RAD-BrgGen-MIB
318 objects
General Bridge MIB.
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePortEntry Timeout |
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBaseComponentId ieee8021BridgeBaseEntry ieee8021BridgeBasePortEntry |
| IEEE8021-MSTP-MIB MISSING | ieee8021MstpDesignatedRoot ieee8021MstpEntry ieee8021MstpTopologyChanges |
| IEEE8021-Q-BRIDGE-MIB MISSING | ieee8021QBridgeVlanStaticEntry |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber IEEE8021PbbComponentIdentifier IEEE8021VlanIndex |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | dot1qVlanStaticEntry PortList VlanId |
| RAD-GEN-MIB | alarmEventLogAlarmOrEventId alarmEventLogDateAndTime alarmEventLogDescription alarmEventLogSeverity alarmEventLogSourceName alarmEventReason |
| RAD-SMI-MIB | radBridges |
| RMON2-MIB | TimeFilter |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowPointer RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.4.0 | NodegenBridgeEvents | |||
| 1.3.6.1.4.1.164.4.0.1 | NotificationbridgeSpanningTreeNewRoot | current | This Trap indicates Bridge was elected as spanning tree root. | |
| 1.3.6.1.4.1.164.4.0.2 | NotificationbridgeSpanningTreeTopologyChange | current | This Trap indicates a Spanning Tree Topology change. | |
| 1.3.6.1.4.1.164.4.1 | IdentitygenBridge | General Bridge MIB. | ||
| 1.3.6.1.4.1.164.4.1.1 | ScalarradBridgeAction | read-write | current | This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions are not currently imple… |
| 1.3.6.1.4.1.164.4.1.2 | ScalarradBridgeInactiveArpTimeOut | read-write | current | This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del… |
| 1.3.6.1.4.1.164.4.1.3 | TableradBridgeMaskTable | not-accessible | current | Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement con… |
| 1.3.6.1.4.1.164.4.1.3.1 | RowradBridgeMaskEntry | not-accessible | current | An entry in table radBridgeMaskTable. |
| 1.3.6.1.4.1.164.4.1.3.1.1 | ColumnradBridgeMaskType | read-only | current | Defines the type of mask entry. |
| 1.3.6.1.4.1.164.4.1.3.1.2 | ColumnradBridgeMaskIfIndex | read-only | current | Specifies the if Index of the interface to which the mask is applied. |
| 1.3.6.1.4.1.164.4.1.3.1.3 | ColumnradBridgeMaskNum | read-only | current | The Mask entry number, defined by its line number in the mask table. |
| 1.3.6.1.4.1.164.4.1.3.1.4 | ColumnradBridgeMaskDest | read-write | current | Specifies the type of destination address carried by the frame to which the mask will be applied. Unassigned-condition deactivates the mask entry. |
| 1.3.6.1.4.1.164.4.1.3.1.5 | ColumnradBridgeMaskPat1 | read-write | current | Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern. |
| 1.3.6.1.4.1.164.4.1.3.1.6 | ColumnradBridgeMaskActiveBit1 | read-write | current | Specifies the positions of the wild card characters (*) in the radBridgeMaskPat1 field. |
| 1.3.6.1.4.1.164.4.1.3.1.7 | ColumnradBridgeMaskFrom1 | read-write | current | Offset base of radBridgeMaskPat1 within the frame. Net can be in some cases the data start point. |
| 1.3.6.1.4.1.164.4.1.3.1.8 | ColumnradBridgeMaskOffset1 | read-write | current | Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in … |
| 1.3.6.1.4.1.164.4.1.3.1.9 | ColumnradBridgeMaskCond1 | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.3.1.10 | ColumnradBridgeMaskPat2 | read-write | current | Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern. |
| 1.3.6.1.4.1.164.4.1.3.1.11 | ColumnradBridgeMaskActiveBit2 | read-write | current | Specifies the positions of the wild card characters (*) in the radBridgeMaskPat2 field. |
| 1.3.6.1.4.1.164.4.1.3.1.12 | ColumnradBridgeMaskFrom2 | read-write | current | Offset base of radBridgeMaskPat2 within the frame. Net can be in some cases the data start point. |
| 1.3.6.1.4.1.164.4.1.3.1.13 | ColumnradBridgeMaskOffset2 | read-write | current | Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in … |
| 1.3.6.1.4.1.164.4.1.3.1.14 | ColumnradBridgeMaskCond2 | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.3.1.15 | ColumnradBridgeMaskPat3 | read-write | current | Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern. |
| 1.3.6.1.4.1.164.4.1.3.1.16 | ColumnradBridgeMaskActiveBit3 | read-write | current | Specifies the positions of the wild card characters (*) in the radBridgeMaskPat3 field. |
| 1.3.6.1.4.1.164.4.1.3.1.17 | ColumnradBridgeMaskFrom3 | read-write | current | Offset base of radBridgeMaskPat3 within the frame. Net can be in some cases the data start point. |
| 1.3.6.1.4.1.164.4.1.3.1.18 | ColumnradBridgeMaskOffset3 | read-write | current | Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in… |
| 1.3.6.1.4.1.164.4.1.3.1.19 | ColumnradBridgeMaskCond3 | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.3.1.20 | ColumnradBridgeMaskOper | read-write | current | The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove… |
| 1.3.6.1.4.1.164.4.1.4 | NoderadBridgeCOD | |||
| 1.3.6.1.4.1.164.4.1.4.1 | TableradBridgeCODParamTable | not-accessible | current | The table of COD parameters |
| 1.3.6.1.4.1.164.4.1.4.1.1 | RowradBridgeCODEntry | not-accessible | current | Each radBridgeCODEntry consists of the following parameters |
| 1.3.6.1.4.1.164.4.1.4.1.1.1 | ColumnradBridgeCODIfIndex | read-only | current | The interface to which this COD entry is applicable. |
| 1.3.6.1.4.1.164.4.1.4.1.1.2 | ColumnradBridgeCODManualConnect | read-write | current | The management station can start connection manually by setting this parameter |
| 1.3.6.1.4.1.164.4.1.4.1.1.3 | ColumnradBridgeCODMode | read-write | current | In answer mode only one incoming call may be accepted at a time. Other nodes attempting to access the local modem will receive a busy signal until the connecti… |
| 1.3.6.1.4.1.164.4.1.4.1.1.4 | ColumnradBridgeCODConnectDelay | read-write | current | The connect delay defines the minimum time period that the link must stay disconnected, between 2 succesive connections (in seconds). |
| 1.3.6.1.4.1.164.4.1.4.1.1.5 | ColumnradBridgeCODisConnectDelay | read-write | current | The disconnect delay defines the minimum time period the link must stay connected, between 2 succesive disconnections (in seconds). |
| 1.3.6.1.4.1.164.4.1.4.1.1.6 | ColumnradBridgeCODImplicitSwitch | read-write | current | The inplicit switch allows the user to ignore implicit triggers provided by the COD software. |
| 1.3.6.1.4.1.164.4.1.4.1.1.7 | ColumnradBridgeCODNumAccess | read-only | current | The number of successful connections that have been established since the COD has been reset. |
| 1.3.6.1.4.1.164.4.1.4.1.1.8 | ColumnradBridgeCODTotalConnecTime | read-only | current | The sum of all the connect time intervals since the COD was reset. |
| 1.3.6.1.4.1.164.4.1.4.2 | TableradBridgeCODTimeTriggerTable | not-accessible | current | The table of COD parameters |
| 1.3.6.1.4.1.164.4.1.4.2.1 | RowradBridgeCODTimeTriggerEntry | not-accessible | current | Each radBridgeCODTimeTriggerEntry consists of the following parameters |
| 1.3.6.1.4.1.164.4.1.4.2.1.1 | ColumnradBridgeCODTimeIfIndex | read-only | current | The interface to which this COD Time Trigger entry is applicable. |
| 1.3.6.1.4.1.164.4.1.4.2.1.2 | ColumnradBridgeCODDay | read-only | current | The day of the week in which the dial up connection operates. |
| 1.3.6.1.4.1.164.4.1.4.2.1.3 | ColumnradBridgeCODTimeTriggerNum | read-only | current | Every day of the week the user can configure 3 dial up connections. |
| 1.3.6.1.4.1.164.4.1.4.2.1.4 | ColumnradBridgeCODTimeTriggerFrom | read-write | current | Time to start Dial Up connection, in format hh:mm. |
| 1.3.6.1.4.1.164.4.1.4.2.1.5 | ColumnradBridgeCODTimeTriggerTo | read-write | current | Time to terminate Dial Up connection, in format HH:MM. |
| 1.3.6.1.4.1.164.4.1.4.2.1.6 | ColumnradBridgeCODTimeTriggerStatus | read-write | current | The status of a table entry. |
| 1.3.6.1.4.1.164.4.1.4.3 | NoderadBridgeCODTraffic | |||
| 1.3.6.1.4.1.164.4.1.4.3.1 | TableradBridgeCODTrafficTable | not-accessible | current | The table of COD Traffic trigger |
| 1.3.6.1.4.1.164.4.1.4.3.1.1 | RowradBridgeCODTrafficEntry | not-accessible | current | Each radBridgeCODTrafficEntry consists of the following parameters. |
| 1.3.6.1.4.1.164.4.1.4.3.1.1.1 | ColumnradBridgeCODProtocolType | read-only | current | The Protocol Type of the Traffic Table |
| 1.3.6.1.4.1.164.4.1.4.3.1.1.2 | ColumnradBridgeCODTrafficTriggerStatus | read-write | current | Command of Status of the Protocol Traffic Trigger |
| 1.3.6.1.4.1.164.4.1.4.3.2 | ScalarradBridgeCODRemoteIPAddr | read-write | current | This is the Remote IP Address |
| 1.3.6.1.4.1.164.4.1.4.3.3 | ScalarradBridgeCODIPMask | read-write | current | This is the Mask of the Remote IP Address |
| 1.3.6.1.4.1.164.4.1.4.3.4 | ScalarradBridgeCODTrafficTriggerProtType | read-write | current | Protocol Type for the User Defined Protocol Traffic Trigger (3). |
| 1.3.6.1.4.1.164.4.1.4.4 | TableradBridgeCODCondTable | not-accessible | current | The table of COD Condition parameters |
| 1.3.6.1.4.1.164.4.1.4.4.1 | RowradBridgeCODCondEntry | not-accessible | current | Each radBridgeCODCondEntry consists of the following parameters |
| 1.3.6.1.4.1.164.4.1.4.4.1.1 | ColumnradBridgeCODCondIfIndex | read-only | current | The interface, this COD entry is applicable to. |
| 1.3.6.1.4.1.164.4.1.4.4.1.2 | ColumnradBridgeCODOriginateConnectCondition | read-write | current | This condition, allows the user to specify the condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When… |
| 1.3.6.1.4.1.164.4.1.4.4.1.3 | ColumnradBridgeCODOriginateDisConnectCondition | read-write | current | This condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan… |
| 1.3.6.1.4.1.164.4.1.4.4.1.4 | ColumnradBridgeCODOriginateDisConnectDelay | read-write | current | Delay time in seconds. |
| 1.3.6.1.4.1.164.4.1.4.4.1.5 | ColumnradBridgeCODAnswerConnectCondition | read-write | current | CODCondAnswerConnect allows the user to specify the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan … |
| 1.3.6.1.4.1.164.4.1.4.4.1.6 | ColumnradBridgeCODSpecificOnTrafficOIDCondition | read-only | current | A reference to a specific entry in the radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic… |
| 1.3.6.1.4.1.164.4.1.4.4.1.7 | ColumnradBridgeCODDisConnectMinimunFramesNumber | read-write | current | Frames rate. |
| 1.3.6.1.4.1.164.4.1.5 | NoderadBridgeIPX | |||
| 1.3.6.1.4.1.164.4.1.5.1 | NoderadBridgeIPXdriver | |||
| 1.3.6.1.4.1.164.4.1.5.1.1 | ScalarradBridgeIPXForwarding | read-write | current | The indication of whether this entity is acting as an IPX gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPX… |
| 1.3.6.1.4.1.164.4.1.5.2 | NoderadBridgeIPXRip | |||
| 1.3.6.1.4.1.164.4.1.5.2.1 | ScalarradBridgeIPXRipOutPackets | read-only | current | The total number of packets transmitted by RIP. |
| 1.3.6.1.4.1.164.4.1.5.2.2 | ScalarradBridgeIPXRipInPackets | read-only | current | The total number of packets received by RIP. This will include any packets that are subsequently discarded. |
| 1.3.6.1.4.1.164.4.1.5.2.3 | ScalarradBridgeIPXRipInDiscards | read-only | current | The number of received packets discarded by RIP. |
| 1.3.6.1.4.1.164.4.1.5.2.4 | ScalarradBridgeIPXRipTblNoOfEntries | read-only | current | The max number of entries that exist in the RIP routing table. |
| 1.3.6.1.4.1.164.4.1.5.2.5 | ScalarradBridgeIPXRipTblBcastTrigUpdateInterval | read-write | current | The default time interval (in seconds)between triggered RIP updates on a broadcast type interface. A triggered update occurs when a change is detected in the r… |
| 1.3.6.1.4.1.164.4.1.5.2.6 | TableradBridgeIPXRipTable | not-accessible | current | The routing table used by RIP to calculate routes to remote desination networks. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1 | RowradBridgeIPXRipTableEntry | not-accessible | current | The routing information for one of this entity's destination networks. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.1 | ColumnradBridgeIPXRipDestNetwork | read-only | current | The destination network address to which this entry's routing information pertains. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.2 | ColumnradBridgeIPXRipPolicy | read-only | current | A value specifying the precidence of the route. A value of zero means that the route is the best route, a value of one means that the route is the second best … |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.3 | ColumnradBridgeIPXRipForwardingRouter | read-write | current | The IPX node address of the next hop (router) for the entry's associated destination network. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.4 | ColumnradBridgeIPXRipNIC | read-write | current | An interface identifier specifying what IPX interface the next hop can be found on. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.5 | ColumnradBridgeIPXRipTickMetric | read-write | current | The metric, in terms of transit time, associated with the route given by the entry. This time is in terms of 1/18ths of a second. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.6 | ColumnradBridgeIPXRipHopMetric | read-write | current | The metric, in terms of distance , associated with the route given by the entry. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.7 | ColumnradBridgeIPXRipAgingTime | read-only | current | The last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime. |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.8 | ColumnradBridgeIPXRipValueStatus | read-write | current | The entry status value; whether the entry is permanent (added statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDy… |
| 1.3.6.1.4.1.164.4.1.5.2.6.1.9 | ColumnradBridgeIPXRipForwardType | read-write | current | The type of route. Note that local(2) refers to a route for which the next hop is the final destination; remote(3) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.164.4.1.5.2.7 | TableradBridgeIPXRipInfTable | not-accessible | current | The RIP interface table. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1 | RowradBridgeIPXRipInfEntry | not-accessible | current | Each entry corresponds to one ifindex. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1.1 | ColumnradBridgeIPXRipInfIfIndex | read-only | current | This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1.2 | ColumnradBridgeIPXRipInfBcastUpdate | read-write | current | The RIP periodic update interval, in seconds. Zero value corresponds to infinite interval. |
| 1.3.6.1.4.1.164.4.1.5.2.7.1.3 | ColumnradBridgeIPXRipInfAgeMultiplier | read-write | current | The holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time. |
| 1.3.6.1.4.1.164.4.1.5.3 | NoderadBridgeIPXSap | |||
| 1.3.6.1.4.1.164.4.1.5.3.1 | ScalarradBridgeIPXSapOutPackets | read-only | current | The total number of packets transmitted by SAP. |
| 1.3.6.1.4.1.164.4.1.5.3.2 | ScalarradBridgeIPXSapInPackets | read-only | current | The total number of packets received by SAP. This will include any packets that are subsequently discarded. |
| 1.3.6.1.4.1.164.4.1.5.3.3 | ScalarradBridgeIPXSapInDiscards | read-only | current | The number of received packets discarded by SAP. |
| 1.3.6.1.4.1.164.4.1.5.3.4 | ScalarradBridgeIPXSapTblNoOfEntries | read-only | current | The max number of entries that exist in the SAP Server Information table. |
| 1.3.6.1.4.1.164.4.1.5.3.5 | ScalarradBridgeIPXSapTblBcastTrigUpdateInterval | read-write | current | The default time interval (in seconds) between triggered SAP updates on a broadcast style interface. A triggered update occurs when a change is detected in the… |
| 1.3.6.1.4.1.164.4.1.5.3.6 | TableradBridgeIPXSapTable | not-accessible | current | The Server Information table is used by SAP to store information of services which are available on the internetwork. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1 | RowradBridgeIPXSapTableEntry | not-accessible | current | The server information for one of this entity's server entries. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.1 | ColumnradBridgeIPXSapServerType | read-only | current | The type of the server for which this entry pertains. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.2 | ColumnradBridgeIPXSapName | read-only | current | The name of the server for which this entry pertains. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.3 | ColumnradBridgeIPXSapNetwork | read-write | current | The IPX network address of the host on which this server exists. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.4 | ColumnradBridgeIPXSapNode | read-write | current | The IPX node address of the host on which this server exists. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.5 | ColumnradBridgeIPXSapSocket | read-write | current | The IPX socket number that is being used by the server to which this entry pertains. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.6 | ColumnradBridgeIPXSapHopsToServer | read-write | current | The number of hops to the entity on which this server exists. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.7 | ColumnradBridgeIPXSapNIC | read-write | current | An Network Interface Card identifier specifying what IPX interface the next hop can be found on. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.8 | ColumnradBridgeIPXSapAgingTime | read-only | current | The last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime. |
| 1.3.6.1.4.1.164.4.1.5.3.6.1.9 | ColumnradBridgeIPXSapStatus | read-write | current | The status of the entry. |
| 1.3.6.1.4.1.164.4.1.5.3.7 | TableradBridgeIPXSapInfTable | not-accessible | current | The Sap interface table. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1 | RowradBridgeIPXSapInfEntry | not-accessible | current | Each entry corresponds to one ifindex. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1.1 | ColumnradBridgeIPXSapInfIfIndex | read-only | current | This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1.2 | ColumnradBridgeIPXSapInfBcastUpdate | read-write | current | The SAP periodic update interval, in seconds. Zero value corresponds to infinite interval. |
| 1.3.6.1.4.1.164.4.1.5.3.7.1.3 | ColumnradBridgeIPXSapInfAgeMultiplier | read-write | current | The holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time. |
| 1.3.6.1.4.1.164.4.1.6 | NodenewMasking | |||
| 1.3.6.1.4.1.164.4.1.6.1 | ScalarmaskingMaxEntries | read-only | current | The maximum number of entries in the masking table. |
| 1.3.6.1.4.1.164.4.1.6.2 | ScalarmaskingCurrentEntries | read-only | current | The number of entries in the mask table. |
| 1.3.6.1.4.1.164.4.1.6.3 | TablemaskingTable | not-accessible | current | This is the new masking scheme. Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this ta… |
| 1.3.6.1.4.1.164.4.1.6.3.1 | RowmaskingEntry | not-accessible | current | Defines the contents of each line in the mask table. |
| 1.3.6.1.4.1.164.4.1.6.3.1.1 | ColumnmaskingType | read-only | current | Defines the type of mask entry. |
| 1.3.6.1.4.1.164.4.1.6.3.1.2 | ColumnmaskingIfIndex | read-only | current | Specifies the ifIndex of the interface to which the mask is applied. |
| 1.3.6.1.4.1.164.4.1.6.3.1.3 | ColumnmaskingIndex | read-only | current | An index to the masking table. This number should not be greater than maskingMaxEntries |
| 1.3.6.1.4.1.164.4.1.6.3.1.4 | ColumnmaskingProtocolType | read-write | current | The base protocol for masking. IPX, IP, others. |
| 1.3.6.1.4.1.164.4.1.6.3.1.5 | ColumnmaskingSmartMaskOID | read-only | current | A reference to a specific Smart mask table (old radBridgeMaskTable) which enables a more specific mask type. If this information is not available, its value sh… |
| 1.3.6.1.4.1.164.4.1.6.3.1.6 | ColumnmaskingFrameType | read-write | current | Enables the user to decide about frame type * all frame * just broadcast * just multicast. |
| 1.3.6.1.4.1.164.4.1.6.3.1.7 | ColumnmaskingFrameTypeCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingFrameType the packet contains data that m… |
| 1.3.6.1.4.1.164.4.1.6.3.1.8 | ColumnmaskingSourceAddress | read-write | current | The source address is according to the maskingMacOrNet and maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of… |
| 1.3.6.1.4.1.164.4.1.6.3.1.9 | ColumnmaskingSourceActiveBits | read-write | current | Specifies the positions of the wild card characters (*) in the maskingSourceAddress field. Only the 1's bit will be taken in considerations. |
| 1.3.6.1.4.1.164.4.1.6.3.1.10 | ColumnmaskingSourceMacOrNet | read-write | current | The variable maskingSourceAddress and maskingSourceActiveBits will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec o… |
| 1.3.6.1.4.1.164.4.1.6.3.1.11 | ColumnmaskingSourceCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskin… |
| 1.3.6.1.4.1.164.4.1.6.3.1.12 | ColumnmaskingDestAddress | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination a… |
| 1.3.6.1.4.1.164.4.1.6.3.1.13 | ColumnmaskingDestActiveBits | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the pos… |
| 1.3.6.1.4.1.164.4.1.6.3.1.14 | ColumnmaskingDestMacOrNet | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProto… |
| 1.3.6.1.4.1.164.4.1.6.3.1.15 | ColumnmaskingDestCondition | read-write | current | If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the log… |
| 1.3.6.1.4.1.164.4.1.6.3.1.16 | ColumnmaskingLowLevelProt | read-write | current | This field is set in conjunction with the maskingProtocolType variable. This variable specifies the low level protocol. The IPX socket entered in maskingDestAd… |
| 1.3.6.1.4.1.164.4.1.6.3.1.17 | ColumnmaskingLowLevelProtCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data tha… |
| 1.3.6.1.4.1.164.4.1.6.3.1.18 | ColumnmaskingHighLevelProt | read-write | current | This field is set in connection to the maskingProtocolType variable. This variable specifies the high level protocols (application). As for today it supports j… |
| 1.3.6.1.4.1.164.4.1.6.3.1.19 | ColumnmaskingHighLevelProtCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data th… |
| 1.3.6.1.4.1.164.4.1.6.3.1.20 | ColumnmaskingPortNum | read-write | current | The port number is the same as in high level protocol. It specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This o… |
| 1.3.6.1.4.1.164.4.1.6.3.1.21 | ColumnmaskingPortNumCondition | read-write | current | Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingPortNum the packet contains data that mat… |
| 1.3.6.1.4.1.164.4.1.6.3.1.22 | ColumnmaskingOperation | read-write | current | The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove… |
| 1.3.6.1.4.1.164.4.1.6.3.1.23 | ColumnmaskingSrcPortNum | read-write | current | The source port number. For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and mask… |
| 1.3.6.1.4.1.164.4.1.6.3.1.24 | ColumnmaskingSrcPortNumCondition | read-write | current | The same as 'maskingPortNumCondition'. Relates to source port. |
| 1.3.6.1.4.1.164.4.1.7 | NoderadBridgePerformance | |||
| 1.3.6.1.4.1.164.4.1.7.1 | TableradBridgeCurrentTable | not-accessible | current | The RAD Bridge Current table. |
| 1.3.6.1.4.1.164.4.1.7.1.1 | RowradBridgeCurrentEntry | not-accessible | current | An entry in the RAD Bridge Current table. |
| 1.3.6.1.4.1.164.4.1.7.1.1.1 | ColumnradBridgeCurrentIndex | read-only | current | The index of the Bridge interface or Bridge Port. It may be ifIndex. |
| 1.3.6.1.4.1.164.4.1.7.1.1.2 | ColumnradBridgeCurrentIngressFilteringDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.3 | ColumnradBridgeCurrentFrameTypeDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in the current 15 minute int… |
| 1.3.6.1.4.1.164.4.1.7.1.1.4 | ColumnradBridgeCurrentRxCorrectFrames | read-only | current | The counter associated with the number of Received Correct Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.5 | ColumnradBridgeCurrentRxCorrectBytes | read-only | current | The counter associated with the number of Received Correct Bytes, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.6 | ColumnradBridgeCurrentRxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeCurrentRxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.1.1.7 | ColumnradBridgeCurrentRxBcastFrames | read-only | current | The counter associated with the number of Received Broadcast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.8 | ColumnradBridgeCurrentRxMcastFrames | read-only | current | The counter associated with the number of Received Multicast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.9 | ColumnradBridgeCurrentTxCorrectFrames | read-only | current | The counter associated with the number of Transmitted Correct Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.10 | ColumnradBridgeCurrentTxCorrectBytes | read-only | current | The counter associated with the number of Transmitted Correct Bytes, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.11 | ColumnradBridgeCurrentTxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeCurrentTxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.1.1.12 | ColumnradBridgeCurrentTxBcastFrames | read-only | current | The counter associated with the number of Transmitted Broadcast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.13 | ColumnradBridgeCurrentTxMcastFrames | read-only | current | The counter associated with the number of Transmitted Multicast Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.1.1.14 | ColumnradBridgeCurrentTxDropFrames | read-only | current | The counter associated with the number of Transmitted Dropped Frames, encountered by a Bridge Port in the current 15 minute interval. |
| 1.3.6.1.4.1.164.4.1.7.2 | TableradBridgeIntervalTable | not-accessible | current | The RAD Bridge Interval table. |
| 1.3.6.1.4.1.164.4.1.7.2.1 | RowradBridgeIntervalEntry | not-accessible | current | An entry in the RAD Bridge Interval table. |
| 1.3.6.1.4.1.164.4.1.7.2.1.1 | ColumnradBridgeIntervalIndex | read-only | current | The index of the bridge interface or Bridge Port. It may be ifIndex. |
| 1.3.6.1.4.1.164.4.1.7.2.1.2 | ColumnradBridgeIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.4.1.7.2.1.3 | ColumnradBridgeIntervalIngressFilteringDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in one of the previous 96, individual 15 m… |
| 1.3.6.1.4.1.164.4.1.7.2.1.4 | ColumnradBridgeIntervalFrameTypeDiscardedFrames | read-only | current | The counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in one of the previous 96, i… |
| 1.3.6.1.4.1.164.4.1.7.2.1.5 | ColumnradBridgeIntervalRxCorrectFrames | read-only | current | The counter associated with the number of Received Correct Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.6 | ColumnradBridgeIntervalRxCorrectBytes | read-only | current | The counter associated with the number of Received Correct Bytes, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.7 | ColumnradBridgeIntervalRxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeIntervalRxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.2.1.8 | ColumnradBridgeIntervalRxBcastFrames | read-only | current | The counter associated with the number of Received Broadcast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.9 | ColumnradBridgeIntervalRxMcastFrames | read-only | current | The counter associated with the number of Received Multicast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.10 | ColumnradBridgeIntervalTxCorrectFrames | read-only | current | The counter associated with the number of Transmitted Correct Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.11 | ColumnradBridgeIntervalTxCorrectBytes | read-only | current | The counter associated with the number of Transmitted Correct Bytes, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.12 | ColumnradBridgeIntervalTxCorrectBytesHCOverflow | read-only | current | The counter associated with the number of times the associated radBridgeIntervalTxCorrectBytes counter has overflowed. |
| 1.3.6.1.4.1.164.4.1.7.2.1.13 | ColumnradBridgeIntervalTxBcastFrames | read-only | current | The counter associated with the number of Transmitted Broadcast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.14 | ColumnradBridgeIntervalTxMcastFrames | read-only | current | The counter associated with the number of Transmitted Multicast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.7.2.1.15 | ColumnradBridgeIntervalTxDropFrames | read-only | current | The counter associated with the number of Transmitted Dropped Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.4.1.8 | NoderadBridgePortBaseVlan | |||
| 1.3.6.1.4.1.164.4.1.8.1 | TableradBridgePortBaseVlanTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by management. All entries are permanent and will be restored afte… |
| 1.3.6.1.4.1.164.4.1.8.1.1 | RowradBridgePortBaseVlanEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.164.4.1.8.1.1.1 | ColumnradBridgePortBaseVlanCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.4.1.8.1.1.2 | ColumnradBridgePortBaseVlanIdx | not-accessible | current | Index of the port based VLAN. |
| 1.3.6.1.4.1.164.4.1.8.1.1.3 | ColumnradBridgePortBaseVlanName | read-create | current | An administratively assigned string, which may be used to identify the the port based VLAN. |
| 1.3.6.1.4.1.164.4.1.8.1.1.4 | ColumnradBridgePortBaseVlanEgressPorts | read-create | current | The set of ports which are permanently assigned to the egress list for this port based VLAN by management. The default value of this object is a string of zero… |
| 1.3.6.1.4.1.164.4.1.8.1.1.5 | ColumnradBridgePortBaseVlanVirtualGroups | read-create | current | The set of Virtual Groups which are permanently assigned to this port based VLAN by management. (read Virtual Group instead of port in PortList Textual Convent… |
| 1.3.6.1.4.1.164.4.1.8.1.1.6 | ColumnradBridgePortBaseVlanRowStatus | read-create | current | This object enable user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.1.8.1.1.7 | ColumnradBridgePortBaseVlanMng | read-create | current | This object allows user to enable/disable management traffic on this VLAN. disable - only non-management data is allowed. enable - mixture of management traffi… |
| 1.3.6.1.4.1.164.4.1.8.2 | TableradBridgePortVlanMemberTable | not-accessible | current | The Bridge Ports-VLAN Membership table. This table enables the user to assign: - Several VLANs to a Port. - Several Ports to a VLAN. |
| 1.3.6.1.4.1.164.4.1.8.2.1 | RowradBridgePortVlanMemberEntry | not-accessible | current | An entry in the Bridge Ports-VLANs Memebership table. |
| 1.3.6.1.4.1.164.4.1.8.2.1.1 | ColumnradBridgePortVlanMemberBridgeIdx | read-only | current | This object indicates the Bridge Index. |
| 1.3.6.1.4.1.164.4.1.8.2.1.2 | ColumnradBridgePortVlanMemberPortIdx | read-only | current | This object indicates the Bridge's Port Index. For some cases, it can be used as the Port ofIndex. |
| 1.3.6.1.4.1.164.4.1.8.2.1.3 | ColumnradBridgePortVlanMemberVlanId | read-only | current | This object indicates the VLAN ID. |
| 1.3.6.1.4.1.164.4.1.8.2.1.4 | ColumnradBridgePortVlanMemberRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.1.9 | NoderadBridgeGenCnfg | |||
| 1.3.6.1.4.1.164.4.1.9.1 | TableradBridgeGenFlowTable | not-accessible | current | A table containing static configuration information for Bridge configured into the device by (local or network) management. All entries are permanent and will … |
| 1.3.6.1.4.1.164.4.1.9.1.1 | RowradBridgeGenFlowEntry | not-accessible | current | Static information for a Bridge configured into the device by management. |
| 1.3.6.1.4.1.164.4.1.9.1.1.1 | ColumnradBridgeGenFlowCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant Set is done only to this configuration). For Age… |
| 1.3.6.1.4.1.164.4.1.9.1.1.2 | ColumnradBridgeGenFlowIdx | not-accessible | current | For Agent having more than one bridge, this index may be used as bridge index |
| 1.3.6.1.4.1.164.4.1.9.1.1.3 | ColumnradBridgeGenFlowRowStatus | read-create | current | This object enable user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.1.9.1.1.4 | ColumnradBridgeGenFlowFloodOrBcastMaxRate | read-create | current | This object controls maximum Flooding or Broadcast Rate: Max number of multicast along with unknown or flooded unicast frames allowed to enter any port. The nu… |
| 1.3.6.1.4.1.164.4.1.9.1.1.5 | ColumnradBridgeGenFlowQosMode | read-create | current | This object controls Quality of Service mode. User may select which field(s) (in case of fields - which one has precedence) will affect prioritization of data … |
| 1.3.6.1.4.1.164.4.1.9.1.1.6 | ColumnradBridgeGenFlowSchedulingMode | read-create | current | This object controls which scheduling mode is used. hqpAndWrr(6) - The highest queue will be emptied first, then the other queues, according to WRR (Weighted R… |
| 1.3.6.1.4.1.164.4.1.9.1.1.7 | ColumnradBridgeGenFlowBasicClassification | read-create | current | This object defines whether Classification based on Port should be taken into account (either as default, or in addition to other classifications). |
| 1.3.6.1.4.1.164.4.1.9.1.1.8 | ColumnradBridgeGenFlowMulticastTrafficClass | read-create | current | The Traffic Class the received Multicast frame is mapped to. |
| 1.3.6.1.4.1.164.4.1.9.1.1.9 | ColumnradBridgeGenFlowBroadcastTrafficClass | read-create | current | The Traffic Class the received Broadcast frame is mapped to. |
| 1.3.6.1.4.1.164.4.1.9.1.1.10 | ColumnradBridgeGenFlowUnkownUnicastTrafficClass | read-create | current | The Traffic Class the received Unkonwn Unicast frame is mapped to. |
| 1.3.6.1.4.1.164.4.1.9.2 | TableradBridgeDot1qVlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.164.4.1.9.2.1 | RowradBridgeDot1qVlanStaticEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.164.4.1.9.2.1.1 | ColumnradBridgeDot1qVlanTaggedPorts | read-create | current | The set of ports which should transmit egress packets for this VLAN as tagged. |
| 1.3.6.1.4.1.164.4.1.9.2.1.2 | ColumnradBridgeDot1qVlanUnmodifiedPorts | read-create | current | The set of ports which should transmit egress packets for this VLAN as unmodified. |
| 1.3.6.1.4.1.164.4.1.9.2.1.3 | ColumnradBridgeDot1qVlanSplitHorizon | read-create | current | When 'enable (3)', packets having this VLAN will not be switched back to other bridge ports which are members of this VLAN. |
| 1.3.6.1.4.1.164.4.1.9.2.1.4 | ColumnradBridgeDot1qVlanRingMembers | read-create | current | This object indicates which Ring (ERP=Ethernet Ring Protection) are members of this VLAN. For each BIT, the value means: '1' = Ring is member of this VLAN. '0'… |
| 1.3.6.1.4.1.164.4.1.9.3 | TableradDot1qPortVlanTable | not-accessible | current | A table containing control and status information for VLAN configuration per port. |
| 1.3.6.1.4.1.164.4.1.9.3.1 | RowradDot1qPortVlanEntry | not-accessible | current | Information controlling VLAN configuration for a port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.164.4.1.9.3.1.1 | ColumnradDot1qPortStacking | read-write | current | This object indicates the port stacking operation: unmodify (2) = Do not add Tag. tag (3) = Add Tag to Untagged Frames. stack (4) = Add Tag to all Frames. |
| 1.3.6.1.4.1.164.4.1.9.3.1.2 | ColumnradDot1qPortCopyOriginVlanPriority | read-write | current | This object indicates whether use the original VLAN Priority of the frame, as the priority of the VLAN added by this port. |
| 1.3.6.1.4.1.164.4.1.9.3.1.3 | ColumnradDot1qPortDefaultVlanPriority | read-write | current | Default VLAN Frame priority of the VLAN added by this port. |
| 1.3.6.1.4.1.164.4.1.9.3.1.4 | ColumnradDot1qPortTagStripping | read-write | current | This object indicates whether remove a tag from the frame on this port, frame with double tag will remain with one tag and frame with one tag will remain untag… |
| 1.3.6.1.4.1.164.4.1.9.3.1.5 | ColumnradDot1qPortEgressTagHandling | read-write | current | This object indicates how is the Egress VLAN Tag processed. It is mainly for use with Double Tagging. |
| 1.3.6.1.4.1.164.4.1.9.3.1.6 | ColumnradDot1qPortIngressTagHandling | read-write | current | This object indicates how is the Ingress VLAN Tag processed. It is mainly for use with Double Tagging. |
| 1.3.6.1.4.1.164.4.1.9.3.1.7 | ColumnradDot1qPortReplaceVlanPriority | read-write | current | This object indicates whether for each received tagged frame on this Bridge Port - VLAN Priority will be replaced by another Priority. no(2) = no repacement ye… |
| 1.3.6.1.4.1.164.4.1.9.3.1.8 | ColumnradDot1qPortVlanEthType | read-write | current | This object indicates the Ethernet Type. For some devices, it is applicable only when radDot1qPortStacking = stack. |
| 1.3.6.1.4.1.164.4.1.9.3.1.9 | ColumnradDot1qPortVlanCnodeLevel1Agent | read-write | current | Specify if a Level 1 cNode agent is enabled or not for the bridge port. |
| 1.3.6.1.4.1.164.4.1.9.4 | TableradBridgeGenCfgTable | not-accessible | current | A table containing Bridge configuration parameters. |
| 1.3.6.1.4.1.164.4.1.9.4.1 | RowradBridgeGenCfgEntry | not-accessible | current | Describes an entry in the radBridgeGenCfgTable. |
| 1.3.6.1.4.1.164.4.1.9.4.1.1 | ColumnradBridgeGenCfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg. For Agents that support only one Configuration, this object wi… |
| 1.3.6.1.4.1.164.4.1.9.4.1.2 | ColumnradBridgeGenCfgIdx2 | not-accessible | current | For Agents having more than one bridge, this index may be used as bridge index |
| 1.3.6.1.4.1.164.4.1.9.4.1.3 | ColumnradBridgeGenCfgBridgeAction | read-write | current | This variable enables the operator to perform one of the specified actions on the tables maintained by the Bridge. After performing the action, Agent will auto… |
| 1.3.6.1.4.1.164.4.1.9.4.1.4 | ColumnradBridgeAgingTimeSec | read-write | current | This variable duplicates scalar object dot1dTpAgingTimeThe of BRIDGE-MIB with configuration index and Bridge index. It defines the timeout period in seconds fo… |
| 1.3.6.1.4.1.164.4.1.9.4.1.5 | ColumnradBridgeMngVlanId | read-write | current | This variable indicates the VLAN ID used for remote management traffic. 0 = Not Applicable. |
| 1.3.6.1.4.1.164.4.1.9.4.1.6 | ColumnradBridgeLoopDetectVlanId | read-write | current | This variable indicates the VLAN ID used for Loop Detection packets. Valid values: 1 - 4095: VLAN ID 0 - Means that the Loop Detection is Disabled. |
| 1.3.6.1.4.1.164.4.1.9.4.1.7 | ColumnradBridgeSplitHorizon | read-write | current | This object configure 'split horizon' switching between bridge Ports. - disable - normal (VLAN aware) bridge behavior. - enable - all packets, regardless their… |
| 1.3.6.1.4.1.164.4.1.9.4.1.8 | ColumnradBridgeEthType | read-write | current | Value of Ethertype field in Ethernet frame. This field indicates which protocol is being transported in an ethernet frame. |
| 1.3.6.1.4.1.164.4.1.9.4.1.9 | ColumnradBridgeTopology | read-write | current | This object indicates the topology type of the Bridge. The default is E-LAN (2) |
| 1.3.6.1.4.1.164.4.1.9.5 | ScalarradBridgeAgingTime | read-write | current | This variable defines whether the Aging Time will be finite or infinite. When selecting the finite (3) value, the exact time will be determined by another vari… |
| 1.3.6.1.4.1.164.4.1.9.6 | ScalarradBridgeMngFlow | read-write | current | This variable defines whether the Management Flow is passed through the bridge (enable) or not (disable). |
| 1.3.6.1.4.1.164.4.1.9.7 | Tableieee8021QBridgeVlanStaticXTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and ar… |
| 1.3.6.1.4.1.164.4.1.9.7.1 | Rowieee8021QBridgeVlanStaticXEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.164.4.1.9.7.1.3 | Columnieee8021QBridgeVlanStaticXSplitHorizon | read-create | current | When 'enable (3)', packets having this VLAN will not be switched back to other bridge ports which are members of this VLAN. |
| 1.3.6.1.4.1.164.4.1.9.7.1.4 | Columnieee8021QBridgeVlanStaticXRingMembers | read-create | current | A sixteen-octet(128 bit) pattern: This object indicates which Ring (ERP=Ethernet Ring Protection) are members of this VLAN. For each BIT, the value means: '1' … |
| 1.3.6.1.4.1.164.4.1.9.7.1.8 | Columnieee8021QBridgeVlanStaticXMaxMacAddr | read-create | current | This object indicates the maximum number of MAC addresses supported by this VLAN. |
| 1.3.6.1.4.1.164.4.1.9.7.1.9 | Columnieee8021QBridgeVlanStaticXTopology | read-create | current | This object indicates the bridge topology per VLAN. The default is E-LAN (2) |
| 1.3.6.1.4.1.164.4.1.9.9 | TableradBridgePortVlanTable | not-accessible | current | A table containing Bridge configuration parameters of the management traffic. |
| 1.3.6.1.4.1.164.4.1.9.9.1 | RowradBridgePortVlanEntry | not-accessible | current | Describes an entry in the radBridgePortVlanTable. |
| 1.3.6.1.4.1.164.4.1.9.9.1.1 | ColumnradBridgePortVlanBridgeIdx | not-accessible | current | This object indicates the Idx of the bridge. |
| 1.3.6.1.4.1.164.4.1.9.9.1.2 | ColumnradBridgePortVlanIdx | not-accessible | current | - For VLAN Aware : This object indicates the VLAN ID number. - For VLAN Unaware: This object is not applicable and the value shall be 0xFFFFFFFF = Not Applicab… |
| 1.3.6.1.4.1.164.4.1.9.9.1.3 | ColumnradBridgePortVlanPrtIdx | not-accessible | current | This object indicates the bridge port Idx. |
| 1.3.6.1.4.1.164.4.1.9.9.1.4 | ColumnradBridgePortVlanRowStatus | read-create | current | This object enables creation and deletion of entries in the radBridgePortVlanTable. Leaf nodes of E-TREE topology will not be registered in this table (see obj… |
| 1.3.6.1.4.1.164.4.1.9.9.1.5 | ColumnradBridgePortVlanIsRoot | read-create | current | This object indicates if the node is Root port or Leaf port. By default: - for E-LAN topology all nodes are root. - for E-TREE topology all nodes that are leav… |
| 1.3.6.1.4.1.164.4.1.10 | NoderadBridgeStatus | |||
| 1.3.6.1.4.1.164.4.1.10.1 | TableradBridgeInvBasePortTable | not-accessible | current | An inversed table to dot1dBasePortTable from RFC1493 with reduced information. This table index is known to the NMS and this way the needed information can be … |
| 1.3.6.1.4.1.164.4.1.10.1.1 | RowradBridgeInvBasePortEntry | not-accessible | current | The bridge port number for each bridge port interface index. |
| 1.3.6.1.4.1.164.4.1.10.1.1.1 | ColumnradBridgeInvBasePortIfIndex | read-only | current | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this Bridge port. |
| 1.3.6.1.4.1.164.4.1.10.1.1.2 | ColumnradBridgeInvBasePort | read-only | current | The Bridge port number. |
| 1.3.6.1.4.1.164.4.1.10.2 | TablebridgeMacSearchTable | not-accessible | current | Table that allow to find specific MAC address in a bridge its allow to search: - specific Mac address in a bridge - Mac addresses on a VLAN - Mac addresses on … |
| 1.3.6.1.4.1.164.4.1.10.2.1 | RowbridgeMacSearchEntry | not-accessible | current | Entries define list of MAC and VLAN per bridge. |
| 1.3.6.1.4.1.164.4.1.10.2.1.1 | ColumnbridgeMacSearchIdx | not-accessible | current | Value is always equal to 1. |
| 1.3.6.1.4.1.164.4.1.10.2.1.2 | ColumnbridgeMacSearchBridgeComponentId | read-write | current | The Mac address to search in a specific bridge. |
| 1.3.6.1.4.1.164.4.1.10.2.1.3 | ColumnbridgeMacSearchAddress | read-write | current | The Mac address to search in a specific bridge. |
| 1.3.6.1.4.1.164.4.1.10.2.1.4 | ColumnbridgeMacSearchVlan | read-write | current | The object is used to search all the MAC addresses in a specific VLAN. |
| 1.3.6.1.4.1.164.4.1.10.2.1.5 | ColumnbridgeMacSearchPort | read-write | current | The object is used to search all the MAC addresses in a specific port. |
| 1.3.6.1.4.1.164.4.1.10.2.1.6 | ColumnbridgeMacSearchCmdStatus | read-write | current | The status of the search process: notApplicable - used as default value startSearch - initiate search process macSearching - search is in process macFound - th… |
| 1.3.6.1.4.1.164.4.1.10.3 | TablebridgeMacResultTable | not-accessible | current | The table holds the result of the searching MAC addresses initiated in table bridgeMacTable. |
| 1.3.6.1.4.1.164.4.1.10.3.1 | RowbridgeMacResultEntry | not-accessible | current | Describes an entry in the bridgeMacResultTable. |
| 1.3.6.1.4.1.164.4.1.10.3.1.1 | ColumnbridgeMacResultBridgeIdx | not-accessible | current | The bridge index. |
| 1.3.6.1.4.1.164.4.1.10.3.1.2 | ColumnbridgeMacResultVlan | not-accessible | current | The Mac address on a VLAN that was searched. |
| 1.3.6.1.4.1.164.4.1.10.3.1.3 | ColumnbridgeMacResultMacAddress | not-accessible | current | The Mac address that was searched. |
| 1.3.6.1.4.1.164.4.1.10.3.1.4 | ColumnbridgeMacResultPort | read-only | current | The Mac address on a port that was searched. |
| 1.3.6.1.4.1.164.4.1.10.3.1.5 | ColumnbridgeMacResultCmdStatus | read-only | current | The type of the Mac address, see ieee8021QBridgeTpFdbStatus for details. |
| 1.3.6.1.4.1.164.4.1.11 | NoderadBridgeStp | |||
| 1.3.6.1.4.1.164.4.1.11.1 | TableradBridgeStpCnfgTable | not-accessible | current | STP Configuration table. STP=Spanning Tree Protocol. It includes STP configurable parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge… |
| 1.3.6.1.4.1.164.4.1.11.1.1 | RowradBridgeStpCnfgEntry | not-accessible | current | An entry in the radBridgeStpCnfgTable. |
| 1.3.6.1.4.1.164.4.1.11.1.1.1 | ColumnradBridgeStpCnfgIdx1 | not-accessible | current | This object indicates the Index of the Agent Configuration the following objects refer to. For Agents that support more than one configuration: 255=Temporary C… |
| 1.3.6.1.4.1.164.4.1.11.1.1.2 | ColumnradBridgeStpCnfgIdx2 | not-accessible | current | For Agents having the table objects per Card/Bridge/Interface this will be the index of the Card/Bridge/Interface used. |
| 1.3.6.1.4.1.164.4.1.11.1.1.3 | ColumnradBridgeStpCnfgForwardDelay | read-write | current | The value that the bridge of radBridgeStpCnfgIdx2 uses for Forward Delay when this bridge is acting as the root. Note that the range for this parameter is rela… |
| 1.3.6.1.4.1.164.4.1.11.1.1.4 | ColumnradBridgeStpCnfgMaxAge | read-write | current | The value that the bridge of radBridgeStpCnfgIdx2 uses for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to … |
| 1.3.6.1.4.1.164.4.1.11.1.1.5 | ColumnradBridgeStpCnfgHelloTime | read-write | current | The value that the bridge of radBridgeStpCnfgIdx2 uses for Hello Time when this bridge is acting as the root. The granularity of this timer is specified by 802… |
| 1.3.6.1.4.1.164.4.1.11.1.1.6 | ColumnradBridgeStpCnfgPriority | read-write | current | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID, per radBridgeStpCnfgIdx2 instance. |
| 1.3.6.1.4.1.164.4.1.11.1.1.7 | ColumnradBridgeStpCnfgStpVersion | read-write | current | This object determines the STP version used: stp - usual Spanning Tree Protocol. rstp - Rapid Spanning Tree Protocol. |
| 1.3.6.1.4.1.164.4.1.11.2 | TableradBridgeStpStatTable | not-accessible | current | STP Status table. STP=Spanning Tree Protocol. It includes STP status parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge/interface. F… |
| 1.3.6.1.4.1.164.4.1.11.2.1 | RowradBridgeStpStatEntry | not-accessible | current | An entry in the radBridgeStpStatTable. |
| 1.3.6.1.4.1.164.4.1.11.2.1.1 | ColumnradBridgeStpStatIdx | not-accessible | current | For Agents having the table objects per Card/Bridge/Interface this will be the index of the Card/Bridge/Interface used. |
| 1.3.6.1.4.1.164.4.1.11.2.1.2 | ColumnradBridgeStpStatForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.164.4.1.11.2.1.3 | ColumnradBridgeStpStatMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.164.4.1.11.2.1.4 | ColumnradBridgeStpStatHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.164.4.1.11.2.1.5 | ColumnradBridgeStpStatDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.164.4.1.11.2.1.6 | ColumnradBridgeStpStatRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.164.4.1.11.3 | Tableieee8021MstpXTable | not-accessible | current | ieee8021MstpXTable augments ieee8021MstpTable. It is used for mapping VLANs to MST instances.. |
| 1.3.6.1.4.1.164.4.1.11.3.1 | Rowieee8021MstpXEntry | not-accessible | current | An entry in the ieee8021MstpXTable. |
| 1.3.6.1.4.1.164.4.1.11.3.1.1 | Columnieee8021MstpXVids0 | read-create | current | This object contains the first 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. This is a read-writable object corresponding … |
| 1.3.6.1.4.1.164.4.1.11.3.1.2 | Columnieee8021MstpXVids1 | read-create | current | This object contains the first 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. This is a read-writable object corresponding … |
| 1.3.6.1.4.1.164.4.1.11.3.1.3 | Columnieee8021MstpXVids2 | read-create | current | This object contains the third 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. This is a read-writable object corresponding … |
| 1.3.6.1.4.1.164.4.1.11.3.1.4 | Columnieee8021MstpXVids3 | read-create | current | This object contains the fourth 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. This is a read-writable object corresponding… |
| 1.3.6.1.4.1.164.4.1.12 | ScalarradBridgeForwardingMode | read-write | current | This object determines the Bridge Forwarding Mode: transparent - Forward all frames received (not dependent on VLAN). filter - Filter frames received according… |
| 1.3.6.1.4.1.164.4.1.13 | NoderadBridgePort | |||
| 1.3.6.1.4.1.164.4.1.13.1 | TableradBridgePortCnfgTable | not-accessible | current | The Bridge Port Configuration Table. |
| 1.3.6.1.4.1.164.4.1.13.1.1 | RowradBridgePortCnfgEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.4.1.13.1.1.1 | ColumnradBridgePortCnfgIdx | not-accessible | current | The first index of the table. It can serve for Configuration index, Bridge index or other. |
| 1.3.6.1.4.1.164.4.1.13.1.1.2 | ColumnradBridgePortCnfgPrtIdx | not-accessible | current | This object indicates the Bridge Port index. |
| 1.3.6.1.4.1.164.4.1.13.1.1.3 | ColumnradBridgePortCnfgMaxMacAddr | read-write | current | This object indicates the maximum number of total MAC Addresses (static and learned) supported by this Bridge Port. |
| 1.3.6.1.4.1.164.4.1.13.1.1.4 | ColumnradBridgePortCnfgMngFlow | read-write | current | This object indicates whether this Bridge Port is dedicated for management flow. |
| 1.3.6.1.4.1.164.4.1.13.1.1.5 | ColumnradBridgePortCnfgMcastMode | read-write | current | This object indicates this Bridge Port's Multicast Mode: flooding (1) - flood multicast MAC addresses forwarding (2) - forward multicast MAC addresses to the s… |
| 1.3.6.1.4.1.164.4.1.13.1.1.6 | ColumnradBridgePortCnfgDefaultVpi | read-write | current | This object indicates the VPI of this Bridge Port's Default VCL. An incoming frame with priority that is not assigned to any VCL will be transferred to the Def… |
| 1.3.6.1.4.1.164.4.1.13.1.1.7 | ColumnradBridgePortCnfgDefaultVci | read-write | current | This object indicates the VCI of this Bridge Port's Default VCL. An incoming frame with priority that is not assigned to any VCL will be transferred to the Def… |
| 1.3.6.1.4.1.164.4.1.13.1.1.8 | ColumnradBridgePortCnfgStatVlanId | read-write | current | This object indicates the selected VlanId of the bridge port on which statistics are being collected. 0=no Statistics collected for VLAN on this bridge port. |
| 1.3.6.1.4.1.164.4.1.13.1.1.9 | ColumnradBridgePortCnfgIngressMtu | read-write | current | The size of the largest packet which can be received on the interface, specified in octets. |
| 1.3.6.1.4.1.164.4.1.13.1.1.10 | ColumnradBridgePortCnfgEgressMtu | read-write | current | The size of the largest packet which can be sent on the interface, specified in octets. |
| 1.3.6.1.4.1.164.4.1.13.1.1.11 | ColumnradBridgePortCnfgDot1x | read-write | current | This feature is currently supported via the variable ethIfTable.ethDot1xEnable. Determnines if the Port-Based Network Access Protocol (IEEE-802.1x)is enabled f… |
| 1.3.6.1.4.1.164.4.1.13.1.1.12 | ColumnradBridgePortCnfgMappingProfile | read-write | current | This attribute defines the Queue Mapping Profile ID(cosProfileTable) assigned to this Bridge Port. |
| 1.3.6.1.4.1.164.4.1.14 | Tableieee8021BridgeBaseXTable | not-accessible | current | A RAD-defined list of objects containing information for each bridge. This table augments ieee8021BridgeBaseTable. |
| 1.3.6.1.4.1.164.4.1.14.1 | Rowieee8021BridgeBaseXEntry | not-accessible | current | This is indexed by ieee8021BridgeBaseComponentId. |
| 1.3.6.1.4.1.164.4.1.14.1.1 | Columnieee8021BridgeBaseXForwardingMode | read-create | current | This object is similar with radBridgeForwardingMode. It determines the Bridge Forwarding Mode: transparent - Forward all frames received (not dependent on VLAN… |
| 1.3.6.1.4.1.164.4.1.14.1.2 | Columnieee8021BridgeBaseXName | read-create | current | This object indicates the Bridge's Name. |
| 1.3.6.1.4.1.164.4.1.15 | Tableinvieee8021QBridgeVlanCurrentTable | not-accessible | current | A Reverese table of ieee8021QBridgeVlanCurrentTable. |
| 1.3.6.1.4.1.164.4.1.15.1 | Rowinvieee8021QBridgeVlanCurrentEntry | not-accessible | current | Information for an FDB ID configured into the device. |
| 1.3.6.1.4.1.164.4.1.15.1.1 | Columninvieee8021QBridgeVlanCurrentComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.6.1.4.1.164.4.1.15.1.2 | Columninvieee8021QBridgeVlanFdbId | read-only | current | The Filtering Database used by this VLAN. This is one of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable. This value is allocated automatically … |
| 1.3.6.1.4.1.164.4.1.15.1.3 | Columninvieee8021QBridgeVlanTimeMark | not-accessible | current | A TimeFilter for this entry. See the TimeFilter textual convention to see how this works. |
| 1.3.6.1.4.1.164.4.1.15.1.4 | Columninvieee8021QBridgeVlanIndex | not-accessible | current | The VLAN-ID or other identifier referring to this VLAN. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeTopology | INTEGER { notApplicable (1), eLAN (3), eTree (4) } | current | This TEXTUAL CONVENTION defines the topology of the bridge. |
| TagHandlingType | INTEGER { none (2), stacking (3), stripping (4) } | current | This TEXTUAL CONVENTION defines VLAN Tag process type. It is mainly for use with Double Tagging. |