PW-MPLS-STD-R-MIB
49 objects
This MIB module complements the PW-STD-MIB module for PW operation over MPLS. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LSR-STD-MIB | MplsIndexType |
| MPLS-TC-STD-MIB | MplsLdpIdentifier MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex |
| PW-TC-STD-R-MIB | PwIndexType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.20 | NoderadExperimental | |||
| 1.20.12 | IdentitypwMplsStdMIBR | This MIB module complements the PW-STD-MIB module for PW operation over MPLS. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of R… | ||
| 1.20.12.0 | NodepwMplsNotifications | |||
| 1.20.12.1 | NodepwMplsObjects | |||
| 1.20.12.1.1 | TablepwMplsTable | not-accessible | current | This table controls MPLS specific parameters when the PW is going to be carried over MPLS PSN. |
| 1.20.12.1.1.1 | RowpwMplsEntry | not-accessible | current | A row in this table represents parameters specific to MPLS PSN for a pseudo-wire (PW). The row is created automatically by the local agent if the pwPsnType is … |
| 1.20.12.1.1.1.1 | ColumnpwMplsMplsType | read-write | current | This object is set by the operator to indicate the outer tunnel types, if exists. mplsTe(0) is used if the outer tunnel is set up by MPLS-TE, and mplsNonTe(1) … |
| 1.20.12.1.1.1.2 | ColumnpwMplsExpBitsMode | read-write | current | This object is set by the operator to determine the PW shim label EXP bits. The value of outerTunnel(1) is used where there is an outer tunnel - pwMplsMplsType… |
| 1.20.12.1.1.1.3 | ColumnpwMplsExpBits | read-write | current | This object is set by the operator to indicate the MPLS EXP bits to be used on the PW shim label if pwMplsExpBitsMode is specifiedValue(2), zero otherwise. |
| 1.20.12.1.1.1.4 | ColumnpwMplsTtl | read-write | current | This object is set by the operator to indicate the PW TTL value to be used on the PW shim label. |
| 1.20.12.1.1.1.5 | ColumnpwMplsLocalLdpID | read-write | current | The local LDP identifier of the LDP entity creating this PW in the local node. As the PW labels are always set from the per-platform label space, the last two … |
| 1.20.12.1.1.1.6 | ColumnpwMplsLocalLdpEntityIndex | read-write | current | The local node LDP Entity Index of the LDP entity creating this PW. |
| 1.20.12.1.1.1.7 | ColumnpwMplsPeerLdpID | read-only | current | The peer LDP identifier as identified from the LDP session. Should return the value of zero if not applicable or not known yet. |
| 1.20.12.1.1.1.8 | ColumnpwMplsStorageType | read-write | current | This variable indicates the storage type for this row. |
| 1.20.12.1.2 | TablepwMplsOutboundTable | not-accessible | current | This table reports and configures the current outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in the case of a PW label only that carries… |
| 1.20.12.1.2.1 | RowpwMplsOutboundEntry | not-accessible | current | A row in this table configures the outer tunnel used for carrying the PW traffic toward the PSN. In the case of PW labels only, it configures the interface tha… |
| 1.20.12.1.2.1.1 | ColumnpwMplsOutboundLsrXcIndex | read-write | current | This object is applicable if pwMplsMplsType mplsNonTe(1) bit is set, and MUST return a value of zero otherwise. If the outer tunnel is signaled, the object is … |
| 1.20.12.1.2.1.2 | ColumnpwMplsOutboundTunnelIndex | read-write | current | This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbound … |
| 1.20.12.1.2.1.3 | ColumnpwMplsOutboundTunnelInstance | read-only | current | This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It indicates the actual tunnel instance that is cu… |
| 1.20.12.1.2.1.4 | ColumnpwMplsOutboundTunnelLclLSR | read-write | current | This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of all zeros otherwise. It is part of the set of indexes for the outb… |
| 1.20.12.1.2.1.5 | ColumnpwMplsOutboundTunnelPeerLSR | read-write | current | This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbound … |
| 1.20.12.1.2.1.6 | ColumnpwMplsOutboundIfIndex | read-write | current | This object is applicable if pwMplsMplsType pwOnly(0) bit is set, and MUST return a value of zero otherwise. The operator configures the ifIndex of the outboun… |
| 1.20.12.1.2.1.7 | ColumnpwMplsOutboundTunnelTypeInUse | read-only | current | This object indicates the current tunnel that is carrying the PW traffic. The value of notYetKnown(1) should be used if the agent is currently unable to determ… |
| 1.20.12.1.3 | TablepwMplsInboundTable | not-accessible | current | This table indicates the PW LDP XC entry in the MPLS-LSR-STD-MIB for signaled PWs. |
| 1.20.12.1.3.1 | RowpwMplsInboundEntry | not-accessible | current | A row in this table is created by the agent for each signaled PW, and shows the XC index related to the PW signaling in the inbound direction in the MPLS-LSR-S… |
| 1.20.12.1.3.1.1 | ColumnpwMplsInboundXcIndex | read-only | current | The XC index representing this PW in the inbound direction. It MUST return the value of zero if the information is not yet known. |
| 1.20.12.1.4 | TablepwMplsNonTeMappingTable | not-accessible | current | This table indicates the PW association to the outbound Tunnel in non-TE applications, maps the PW to it's (inbound) XC entry, and indicates the PW-to-physical… |
| 1.20.12.1.4.1 | RowpwMplsNonTeMappingEntry | not-accessible | current | A row in this table displays the association between the PW and - its non-TE MPLS outbound outer Tunnel or, - its XC entry in the MPLS-LSR-STD-MIB, - its physi… |
| 1.20.12.1.4.1.1 | ColumnpwMplsNonTeMappingDirection | not-accessible | current | Index for the conceptual XC row identifying the tunnel-to-PW mappings, indicating the direction of the packet flow for this entry. psnBound(1) indicates that t… |
| 1.20.12.1.4.1.2 | ColumnpwMplsNonTeMappingXcIndex | not-accessible | current | See the description clause of pwMplsNonTeMappingEntry for the usage guidelines of this object. |
| 1.20.12.1.4.1.3 | ColumnpwMplsNonTeMappingIfIndex | not-accessible | current | See the description clause of pwMplsNonTeMappingEntry for the usage guidelines of this object. |
| 1.20.12.1.4.1.4 | ColumnpwMplsNonTeMappingPwIndex | read-only | current | The value that represent the PW in the pwTable. |
| 1.20.12.1.5 | TablepwMplsTeMappingTable | not-accessible | current | This table reports the PW association to the outbound MPLS tunnel for MPLS-TE applications. |
| 1.20.12.1.5.1 | RowpwMplsTeMappingEntry | not-accessible | current | A row in this table represents the association between a PW and its MPLS-TE outer (head-end) Tunnel. An application can use this table to quickly retrieve the … |
| 1.20.12.1.5.1.1 | ColumnpwMplsTeMappingTunnelIndex | not-accessible | current | Primary index for the conceptual row identifying the MPLS-TE tunnel that is carrying the PW traffic. |
| 1.20.12.1.5.1.2 | ColumnpwMplsTeMappingTunnelInstance | not-accessible | current | This object identifies the MPLS-TE LSP that is carrying the PW traffic. It MUST return the value of zero if the information of the specific LSP is not yet know… |
| 1.20.12.1.5.1.3 | ColumnpwMplsTeMappingTunnelPeerLsrID | not-accessible | current | This object identifies the Peer LSR when the outer tunnel is MPLS-TE. |
| 1.20.12.1.5.1.4 | ColumnpwMplsTeMappingTunnelLocalLsrID | not-accessible | current | This object identifies the local LSR. |
| 1.20.12.1.5.1.5 | ColumnpwMplsTeMappingPwIndex | read-only | current | This object returns the value that represents the PW in the pwTable. |
| 1.20.12.2 | NodepwMplsConformance | |||
| 1.20.12.2.1 | NodepwMplsGroups | |||
| 1.20.12.2.1.1 | GrouppwMplsGroup | current | Collection of objects needed for PW over MPLS PSN configuration. | |
| 1.20.12.2.1.2 | GrouppwMplsOutboundMainGroup | current | Collection of objects needed for outbound association of PW and MPLS tunnel. | |
| 1.20.12.2.1.3 | GrouppwMplsOutboundTeGroup | current | Collection of objects needed for outbound association of PW and MPLS TE tunnel. | |
| 1.20.12.2.1.4 | GrouppwMplsInboundGroup | current | Collection of objects needed for inbound PW presentation. This group MUST be supported if PW signaling through LDP is used. | |
| 1.20.12.2.1.5 | GrouppwMplsMappingGroup | current | Collection of objects needed for mapping association of PW and MPLS tunnel. | |
| 1.20.12.2.2 | NodepwMplsCompliances | |||
| 1.20.12.2.2.1 | CompliancepwMplsModuleFullCompliance | read-only | current | The compliance statement for agents that provide full support for PW-MPLS MIB Module. Such devices can then be monitored and also be configured using this MIB … |
| 1.20.12.2.2.2 | CompliancepwMplsModuleReadOnlyCompliance | read-only | current | The compliance statement for agents that provide read- only support for the PW-MPLS-STD-MIB Module. Such devices can then be monitored but cannot be configured… |