QTECH-SYSTEM-MIB
242 objects
This module defines qtech system mibs.
Imported Objects
| QTECH-AC-MGMT-MIB | qtechApMacAddr |
| QTECH-MEMORY-MIB | qtechMemoryPoolCurrentUtilization |
| QTECH-PROCESS-MIB | Percent qtechCPUUtilization1Min |
| QTECH-SMI | qtechMgmt |
| RFC1155-SMI | Gauge |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.1 | IdentityqtechSystemMIB | This module defines qtech system mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.1.1 | NodeqtechSystemMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.1 | ScalarqtechSystemHwVersion | read-only | current | Return the string of the Revision number of hardware resides on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.2 | ScalarqtechSystemSwVersion | read-only | current | Return the string of the Revision number of software resides on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.3 | ScalarqtechSystemBootVersion | read-only | current | Return the string of the Revision number of BOOT software resides on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.4 | ScalarqtechSystemSysCtrlVersion | read-only | current | Return the string of the Revision number of CTRL software resides on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.5 | ScalarqtechSystemParametersSave | read-write | current | Save all parameters changed in configuration by setting this object to any value but 0, set its value to 0 will cause no action of agent, otherwise all changes… |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.6 | ScalarqtechSystemOutBandRate | read-write | current | Determine the console(OutBand) baud rate : 9600 - 1,19200 - 2, 38300 - 3, 57600 - 4, 115200 - 5, when the console baud rate is other value will return value 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.7 | ScalarqtechSystemReset | read-write | current | This Object allow perform soft reset of system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start trap wi… |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.8 | ScalarqtechSwitchLayer | read-only | current | Which layer's device the switch in system |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.9 | ScalarqtechSystemHwPower | read-only | current | The state of power. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.10 | ScalarqtechSystemHwFan | read-only | current | The state of fan. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.11 | ScalarqtechSystemOutBandTimeout | read-write | obsolete | The timeout of console.0 indicate that timeout function is disabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.12 | ScalarqtechSystemTelnetTimeout | read-write | obsolete | The timeout of telnet.0 indicate that timeout function is disabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.13 | ScalarqtechSystemMainFile | read-only | current | Return the string of the name of main file on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.14 | ScalarqtechSystemCurrentPower | read-only | current | Return the current power of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.15 | ScalarqtechSystemRemainPower | read-only | current | Return the remain power of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.16 | ScalarqtechSystemTemperature | read-only | current | Return the temperature of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.17 | ScalarqtechSystemElectricalSourceNum | read-only | current | Return the electrical source number of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.18 | TableqtechSystemElectricalSourceIsNormalTable | not-accessible | current | A table of electrical source entries. Each object displays whether different electrical sources are normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.18.1 | RowqtechSystemElectricalSourceIsNormalEntry | not-accessible | current | An entry displays whether different electrical sources are normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.18.1.1 | ColumnqtechSystemElectricalSourceIsNormalIndex | read-only | current | An index that uniquely represents a electrical source. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.18.1.2 | ColumnqtechSystemElectricalSourceIsNormal | read-only | current | This object displays whether an electrical source is normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.18.1.3 | ColumnqtechSystemElectricalSourceName | read-only | current | The name of electrical source |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.19 | ScalarqtechSystemCurrentVoltage | read-only | current | Return the current voltage of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.20 | ScalarqtechSystemFanNUM | read-only | current | Return the number of fan on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.21 | TableqtechSystemFanIsNormalTable | not-accessible | current | A table of fan entries. Each object displays whether different fans are normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.21.1 | RowqtechSystemFanIsNormalEntry | not-accessible | current | An entry displays whether different fans are normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.21.1.1 | ColumnqtechSystemFanIsNormalIndex | read-only | current | An index that uniquely represents a fan. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.21.1.2 | ColumnqtechSystemFanIsNormal | read-only | current | This object displays whether an fan is normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.21.1.3 | ColumnqtechSystemFanName | read-only | current | The name of fan |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.21.1.4 | ColumnqtechSystemFanSpeed | read-only | current | This object displays the fan's speed. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.22 | ScalarqtechSystemReloadTimeRemain | read-only | current | Return the remain time of reloading on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23 | TableqtechSystemTemperatureTable | not-accessible | current | A table of temperature entries. Each object displays the temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23.1 | RowqtechSystemTemperatureEntry | not-accessible | current | An entry displays the temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23.1.1 | ColumnqtechSystemTemperatureIndex | read-only | current | An index that uniquely represents a device's temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23.1.2 | ColumnqtechSystemTemperatureName | read-only | current | A textual name assigned to a temperature chip |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23.1.3 | ColumnqtechSystemTemperatureCurrent | read-only | current | Return the current temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23.1.4 | ColumnqtechSystemTemperatureWarningVaule | read-write | current | The first warning of temperature of the device CPU. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.23.1.5 | ColumnqtechSystemTemperatureCritialVaule | read-write | current | The second warning of temperature of the device CPU. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.24 | ScalarqtechSystemSerialno | read-only | current | Return the string of the serial number resides on the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25 | TableqtechSystemVersionTable | not-accessible | current | A table of system version entries. Each object displays the system version information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1 | RowqtechSystemVersionEntry | not-accessible | current | An entry displays the system version information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.1 | ColumnqtechSystemVersionIndex | read-only | current | An index that uniquely represents a device's system version information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.2 | ColumnqtechSystemVersionName | read-only | current | A textual name assigned to a system version chip |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.3 | ColumnqtechSystemVersionSwBoot | read-only | current | Return the software boot system version of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.4 | ColumnqtechSystemVersionSwCtrl | read-only | current | Return the software ctrl system version of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.5 | ColumnqtechSystemVersionSwMain | read-only | current | Return the software main system version of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.6 | ColumnqtechSystemVersionHw | read-only | current | Return the hardware system version of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.25.1.7 | ColumnqtechSystemVersionSerialno | read-only | current | Return the serial number of the FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.26 | ScalarqtechSystemSysModel | read-only | current | Return the SysModel of equipment. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.27 | ScalarqtechSystemUptime | read-only | current | Return the SysUptime of equipment,unit is seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.28 | ScalarqtechSystemSampleTime | read-write | current | Sampling duration. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.29 | ScalarqtechSystemStatWindowTime | read-write | current | Stating duration. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.30 | ScalarqtechSystemManufacturer | read-only | current | Return the string of the manufacturer. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.31 | ScalarqtechSystemCurrentTime | read-write | current | Return the current time of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.32 | ScalarqtechSystemWarnResendTime | read-write | current | Return the resending time of warn trap of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.33 | ScalarqtechSystemSoftwareName | read-only | current | Return the software name of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.34 | ScalarqtechSystemSoftwareManufacturer | read-only | current | Return the software manufacturer of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.35 | ScalarqtechSystemCpuType | read-only | current | Return the cpu type infomation of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.36 | ScalarqtechSystemMemoryType | read-only | current | Return the memory type of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.37 | ScalarqtechSystemMemorySize | read-only | current | Return the memory card storage of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.38 | ScalarqtechSystemFlashSize | read-only | current | Return the flash size of the system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39 | TableqtechSystemLankApTable | not-accessible | current | A table of lank ap system entries. Each object displays the lank ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1 | RowqtechSystemLankApEntry | not-accessible | current | An entry displays the lank ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.1 | ColumnqtechSystemLankApMacAddr | read-only | current | An index that uniquely represents lank ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.2 | ColumnqtechSystemLankApStatWindowTime | read-write | current | Stating duration of lank ap. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.3 | ColumnqtechSystemLankApSampleTime | read-write | current | Sampling duration of lank ap. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.4 | ColumnqtechSystemLankApReset | read-write | current | This Object allow perform soft reset of lank ap system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start… |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.5 | ColumnqtechSystemLankApSoftwareName | read-only | current | Return the software name of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.6 | ColumnqtechSystemLankApSwVersion | read-only | current | Return the string of the Revision number of software resides on the lank ap FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.7 | ColumnqtechSystemLankApSoftwareManufacturer | read-only | current | Return the software manufacturer of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.8 | ColumnqtechSystemLankApCpuType | read-only | current | Return the cpu type infomation of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.9 | ColumnqtechSystemLankApMemoryType | read-only | current | Return the memory type of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.10 | ColumnqtechSystemLankApMemorySize | read-only | current | Return the memory card storage of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.11 | ColumnqtechSystemLankAPFlashSize | read-only | current | Return the flash size of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.12 | ColumnqtechSystemLankApManufacturer | read-only | current | Return the string of the manufacturer of lank ap. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.13 | ColumnqtechSystemLankApSerialno | read-only | current | Return the string of the serial number resides on the lank ap FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.14 | ColumnqtechSystemLankApSysModel | read-only | current | Return the SysModel of lank ap equipment. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.15 | ColumnqtechSystemLankApUptime | read-only | current | Return the SysUptime of lank ap equipment. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.16 | ColumnqtechSystemLankApAccurateUptime | read-only | current | Return the accurate system Uptime of ap equipment,unit is ticks |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.39.1.17 | ColumnqtechSystemLankApHwVersion | read-only | current | Return the string of the Revision number of hardware resides on the lank ap FastSwitch. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.40 | TableqtechSystemBoardTemperatureTable | not-accessible | current | A table of board temperature entries. Each object displays the board temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.40.1 | RowqtechSystemBoardTemperatureEntry | not-accessible | current | An entry displays the board temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.40.1.1 | ColumnqtechSystemBoardTemperatureIndex | read-only | current | An index that uniquely represents a device's board temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.40.1.2 | ColumnqtechSystemBoardTemperatureName | read-only | current | A textual name assigned to a board temperature chip |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.40.1.3 | ColumnqtechSystemBoardTemperatureCurrent | read-only | current | Return the current board temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41 | TableqtechSystemElectricalInformationTable | not-accessible | current | A table of electrical entries. Each object displays the electrical information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1 | RowqtechSystemElectricalInformationEntry | not-accessible | current | An entry displays the electrical information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.1 | ColumnqtechSystemElectricalInformationDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.2 | ColumnqtechSystemElectricalInformationIndex | read-only | current | An index that uniquely represents a electriacl. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.3 | ColumnqtechSystemElectricalInformationStatus | read-only | current | This object displays whether an electrical source is normal or not. If the electrical is no exist, the other of electrical information maybe return nothing inf… |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.4 | ColumnqtechSystemElectricalInformationType | read-only | current | This object displays the type of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.5 | ColumnqtechSystemElectricalInformationAttribute | read-only | current | This object displays attribute of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.6 | ColumnqtechSystemElectricalInformationSofeVersion | read-only | current | This object displays the sofe version of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.7 | ColumnqtechSystemElectricalInformationHardwareVersion | read-only | current | This object displays the hardware version of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.8 | ColumnqtechSystemElectricalInformationSerial | read-only | current | This object displays the serial of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.9 | ColumnqtechSystemElectricalInformationProductionDate | read-only | current | This object displays the productiron date of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.10 | ColumnqtechSystemElectricalInformationRatedPower | read-only | current | This object displays the rated power(Unit: W) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.11 | ColumnqtechSystemElectricalInformationInVoltage | read-only | current | This object displays the input voltage(Unit: V) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.12 | ColumnqtechSystemElectricalInformationInCurrent | read-only | current | This object displays the input current(Unit: mA) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.13 | ColumnqtechSystemElectricalInformationOutVoltage | read-only | current | This object displays the output voltage(Unit: V) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.14 | ColumnqtechSystemElectricalInformationOutCurrent | read-only | current | This object displays the output current(Unit: mA) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.15 | ColumnqtechSystemElectricalInformationOutPower | read-only | current | This object displays the output power(Unit: W) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.16 | ColumnqtechSystemElectricalInformationTemperature | read-only | current | This object displays the temperature(Unit: C) of the electrical. If the device is no support this information, This object will return -255. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.17 | ColumnqtechSystemElectricalInformationAirflowCoexist | read-only | current | This object displays the airflow coexist of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.41.1.18 | ColumnqtechSystemElectricalInformationWarningStatus | read-only | current | This object displays the warning status of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42 | TableqtechSystemFanInformationTable | not-accessible | current | A table of fan entries. Each object displays the fan information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1 | RowqtechSystemFanInformationEntry | not-accessible | current | An entry displays the fan information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.1 | ColumnqtechSystemFanInformationDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.2 | ColumnqtechSystemFanInformationFanIndex | read-only | current | An index that uniquely represents a fan device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.3 | ColumnqtechSystemFanInformationStatus | read-only | current | This object displays whether an fan device source is exist or not. If the fan device is no exist, the other of fan information maybe return nothing information… |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.4 | ColumnqtechSystemFanInformationType | read-only | current | This object displays the type of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.5 | ColumnqtechSystemFanInformationAttribute | read-only | current | This object displays attribute of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.6 | ColumnqtechSystemFanInformationSofeVersion | read-only | current | This object displays the sofe version of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.7 | ColumnqtechSystemFanInformationFirmwareVersion | read-only | current | This object displays the firmware version of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.8 | ColumnqtechSystemFanInformationHardwareVersion | read-only | current | This object displays the hardware version of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.9 | ColumnqtechSystemFanInformationSerial | read-only | current | This object displays the serial of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.10 | ColumnqtechSystemFanInformationProductionDate | read-only | current | This object displays the productiron date of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.11 | ColumnqtechSystemFanInformationTemperature | read-only | current | This object displays the temperature of the fan device. If the device is no support this information, This object will return -255. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.12 | ColumnqtechSystemFanInformationNumber | read-only | current | This object displays the number of the fan device. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.13 | ColumnqtechSystemFanInformationAirflowCoexist | read-only | current | This object displays the airflow coexist of the fan device. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.42.1.14 | ColumnqtechSystemFanInformationWarningStatus | read-only | current | This object displays the warning status of the fan device. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43 | TableqtechSystemFanStatusTable | not-accessible | current | A table of fan status entries. Each object displays the fan status information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1 | RowqtechSystemFanStatusEntry | not-accessible | current | An entry displays the fan status information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1.1 | ColumnqtechSystemFanStatusDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1.2 | ColumnqtechSystemFanStatusFanIndex | read-only | current | An index that uniquely represents a fan device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1.3 | ColumnqtechSystemFanStatusIndex | read-only | current | An index that uniquely represents a fan. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1.4 | ColumnqtechSystemFanStatus | read-only | current | This object displays whether an fan is normal or not. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1.5 | ColumnqtechSystemFanStatusLevel | read-only | current | This object displays the level of the fan speed. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.43.1.6 | ColumnqtechSystemFanStatusSpeed | read-only | current | This object displays fan speed(rpm). If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44 | TableqtechSystemMultipleTemperatureTable | not-accessible | current | A table of multiple temperature entries. Each object displays the multiple temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1 | RowqtechSystemMultipleTemperatureEntry | not-accessible | current | An entry displays the multiple temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.1 | ColumnqtechSystemMultipleTemperatureDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.2 | ColumnqtechSystemMultipleTemperatureSlotIndex | read-only | current | An index that uniquely represents a slot device. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.3 | ColumnqtechSystemMultipleTemperatureIndex | read-only | current | An index that uniquely represents a device's multiple temperature information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.4 | ColumnqtechSystemMultipleTemperatureName | read-only | current | A textual name assigned to a multiple temperature chip |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.5 | ColumnqtechSystemMultipleTemperatureCurrent | read-only | current | Return the current multiple temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to -255. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.6 | ColumnqtechSystemMultipleTemperatureWarning | read-write | current | Return the warning multiple temperature of the FastSwitch.The temperature display is not supported for the warning temperature returns to -255. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.44.1.7 | ColumnqtechSystemMultipleTemperatureCritical | read-write | current | Return the critical multiple temperature of the FastSwitch.The temperature display is not supported for the critical temperature returns to -255. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.45 | ScalarqtechSystemAccurateUptime | read-only | current | Return the accurate system Uptime of equipment,unit is ticks. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.46 | ScalarqtechSystemPowerIndex | read-only | current | Index of power |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.47 | ScalarqtechSystemSwitchID | read-only | current | Switch id in VSU |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48 | TableqtechSystemApDeviceDescriptionTable | not-accessible | current | A table of lank ap system entries. Each object displays the lank ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1 | RowqtechSystemApDeviceDescriptionEntry | not-accessible | current | An entry displays the ap Device Description. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.1 | ColumnqtechSystemApDescMacAddr | read-only | current | An index that uniquely represents ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.2 | ColumnqtechSystemApMemoryType | read-only | current | Return the memory type of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.3 | ColumnqtechSystemApMemorySize | read-only | current | Return the memory card storage of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.4 | ColumnqtechSystemAPFlashType | read-only | current | An index that uniquely represents ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.5 | ColumnqtechSystemAPFlashSize | read-only | current | Return the flash size of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.6 | ColumnqtechSystemApNVRAMSize | read-only | current | Return the NVRAM size of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.7 | ColumnqtechSystemApCFSize | read-only | current | Return the CF size of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.48.1.8 | ColumnqtechSystemApCPUType | read-only | current | Return the cpu type of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49 | TableqtechSystemApDeviceStatisticsTable | not-accessible | current | A table of lank ap system entries. Each object displays the lank ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1 | RowqtechSystemApDeviceStatisticsEntry | not-accessible | current | An entry displays the ap Device Statistics. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.1 | ColumnqtechSystemApStatMacAddr | read-only | current | An index that uniquely represents ap system information. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.2 | ColumnqtechSystemApInterfaceNum | read-only | current | Return the interface number of the lank ap system. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.3 | ColumnqtechSystemApUptime | read-only | current | Return the SysUptime of lank ap equipment, unit is ticks. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.4 | ColumnqtechSystemApCPUUtilizationCurrent | read-only | current | This is the collection of current lank ap cpu using rate. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.5 | ColumnqtechSystemApCPUUtilizationAverage | read-only | current | This is the average cpu using rate currently. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.6 | ColumnqtechSystemApMemoryPoolCurrentUtilization | read-only | current | This is the memory pool utilization currently. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.7 | ColumnqtechSystemApMemoryPoolAverageUtilization | read-only | current | This is the average memory pool utilization currently. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.8 | ColumnqtechSystemApFlashFreeSize | read-only | current | This is the free size of the flash device, unit is MB. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.49.1.9 | ColumnqtechSystemAPDeviceTemperature | read-only | current | This is the temperature of the ap.But the ap is no support this information, so it will return 35 in perpetuity |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.50 | ScalarqtechSystemUptimeMsLow | read-only | current | Return the equipment SysUptime Low 32-bit,unit is tick. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.51 | ScalarqtechSystemUptimeMsHigh | read-only | current | Return the equipment SysUptime High 32-bit,unit is tick. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.52 | TableqtechSystemFanSNTable | not-accessible | current | A table of fan's serial number |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.52.1 | RowqtechSystemFanSNEntry | not-accessible | current | An entry displays fan SN. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.52.1.1 | ColumnqtechSystemFanPadIndex | read-only | current | Return the index of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.52.1.2 | ColumnqtechSystemFanPadName | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.52.1.3 | ColumnqtechSystemFanPadSN | read-only | current | Return the SN of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.53 | TableqtechSystemDsfSNTable | not-accessible | current | A table of dsf's serial number |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.53.1 | RowqtechSystemDsfSNEntry | not-accessible | current | An entry displays dsf SN. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.53.1.1 | ColumnqtechSystemDsfIndex | read-only | current | Return the index of the dsf. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.53.1.2 | ColumnqtechSystemDsfName | read-only | current | Return the name of the dsf. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.53.1.3 | ColumnqtechSystemDsfSN | read-only | current | Return the SN of the dsf. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.54 | TableqtechSystemPowerSNTable | not-accessible | current | A table of power's serial number |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.54.1 | RowqtechSystemPowerSNEntry | not-accessible | current | An entry displays power SN. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.54.1.1 | ColumnqtechSystemPowerSNIndex | read-only | current | Return the index of the power. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.54.1.2 | ColumnqtechSystemPowerSNName | read-only | current | Return the name of the power. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.54.1.3 | ColumnqtechSystemPowerSN | read-only | current | Return the SN of the power. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55 | TableqtechSystemFanPad1SpeedTable | not-accessible | current | A table of fan's speed on fan pad1. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1 | RowqtechSystemFanPad1SpeedEntry | not-accessible | current | An entry displays fan's speed on same fan pad |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.1 | ColumnqtechSystemOamFanPad1Index | read-only | current | Return the index of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.2 | ColumnqtechSystemOamFanPad1Name | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.3 | ColumnqtechSystemFanPad1Speed1 | read-only | current | Return the speed of the fan1. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.4 | ColumnqtechSystemFanPad1Speed2 | read-only | current | Return the speed of the fan2. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.5 | ColumnqtechSystemFanPad1Speed3 | read-only | current | Return the speed of the fan3. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.6 | ColumnqtechSystemFanPad1Speed4 | read-only | current | Return the speed of the fan4. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.7 | ColumnqtechSystemFanPad1Speed5 | read-only | current | Return the speed of the fan5. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.8 | ColumnqtechSystemFanPad1Speed6 | read-only | current | Return the speed of the fan6. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.9 | ColumnqtechSystemFanPad1Speed7 | read-only | current | Return the speed of the fan7. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.10 | ColumnqtechSystemFanPad1Speed8 | read-only | current | Return the speed of the fan8. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.55.1.11 | ColumnqtechSystemFanPad1Speed9 | read-only | current | Return the speed of the fan9. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56 | TableqtechSystemFanPad2SpeedTable | not-accessible | current | A table of fan's speed on fan pad2. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56.1 | RowqtechSystemFanPad2SpeedEntry | not-accessible | current | An entry displays fan's speed on same fan pad2 |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56.1.1 | ColumnqtechSystemOamFanPad2Index | read-only | current | Return the index of the fan pad2. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56.1.2 | ColumnqtechSystemOamFanPad2Name | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56.1.3 | ColumnqtechSystemFanPad2Speed1 | read-only | current | Return the speed of the fan1. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56.1.4 | ColumnqtechSystemFanPad2Speed2 | read-only | current | Return the speed of the fan2. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.56.1.5 | ColumnqtechSystemFanPad2Speed3 | read-only | current | Return the speed of the fan3. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57 | TableqtechSystemFanPad3SpeedTable | not-accessible | current | A table of fan's speed on fan pad3. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1 | RowqtechSystemFanPad3SpeedEntry | not-accessible | current | An entry displays fan's speed on same fan pad3 |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.1 | ColumnqtechSystemOamFanPad3Index | read-only | current | Return the index of the fan pad3. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.2 | ColumnqtechSystemOamFanPad3Name | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.3 | ColumnqtechSystemFanPad3Speed1 | read-only | current | Return the speed of the fan1. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.4 | ColumnqtechSystemFanPad3Speed2 | read-only | current | Return the speed of the fan2. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.5 | ColumnqtechSystemFanPad3Speed3 | read-only | current | Return the speed of the fan3. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.6 | ColumnqtechSystemFanPad3Speed4 | read-only | current | Return the speed of the fan4. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.1.57.1.7 | ColumnqtechSystemFanPad3Speed5 | read-only | current | Return the speed of the fan5. |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2 | NodeqtechSystemMIBTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.1 | ScalarqtechSystemHardChangeDesc | accessible-for-notify | current | The description of hard change |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.2 | NotificationqtechSystemHardChangeDetected | current | System hardware has changed include number of devices or number of modules or the place or type of the module is change. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.3 | NotificationqtechSystemPowerStateChange | current | while the state of power changed, then this trap will be sent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.4 | NotificationqtechSystemFanStateChange | current | while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.5 | NotificationqtechSystemCPUusageTooHighTrap | current | CPU usage Too High warning. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.6 | NotificationqtechSystemCPUusageTooHighRecovTrap | current | clear the warning of CPU usage too high and report the current CPU usage. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.7 | NotificationqtechSystemTmpTooHighTrap | current | Temperature Too High warning. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.8 | NotificationqtechSystemTmpTooHighRecovTrap | current | clear the warning of temperature too high and report the current temperature. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.9 | NotificationqtechSystemMemusageTooHighTrap | current | Memory usage too high warning. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.10 | NotificationqtechSystemMemusageTooHighRecovTrap | current | clear the warning of Memory usage too high and report the current Memory usage. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.11 | NotificationqtechSystemLankApCPUusageTooHighTrap | current | lank ap CPU usage Too High warning. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.12 | NotificationqtechSystemLankApCPUusageTooHighRecovTrap | current | clear the warning of lank ap CPU usage too high and report the current CPU usage. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.13 | NotificationqtechSystemLankApMemusageTooHighTrap | current | lank ap Memory usage too high warning. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.14 | NotificationqtechSystemLankApMemusageTooHighRecovTrap | current | clear the warning of lank ap Memory usage too high and report the current Memory usage. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.15 | NotificationqtechSystemResetTrap | current | send a trap while system reset | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.16 | NotificationqtechSystemLankApResetTrap | current | send a trap while lank ap system reset | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.17 | NotificationqtechSystemPowerOnTrap | current | send a trap while power on. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.18 | NotificationqtechSystemPowerOffTrap | current | send a trap while power off. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.19 | NotificationqtechSystemPowerOnTrapInVSU | current | send a trap while power on in VSU. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.20 | NotificationqtechSystemPowerOffTrapInVSU | current | send a trap while power off in VSU. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.21 | NotificationqtechSystemTmpTableTooHighTrap | current | Temperature Too High warning with the slot index. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.22 | NotificationqtechSystemTmpTableTooHighRecovTrap | current | clear the warning of Temperature too high with the slot index. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.23 | NotificationqtechSystemTmpTableTooHighTrapVSU | current | Temperature Too High warning with the slot index in VSU. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.24 | NotificationqtechSystemTmpTableTooHighRecovTrapVSU | current | clear the warning of Temperature too high with the slot index. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.25 | NotificationqtechSystemFanTableStateChange | current | while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.2.26 | NotificationqtechSystemFanTableStateChangeVSU | current | In VSU, while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.3 | NodeqtechSystemMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.1.3.1 | NodeqtechSystemMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.1.3.1.1 | ComplianceqtechSystemMIBCompliance | current | The compliance statement for entities which implement the Qtech System MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.1.3.2 | NodeqtechSystemMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.1.3.2.1 | GroupqtechSystemMIBGroup | current | A collection of objects providing system information and opertion to a Qtech agent. |