RAD-LanRger-MIB
199 objects
Lanragner MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.4.2 | Identitylanranger | Lanragner MIB. | ||
| 1.3.6.1.4.1.164.4.2.0 | IdentitylanrangerEvents | current | The events for the LANRANger. | |
| 1.3.6.1.4.1.164.4.2.0.1 | NotificationlanrangerLogLinkUp | current | The lanrangerLogLinkUp trap indicates that the indicated logical link is connected. | |
| 1.3.6.1.4.1.164.4.2.0.2 | NotificationlanrangerLogLinkDown | current | The lanrangerLogLinkDown trap indicates that the indicated logical link is disconnected. | |
| 1.3.6.1.4.1.164.4.2.0.3 | NotificationlanrangerLanTableOverflow | current | The station table has the maximum number of addresses for the LANRANger. | |
| 1.3.6.1.4.1.164.4.2.0.4 | NotificationlanrangerStatusChanged | current | The trap indicates changes in the device status . | |
| 1.3.6.1.4.1.164.4.2.1 | NodelanrangerConfig | |||
| 1.3.6.1.4.1.164.4.2.1.1 | ScalarlanrangerLoc | read-only | current | lanrangerLoc is set to main if the LANRANger is located on the main LAN and it is set to remote if it is located on a LAN at a remote site. |
| 1.3.6.1.4.1.164.4.2.1.2 | ScalarlanrangerBurnAddress | read-only | current | This is the burned-in MacAddress on the LANRANger. |
| 1.3.6.1.4.1.164.4.2.1.3 | ScalarlanrangerLocAddress | read-write | current | This is a locally administered address. If a zero value appears, the network administrator did not set a locally administered address. |
| 1.3.6.1.4.1.164.4.2.1.4 | ScalarlanrangerActiveAddress | read-write | current | The MAC address that is in use on the LANRANger. The address selected will appear in ifPhysAddress. |
| 1.3.6.1.4.1.164.4.2.1.5 | ScalarlanrangerLearningStationTopology | read-write | current | |
| 1.3.6.1.4.1.164.4.2.1.6 | NodelanrangerIpRouterInfo | |||
| 1.3.6.1.4.1.164.4.2.1.6.1 | ScalarlanrangerIpDefaultLink | read-write | current | The default selected link, having the numbering system of ifIndex. The valid values range is: 1..ifIndex. The value must remain constant at least from one re-i… |
| 1.3.6.1.4.1.164.4.2.1.6.2 | ScalarlanrangerIpFastReTxLevel | read-write | current | The maximum buffer depth (queue length) for which lanranger will accept retransmission (for each station; the level is the same for all the stations). The vali… |
| 1.3.6.1.4.1.164.4.2.1.6.3 | ScalarlanrangerIpAgingTimeout | read-write | current | Ip aging time for a station - in min. |
| 1.3.6.1.4.1.164.4.2.1.6.4 | NodelanrangerIpBootP | |||
| 1.3.6.1.4.1.164.4.2.1.6.4.1 | ScalarlanrangerBootPAction | read-write | current | Activating (disable/enable) the BootP operation. |
| 1.3.6.1.4.1.164.4.2.1.6.4.2 | ScalarlanrangerBootPAvailableEntries | read-only | current | The number of available entries in the BootP table. |
| 1.3.6.1.4.1.164.4.2.1.6.4.3 | ScalarlanrangerBootPCurrentEntries | read-only | current | The current number of BootP entries in the BootP table. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4 | TablelanrangerBootPTable | not-accessible | current | A list of BootP entries. The number of entries is up to BootP current entries, according to the LANRANger model. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1 | RowlanrangerBootPEntry | not-accessible | current | BootP parameters per entry of the BootP table. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1.1 | ColumnlanrangerBootPIpAddress | read-only | current | BootP Ip Address. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1.2 | ColumnlanrangerBootPIfIndex | read-only | current | The number is the same as the ifIndex of the link. |
| 1.3.6.1.4.1.164.4.2.1.6.4.4.1.3 | ColumnlanrangerBootPOperation | read-write | current | This object indicates the status of this entry. active(1) - this entry is currently in use and will remain so even after the next reset of the LANRANger. delet… |
| 1.3.6.1.4.1.164.4.2.1.7 | NodelanrangerSpoofingInfo | |||
| 1.3.6.1.4.1.164.4.2.1.7.1 | ScalarlanrangerSpoofingAction | read-write | current | |
| 1.3.6.1.4.1.164.4.2.1.7.2 | ScalarlanrangerSpoofingAgingStation | read-write | current | |
| 1.3.6.1.4.1.164.4.2.2 | NodelanrangerInterface | |||
| 1.3.6.1.4.1.164.4.2.2.1 | TablelanrangerLinkTable | not-accessible | current | A list of link entries. The number of entries is up to 8, according to the LANRANger model. |
| 1.3.6.1.4.1.164.4.2.2.1.1 | RowlanrangerLinkEntry | not-accessible | current | LANRANger-specific parameter values for a link. |
| 1.3.6.1.4.1.164.4.2.2.1.1.1 | ColumnlanrangerLinkIndex | read-only | current | A unique value for each link, equal to the value of ifIndex. The value for each link must remain constant at least from one re-initialization of the network ma… |
| 1.3.6.1.4.1.164.4.2.2.1.1.2 | ColumnlanrangerLinkType | read-write | current | The link type . |
| 1.3.6.1.4.1.164.4.2.2.1.1.3 | ColumnlanrangerLinkState | read-write | current | The link is disabled, enabled or backup. |
| 1.3.6.1.4.1.164.4.2.2.1.1.4 | ColumnlanrangerLinkDTRMode | read-only | current | The link DTR mode. |
| 1.3.6.1.4.1.164.4.2.2.1.1.5 | ColumnlanrangerLinkStatus | read-only | current | The link physical status . |
| 1.3.6.1.4.1.164.4.2.2.1.1.6 | ColumnlanrangerLinkConnectionStatus | read-only | current | The link connection status. |
| 1.3.6.1.4.1.164.4.2.2.1.1.7 | ColumnlanrangerLinkNumOfLogLinks | read-only | current | The number of logical links on this physical link. 0 = noLogicalLink |
| 1.3.6.1.4.1.164.4.2.2.1.1.8 | ColumnlanrangerLinkReset | read-write | current | Setting this attribute to ON will reset the link . Upon completion the value will be set to OFF |
| 1.3.6.1.4.1.164.4.2.2.1.1.9 | ColumnlanrangerLinkRxMaskedFrames | read-only | current | The number of masked frames received on this physical link. |
| 1.3.6.1.4.1.164.4.2.2.1.1.10 | ColumnlanrangerLinkLayer2Type | read-write | current | The link layer 2 type indicates whether the link is Bridge or Router and specifies the Router's type. |
| 1.3.6.1.4.1.164.4.2.2.1.1.11 | ColumnlanrangerLinkLayer3Type | read-write | current | The link layer 3 type indicates the protocol type. |
| 1.3.6.1.4.1.164.4.2.2.1.1.12 | ColumnlanrangerBackupLink | read-write | current | The backup link interface index located in the two LSB bytes. If the link is FR type, the two MSB will contain a DLCi number. For other link types the two MSB … |
| 1.3.6.1.4.1.164.4.2.2.1.1.13 | ColumnwrWanThrottle | read-write | current | Throttle controls the baud rate of the WAN. For example if we have a WAN rate of 2M but we want only 1/2 M as the baud rate we set the Wan Throttle to 512k. Th… |
| 1.3.6.1.4.1.164.4.2.2.1.1.14 | ColumnwrIpTransparentMode | read-write | current | This parameter shows whether the IP Transparent mode is enabled. When this mode is enabled, all frames (including broadcast and multicast frames) are forwarded… |
| 1.3.6.1.4.1.164.4.2.2.1.1.15 | ColumnwrIpTransparentGateway | read-write | current | The gateway used for transparent IP. |
| 1.3.6.1.4.1.164.4.2.2.1.1.16 | ColumnlanrangerLinkProtocolType | read-write | current | This parameter indicates the routing protocol running on this Interface. |
| 1.3.6.1.4.1.164.4.2.2.2 | NodelanrangerLinkConnection | |||
| 1.3.6.1.4.1.164.4.2.2.2.1 | ScalarlanrangerConnMaxEntries | read-only | current | The maximum number of entries in the Connection table. |
| 1.3.6.1.4.1.164.4.2.2.2.2 | ScalarlanrangerConnCurrentEntries | read-only | current | The current number of entries in the Connection table. |
| 1.3.6.1.4.1.164.4.2.2.2.3 | TablelanrangerLinkConnTable | not-accessible | current | A list of Connection entries. The number of entries is up to Max entries, according to the LANRANger model. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1 | RowlanrangerLinkConnEntry | not-accessible | current | Information about LANRANger Connection. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.1 | ColumnlanrangerLinkConnPhysLink | read-only | current | The lanrangerLinkIndex for the physical link with which this logical link is associated. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.2 | ColumnlanrangerLinkConnAid | read-only | current | A unique value for each logical link. The maximum number of logical links is 256, according to the LANRANger model. The value for each logical link must remain… |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.3 | ColumnlanrangerLinkConnMacAddr | read-only | current | The MAC address of the device that the logical link is connected to on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.4 | ColumnlanrangerLinkConnStatus | read-only | current | The link connection status. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.5 | ColumnlanrangerLinkConnDeviceType | read-only | current | The type of device that the logical link is connected to on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.6 | ColumnlanrangerLinkConnDeviceName | read-only | current | The logical name of the device that the logical link is connected to on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.7 | ColumnlanrangerLinkConnDeviceSWVer | read-only | current | SW Version of the device that the logical link is connected to, on the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.8 | ColumnlanrangerLinkConnNumLanStation | read-only | current | The number of stations of the remote LAN. |
| 1.3.6.1.4.1.164.4.2.2.2.3.1.9 | ColumnlanrangerLinkSyncStatus | read-only | current | The Sync link status. |
| 1.3.6.1.4.1.164.4.2.2.3 | TablelanrangerModemTable | not-accessible | current | A list of Modem entries. The number of entries is up to ifIndex. |
| 1.3.6.1.4.1.164.4.2.2.3.1 | RowlanrangerModemEntry | not-accessible | current | LANRANger-specific parameter values for a Modem. |
| 1.3.6.1.4.1.164.4.2.2.3.1.1 | ColumnlanrangerModemLinkIndex | read-only | current | A list of asynchronous ports of the link, according to ifIndex. Synchronous ports will not appear in this table. Their port number will be skipped. |
| 1.3.6.1.4.1.164.4.2.2.3.1.2 | ColumnlanrangerModemName | read-write | current | The Modem Name identifier for MBE/TRE. Up to 50 characters. |
| 1.3.6.1.4.1.164.4.2.2.3.1.3 | ColumnlanrangerModemSettingString | read-write | current | Modem setting String. Up to 80 characters. |
| 1.3.6.1.4.1.164.4.2.2.3.1.4 | ColumnlanrangerModemAutobaudingSpeed | read-write | current | Enable or disable autobauding. When the Autobauding feature is enabled, the MBE/TRE automatically ranges over various Baud rates, starting with 115.2 Kbps, unt… |
| 1.3.6.1.4.1.164.4.2.2.3.1.5 | ColumnlanrangerModemResetBeforeSetup | read-write | current | Reset the modem before setup is performed. It is recommended to reset the modem before modem setup session. |
| 1.3.6.1.4.1.164.4.2.2.3.1.6 | ColumnlanrangerModemAnalyzeAnswers | read-write | current | Enable this option if a modem using non-standard answering is used. When this mode is enabled, the MBE/TRE awaits modem answers 'CONNECT', 'CARRIER', or 'OK', … |
| 1.3.6.1.4.1.164.4.2.2.3.1.7 | ColumnlanrangerModemSpeaker | read-write | current | Toggle the Modem Speaker On or Off . |
| 1.3.6.1.4.1.164.4.2.2.3.1.8 | ColumnlanrangerModemDialingNumber | read-write | current | Various command switches listed in Modem Dialing Number Menu allows selection of tone, pulse-dialing, or various wait states. P - Set Pulse dialing number . T … |
| 1.3.6.1.4.1.164.4.2.2.3.1.9 | ColumnwrLocalDialBackNumber | read-write | current | This is the number that the Remote Modem will use to call the local Modem at Dial Back. Various command switches listed in Modem Dialing Number Menu allows sel… |
| 1.3.6.1.4.1.164.4.2.2.3.1.10 | ColumnwrRingsBeforeAnswer | read-write | current | Determines which ring the modem will wait to answer the phone on. |
| 1.3.6.1.4.1.164.4.2.2.3.1.11 | ColumnlanrangerModemDialRetries | read-write | current | The number of dialing retries requested. Default = 0 |
| 1.3.6.1.4.1.164.4.2.2.4 | TablelanrangerLinkPktSwTable | not-accessible | current | A list of X.25/FR modules entries. The number of entries is up to ifIndex. |
| 1.3.6.1.4.1.164.4.2.2.4.1 | RowlanrangerLinkPktSwEntry | not-accessible | current | LANRANger-specific parameter values for X.25/FR modules. |
| 1.3.6.1.4.1.164.4.2.2.4.1.1 | ColumnlanrangerLinkPktSwIndex | read-only | current | A unique value for each X.25/FR of the link, according to numbering system of ifIndex. The maximum number of links is ifIndex. The value for each link must rem… |
| 1.3.6.1.4.1.164.4.2.2.4.1.2 | ColumnlanrangerLinkPktSwType | read-only | current | Packet Switch Type. |
| 1.3.6.1.4.1.164.4.2.2.4.1.3 | ColumnlanrangerLinkPktSwControlSignal | read-write | current | Packet Switch control command. |
| 1.3.6.1.4.1.164.4.2.2.4.1.4 | ColumnlanrangerLinkPktSwSpeed | read-write | current | The Pkt Switch port's speed in bits per second. Range: 1200bps .. 1544000bps |
| 1.3.6.1.4.1.164.4.2.2.4.1.5 | ColumnlanrangerLinkPktSwConfigParity | read-write | current | The Pkt Switch Config port's character parity bit. Applicable only for x25FRConfigChannel. For x25FRChannel the value notApplicable applies. |
| 1.3.6.1.4.1.164.4.2.2.4.1.6 | ColumnlanrangerLinkPktSwConfigStopBit | read-write | current | The Pkt Switch Config port's number of stop bits. Applicable only for x25FRConfigChannel. For x25FRChannel the value notApplicable applies. |
| 1.3.6.1.4.1.164.4.2.2.4.1.7 | ColumnlanrangerLinkPktSwResetModule | read-write | current | Reset command to Pkt Switch module. Applicable only for x25FRChannel. The command will have no effect on x25FRConfigChannel. |
| 1.3.6.1.4.1.164.4.2.2.5 | TablewrPPPTable | not-accessible | current | This table contains only parameters that do not exist in the PPP standard MIBS. The table contains a list of PPP entries. The number of entries is up to ifInde… |
| 1.3.6.1.4.1.164.4.2.2.5.1 | RowwrPPPEntry | not-accessible | current | LANRANger-specific parameter values for a PPP. |
| 1.3.6.1.4.1.164.4.2.2.5.1.1 | ColumnwrPPPCompressionHeaderField | read-write | current | This configuration option provides a method to negotiate the compression of the Data Link Layer Address and Control fields. This configuration option is sent t… |
| 1.3.6.1.4.1.164.4.2.2.5.1.2 | ColumnwrPPPCompressionProtocolFields | read-write | current | This configuration option provides a method to negotiate the compression of the PPP Protocol field. This configuration option is sent to inform the peer that t… |
| 1.3.6.1.4.1.164.4.2.2.5.1.3 | ColumnwrPPPSTACCompressionType | read-write | current | The PPP compression control protocol provides a method to negotiate and utilize compression protocol over PPP encapsulated links. These are Different types of … |
| 1.3.6.1.4.1.164.4.2.2.5.1.4 | ColumnwrPPPAuthProtocol | read-write | current | The type of authentication protocol being used. The left parameter is the maximum authentication, the right parameter is minimum authentication. |
| 1.3.6.1.4.1.164.4.2.2.5.1.5 | ColumnwrPPPSecurityType | read-write | current | Type of unit. |
| 1.3.6.1.4.1.164.4.2.2.5.1.6 | ColumnwrPPPUserName | read-write | current | PPP User name. |
| 1.3.6.1.4.1.164.4.2.2.5.1.7 | ColumnwrPPPPassword | read-write | current | PPP Password . |
| 1.3.6.1.4.1.164.4.2.2.5.1.8 | ColumnwrPPPLinkActiveTime | read-write | current | PPP link active time in seconds Values range: 2 - 900. Default value = 2 |
| 1.3.6.1.4.1.164.4.2.2.5.1.9 | ColumnwrPPPIPCPSubnetMaskNegotiation | read-write | current | This object indicates the ifIndex of the link (LAN port) through which IPCP Subnet Mask negotiation is allowed. The distinguished value of zero may be used if … |
| 1.3.6.1.4.1.164.4.2.2.5.1.10 | ColumnwrPPPLinkControlProtocolStatus | read-only | current | PPP Link Control Protocol(LCP) Status |
| 1.3.6.1.4.1.164.4.2.2.5.1.11 | ColumnwrPPPAuthenticationStatus | read-only | current | PPP Authentication status. |
| 1.3.6.1.4.1.164.4.2.2.5.1.12 | ColumnwrPPPIpcpStatus | read-only | current | IPCP (IP Control Protocol) status. |
| 1.3.6.1.4.1.164.4.2.2.5.1.13 | ColumnwrPPPAssignedIPAddress | read-only | current | IP Address assigned by PPP. |
| 1.3.6.1.4.1.164.4.2.2.5.1.14 | ColumnwrPPPActualAuthProtocol | read-only | current | The Actual type of Authentication Protocol that is used. |
| 1.3.6.1.4.1.164.4.2.2.5.1.15 | ColumnwrPPPIpTranslationMode | read-write | current | This object enables the IP Translation Mode. |
| 1.3.6.1.4.1.164.4.2.2.5.1.16 | ColumnwrPPPTranslatedIpAddr | read-write | current | This object represents the Translated IP Address. It is relevant only when IP Translation Mode is 'enable'. |
| 1.3.6.1.4.1.164.4.2.2.6 | TablewrMLPPPTable | not-accessible | current | This table contains a list of ML-PPP entries. |
| 1.3.6.1.4.1.164.4.2.2.6.1 | RowwrMLPPPEntry | not-accessible | current | Specific parameter values for a ML-PPP. |
| 1.3.6.1.4.1.164.4.2.2.6.1.1 | ColumnwrMLPPPEpDiscriminatorEnable | read-write | current | Indicates whether the Endpoint Discriminator Option is enabled. The Endpoint Discriminator Option represents identification of the system transmitting the pack… |
| 1.3.6.1.4.1.164.4.2.2.6.1.2 | ColumnwrMLPPPReorderingEnable | read-write | current | Indicates whether packets reordering option is enabled. yes - packets received from MLPPP not in order are reordered, according to sequence number, before bein… |
| 1.3.6.1.4.1.164.4.2.2.6.1.3 | ColumnwrMLPPPTxQueueSize | read-write | current | Indicates the number of frames in the Tx Queue. |
| 1.3.6.1.4.1.164.4.2.2.7 | NodepPPoE | |||
| 1.3.6.1.4.1.164.4.2.2.7.1 | TablepPPoETable | not-accessible | current | The PPPoE (Point-to-Point Protocol over Ethernet) Table. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1 | RowpPPoEEntry | not-accessible | current | An entry in the PPPoE Table. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.1 | ColumnpPPoECnfgIdx | not-accessible | current | Usually the ifIndex of the PPP link the PPPoE session is on. Some applications may use this index otherwise. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.2 | ColumnpPPoEID | not-accessible | current | PPPoE session unique identifier. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.3 | ColumnpPPoERowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.4 | ColumnpPPoEACName | read-create | current | The access concentrator the PPPoE session should be established with. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.5 | ColumnpPPoEServiceName | read-create | current | The service requested on the PPPoE session. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.6 | ColumnpPPoEEntityPointer | read-create | current | This parameter represents the entity (interface/port etc) that is connected to this PPPoE. The value of this parameter is a pointer to an existing row of a tab… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.7 | ColumnpPPoESessionStatus | read-only | current | notApplicable - none of the other states applies down - session not established up - session established lowerLayerDown - session not established due to lower … |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.8 | ColumnpPPoESessionID | read-only | current | This object represents PPPoE Session ID. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.9 | ColumnpPPoERemoteMacAddr | read-only | current | This object represents the MAC Address of the Access Concentrator, with which the PPPoE session is established. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.10 | ColumnpPPoENoOfUsages | read-only | current | This object represents the number of times this PPPoE is used. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.11 | ColumnpPPoESchedRestartMode | read-create | current | This object represents Scheduled Restart Mode. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.12 | ColumnpPPoESchedRestartTime | read-create | current | This object represents Scheduled Restart Time. It is relevant only when Scheduled Restart Mode is 'enable'. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.13 | ColumnpPPoESchedRestartRandomRange | read-create | current | This object represents Scheduled Restart Random Range (in seconds). It is relevant only when Scheduled Restart Mode is 'enable'. A scheduled restart Random VAL… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.14 | ColumnpPPoESchedRestartActualTime | read-only | current | This object represents Scheduled Restart Actual Time. It is relevant only when Scheduled Restart Mode is 'enable'. For calculation of this time - see pPPoESche… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.15 | ColumnpPPoEInitDelayRandomRange | read-create | current | This object represents the Initialization Delay Random Range (in seconds). An initialization DELAY (number of seconds) is selected within this Random Range. Th… |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.16 | ColumnpPPoEInitActualDelay | read-only | current | This object represents Initialization Delay (in seconds), as selected within Initialization Delay Random Range (pPPoEInitDelayRandomRange). |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.17 | ColumnpPPoEVlanTagging | read-create | current | This object represents the VLAN Tagging. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.18 | ColumnpPPoEVlanId | read-create | current | This object represents the VLAN ID. |
| 1.3.6.1.4.1.164.4.2.2.7.1.1.19 | ColumnpPPoEVlanPriority | read-create | current | This object represents the VLAN Priority. |
| 1.3.6.1.4.1.164.4.2.2.7.2 | TablepppoeClientReceivedTagsTable | not-accessible | current | This table contains the PPPoE tags received in the offer (PADO packet) of the access concentrator with which a PPPoE session has been established. |
| 1.3.6.1.4.1.164.4.2.2.7.2.1 | RowpppoeClientReceivedTagsEntry | not-accessible | current | Each entry contains the details of one PPPoE tag. |
| 1.3.6.1.4.1.164.4.2.2.7.2.1.1 | ColumnpppoeClientReceivedTagNumber | not-accessible | current | A running index. 1 for the first tag received in the PADO packet, 2 for the second, and so on. |
| 1.3.6.1.4.1.164.4.2.2.7.2.1.2 | ColumnpppoeClientReceivedTagType | read-only | current | The TAG_TYPE of the PPPoE tag in the received packet. |
| 1.3.6.1.4.1.164.4.2.2.7.2.1.3 | ColumnpppoeClientReceivedTagValue | read-only | current | The TAG_VALUE of the PPPoE tag in the received packet. |
| 1.3.6.1.4.1.164.4.2.2.8 | TablepppSecurityTable | not-accessible | current | This table contains user credentials used by various methods (CHAP, PAP...) during the PPP authentication phase. |
| 1.3.6.1.4.1.164.4.2.2.8.1 | RowpppSecurityEntry | not-accessible | current | Each entry contains one authentication parameter or more, depending of the entry's type. |
| 1.3.6.1.4.1.164.4.2.2.8.1.1 | ColumnpppSecurityType | not-accessible | current | The type of the credentials in this entry. chapHostname - hostname to send to the authenticator in CHAP authentication, instead of the (by default) device sysN… |
| 1.3.6.1.4.1.164.4.2.2.8.1.2 | ColumnpppSecurityPriority | not-accessible | current | If there are multiple entries of the same type, one with lower priority has precedence over one with higher priority. |
| 1.3.6.1.4.1.164.4.2.2.8.1.3 | ColumnpppSecurityRowStatus | read-create | current | User credentials are added and removed by users using this object. |
| 1.3.6.1.4.1.164.4.2.2.8.1.4 | ColumnpppSecurityDirection | read-create | current | The direction in which the credentials in this entry are used. localToRemote - the device is authenticated by a peer RemoteToLocal - The device authenticates a… |
| 1.3.6.1.4.1.164.4.2.2.8.1.5 | ColumnpppSecurityIdentity | read-create | current | A string representing name, such as hostname or username, to be used in the PPP authentication phase. |
| 1.3.6.1.4.1.164.4.2.2.8.1.6 | ColumnpppSecuritySecret | read-create | current | A password to be used in the PPP authentication phase. The password is always saved in an encrypted form; if a user sets a clear password, the device must encr… |
| 1.3.6.1.4.1.164.4.2.2.8.1.7 | ColumnpppSecuritySecretType | read-create | current | This object is used by users to denote whether the string set in pppSecuritySecret is a clear or encrypted password. The device sets it to 'off' after saving t… |
| 1.3.6.1.4.1.164.4.2.2.9 | TablepppLinkStatusXTable | not-accessible | current | This table contains PPP monitoring objects. It augments the standard pppLinkStatusTable (rfc 1471). |
| 1.3.6.1.4.1.164.4.2.2.9.1 | RowpppLinkStatusXEntry | not-accessible | current | Each entry contains monitoring objects of one PPP link. |
| 1.3.6.1.4.1.164.4.2.2.9.1.1 | ColumnpppLinkStatusXLcpState | read-only | current | LCP phase state. |
| 1.3.6.1.4.1.164.4.2.2.9.1.2 | ColumnpppLinkStatusXUsAuthProtocol | read-only | current | The method used by the peer to authenticate the device. |
| 1.3.6.1.4.1.164.4.2.2.9.1.3 | ColumnpppLinkStatusXUsAuthState | read-only | current | The state of the process of the peer authenticating the device. |
| 1.3.6.1.4.1.164.4.2.2.9.1.4 | ColumnpppLinkStatusXUsAuthIdentity | read-only | current | The identity used in the process of the peer authenticating the device, or empty string if the peer does not authenticate the device. |
| 1.3.6.1.4.1.164.4.2.2.9.1.5 | ColumnpppLinkStatusXPeerAuthProtocol | read-only | current | The method used to authenticate the peer. |
| 1.3.6.1.4.1.164.4.2.2.9.1.6 | ColumnpppLinkStatusXPeerAuthState | read-only | current | The state of the process of authenticating the peer. |
| 1.3.6.1.4.1.164.4.2.2.9.1.7 | ColumnpppLinkStatusXPeerAuthIdentity | read-only | current | The identity used in the process of authenticating the peer, or empty string if the peer is not required to be authenticated. |
| 1.3.6.1.4.1.164.4.2.2.9.1.8 | ColumnpppLinkStatusXIpcpState | read-only | current | IPCP phase state. |
| 1.3.6.1.4.1.164.4.2.2.9.1.9 | ColumnpppLinkStatusXIpcpLocalIp | read-only | current | Address of this device, used for encapsulating IPv4 packets in the PPP session. If no IP address is used or if IPCP negotiation was not completed this object i… |
| 1.3.6.1.4.1.164.4.2.2.9.1.10 | ColumnpppLinkStatusXIpcpLocalIpNegotiated | read-only | current | This object is true if the IPv4 address in pppLinkStatusXIpcpLocalIp was negotiated with the peer, and false oterwise. |
| 1.3.6.1.4.1.164.4.2.2.9.1.11 | ColumnpppLinkStatusXIpcpRemoteIp | read-only | current | Address of remote device, used for encapsulating IPv4 packets in the PPP session. If no IP address is used or if IPCP negotiation was not completed this object… |
| 1.3.6.1.4.1.164.4.2.2.9.1.12 | ColumnpppLinkStatusXIpv6cpState | read-only | current | IPV6CP phase state. |
| 1.3.6.1.4.1.164.4.2.2.9.1.13 | ColumnpppLinkStatusXIpv6cpLocalIp | read-only | current | Address of this device, used for encapsulating IPv6 packets in the PPP session. If no IP address is used or if IPV6CP negotiation was not completed this object… |
| 1.3.6.1.4.1.164.4.2.2.9.1.14 | ColumnpppLinkStatusXIpv6cpLocalIpNegotiated | read-only | current | This object is true if the IPv6 address in pppLinkStatusXIpv6cpLocalIp was negotiated with the peer, and false oterwise. |
| 1.3.6.1.4.1.164.4.2.2.9.1.15 | ColumnpppLinkStatusXIpv6cpRemoteIp | read-only | current | Address of remote device, used for encapsulating IPv6 packets in the PPP session. If no IP address is used or if IPV6CP negotiation was not completed this obje… |
| 1.3.6.1.4.1.164.4.2.2.10 | TablepppLinkConfigXTable | not-accessible | current | This table is used to configure PPP sessions. It augments the standard pppLinkConfigTable (rfc 1471). |
| 1.3.6.1.4.1.164.4.2.2.10.1 | RowpppLinkConfigXEntry | not-accessible | current | Each entry contains configuration of one PPP link. |
| 1.3.6.1.4.1.164.4.2.2.10.1.1 | ColumnpppLinkConfigXLowerLayer | read-write | current | ifIndex of the lower layer (e.g. Ethernet) the PPP link is bound to, or 0 if the PPP link is not bound to a lower layer. |
| 1.3.6.1.4.1.164.4.2.2.10.1.2 | ColumnpppLinkConfigXRefuseChap | read-write | current | If true, the device will not accept being authenticated by CHAP. |
| 1.3.6.1.4.1.164.4.2.2.10.1.3 | ColumnpppLinkConfigXRefuseNoAuth | read-write | current | If true, the device will not accept not being authenticated. |
| 1.3.6.1.4.1.164.4.2.2.10.1.4 | ColumnpppLinkConfigXRefusePap | read-write | current | If true, the device will not accept being authenticated by PAP. |
| 1.3.6.1.4.1.164.4.2.3 | NodelanrangerStation | |||
| 1.3.6.1.4.1.164.4.2.3.1 | TablelanrangerStationTable | not-accessible | current | A table that contains information about the stations on the remote LAN(s). A remote LANRANger contains a list of stations on its LAN, while a main LANRANger co… |
| 1.3.6.1.4.1.164.4.2.3.1.1 | RowlanrangerStationEntry | not-accessible | current | Information about a specific station, that the LANRANger lists as being on a remote LAN. |
| 1.3.6.1.4.1.164.4.2.3.1.1.1 | ColumnlanrangerStationPhysLink | read-only | current | The number of the physical link that is connected to the remote LAN on which the station with the associated instance of lanrangerStationAddress is located. Th… |
| 1.3.6.1.4.1.164.4.2.3.1.1.2 | ColumnlanrangerStationLogLink | read-only | current | The number of the logical link that is connected to the remote LAN on which the station with the associated instance of lanrangerStationAddress is located. The… |
| 1.3.6.1.4.1.164.4.2.3.1.1.3 | ColumnlanrangerStationAddress | read-only | current | The unicast MAC address of a station that the LANRANger lists as being on a remote LAN. |
| 1.3.6.1.4.1.164.4.2.3.1.1.4 | ColumnlanrangerStationStatus | read-only | current | The status of this entry. The meanings of the values are: unknown(1) : learned(2) : the value of the corresponding instance of lanrangerStationAddress was lear… |
| 1.3.6.1.4.1.164.4.2.3.1.1.5 | ColumnlanrangerStationSpoofingStatus | read-only | current | The spoofing status of this entry. |
| 1.3.6.1.4.1.164.4.2.3.2 | ScalarlanrangerLanMaxStations | read-only | current | The maximum number of stations in the station table. |
| 1.3.6.1.4.1.164.4.2.3.3 | ScalarlanrangerLanCurrentStations | read-only | current | The current number of stations in the station table. |
| 1.3.6.1.4.1.164.4.2.3.4 | NodelanrangerPermanentStation | |||
| 1.3.6.1.4.1.164.4.2.3.4.1 | ScalarlanrangerPermanentMaxEntries | read-only | current | The maximum number of entries in the permanent stations table. |
| 1.3.6.1.4.1.164.4.2.3.4.2 | ScalarlanrangerPermanentCurrentEntries | read-only | current | The current number of entries in the permanent stations table. |
| 1.3.6.1.4.1.164.4.2.3.4.3 | TablelanrangerPermanentTable | not-accessible | current | A table containing address information configured into the LANRANger by (local or network) management, specifying addresses on a remote LAN. This table objects… |
| 1.3.6.1.4.1.164.4.2.3.4.3.1 | RowlanrangerPermanentEntry | not-accessible | current | Address information configured into the remote LANRANger by (local or network) management specifying addresses on a remote LAN. |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.1 | ColumnlanrangerPermanentIfIndex | read-only | current | The number of the physical link that is connected to the remote LAN, on which the station with the associated instance of lanrangerStationAddress is located. T… |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.2 | ColumnlanrangerPermanentLogLink | read-only | current | The number of the logical link that is connected to the remote LAN, on which the station with the associated instance of lanrangerPermanentAddress is located. … |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.3 | ColumnlanrangerPermanentAddress | read-only | current | |
| 1.3.6.1.4.1.164.4.2.3.4.3.1.4 | ColumnlanrangerPermanentOperation | read-write | current | |
| 1.3.6.1.4.1.164.4.2.3.5 | NodelanrangerIpStation | |||
| 1.3.6.1.4.1.164.4.2.3.5.1 | ScalarlanrangerIpPermanentAvailableEntries | read-only | current | The available number of entries in the IP permanent stations table. |
| 1.3.6.1.4.1.164.4.2.3.5.2 | ScalarlanrangerIpPermanentCurrentEntries | read-only | current | The current number of entries in the IP permanent station table. |
| 1.3.6.1.4.1.164.4.2.3.6 | NodelanrangerSpoofingStation | |||
| 1.3.6.1.4.1.164.4.2.3.6.1 | ScalarlanrangerSpoofingMaxEntries | read-only | current | The maximum number of entries in the Spoofing station table. |
| 1.3.6.1.4.1.164.4.2.3.6.2 | ScalarlanrangerSpoofingCurrentEntries | read-only | current | The current number of entries in the Spoofing station table. |
| 1.3.6.1.4.1.164.4.2.3.6.3 | TablelanrangerSpoofingTable | not-accessible | current | |
| 1.3.6.1.4.1.164.4.2.3.6.3.1 | RowlanrangerSpoofingEntry | not-accessible | current | Spoofing parameters per entry of the Spoofing table. |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.1 | ColumnlanrangerSpoofingGroup | read-only | current | The spoofing group. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.2 | ColumnlanrangerSpoofingMacAddress | read-only | current | MAC Address of the Remote Lanrangers. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.3 | ColumnlanrangerSpoofingAging | read-only | current | Aging time defined for a whole group, in minutes. Only the LOCAL Lanranger will show this table ! |
| 1.3.6.1.4.1.164.4.2.3.6.3.1.4 | ColumnlanrangerSpoofingTimeLeft | read-only | current | Time until aging expires, per station, in minutes. Only the LOCAL Lanranger will show this table ! |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PppAuthMethod | INTEGER { noAuth (1), chap (2), pap (3) } | current | Methods used in the PPP authentication phase. noAuth is used if authentication is not required. |
| PppAuthStatus | INTEGER { notApplicable (1), initial (2), completed (3), inProgress (4), failed (5) } | current | States of the PPP authentication phase. notApplicable is used if authentication is not required. |
| PppState | INTEGER { initial (1), starting (2), closed (3), stopped (4), closing (5), stopping (6), requestSent (7), ackReceived (8), ackSent (9), opened (10) } | current | States of the state machine used in some PPP phases (rfc 1661, 4.2). |