QTECH-WLAN-FIT-AP-IN-MIB
176 objects
Wlan software private MIB for Qtech SNC according to the China Mobile standard. This is device manage MIB.
Imported Objects
| QTECH-AC-MGMT-MIB | qtechApApName qtechApCfgRadioId qtechApgWlanId qtechApMacAddr qtechStaMacAddr |
| QTECH-SMI | qtechMgmt |
| RFC1155-SMI | Gauge |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.83 | IdentityqtechFitApMibModule | Wlan software private MIB for Qtech SNC according to the China Mobile standard. This is device manage MIB. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.83.0 | NodeqtechAlarmTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.0.1 | NotificationqtechWIDSIllegalAlarmTrap | current | This trap will be sent at once when detecting an suspicious AP. | |
| 1.3.6.1.4.1.27514.1.1.10.2.83.0.2 | NotificationqtechTelMtWorkModeChgTrap | current | This trap will be sent when the ap monitor workMode Change. | |
| 1.3.6.1.4.1.27514.1.1.10.2.83.0.4 | NotificationqtechAttackAlarm | current | This trap will be sent when Attack has Appeared . | |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1 | NodeqtechSystemInfoConfigObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.1 | ScalarqtechDomain | read-only | current | The Product Domain. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.2 | ScalarqtechPhySeparatedEnable | read-write | current | virtual phy separated enable config ,0:off 1:on. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.3 | ScalarqtechForfendDosAttackEnable | read-write | current | Forfend DOS Attack config ,0:off 1:on. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.4 | ScalarqtechAcTrafficLoadBalancing | read-write | current | AC Traffic Load Balancing enable. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.5 | ScalarqtechAcTrafficLoadBalanceThreshold | read-write | current | AC Traffic Load Balancing Threshold value . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.6 | ScalarqtechAcTrafficOtherAPThresholdValue | read-write | current | other AP Traffic Threshold value . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.7 | ScalarqtechAcAPWIDSScanningMode | read-write | current | config AP WIDS scanning mode , 0: all channel scanning 1: auto select channel scanning . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.8 | ScalarqtechAcAPLegitimateMode | read-only | current | config AP Legitimate Mode value 0:legal ap 1: Illegal ap 2: Disturb AP . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.9 | ScalarqtechAcAPTreatMode | read-only | current | config Illegal AP Process mode 0:DOS attrack 1: disturb AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.10 | ScalarqtechAcAssociationFailureTotalTimes | read-only | current | The total times the association fails on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.11 | ScalarqtechAcAirIfRxTotalDataFrams | read-only | current | The air interface total Rx Data Farms on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.12 | ScalarqtechAcAirIfTxTotalDataFrams | read-only | current | The air interface total Tx Data Farms on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.13 | ScalarqtechAcAirIfTxTotalLostFrams | read-only | current | The air interface total Tx Losted Data Farms on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.14 | ScalarqtechAcAirIfTxAssociateFrams | read-only | current | The air interface total Tx Associate Farms on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.15 | ScalarqtechAcAirIfRxAssociateFrams | read-only | current | The air interface total Rx Associate Farms on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.16 | ScalarqtechAcAirIfBeaconTotalFrams | read-only | current | The air interface total Beacon Farms on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.17 | ScalarqtechAcAirIfRxTotalDataBytes | read-only | current | The air interface total Rx right Data Bytes on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.18 | ScalarqtechAcAirIfTxTotalDataBytes | read-only | current | The air interface total Tx right Data Bytes on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.19 | ScalarqtechAcAirRxFlux | read-only | current | The air interface Uplink Flux on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.1.20 | ScalarqtechAcAirTxFlux | read-only | current | The air interface Downlink Flux on AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.2 | NodeqtechInfoConfigObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.2.1 | TableqtechInfoConfigTable | not-accessible | current | ap configuration Info table. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.2.1.1 | RowqtechInfoConfigTableEntry | not-accessible | current | ap configuration Info table. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.2.1.1.1 | ColumnqtechAcAPWIDSWorkMode | read-write | current | config AP WIDS work mode, 0: WIDS disabled 1:only support monitor 2:support AP monotor and access . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.4 | NodeqtechStationConfigObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.4.1 | TableqtechConfigStaInfoTable | not-accessible | current | AC Config Station. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.4.1.1 | RowqtechConfigStaInfoTableEntry | not-accessible | current | AC Config AP Bandwith max. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.4.1.1.1 | ColumnqtechACconfigAPBandwith | read-write | current | AC Config AP Bandwith max. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6 | NodeqtechAirIfStatisticsObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1 | TableqtechAirIfInfoStatisticsTable | not-accessible | current | get air interface parameters statistics. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1 | RowqtechAirIfInfoStatisticsTableEntry | not-accessible | current | get AP Associa Fail times |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.1 | ColumnqtechRxTotalDataFrams | read-only | current | ap total Rx Data Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.2 | ColumnqtechTxTotalDataFrams | read-only | current | ap total Tx Data Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.3 | ColumnqtechTxLostDataFrams | read-only | current | ap total Tx Lost Data Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.4 | ColumnqtechTxAssociateFrams | read-only | current | ap total Tx Associate Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.5 | ColumnqtechRxAssociateFrams | read-only | current | ap total Rx Associate Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.6 | ColumnqtechBeaconFrams | read-only | current | ap Beacon Total Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.7 | ColumnqtechRxTotalDataBytes | read-only | current | ap total Rx Data Bytes. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.8 | ColumnqtechTxTotalDataBytes | read-only | current | ap total Tx Data Bytes. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.1.1.9 | ColumnqtechRESUtilization | read-only | current | ap Resource Utilization. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.2 | TableqtechAirIfTxResendDataTable | not-accessible | current | get air interface Resend Data frames. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.2.1 | RowqtechAirIfTxResendDataTableEntry | not-accessible | current | get air interface Resend Data frames |
| 1.3.6.1.4.1.27514.1.1.10.2.83.6.2.1.1 | ColumnqtechStaResendDataFrams | read-only | current | station total Resend Data Frams. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7 | NodeqtechTermServiceStatistics | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1 | NodeqtechTermServiceStatisticsWithSSID | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1 | TableqtechTermServiceStaticWithSSIDTable | not-accessible | current | get Term Service Statistics With SSID. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1 | RowqtechTermServiceStaticWithSSIDTableEntry | not-accessible | current | get Term Service Statistics With SSID |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.1 | ColumnqtechTotalUserNum | read-only | current | Total user number that have connected to the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.2 | ColumnqtechCurrentUserNum | read-only | current | Total current user number that have connected to the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.3 | ColumnqtechStaReqAccessTimes | read-only | current | station request to access to AP times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.4 | ColumnqtechRspStaAccessReqTimes | read-only | current | ap response station access request times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.5 | ColumnqtechStaAccessSucessTimes | read-only | current | sta success to connet to ap times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.6 | ColumnqtechIneffiLinkVerifyFailTime | read-only | current | Total link verify failure times due to algorithm or transform SN discrepancy. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.7 | ColumnqtechTimeoutLinkVerifyFailTime | read-only | current | Total link verify failure times due to timeout. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.8 | ColumnqtechInefficiencyLinkVerifyFailTime | read-only | current | Total link verify failure times due to inefficiency. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.9 | ColumnqtechOtherReasonLinkVerifyFailTime | read-only | current | Total link verify failure times due to other reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.10 | ColumnqtechIneffiAssociationFailTime | read-only | current | Total Association failure times due to algorithm or transform SN discrepancy. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.11 | ColumnqtechTimeoutAssociationFailTime | read-only | current | Total Association failure times due to timeout. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.12 | ColumnqtechInefficiencyAssociationFailTime | read-only | current | Total Association failure times due to inefficiency. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.13 | ColumnqtechOtherReasonAssociationFailTime | read-only | current | Total Association failure times due to other reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.14 | ColumnqtechTotalReassociationAtmptTimes | read-only | current | Total re-association attempt times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.15 | ColumnqtechTotalReassociationSuccessTimes | read-only | current | Total re-association success times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.16 | ColumnqtechIneffiReassociationFailTime | read-only | current | Total Reassociation failure times due to algorithm or transform SN discrepancy. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.17 | ColumnqtechTimeoutReassociationFailTime | read-only | current | Total Reassociation failure times due to timeout. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.18 | ColumnqtechInefficiencyReassociationFailTime | read-only | current | Total Reassociation failure times due to inefficiency. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.19 | ColumnqtechOtherReasonReassociationFailTime | read-only | current | Total Reassociation failure times due to other reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.20 | ColumnqtechTotalIdentificationAtmptTimes | read-only | current | Total Identification attempt times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.21 | ColumnqtechTotalIdentificationSuccessTimes | read-only | current | Total Identification success times. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.22 | ColumnqtechPwdErrorIdentifyFailTime | read-only | current | Total identification failure times due to password error. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.23 | ColumnqtechIneffiIdentificationFailTime | read-only | current | Total Identification failure times due to algorithm or transform SN discrepancy. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.24 | ColumnqtechTimeoutIdentificationFailTime | read-only | current | Total Identification failure times due to timeout. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.25 | ColumnqtechInefficiencyIdentificationFailTime | read-only | current | Total Identification failure times due to inefficiency. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.26 | ColumnqtechOtherReasonIdentificationFailTime | read-only | current | Total Identification failure times due to other reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.27 | ColumnqtechTotalRemoveLinkVerifyFailTimes | read-only | current | Total failure times of removing link verification. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.28 | ColumnqtechLeaveAPCoverageRemoveLinkVerifyFailTimes | read-only | current | Total failure times due to leaving AP coverage area. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.29 | ColumnqtechInefficiencyRemoveLinkVerifyFailTime | read-only | current | Total remove link failure times due to inefficiency. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.30 | ColumnqtechLinkVerifyFailRemoveLinkVerifyFailTime | read-only | current | Total remove link failure times due to link verify failure. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.31 | ColumnqtechOtherReasonRemoveLinkVerifyFailTime | read-only | current | Total remove link failure times due to other reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.32 | ColumnqtechTotalRemoveLinkAssociationTimes | read-only | current | Total failure times of removing association. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.33 | ColumnqtechLeaveAPCoverageRemoveAssociationFailTimes | read-only | current | Total remove association failure times due to leaving AP coverage area. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.34 | ColumnqtechInefficiencyRemoveAssociationFailTime | read-only | current | Total remove association failure times due to inefficiency. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.35 | ColumnqtechAssociationFailRemoveAssociationFailTime | read-only | current | Total remove association failure times due to link verify failure. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.1.1.1.36 | ColumnqtechOtherReasonRemoveAssociationFailTime | read-only | current | Total remove association failure times due to other reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.2 | NodeqtechTermServiceStatisticsWithAP | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.2.1 | TableqtechTermServiceStaticWithAPTable | not-accessible | current | get Term Service Statistics With AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.2.1.1 | RowqtechTermServiceStaticWithAPTableEntry | not-accessible | current | get Term Service Statistics With AP |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.2.1.1.1 | ColumnqtechUserAccumulateTime | read-only | current | Total accumulation time of all users that have connected to the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.2.1.1.2 | ColumnqtechAssociaFailTimes | read-only | current | Total Associate Fail times for the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3 | NodeqtechTermServiceSTatisticsWithStation | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1 | TableqtechTermServiceStationWithStationTable | not-accessible | current | Statistic of user MAC address by SSID. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1 | RowqtechTermServiceStationWithStationTableEntry | not-accessible | current | The entry of apTermServiceStationWithStationTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.2 | ColumnqtechStaAssociateTime | read-only | current | station Associate to ap time ,unit is minute. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.3 | ColumnqtechRxStaDataFrams | read-only | current | ap Rx station Data Frames . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.4 | ColumnqtechRXStaErrorFrams | read-only | current | ap Rx station Error Frames . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.5 | ColumnqtechTxStaDataFrams | read-only | current | ap Tx station Data Frames . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.6 | ColumnqtechReSendDataFrams | read-only | current | ap Resend station Data Frames . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.7 | ColumnqtechStaRxAvgSpeed | read-only | current | ap Send to station average DATA speed . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.8 | ColumnqtechStaTxAvgSpeed | read-only | current | ap Send from station average DATA speed . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.9 | ColumnqtechStaThroughput | read-only | current | station Throughput . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.10 | ColumnqtechStaSignalStrength | read-only | current | ap receive station signal strength . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.7.3.1.1.11 | ColumnqtechStaSignalNoise | read-only | current | ap receive station signal noise . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8 | NodeqtechDOT11WIDSParamObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1 | TableqtechDot11WIDSInfoTable | not-accessible | current | The table used to acac the configuration information of ac/ac. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1 | RowqtechDot11WIDSInfoEntry | not-accessible | current | The entry of the table used to acac the configuration information of ac/ac. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.1 | ColumnqtechDot11WIDSLocalIndex | not-accessible | current | The dot11 wids local index num . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.2 | ColumnqtechDot11WIDSpermittedSSID | read-only | current | The ssid permitted to access the service. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.3 | ColumnqtechDot11WIDSpermitBSSID | read-only | current | The bssid permitted to access the service. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.4 | ColumnqtechDot11WIDSDeviceOUI | read-only | current | The OUI whose device is permitted to provide the service. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.5 | ColumnqtechDot11WIDSSuspiciousAPBSS | read-only | current | The BSS MAC of the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.6 | ColumnqtechDot11WIDSSuspiciousAPCount | read-only | current | The count of the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.7 | ColumnqtechDot11WIDSMomentFirstTimeDetectedSusAP | read-only | current | The moment when the AP is detected as the Suspicious AP at the first time. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.8 | ColumnqtechDot11WIDSMomentLastTimeDetectedSusAP | read-only | current | The moment when the AP is detected as the Suspicious AP at the last time. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.9 | ColumnqtechDot11WIDSSuspiciousAPSSID | read-only | current | The SSID of the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.10 | ColumnqtechDot11WIDSSuspiciousAPMaxSignalStrength | read-only | current | The max signal strength of the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.11 | ColumnqtechDot11WIDSSuspiciousAPUsingChannel | read-only | current | The channel the Suspicious AP is in. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.12 | ColumnqtechDot11WIDSSuspiciousAPFrameEncrption | read-only | current | The frame encrption of the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.13 | ColumnqtechDot11WIDSSuspiciousAPNeedsDealingTag | read-only | current | The tag telling whether it needs to deal the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.14 | ColumnqtechDot11WIDSSuspiciousAPIgnoredTag | read-only | current | The tag telling whether to ignore the Suspicious AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.15 | ColumnqtechDot11WIDSSuspiciousSTAMAC | read-only | current | The MAC of the the Suspicious STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.16 | ColumnqtechDot11WIDSAPCountDetectingSuspiciousSTA | read-only | current | The AP count which is detecting the Suspicious STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.17 | ColumnqtechDot11WIDSMomentFirstTimeDetectedSusSTA | read-only | current | The moment when the STA is detected as the Suspicious STA at the first time. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.18 | ColumnqtechDot11WIDSMomentLastTimeDetectedSusSTA | read-only | current | The moment when the AP is detected as the Suspicious AP at the last time. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.19 | ColumnqtechDot11WIDSBSSIDSuspiciousSTAAccessing | read-only | current | The BSSID which the the Suspicious STA is trying to access. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.20 | ColumnqtechDot11WIDSSuspiciousSTAMaxSignalStrength | read-only | current | The max signal strength of the Suspicious STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.21 | ColumnqtechDot11WIDSSuspiciousSTAUsingChannel | read-only | current | The channel the Suspicious sta is in. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.22 | ColumnqtechDot11WIDSSuspiciousSTAWorksInAdhocMode | read-only | current | The tag whether the Suspicious STA is working in the Ad hoc mode. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.23 | ColumnqtechDot11WIDSSuspiciousSTANeedsDealingTag | read-only | current | The tag telling whether it needs to deal the Suspicious STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.24 | ColumnqtechDot11WIDSSuspiciousSTAIgnoredTag | read-write | current | The tag telling whether to ignore the Suspicious STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.25 | ColumnqtechDot11WIDSFloodAttackDetectSwitch | read-write | current | This tag tells whether to enable flooding attack detecting. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.26 | ColumnqtechDot11WIDSSpoofAttackDetectSwitch | read-write | current | This tag tells whether to enable spoof attack detecting. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.27 | ColumnqtechDot11WIDSWeakIVDetectSwitch | read-write | current | This tag tells whether to enable weak IV detecting. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.28 | ColumnqtechDot11WIDSClearIllegalEquipmentHistroyTag | read-write | current | This tag tells whether to clear the illegal equipment history. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.29 | ColumnqtechDot11WIDSClearAttackDetectionHistroyTag | read-write | current | This tag tells whether to clear the attack detection history. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.1.1.30 | ColumnqtechDot11WIDSClearAttackDetectionStaticsTag | read-write | current | This tag tells whether to clear the attack detection statics. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2 | TableqtechDot11LawlessApInfoTable | not-accessible | current | The table used to display Lawless AP info t |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1 | RowqtechDot11LawlessApInfoTableEntry | not-accessible | current | The table used to display Lawless AP info |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.1 | ColumnqtechLawlessAPIndex | not-accessible | current | This is Lawless AP local Index number . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.2 | ColumnqtechLawlessAPSignalStrength | read-only | current | This is Lawless AP signal Strength . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.3 | ColumnqtechLawlessAPSignalSNR | read-only | current | This is Lawless AP signal SNR . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.4 | ColumnqtechLawlessAPChannelNum | read-only | current | This is Lawless AP Channel Number . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.5 | ColumnqtechLawlessAPSSIDName | read-only | current | This is Lawless AP SSID Name display . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.6 | ColumnqtechLawlessAPMacaddr | read-only | current | This is Lawless AP BSSID <MAC_ADDRESS> . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.2.1.7 | ColumnqtechLawlessAPTreatMode | read-only | current | This is Lawless AP Treat mode detail 1: DosAttack state 2: disturb User connect to lawless AP . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3 | TableqtechDot11UndefinedApInfoTable | not-accessible | current | The table used to display Undefined AP info t |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1 | RowqtechDot11UndefinedApInfoTableEntry | not-accessible | current | The table used to display Undefined AP info |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.1 | ColumnqtechUndefinedAPIndex | not-accessible | current | This is Undefined AP local Index number . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.2 | ColumnqtechUndefinedAPSignalStrength | read-only | current | This is Undefined AP signal Strength . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.3 | ColumnqtechUndefinedAPSignalSNR | read-only | current | This is Undefined AP signal SNR . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.4 | ColumnqtechUndefinedAPChannelNum | read-only | current | This is Undefined AP Channel Number . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.5 | ColumnqtechUndefinedAPSSIDName | read-only | current | This is Undefined AP SSID Name display . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.6 | ColumnqtechUndefinedAPMacaddr | read-only | current | This is Undefined AP BSSID <MAC_ADDRESS> . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.3.1.7 | ColumnqtechUndefinedAPTreatMode | read-only | current | This is Undefined AP Treat mode detail 1: DosAttack state 2: disturb User connect to lawless AP . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4 | TableqtechDot11LegalityApInfoTable | not-accessible | current | The table used to display Legality AP info t |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1 | RowqtechDot11LegalityApInfoTableEntry | not-accessible | current | The table used to display Legality AP info |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.1 | ColumnqtechLegalityAPIndex | not-accessible | current | This is Legality AP local Index number . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.2 | ColumnqtechLegalityAPSignalStrength | read-only | current | This is Legality AP signal Strength . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.3 | ColumnqtechLegalityAPSignalSNR | read-only | current | This is Legality AP signal SNR . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.4 | ColumnqtechLegalityAPChannelNum | read-only | current | This is Legality AP Channel Number . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.5 | ColumnqtechLegalityAPSSIDName | read-only | current | This is Legality AP SSID Name display . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.6 | ColumnqtechLegalityAPMacaddr | read-only | current | This is Legality AP BSSID <MAC_ADDRESS> . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.8.4.1.7 | ColumnqtechLegalityAPTreatMode | read-only | current | This is Legality AP Treat mode detail 1: DosAttack state 2: disturb User connect to lawless AP . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10 | NodeqtechAlarmTrapsObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.1 | ScalarqtechWIDSSuspiciousType | read-write | current | Suspicious ap type , eg: nonlicet AP or disturb AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.2 | ScalarqtechWIDSSuspiciousDeviceMac | read-write | current | The macaddress of the suspicious device. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.3 | ScalarqtechWIDSSuspiciousDeviceExtensionInfo | read-write | current | The information left for the future extension. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.4 | ScalarqtechAPCurrentPMMode | read-write | current | The information for the current ap monitor workMode . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.7 | ScalarqtechChgWorkModeAPMac | read-write | current | The macaddress of the ap device. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.8 | ScalarqtechAttackType | read-write | current | The attack type string . |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.9 | ScalarqtechAttackCilentIP | read-write | current | The ipaddress of the attack client. |
| 1.3.6.1.4.1.27514.1.1.10.2.83.10.10 | ScalarqtechAttackCilentExternInfo | read-write | current | The attack extern info string . |