QTECH-WLAN-SECURITY-MIB
45 objects
Wlan security software private MIB for Qtech SNC. This is AC device manage MIB.
Imported Objects
| QTECH-AC-MGMT-MIB | qtechApgWlanId |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.61 | IdentityqtechWLANsecurityMIB | Wlan security software private MIB for Qtech SNC. This is AC device manage MIB. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.61.0 | NodeqtechWLANsecurityTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.61.0.1 | NotificationqtechWlansecurityWepDecrytErr | current | The information of an event of a wep decrytion error. | |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1 | NodeqtechWLANsecurityMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.1 | ScalarqtechAPworkmode | read-write | current | This Attribute present AP device work mode , Value 1 means Fit AP , Value 2 means Fat AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2 | TableqtechWLANsecurityConfigTable | not-accessible | current | Qtech Private WLAN security MIB |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1 | RowqtechWLANsecurityConfigEntry | not-accessible | current | An agent MAY process one or more WLAN security , which is identifed by qtechApgWlanId. In other words, wlan ID is the index of this MIB table. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.1 | ColumnqtechWLANsecrymode | read-write | current | This attribute present wlan security mode. Value 1 means open, Value 2 means static-wep,Value 3 means 802.1x-wep,Value 4 means WPA-PSK, Value 5 means WPA-802.1… |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.2 | Columnqtechstaticweplength | read-write | current | Static WEP key length,1 means WEP-40, 2 means WEP-104, 3 means WEP-128,default is 2. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.3 | Columnqtech8021xweplength | read-write | current | IEEE802.1x WEP key length,1 means WEP-40, 2 means WEP-104, 3 means WEP-128,default is 2. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.4 | ColumnqtechWPAenabled | read-write | current | Does this WLAN open WPA1 (it is not RSNA) support. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.5 | ColumnqtechWPAPairwisecipher | read-write | current | WPA1 cipher mode default is TKIP(1). |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.6 | ColumnqtechWPAakmmode | read-write | current | WPA1 AKM mode ,default is 802.1x. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.7 | ColumnqtechWPApskPassPhrase | read-write | current | WPA1 PSK password ,it is write-only. Any try to read it return FAIL. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.8 | ColumnqtechWLANsecry80211i | read-write | current | IEEE802.11i or WAPI security mode. true means IEEE802.11i, false means WAPI. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.9 | ColumnqtechWAPIasuIpaddress | read-write | current | WAPI ASU IP address. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.10 | ColumnqtechWAPIcertificateformat | read-write | current | WAPI certificate format ,1 means x509v3, 2 means WAPI-GBW. Now we only support x509v3. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.11 | ColumnqtechWAPImsrekeyClientoff | read-write | current | When one user off line, deos the WAPI sure update group keys, default is false. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.12 | ColumnqtechWAPIimportcertificate | read-write | current | Import WAPI certificate,this is write-only. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.13 | ColumnqtechWAPIcacertificatename | read-write | current | WAPI CA certificate file name, default is wapi_ca.cer. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.14 | ColumnqtechWAPIlocalcertificatename | read-write | current | WAPI Local certificate file name, default is wapi_local.cer. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.15 | ColumnqtechWAPIascertificatename | read-write | current | WAPI ASU certificate file name, default is wapi_as.cer. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.16 | ColumnqtechRSNenabled | read-write | current | RSNA (WPA2) enable or disable |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.17 | ColumnqtechRSNPairwisecipher | read-write | current | WPA2 cipher mode. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.18 | ColumnqtechRSNakmmode | read-write | current | WPA2 authen key manage mode. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.19 | ColumnqtechRSNpskPassPhrase | read-write | current | WPA2 PSK password ,it is write-only. Any try to read it return FAIL. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.20 | ColumnqtechWEPAuthenAlgorithm | read-only | current | authentication algorithms supported by the Authencator. The following are the values and the associated algorithm. Value = 1: Open System Value = 2: Shared Key |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.21 | ColumnqtechWLANsecurityStatus | read-write | current | The status column used for creating and deleting instances of the columnar objects in the default WEP key Table. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.22 | ColumnqtechACauthenMethodsupport | read-write | current | authentication method supported by the AC, including the EAP-SIM authentication, WEP authentication, EAP-MD5 authentication. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.2.1.23 | ColumnqtechWLANEAPAuthenSupport | read-write | current | Whether the current ap or ac enables or diables the EAP authentication. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.3 | TableqtechWEPDefaultKeysTable | not-accessible | current | Conceptual table for WEP default keys. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.3.1 | RowqtechWEPDefaultKeysEntry | not-accessible | current | An Entry (conceptual row) in the WEP Default Keys Table. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.3.1.1 | ColumnqtechWEPDefaultKeyIndex | not-accessible | current | The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultK… |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.3.1.2 | ColumnqtechWEPDefaultKeyValue | read-write | current | A WEP default secret key value. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.1.3.1.3 | ColumnqtechWEPDefaultKeyLength | read-write | current | A WEP default secret key length. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.2 | NodeqtechWlansecurityMIBConform | |||
| 1.3.6.1.4.1.27514.1.1.10.2.61.2.1 | NodeqtechWlansecurityMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.61.2.1.1 | ComplianceqtechWlansecurityMIBCompliance | current | The compliance statement for entities which implement the wlan security module of Qtech Ac device Manager | |
| 1.3.6.1.4.1.27514.1.1.10.2.61.2.2 | NodeqtechWlansecurityMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.61.2.2.1 | GroupqtechWlansecuritycofigGroup | current | This collection of objects represents the WLAN security private MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.61.2.2.2 | GroupqtechWEPDefaultKeysGroup | current | This collection of objects represents the WLAN WEP default keys. | |
| 1.3.6.1.4.1.27514.1.1.10.2.61.2.2.3 | GroupqtechWlansecurityTrapGroup | current | This collection of objects represents the wlan wep traps private MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.61.3 | NodeqtechWlansecurityTrapvar | |||
| 1.3.6.1.4.1.27514.1.1.10.2.61.3.1 | ScalarqtechWlansecurityWepDecrytEnableTrapVar | read-write | current | Tell the host whether need to send the trap. |
| 1.3.6.1.4.1.27514.1.1.10.2.61.3.2 | ScalarqtechWlansecurityDeviceMAC | read-write | current | MAC address of the device. |