColumnpwMplsTtl | read-write | current | This object is set by the operator to indicate the PW TTL value to be used on the PW shim label. |
| 1.3.6.1.2.1.181.1.1.1.5 | ColumnpwMplsLocalLdpID | read-write | current | The LDP identifier of the LDP entity that creates this PW in the local node. As the PW labels are always set from the per-platform label space, the last two oc… |
| 1.3.6.1.2.1.181.1.1.1.6 | ColumnpwMplsLocalLdpEntityIndex | read-write | current | The local node LDP Entity Index of the LDP entity creating this PW. |
| 1.3.6.1.2.1.181.1.1.1.7 | ColumnpwMplsPeerLdpID | read-only | current | The peer LDP identifier of the LDP session. This object SHOULD return the value zero if LDP is not used or if the value is not yet known. |
| 1.3.6.1.2.1.181.1.1.1.8 | ColumnpwMplsStorageType | read-write | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.181.1.2 | TablepwMplsOutboundTable | not-accessible | current | This table reports and configures the current outbound MPLS tunnels (i.e., toward the PSN) or the physical interface in the case of a PW label only that carrie… |
| 1.3.6.1.2.1.181.1.2.1 | RowpwMplsOutboundEntry | not-accessible | current | A row in this table configures the outer tunnel used for carrying the PW traffic toward the PSN. In the case of PW label only, it configures the interface that… |
| 1.3.6.1.2.1.181.1.2.1.1 | ColumnpwMplsOutboundLsrXcIndex | read-write | current | This object is applicable if the pwMplsMplsType mplsNonTe(1) bit is set, and MUST return a value of zero otherwise. If the outer tunnel is signaled, the object… |
| 1.3.6.1.2.1.181.1.2.1.2 | ColumnpwMplsOutboundTunnelIndex | read-write | current | This object is applicable if the pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbo… |
| 1.3.6.1.2.1.181.1.2.1.3 | ColumnpwMplsOutboundTunnelInstance | read-only | current | This object is applicable if the pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It indicates the actual tunnel instance that i… |
| 1.3.6.1.2.1.181.1.2.1.4 | ColumnpwMplsOutboundTunnelLclLSR | read-write | current | This object is applicable if the pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of all zeros otherwise. It is part of the set of indexes for the … |
| 1.3.6.1.2.1.181.1.2.1.5 | ColumnpwMplsOutboundTunnelPeerLSR | read-write | current | This object is applicable if the pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbo… |
| 1.3.6.1.2.1.181.1.2.1.6 | ColumnpwMplsOutboundIfIndex | read-write | current | This object is applicable if the pwMplsMplsType pwOnly(0) bit is set, and MUST return a value of zero otherwise. The operator configures the ifIndex of the out… |
| 1.3.6.1.2.1.181.1.2.1.7 | ColumnpwMplsOutboundTunnelTypeInUse | read-only | current | This object indicates the current tunnel that is carrying the PW traffic. The value of notYetKnown(1) should be used if the agent is currently unable to determ… |
| 1.3.6.1.2.1.181.1.3 | TablepwMplsInboundTable | not-accessible | current | This table indicates the PW LDP XC entry in the MPLS-LSR-STD-MIB for signaled PWs. |
| 1.3.6.1.2.1.181.1.3.1 | RowpwMplsInboundEntry | not-accessible | current | A row in this table is created by the agent for each signaled PW, and shows the XC index related to the PW signaling in the inbound direction in the MPLS-LSR-S… |
| 1.3.6.1.2.1.181.1.3.1.1 | ColumnpwMplsInboundXcIndex | read-only | current | The XC index representing this PW in the inbound direction. It MUST return the value zero if the information is not yet known. |
| 1.3.6.1.2.1.181.1.4 | TablepwMplsNonTeMappingTable | not-accessible | current | This table indicates the PW association to the outbound tunnel in non-TE applications, maps the PW to its (inbound) XC entry, and indicates the PW-to-physical … |
| 1.3.6.1.2.1.181.1.4.1 | RowpwMplsNonTeMappingEntry | not-accessible | current | A row in this table displays the association between the PW and - its non-TE MPLS outbound outer tunnel, - its XC entry in the MPLS-LSR-STD-MIB, or - its physi… |
| 1.3.6.1.2.1.181.1.4.1.1 | ColumnpwMplsNonTeMappingDirection | not-accessible | current | Index for the conceptual XC row identifying the tunnel-to-PW mappings, indicating the direction of the packet flow for this entry. psnBound(1) indicates that t… |
| 1.3.6.1.2.1.181.1.4.1.2 | ColumnpwMplsNonTeMappingXcIndex | not-accessible | current | See the description clause of pwMplsNonTeMappingEntry for the usage guidelines of this object. |
| 1.3.6.1.2.1.181.1.4.1.3 | ColumnpwMplsNonTeMappingIfIndex | not-accessible | current | See the description clause of pwMplsNonTeMappingEntry for the usage guidelines of this object. |
| 1.3.6.1.2.1.181.1.4.1.4 | ColumnpwMplsNonTeMappingPwIndex | read-only | current | The value that represents the PW in the pwTable. |
| 1.3.6.1.2.1.181.1.5 | TablepwMplsTeMappingTable | not-accessible | current | This table reports the PW association to the outbound MPLS tunnel for MPLS-TE applications. |
| 1.3.6.1.2.1.181.1.5.1 | RowpwMplsTeMappingEntry | not-accessible | current | A row in this table represents the association between a PW and its MPLS-TE outer (head-end) tunnel. An application can use this table to quickly retrieve the … |
| 1.3.6.1.2.1.181.1.5.1.1 | ColumnpwMplsTeMappingTunnelIndex | not-accessible | current | Primary index for the conceptual row identifying the MPLS-TE tunnel that is carrying the PW traffic. |
| 1.3.6.1.2.1.181.1.5.1.2 | ColumnpwMplsTeMappingTunnelInstance | not-accessible | current | This object identifies the MPLS-TE LSP that is carrying the PW traffic. It MUST return the value zero if the information of the specific LSP is not yet known. … |
| 1.3.6.1.2.1.181.1.5.1.3 | ColumnpwMplsTeMappingTunnelPeerLsrID | not-accessible | current | This object identifies the peer LSR when the outer tunnel is MPLS-TE. |
| 1.3.6.1.2.1.181.1.5.1.4 | ColumnpwMplsTeMappingTunnelLocalLsrID | not-accessible | current | This object identifies the local LSR. |
| 1.3.6.1.2.1.181.1.5.1.5 | ColumnpwMplsTeMappingPwIndex | read-only | current | This object returns the value that represents the PW in the pwTable. |
| 1.3.6.1.2.1.181.2 | NodepwMplsConformance | |||
| 1.3.6.1.2.1.181.2.1 | NodepwMplsGroups | |||
| 1.3.6.1.2.1.181.2.1.1 | GrouppwMplsGroup | current | Collection of objects needed for PW over MPLS PSN configuration. | |
| 1.3.6.1.2.1.181.2.1.2 | GrouppwMplsOutboundMainGroup | current | Collection of objects needed for outbound association of PW and MPLS tunnel. | |
| 1.3.6.1.2.1.181.2.1.3 | GrouppwMplsOutboundTeGroup | current | Collection of objects needed for outbound association of PW and MPLS-TE tunnel. | |
| 1.3.6.1.2.1.181.2.1.4 | GrouppwMplsInboundGroup | current | Collection of objects needed for inbound PW presentation. This group MUST be supported if PW signaling through LDP is used. | |
| 1.3.6.1.2.1.181.2.1.5 | GrouppwMplsMappingGroup | current | Collection of objects needed for mapping association of PW and MPLS tunnel. | |
| 1.3.6.1.2.1.181.2.2 | NodepwMplsCompliances | |||
| 1.3.6.1.2.1.181.2.2.1 | CompliancepwMplsModuleFullCompliance | read-only | current | The compliance statement for agents that provide full support for the PW-MPLS-STD-MIB module. Such devices can then be monitored and also be configured using t… |
| 1.3.6.1.2.1.181.2.2.2 | CompliancepwMplsModuleReadOnlyCompliance | read-only | current | The compliance statement for agents that provide read- only support for the PW-MPLS-STD-MIB module. Such devices can then be monitored but cannot be configured… |