RAD-Mpmx-MIB
1282 objects
Megaplex Maccess MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.1 | IdentitychasWanGen | Megaplex Maccess MIB. | ||
| 1.3.6.1.4.1.164.3.1.1.1 | ScalarchasVersion | read-only | current | An ASCII string for description and display of the agent chassis version. |
| 1.3.6.1.4.1.164.3.1.1.2 | ScalarchasTotalNoOfSlt | read-only | current | This entry indicates the number of physical slots in the chassis. |
| 1.3.6.1.4.1.164.3.1.1.3 | ScalarchasTotalNoOfIoSlt | read-only | current | This entry indicates the total number of physical IO slots in the chassis, (not all slots hardware should be occupied and active) . |
| 1.3.6.1.4.1.164.3.1.1.4 | ScalarchasTotalNoOfPsSlt | read-only | current | This entry indicates the number of physical Power Supply slots in the chassis. |
| 1.3.6.1.4.1.164.3.1.1.5 | ScalarchasTotalNoOfClSlt | read-only | current | This entry indicates the number of physical Common Logic slots in the chassis. |
| 1.3.6.1.4.1.164.3.1.2 | NodeagnWanGen | |||
| 1.3.6.1.4.1.164.3.1.2.1 | NodestatAgnGen | |||
| 1.3.6.1.4.1.164.3.1.2.1.1 | ScalaragnSDateFormat | read-write | current | This entry indicates the date and time format used for the agnSDateAndTimeCmd and for the alarm history report. |
| 1.3.6.1.4.1.164.3.1.2.1.2 | ScalaragnSDateCmd | read-write | current | This entry indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. This p… |
| 1.3.6.1.4.1.164.3.1.2.1.3 | ScalaragnSTimeCmd | read-write | current | This entry indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the… |
| 1.3.6.1.4.1.164.3.1.2.1.4 | ScalaragnSActiveCnfg | read-only | current | This entry specifies the unique identifier of the configuration, that is currently active and running. |
| 1.3.6.1.4.1.164.3.1.2.1.5 | ScalaragnSEditCnfg | read-only | current | This entry indicates the unique identifier of the configuration that is currently loaded into the tmp working space for manipulation and update operations. Val… |
| 1.3.6.1.4.1.164.3.1.2.1.6 | ScalaragnSLastCnfgFlipTime | read-only | current | This entry indicates the Date & Time of the last flip to the current configuration at the agent. |
| 1.3.6.1.4.1.164.3.1.2.1.7 | ScalaragnSLastCnfgFlipCause | read-only | current | This entry describes the flip's cause. |
| 1.3.6.1.4.1.164.3.1.2.1.8 | ScalaragnSEditBy | read-only | current | This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after an update(loa… |
| 1.3.6.1.4.1.164.3.1.2.1.9 | ScalaragnSClkSrc | read-only | current | This entry indicates the source of the system clock. |
| 1.3.6.1.4.1.164.3.1.2.1.10 | ScalaragnSAlrStatus | read-only | current | Indicates the alarm state in the agent level, i.e. lower level (card/port) alarms not included. critical(7) - when there is at least one active (state ON) crit… |
| 1.3.6.1.4.1.164.3.1.2.1.11 | ScalaragnSAlrStatusAll | read-only | current | Indicates the alarm state of the entire agent, i.e. including card and port alarms status. critical(7) - when there is at least one active (state ON) critical … |
| 1.3.6.1.4.1.164.3.1.2.1.12 | ScalaragnSMaskedAlrStat | read-only | current | Indicates the alarm state in the agent level,[ i.e. lower level (card/port) alarms not included] including Masked alarms. critical(7) - when there is at least … |
| 1.3.6.1.4.1.164.3.1.2.1.13 | ScalaragnSMaskedAlrStatAll | read-only | current | Indicates the alarm state of the entire agent, i.e. including card and port alarms status,including Masked alarms. critical(7) - when there is at least one act… |
| 1.3.6.1.4.1.164.3.1.2.1.14 | ScalaragnSTstStatAll | read-only | current | on(3) - when there is at least one test in progress in one of the agent cards, otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.1.2.1.15 | TableagnSAlrTable | not-accessible | current | List of agent related alarms and indications for alarms at system level. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1 | RowagnSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.1 | ColumnagnSAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.2 | ColumnagnSAlrCodeDescription | read-only | current | This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Mask… |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.3 | ColumnagnSAlrCode | read-only | current | A code identifying the alarm of an entry in the alarm status table at system level. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.4 | ColumnagnSAlrSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.5 | ColumnagnSAlrState | read-only | current | State of the alarm. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.6 | ColumnagnSAlrCounter | read-only | current | A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.7 | ColumnagnSAlrMask | read-only | current | Alarm mask : on/off. |
| 1.3.6.1.4.1.164.3.1.2.1.15.1.8 | ColumnagnSAlrInvert | read-only | current | Alarm invert : on/off. |
| 1.3.6.1.4.1.164.3.1.2.1.16 | ScalaragnSClearAlrCmd | read-write | current | Setting this attribute to ON, enforce a clear operation on all the agent(general) events. General alarms are alarms which are not specific to a card or port. T… |
| 1.3.6.1.4.1.164.3.1.2.1.17 | ScalaragnSClearAllAlrCmd | read-write | current | Setting this attribute to ON, enforce a clear operation on all MUX alarm events at the levels of agent, slots and ports. The clear operation will not be applie… |
| 1.3.6.1.4.1.164.3.1.2.1.18 | ScalaragnSSanityCheckStatus | read-only | current | Upon completion of the Sanity check process on the TmpCnfg this attribute will be set to: FAIL(2) - when there is at least one error encountered and possibly s… |
| 1.3.6.1.4.1.164.3.1.2.1.19 | ScalaragnSNoOfSanityCheckErr | read-only | current | This entry indicates the number of errors/warnings discovered by the last SanityCheck process. |
| 1.3.6.1.4.1.164.3.1.2.1.20 | TableagnSErrListTable | not-accessible | current | List of errors and warnings found during Sanity Check process. |
| 1.3.6.1.4.1.164.3.1.2.1.20.1 | RowagnSErrListEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.1.20.1.1 | ColumnagnSErrIdx | read-only | current | Unique number to identify an entry in the error list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'. |
| 1.3.6.1.4.1.164.3.1.2.1.20.1.2 | ColumnagnSErrDescription | read-only | current | This attribute is a full text description of the sanity check error including error code, slot and port numbers related to the code . |
| 1.3.6.1.4.1.164.3.1.2.1.21 | ScalaragnSMaxNoOfCnfg | read-only | current | Maximum number of configurations that can be defined and stored in the MUX. If the mux has a large capacity, the maximum will be limited to 254. |
| 1.3.6.1.4.1.164.3.1.2.1.22 | TableagnSCnfgTable | not-accessible | current | This table contains an entry per configuration. It indicates if the configuration is valid. |
| 1.3.6.1.4.1.164.3.1.2.1.22.1 | RowagnSCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.1.22.1.1 | ColumnagnSEntryIdx | read-only | current | Unique number to identify an entry in the configuration table. |
| 1.3.6.1.4.1.164.3.1.2.1.22.1.2 | ColumnagnSEntryIsValid | read-only | current | This attribute indicates whether the specific configuration is valid in the MUX . Value of NO indicates: no such configuration in the MUX. |
| 1.3.6.1.4.1.164.3.1.2.2 | NodecnfgAgnGen | |||
| 1.3.6.1.4.1.164.3.1.2.2.1 | ScalaragnCSanityCheckCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion the value will automatically be changed to off(2). |
| 1.3.6.1.4.1.164.3.1.2.2.2 | ScalaragnCSaveCnfgIdxCmd | read-write | current | This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check proc… |
| 1.3.6.1.4.1.164.3.1.2.2.3 | ScalaragnCLoadCnfgIdxCmd | read-write | current | This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is va… |
| 1.3.6.1.4.1.164.3.1.2.2.4 | TableagnCClkSrcTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.1.2.2.4.1 | RowagnCClkSrcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.1 | ColumnagnCClkCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..100) being accessed and Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.2 | ColumnagnCClkSrcIdx | read-only | current | An index to the table. There are only two entries to this table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock paramet… |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.3 | ColumnagnCClkSrcMode | read-write | current | The source of the nodal timing. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.4 | ColumnagnCClkSrcSlt | read-write | current | This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h. |
| 1.3.6.1.4.1.164.3.1.2.2.4.1.5 | ColumnagnCClkSrcPrt | read-write | current | This entry is valid only when we are working in rxClk or adaptive mode. For an invalid entry, the return value will be '7fff'h. - For rxClk mode, the values ca… |
| 1.3.6.1.4.1.164.3.1.2.2.5 | ScalaragnCDeleteCnfgIdxCmd | read-write | current | Setting this attribute will delete the requested DB from the NVRAM . |
| 1.3.6.1.4.1.164.3.1.2.2.6 | ScalaragnCDefaultCnfgIdxCmd | read-write | current | Setting this attribute will define the desired working configuration when no conditions of the Flip DB Table are fulfilled and no Net GO command was issued. Th… |
| 1.3.6.1.4.1.164.3.1.2.2.7 | TableagnCnfgDataTable | not-accessible | current | This table contains data about the agent configurations. The table will support only data about valid configurations of the agent. |
| 1.3.6.1.4.1.164.3.1.2.2.7.1 | RowagnCnfgDataEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.1 | ColumnagnCnfgIdx | read-only | current | This object indicates the Idx of the agent' Cnfg the following objects refer. 255=Temporary Cnfg (Set is done only to this configuration). |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.2 | ColumnagnCnfgDesc | read-write | current | This object is a description of the Configuration, entered by user, to enhance Cnfg recognition. |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.3 | ColumnagnCnfgUpdDate | read-only | current | This object indicates the date when last update of this configuration was performed, as it is known by the agent using its own real-time clock. The format woul… |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.4 | ColumnagnCnfgUpdTime | read-only | current | This object indicates the time when last update of this configuration was performed, as it is known by the agent using its own real-time clock. When update is … |
| 1.3.6.1.4.1.164.3.1.2.2.7.1.5 | ColumnagnCnfgUpdMnger | read-only | current | This object indicates the IP Address of the Manager who performed the last update of this configuration. When update is performed, the agent should save the IP… |
| 1.3.6.1.4.1.164.3.1.2.2.8 | NodeagnCnfgAlarm | |||
| 1.3.6.1.4.1.164.3.1.2.2.8.1 | ScalaragnCnfgAlrFilterWindow | read-write | current | Window of time, in seconds. During this Window, the alarms filter is performed. Same Window for all agent alarms that need filtering. Upon end of the Window, t… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2 | TableagnCnfgAlrTable | not-accessible | current | This table enables the user to set attributes to each alarm. Setting for a non-existing entry agnCnfgAlrMask, agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or … |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1 | RowagnCnfgAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.1 | ColumnagnCnfgAlrCode | read-only | current | The alarm code. The following attributes refer this code. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.2 | ColumnagnCnfgAlrSlot | read-only | current | The alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alar… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.3 | ColumnagnCnfgAlrPort | read-only | current | The alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. W… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.4 | ColumnagnCnfgAlrMask | read-write | current | An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.5 | ColumnagnCnfgAlrInvert | read-write | current | An attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.6 | ColumnagnCnfgAlrFilter | read-write | current | An attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated within a window of time defined by a… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.7 | ColumnagnCnfgAlrFilterSet | read-write | current | This is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default … |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.8 | ColumnagnCnfgAlrFilterReset | read-write | current | This is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.9 | ColumnagnCnfgAlrSeverity | read-write | current | An attribute defining desired severity of an alarm code per slot/port |
| 1.3.6.1.4.1.164.3.1.2.2.8.3 | TableagnCnfgAlrReportTable | not-accessible | current | This table enables the user to configure the desired Alarm Reports according to alarms severity. |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1 | RowagnCnfgAlrReportEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1.1 | ColumnagnCnfgAlrReportType | read-only | current | The alarm report type. trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off… |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1.2 | ColumnagnCnfgAlrStartReportOn | read-write | current | This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the repor… |
| 1.3.6.1.4.1.164.3.1.2.2.8.3.1.3 | ColumnagnCnfgAlrStartReportOff | read-write | current | This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the repor… |
| 1.3.6.1.4.1.164.3.1.2.2.9 | ScalaragnCOffsetCmd | read-write | current | An object defining special user request. notApplicable - is RO value for products that do not support this object. normal - nothing special u1 - user 1 - for a… |
| 1.3.6.1.4.1.164.3.1.2.2.10 | TableagnCT1E1RingTable | not-accessible | current | Configuration of all T1/E1 Ring ML cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that does not partici… |
| 1.3.6.1.4.1.164.3.1.2.2.10.1 | RowagnCT1E1RingEntry | not-accessible | current | An Entry in table agnCT1E1RingTable |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.1 | ColumnagnCT1E1RingCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.2 | ColumnagnCT1E1RingPrimeSlot | read-only | current | The slot number of the Primary card of the Ring Pair. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.3 | ColumnagnCT1E1RingPrimePort | read-only | current | The port number in the Primary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For intern… |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.4 | ColumnagnCT1E1RingSecSlot | read-create | current | The slot number of the Secondary card of the Ring Pair. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.5 | ColumnagnCT1E1RingSecPort | read-create | current | The port number in the Secondary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For inte… |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.6 | ColumnagnCT1E1RingRecTime | read-create | current | T1/E1 Ring Recovery Time (sec). Valid Values: 1..99, 65535. 65535=NA. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.7 | ColumnagnCT1E1RingRowStatus | read-create | current | This parameter allows NMS to create/delete entries of this table. The only possible supported RowStatus vaules are active (1) and destroy (6). |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.8 | ColumnagnCT1E1RingWTR | read-create | current | T1/E1 Ring Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of agnCT1E1RingRecTime must be 65535. |
| 1.3.6.1.4.1.164.3.1.2.2.10.1.9 | ColumnagnCT1E1RingDualFailDetection | read-create | current | T1/E1 Ring - Dual Failure Detection enable/disable. |
| 1.3.6.1.4.1.164.3.1.2.2.11 | ScalaragnCMainExitPort | read-write | current | An object defining the Main Exit Port for the Data of the device. In the Vmux-120 Device the Data can Exit via one of the 2 existing ports: 1. Ethernet port (2… |
| 1.3.6.1.4.1.164.3.1.2.2.12 | TableagnCBuMlTable | not-accessible | current | Configuration for Primary, Secondary and Third Link. These are used for Link Backup. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1 | RowagnCBuMlEntry | not-accessible | current | An Entry in table agnCBuMlTable |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.1 | ColumnagnCBuMlCnfgIdx | not-accessible | current | This object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.2 | ColumnagnCBuMlRole | not-accessible | current | The Role of the Link. Primary Link is the Link that should usually work. If the Primary Link fails, the data will go through the Secondary Link. If both Primar… |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.3 | ColumnagnCBuMlType | read-write | current | The Type of the Link. For E1/T1 the Link can be Link A - e1T1a or Link B - e1T1b. For ETH-NET, eth (5) can be used. For ETH-NET/USER ethNetUser (6) can be used. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.4 | ColumnagnCBuMlDefaultGateway | read-write | current | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.5 | ColumnagnCBuMlSubnetMask | read-write | current | The Link subnet mask. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.6 | ColumnagnCBuMlOamFrequency | read-write | current | Time in sec. between 2 OAM packets. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.7 | ColumnagnCBuMlOamTimeoutCycles | read-write | current | No. of cycles the Link will send OAM packets without receiving a response from the remote Link before switching to the Backup Link. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.8 | ColumnagnCBuMlWaitToRestore | read-write | current | This object defines traffic recovery time (in milliseconds) of the link after its recovery. This object is applicable only when Recovery Mode is revertive. |
| 1.3.6.1.4.1.164.3.1.2.2.12.1.9 | ColumnagnCBuMlBfdSessionNum | read-write | current | This object defines the BFD (Bidirectional Forwarding Detection) session number of the link. When no session exists or when N/A, the value will be 0. |
| 1.3.6.1.4.1.164.3.1.2.2.13 | TableagnCQ50Table | not-accessible | current | Table for the device Q50 parameters. Q50 is a Signaling protocol used between PBX devices. It is possible to control the initiation of calls using Q.50. This i… |
| 1.3.6.1.4.1.164.3.1.2.2.13.1 | RowagnCQ50Entry | not-accessible | current | An Entry in table agnCQ50Table |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.1 | ColumnagnCQ50CnfgIdx | not-accessible | current | This object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration. |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.2 | ColumnagnCQ50StopCallsThresh | read-write | current | This object indicates the Bandwidth Threshold percent (%) above which new Calls from the PBX will be disabled. |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.3 | ColumnagnCQ50DiscardPktThresh | read-write | current | This object indicates the Bandwidth Threshold percent (%) above which voice packets will be discarded. Usually, the value selected should be higher than the va… |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.4 | ColumnagnCQ50BlockNewModemVbdCallsThresh | read-write | current | This object indicates the Modem VBD Calls Threshold percent (%) above which new modem calls will be rejected. |
| 1.3.6.1.4.1.164.3.1.2.2.13.1.5 | ColumnagnCQ50BlockNewModemRelayCallsThresh | read-write | current | This object indicates the Modem Relay Calls Threshold percent (%) above which new modem calls will be rejected. |
| 1.3.6.1.4.1.164.3.1.2.3 | NodecmprAgnGen | |||
| 1.3.6.1.4.1.164.3.1.2.3.1 | TableagnCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1 | RowagnCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.1 | ColumnagnCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.2 | ColumnagnCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.3 | ColumnagnCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.1.1.4 | ColumnagnCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.2 | TableagnDlciCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1 | RowagnDlciCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.1 | ColumnagnDlciCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.2 | ColumnagnDlciCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.3 | ColumnagnDlciCmprDlciIdx | read-only | current | This attribute indicates a unique identifier of the Dlci, the compressed information relates to. The values are between 16 - 991. |
| 1.3.6.1.4.1.164.3.1.2.3.2.1.4 | ColumnagnDlciCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.3 | TableagnAlarmsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.3.1 | RowagnAlarmsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.3.1.1 | ColumnagnAlarmsCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.3.1.2 | ColumnagnAlarmsCmprAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.2.3.3.1.3 | ColumnagnAlarmsCmprObj | read-only | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.4 | TableagnAlrBufCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.4.1 | RowagnAlrBufCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.4.1.1 | ColumnagnAlrBufCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.4.1.2 | ColumnagnAlrBufCmprAlarmIdx | read-only | current | A unique number to identify an entry in the history alarms buffer of the agent. |
| 1.3.6.1.4.1.164.3.1.2.3.4.1.3 | ColumnagnAlrBufCmprObj | read-only | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.3.5 | TableagnSCmprErrListTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.5.1 | RowagnSCmprErrListEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.5.1.1 | ColumnagnSCmprErrVersion | read-only | current | The version of the compressed data |
| 1.3.6.1.4.1.164.3.1.2.3.5.1.2 | ColumnagnSCmprErrIdx | read-only | current | Unique number to identify an entry in the errors list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'. |
| 1.3.6.1.4.1.164.3.1.2.3.5.1.3 | ColumnagnSCmprErrObj | read-only | current | This attribute is a full text description of the error, including: error code, slot and port numbers related to the code . |
| 1.3.6.1.4.1.164.3.1.2.3.6 | TableagnTsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1 | RowagnTsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.1 | ColumnagnTsCmprVerIdx | read-only | current | This object indicates the version of the internal format of the Compressed data. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.2 | ColumnagnTsCmprCnfgIdx | read-only | current | This object indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary… |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.3 | ColumnagnTsCmprSlotIdx | read-only | current | This object indicates the Slot to which the Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19). NA=… |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.4 | ColumnagnTsCmprPortIdx | read-only | current | This object indicates the Port within the Slot, to which the Compressed information is related. For Port Index see each product's spec. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.5 | ColumnagnTsCmprPduIdx | read-only | current | This object indicates the PDU index within the same port. That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port. |
| 1.3.6.1.4.1.164.3.1.2.3.6.1.6 | ColumnagnTsCmprData | read-write | current | This object is the compressed information itself. It provides information about all TSs of a port. |
| 1.3.6.1.4.1.164.3.1.2.3.7 | TableagnXCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1 | RowagnXCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.1 | ColumnagnXCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. One of the types is V5.1 Variant data. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.2 | ColumnagnXCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data. |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.3 | ColumnagnXCmprIdx3 | read-only | current | 3rd index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Com… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.4 | ColumnagnXCmprIdx4 | read-only | current | 4th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot positio… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.5 | ColumnagnXCmprIdx5 | read-only | current | 5th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.6 | ColumnagnXCmprIdx6 | read-only | current | 6th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.7 | ColumnagnXCmprIdx7 | read-only | current | 7th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be a… |
| 1.3.6.1.4.1.164.3.1.2.3.7.1.8 | ColumnagnXCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.2.4 | NodealrBuffGen | |||
| 1.3.6.1.4.1.164.3.1.2.4.1 | TablealrBufTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1 | RowalrBufEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.1 | ColumnalrBufIdx | read-only | current | This attribute indicates a unique number to identify this entry |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.2 | ColumnalrBufDescription | read-only | current | This entry is a unique text description of the alarm in the buffer. The alarm description includes the following information: alarm code, slot id, card type, c… |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.3 | ColumnalrBufCode | read-only | current | A code identifying the alarm of an entry in the alarm buffer table. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.4 | ColumnalrBufSlot | read-only | current | The slot number this alarm refers to. When the alarm refers to a system alarm, the value will be 'notApplicable(255)'. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.5 | ColumnalrBufPort | read-only | current | The port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.6 | ColumnalrBufSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.2.4.1.1.7 | ColumnalrBufState | read-only | current | State of the alarm (On/Off). |
| 1.3.6.1.4.1.164.3.1.2.4.2 | ScalaralrBufferClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2). For MP-2100/… |
| 1.3.6.1.4.1.164.3.1.2.4.3 | ScalaralrBufIdxUponLastAck | read-only | current | This attribute indicates the value of alrBufIdx for the last existing entry of alrBufTable, when alrBufferClearCmd was last Set to on(3). That will enable a us… |
| 1.3.6.1.4.1.164.3.1.2.5 | NodeagnFlipDb | |||
| 1.3.6.1.4.1.164.3.1.2.5.1 | TableagnCAgendaTable | not-accessible | current | This table devides the week days into categories needed for DB flip consideration. |
| 1.3.6.1.4.1.164.3.1.2.5.1.1 | RowagnCAgendaEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.5.1.1.1 | ColumnagnCAgendaCnfgIdx | read-only | current | Active or Temporary Agenda Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.5.1.1.2 | ColumnagnCAgendaDayIdx | read-only | current | Day of week |
| 1.3.6.1.4.1.164.3.1.2.5.1.1.3 | ColumnagnCAgendaDayCategory | read-write | current | The Category of the Day |
| 1.3.6.1.4.1.164.3.1.2.5.2 | TableagnCFlipNetEventsTable | not-accessible | current | This table holds the Net Events the MUX should trace |
| 1.3.6.1.4.1.164.3.1.2.5.2.1 | RowagnCFlipNetEventsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.1 | ColumnagnCFlipNetEventsCnfgIdx | read-only | current | Active or Temporary Net Events Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.2 | ColumnagnCFlipNetEventIdx | read-only | current | Entry within the table |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.3 | ColumnagnCFlipNetEventActive | read-write | current | Indicates if the entry is valid. In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object shou… |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.4 | ColumnagnCFlipNetEventType | read-write | current | The Net Event type |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.5 | ColumnagnCFlipNetEventNo | read-write | current | The Net Event No. (Bit Index) |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.6 | ColumnagnCFlipNetEventSlot | read-write | current | The slot to which the net event relates . Not applicable for time event |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.7 | ColumnagnCFlipNetEventPort | read-write | current | The port within the relevant slot. Valid values: - extPrt1(1)..exPrt16(16) - notApplicable(100) - inPrt1(101)..inPrt84(184) |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.8 | ColumnagnCFlipNetEventISD | read-write | current | The time in seconds since the Net Event was reported as ON until it is considered as ON. Not relevant for time events. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.9 | ColumnagnCFlipNetEventOSD | read-write | current | The time in seconds since the net event was reported as OFF until it is considered as OFF. Not relevant for time events. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.10 | ColumnagnCFlipNetEventDayType | read-write | current | The time event relates to all days defined in this category in the agnCAgendaTable. Applicable only for time event |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.11 | ColumnagnCFlipNetEventStartTime | read-write | current | The time event will be activated at this time. The format is hh:mm. |
| 1.3.6.1.4.1.164.3.1.2.5.2.1.12 | ColumnagnCFlipNetEventEndTime | read-write | current | The time event will be deactivated at this time. The format is hh:mm. |
| 1.3.6.1.4.1.164.3.1.2.5.3 | TableagnCFlipTable | not-accessible | current | The DB Flip Decisions Table |
| 1.3.6.1.4.1.164.3.1.2.5.3.1 | RowagnCFlipEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.1 | ColumnagnCFlipCnfgIdx | read-only | current | Active or Temporary Flip Decisions Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.2 | ColumnagnCFlipIdx | read-only | current | Entry number within the table |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.3 | ColumnagnCFlipActive | read-write | current | Indicates if the entry is valid. In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object shoul… |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.4 | ColumnagnCFlipLogicalExp | read-write | current | A logical expression composed of events numbers (which were configured in the 'AgnCFlipNetEvantsTable') and logical operators ('|', '&', '!', '(', ')') between… |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.5 | ColumnagnCFlipDbNo | read-write | current | The ID of the required DB |
| 1.3.6.1.4.1.164.3.1.2.5.3.1.6 | ColumnagnCFlipDiscardDe | read-write | current | Indicates whether the Mux should start discarding all DE. (MP3000 Only). |
| 1.3.6.1.4.1.164.3.1.2.5.4 | NodeagnFlipDbControls | |||
| 1.3.6.1.4.1.164.3.1.2.5.4.1 | ScalaragnCFlipDbSanityCheckCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and automatically be changed to off(2). |
| 1.3.6.1.4.1.164.3.1.2.5.4.2 | ScalaragnCSaveFlipDbCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and if it is OK, it will save the Flip Db in the NVRAM, activatin… |
| 1.3.6.1.4.1.164.3.1.2.5.4.3 | ScalaragnCSaveNetCnfgIdxCmd | read-write | current | This attribute specifies the Id of the target NVRAM Cnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check pr… |
| 1.3.6.1.4.1.164.3.1.2.5.4.4 | ScalaragnCSaveNetFlipDbCmd | read-write | current | Setting this attribute to on(3) will save the Temp Flip DB Into the NVRAM without actual flip. |
| 1.3.6.1.4.1.164.3.1.2.5.4.5 | ScalaragnCNetGoCmd | read-write | current | Setting this attribute to On will broadcast a 'GO' command to the network. When a Mux receives a 'GO' command it issues a delay for 'agnCNetDelay' seconds and … |
| 1.3.6.1.4.1.164.3.1.2.5.4.6 | ScalaragnCNetDelay | read-write | current | This attribute determines the period of time in seconds that takes for a message to be transferred over all the network. After a 'GO' command the MUX issues a … |
| 1.3.6.1.4.1.164.3.1.2.5.4.7 | ScalaragnCNetEventsBcast | read-write | current | This object determines if the Net Events will be Broadcasted to other Muxes of the Net or not. disabled - Net Events will NOT be Broadcasted enabled - Net Even… |
| 1.3.6.1.4.1.164.3.1.2.5.4.8 | ScalaragnCNetEventsBcastInterval | read-write | current | When agnCNetEventsBcast is enabled, this object determines the interval of time in seconds, between two consecutive Net Events transferred over the network. De… |
| 1.3.6.1.4.1.164.3.1.2.6 | NodeagnSa | |||
| 1.3.6.1.4.1.164.3.1.2.6.1 | ScalaragnSaSwchStatus | read-only | current | This object indicates the status of the switches on the stand-alone unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bi… |
| 1.3.6.1.4.1.164.3.1.2.7 | NodeagnListDecoding | |||
| 1.3.6.1.4.1.164.3.1.2.7.1 | TableagnListDecodingTable | not-accessible | current | A decoding table . For each type of list, a description is given for each existing code. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1 | RowagnListDecodingEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.1 | ColumnagnListDecodingType | read-only | current | The type of list the decoding data refers to. alr - Alarms list sanity - Sanity Check Error list. counter - Counter type of ifPerfCounterType |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.2 | ColumnagnListDecodingCode | read-only | current | The specific code for which decoding is needed. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.3 | ColumnagnListDecodingDescription | read-only | current | The description fitting the specific code and type of list required. |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.4 | ColumnagnListDecodingDefState | read-only | current | This object is applicable only for agnListDecodingType=alr. It reports the default state/severity of each alarm. User can change the severity of the alarms def… |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.5 | ColumnagnListDecodingSeverity | read-write | current | This object is applicable only for agnListDecodingType=alr. It enables the user to select a severity for each alarm. The severity is set per alarm code (same f… |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.6 | ColumnagnListDecodingAcmRelaySlt | read-write | current | This object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. n… |
| 1.3.6.1.4.1.164.3.1.2.7.1.1.7 | ColumnagnListDecodingAcmRelayPrt | read-write | current | This object indicates the ACM port within the slot, desired for outbound relay (report) for the selected alarm. notApplicable - when agnListDecodingType=sanity… |
| 1.3.6.1.4.1.164.3.1.2.8 | NodeagnSystemDlci | |||
| 1.3.6.1.4.1.164.3.1.2.8.1 | TableagnDlciTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1 | RowagnDlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.1 | ColumnagnDlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.2 | ColumnagnDlciLSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entrie… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.3 | ColumnagnDlciLPrtIdx | read-only | current | This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect … |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.4 | ColumnagnDlciLIdx | read-only | current | This attribute indicates a unique index for each possible used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx i… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.5 | ColumnagnDlciHSltIdx | read-only | current | This attribute indicates a unique slot position In the Mux where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.6 | ColumnagnDlciHPrtIdx | read-only | current | This attribute indicates a unique port number where the DLCI is routed to - Destination Port. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.7 | ColumnagnDlciHIdx | read-only | current | This attribute indicates a unique internal connection DLCI number where the Source DLCI is routed to - the Destination Side of the DLCI. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.8 | ColumnagnDlciTxBc | read-create | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.9 | ColumnagnDlciTxBe | read-create | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.10 | ColumnagnDlciRxBc | read-create | current | This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.11 | ColumnagnDlciRxBe | read-create | current | This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.12 | ColumnagnDlciPriority | read-create | current | This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority. |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.13 | ColumnagnDlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.14 | ColumnagnDlciSpoofing | read-create | current | This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent.… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.15 | ColumnagnDlciFunnelEnable | read-create | current | This object selects Funnel activation: - disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enab… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.16 | ColumnagnDlciRoutingProtocol | read-create | current | This object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. no… |
| 1.3.6.1.4.1.164.3.1.2.8.1.1.17 | ColumnagnDlciRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For de… |
| 1.3.6.1.4.1.164.3.1.2.9 | NodeagnVoiceSwitching | |||
| 1.3.6.1.4.1.164.3.1.2.9.1 | TableagnVoiceSwConfTable | not-accessible | current | MXcess Configuration for Voice Switching. |
| 1.3.6.1.4.1.164.3.1.2.9.1.1 | RowagnVoiceSwConfEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.1 | ColumnagnVoiceSwConfIdx | read-only | current | Active or Temporary Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.2 | ColumnagnVoiceSwConfZoneId | read-write | current | 1 or 2 digits, (0-9)(1-9). |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.3 | ColumnagnVoiceSwConfNodeId | read-write | current | 1, 2 or 3 digits, (1-9),(0-9),(0-9). |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.4 | ColumnagnVoiceSwConfNoOfHops | read-write | current | Number of hops the frame will go through the net before deciding to discard the frame (like time-to-live in IP). 0 = notApplicable Default=20 . |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.5 | ColumnagnVoiceSwConfSidt | read-write | current | SIDT: Short Inter Digit Timeout used as timer (in sec.) between digits after routing is completed. The timeout indicates end of dialing and the call can then b… |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.6 | ColumnagnVoiceSwConfLidt | read-write | current | LIDT: Long Inter Digit Timeout used as timer between digits before routing is completed. If no digits were dialed and LIDT expired then the user will get an er… |
| 1.3.6.1.4.1.164.3.1.2.9.1.1.7 | ColumnagnVoiceSwConfDialPlan | read-write | current | This is the Dialing Plan method that will be used in the Voice Switching. Static Dialing Plan - Routing is defined by the current device Zone and Node ID in th… |
| 1.3.6.1.4.1.164.3.1.2.9.2 | TableagnVoiceSwConfRtTable | not-accessible | current | Routing Table for Voice Switching. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1 | RowagnVoiceSwConfRtEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.1 | ColumnagnVoiceSwConfRtDbId | read-only | current | Active or Temporary Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.2 | ColumnagnVoiceSwConfRtIdx | read-only | current | The Index of the row. |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.3 | ColumnagnVoiceSwConfRtDigits | read-create | current | Dialed digits: Series of digits 0...9, '*', '#' or '%'. The '*' and '#' can have many uses according to the user's decision. For example, they can be used as p… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.4 | ColumnagnVoiceSwConfRtAction | read-create | current | Action that the system should perform for the digits: agnVoiceSwConfRtDigits. The action that is allowed depends on the Dialing Plan. Here is the list of the a… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.5 | ColumnagnVoiceSwConfRtData | read-create | current | This field is relevant for actions hgr(6), and rep(8), numDigDP(11) and contains the following information: For hgr - the number of the Hunt Group. For rep - t… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.6 | ColumnagnVoiceSwConfRtSlot | read-create | current | Routing Slot- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.7 | ColumnagnVoiceSwConfRtPort | read-create | current | Routing Port- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). 100=noConnect (for non-routing case). |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.8 | ColumnagnVoiceSwConfRtDlci | read-create | current | Routing DLCI- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). Valid values: 0=notApplicable (for non-routing case). 1, 16..991 |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.9 | ColumnagnVoiceSwConfRtRowStatus | read-create | current | Status of the row for creating/deleting entries in the table. The only possible supported RowStatus vaules are active (1), notInService (2), notReady(3), creat… |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.10 | ColumnagnVoiceSwConfRtMaxCalls | read-create | current | Maximum no. of simultaneous voice calls that are allowed in the direction defined by the current entry. Default=0 (No Limit). |
| 1.3.6.1.4.1.164.3.1.2.9.2.1.11 | ColumnagnVoiceSwConfRtPriority | read-create | current | This attribute indicates a unique priority of the Voice Switching Route. 1 is the lowest priority and 7 is the highest priority. 0 means N/A |
| 1.3.6.1.4.1.164.3.1.2.9.5 | TableagnVoiceSwConfHGTable | not-accessible | current | Table of Hunt Groups. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1 | RowagnVoiceSwConfHGEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.1 | ColumnagnVoiceSwConfHGdbIdx | read-only | current | Active or Temporary Table. Both configurations can be read but only the Temporary can be written to. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.2 | ColumnagnVoiceSwConfHGIdx | read-only | current | For Vmux-300 devices - This object represents a combination of - Hunt Group number and Extension number OR - Port number and Extension number. For other device… |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.3 | ColumnagnVoiceSwConfHGConnect | read-write | current | This attribute indicates whether the hunt group should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.4 | ColumnagnVoiceSwConfHGExt | read-write | current | This is the extension number of the hunt group. 0 is for not valid. The allowed range is 10 - 99. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.5 | ColumnagnVoiceSwConfHGExtString | read-write | current | This is the extension string of the hunt group. This string is a combination of digits, * and #. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.6 | ColumnagnVoiceSwConfHGUserParams | read-write | current | This object indicates the User's parameters. |
| 1.3.6.1.4.1.164.3.1.2.9.5.1.7 | ColumnagnVoiceSwConfHGStatus | read-write | current | This object enables the user to create/delete entries in this table. Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) … |
| 1.3.6.1.4.1.164.3.1.2.10 | NodeagnSigProfile | |||
| 1.3.6.1.4.1.164.3.1.2.10.1 | TableagnSigProfileTable | not-accessible | current | - For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1 | RowagnSigProfileEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.1 | ColumnagnSigProfileCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. For products supporting more than one configuration,the w… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.2 | ColumnagnSigProfileIdx | read-only | current | This attribute indicates the Signaling Profile (1..5). For MP-104/204, only Profile=1 will exist. |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.3 | ColumnagnSigProfileRxTx | read-only | current | This attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML . For MP-104/204, that means: Rx : Signaling to FXS C… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.4 | ColumnagnSigProfileABCD | read-write | current | For MP-2100/MP-2200 and for MP-104/204 from R2: This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation I… |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.5 | ColumnagnSigProfileEcanActSignal | read-write | current | Echo Canceller Activation Signal. This object specifies which BIT (A, B, C, or D) and which value (0 or 1) will be used for the echo canceller activation. The … |
| 1.3.6.1.4.1.164.3.1.2.10.1.1.6 | ColumnagnSigProfileEcanRespDelay | read-write | current | Echo Canceller Response Delay. This object specifies the response delay in msec for the activation/deactivation of the echo canceller. The value should be in m… |
| 1.3.6.1.4.1.164.3.1.2.10.2 | TableagnSigProfTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. This is the general table of signaling profiles. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1 | RowagnSigProfEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.1 | ColumnagnSigProfCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.2 | ColumnagnSigProfIdx | read-only | current | This attribute indicates the Signaling Profile (1..5). |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.3 | ColumnagnSigProfName | read-write | current | Profile Name given by user. |
| 1.3.6.1.4.1.164.3.1.2.10.2.1.4 | ColumnagnSigProfType | read-write | current | Profile Type. legacy - usual signaling. The parameters for the Legacy Profiles are detailed in the agnSigProfileTable, above. r2Cas - R2 signaling. The paramet… |
| 1.3.6.1.4.1.164.3.1.2.11 | NodeagnSystemTs | |||
| 1.3.6.1.4.1.164.3.1.2.12 | NodesystemVoice | |||
| 1.3.6.1.4.1.164.3.1.2.12.1 | TablesystemVoiceTable | not-accessible | current | General Parameters for voice - system level. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1 | RowsystemVoiceEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.1 | ColumnsystemVoiceConfIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed - Active or Temporary Configurations. Idx 255 relates to the temporary TmpCnfg. All config… |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.2 | ColumnsystemVoiceNationalTone | read-write | current | Tone Characteristics (Amplitude, Frequency, delays etc.). These characteristics are defined according to the country. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.3 | ColumnsystemVoicePacketRate | read-write | current | This object indicates the G.729 and G.711 Coders transmitted Packet Rate in milliseconds. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.4 | ColumnsystemVoiceFaxSupport | read-write | current | This object allows the user to Disable/Enable Fax support. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.5 | ColumnsystemVoiceFaxRate | read-write | current | This object indicates the Fax Rate limit. It is irrelevant when Fax support is NA or disabled. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.6 | ColumnsystemVoiceModemSupport | read-write | current | This object allows the user to Disable/Enable Modem support. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.7 | ColumnsystemVoiceCoderAndRate | read-write | current | This object indicates the Coder and Rate for the Voice Compression. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.8 | ColumnsystemVoiceEchoCanceler | read-write | current | This object indicates the Echo Canceler activation. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.9 | ColumnsystemVoiceTxGain | read-write | current | This object indicates the Transmit Gain (volume) in dB. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.10 | ColumnsystemVoiceDtmfRelayMethod | read-write | current | This object indicates the DTMF Relay Method that is used to transmit DTMF tones. rfc2833(1) - inband DTMF relay according to RFC-2833. sipInfo(2) - out of band… |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.11 | ColumnsystemVoiceDtmfRelayRxPayloadType | read-write | current | This object indicates the Rx Payload Type for DTMF relay RTP packets. It is relevant only when DTMF Relay Method is RFC-2833. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.12 | ColumnsystemVoiceDtmfRelayPayloadTypeNeg | read-write | current | This object indicates whether Payload Type Negotiation is used (according to RFC-2833) or not. It is relevant only when DTMF Relay Method is RFC-2833. |
| 1.3.6.1.4.1.164.3.1.2.12.1.1.13 | ColumnsystemVoiceDtmfRelayTxPayloadType | read-write | current | This object indicates the Tx Payload Type for DTMF relay RTP packets. It is relevant only when the Payload Type Negotiation is disabled. |
| 1.3.6.1.4.1.164.3.1.2.12.2 | TablesystemVoiceCoderTable | not-accessible | current | Voice Coders table. |
| 1.3.6.1.4.1.164.3.1.2.12.2.1 | RowsystemVoiceCoderEntry | not-accessible | current | An entry in Voice Coders table. |
| 1.3.6.1.4.1.164.3.1.2.12.2.1.1 | ColumnsystemVoiceCoderConfIdx | not-accessible | current | The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m… |
| 1.3.6.1.4.1.164.3.1.2.12.2.1.2 | ColumnsystemVoiceCoderPriority | not-accessible | current | This object indicates the Coder's Priority. |
| 1.3.6.1.4.1.164.3.1.2.12.2.1.3 | ColumnsystemVoiceCoderCoderAndRate | read-write | current | This object indicates the Coder and Rate for the Voice Compression. |
| 1.3.6.1.4.1.164.3.1.3 | NodemdlWanGen | |||
| 1.3.6.1.4.1.164.3.1.3.1 | NodestatMdlGen | |||
| 1.3.6.1.4.1.164.3.1.3.1.1 | TablemdlSInstTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1 | RowmdlSInstEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.1 | ColumnmdlSInstSltIdx | read-only | current | A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For the Vmux2100 Main Board c… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.2 | ColumnmdlSInstCardType | read-only | current | This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in th… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.3 | ColumnmdlSHwVersion | read-only | current | This attribute indicates the Hardware version of the installed card in the specific slot position. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.4 | ColumnmdlSSwVersion | read-only | current | This attribute indicates the Software version of the installed card in the specific slot position. |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.5 | ColumnmdlSAlrStatus | read-only | current | Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.6 | ColumnmdlSAlrStatusAll | read-only | current | Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.7 | ColumnmdlSMaskedAlrStat | read-only | current | Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: crit… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.8 | ColumnmdlSMaskedAlrStatAll | read-only | current | Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7)… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.9 | ColumnmdlSTstStatusAll | read-only | current | This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.10 | ColumnmdlSClearAlrCmd | read-write | current | Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for m… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.11 | ColumnmdlSClearAllAlrCmd | read-write | current | Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for m… |
| 1.3.6.1.4.1.164.3.1.3.1.1.1.12 | ColumnmdlSTemperature | read-only | current | Temperature of the card, in Celsius degrees. |
| 1.3.6.1.4.1.164.3.1.3.1.2 | TablemdlSAlrTable | not-accessible | current | The list of card agent alarms ; includes also an alarm indicating existence of alarms on its ports if there are any. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1 | RowmdlSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.1 | ColumnmdlSAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.2 | ColumnmdlSAlrSltIdx | read-only | current | This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid. For the Vmux2100 Main Board clA… |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.3 | ColumnmdlSAlrCodeDescription | read-only | current | This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Mask… |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.4 | ColumnmdlSAlrCode | read-only | current | A code identifying the alarm of an entry in the alarm status table at card level. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.5 | ColumnmdlSAlrSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.6 | ColumnmdlSAlrState | read-only | current | State of the alarm. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.7 | ColumnmdlSAlrCounter | read-only | current | A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.8 | ColumnmdlSAlrMask | read-only | current | Alarm mask : on/off. |
| 1.3.6.1.4.1.164.3.1.3.1.2.1.9 | ColumnmdlSAlrInvert | read-only | current | Alarm invert : on/off. |
| 1.3.6.1.4.1.164.3.1.3.2 | NodecnfgMdlGen | |||
| 1.3.6.1.4.1.164.3.1.3.2.1 | TablemdlCPrgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1 | RowmdlCPrgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.1 | ColumnmdlCCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..100) being referred. Value 255 specifies the TmpCnfg |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.2 | ColumnmdlCSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.3 | ColumnmdlCPrgCardType | read-write | current | This attribute indicates the type of card assigned to the specific slot in the common configuration. This object is identical in all the configurations (1..100… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.4 | ColumnmdlCNoOfExternPrt | read-only | current | Number of external ports in the programmed card of the specific slot position |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.5 | ColumnmdlCNoOfInternPrt | read-only | current | Number of internal ports in the programmed card of the specific slot position. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.6 | ColumnmdlCWorkMode | read-write | current | Working mode of the card. The user may configure the card to work in a stand alone mode or integrated with the device. Example for use in MHS-IP cards: - stand… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.7 | ColumnmdlCDhcpClientEnable | read-write | current | Enable/Disable the feature of DHCP Client for the selected card. |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.8 | ColumnmdlCRdnExists | read-only | current | This object indicates whether any port of the programmed card is configured to be part of a Redundancy/APS pair. If at least one port of the programmed card is… |
| 1.3.6.1.4.1.164.3.1.3.2.1.1.9 | ColumnmdlCInterfaces | read-only | current | Octet string which indicates 'present' interfaces in card. Each '0' bit stands for non-present interface. Each '1' bit stands for present interface. For ASMi54… |
| 1.3.6.1.4.1.164.3.1.3.3 | NodecmprMdlGen | |||
| 1.3.6.1.4.1.164.3.1.3.3.1 | TablemdlCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1 | RowmdlCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.1 | ColumnmdlCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.2 | ColumnmdlCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.3 | ColumnmdlCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.4 | ColumnmdlCmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va… |
| 1.3.6.1.4.1.164.3.1.3.3.1.1.5 | ColumnmdlCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.3.3.2 | TablemdlAlarmsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1 | RowmdlAlarmsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.1 | ColumnmdlAlarmsCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.2 | ColumnmdlAlarmsCmprAlarmSlot | read-only | current | This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.3 | ColumnmdlAlarmsCmprAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.3.3.2.1.4 | ColumnmdlAlarmsCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.4 | NodeprtWanGen | |||
| 1.3.6.1.4.1.164.3.1.4.1 | NodestatPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.1.1 | TableprtSInstTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1 | RowprtSInstEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.1 | ColumnprtSInstSltIdx | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..io(16) are not valid. For the V… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.2 | ColumnprtSInstPrtIdx | read-only | current | This attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the valid external ports (interfa… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.3 | ColumnprtSInstPrtType | read-only | current | This attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other options are only for MX 30/300 wh… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.4 | ColumnprtSInstIfIndex | read-only | current | This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.5 | ColumnprtSActiveStatus | read-only | current | This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the ch is not c… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.6 | ColumnprtSAlrStatus | read-only | current | Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.7 | ColumnprtSMaskedAlrStat | read-only | current | Indicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.8 | ColumnprtSClearAlrCmd | read-write | current | Setting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will not be applied for masked/inv… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.9 | ColumnprtSTestMask | read-only | current | This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit wil… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.10 | ColumnprtSTstCmd | read-write | current | Setting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the operation is not legal, the mux w… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.11 | ColumnprtSTstDuration | read-write | current | This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operations. The resolution will be a… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.12 | ColumnprtSBertClrCmd | read-write | current | Setting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.13 | ColumnprtSBertTstRslt | read-only | current | This attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is active on the specific port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.14 | ColumnprtSInterfaceType | read-only | current | This attribute indicates a unique HW interface type of the selected port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.15 | ColumnprtSParamStatus | read-only | current | This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Oct… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.16 | ColumnprtSTestMaskXp | read-write | current | This is an Expanded test mask of the prtSTestMask object. The prtSTestMask object reached its maximum, being an Integer with 32 bits. This object indicates whi… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.17 | ColumnprtSRdnStatus | read-only | current | Redundancy Status of this port. noRdn - this port is not part of a Redundancy pair/group. offline - this port is offline from Redundancy point of view. online … |
| 1.3.6.1.4.1.164.3.1.4.1.2 | TableprtSAlrTable | not-accessible | current | The list of port agent alarms. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1 | RowprtSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.1 | ColumnprtSAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.2 | ColumnprtSAlrSltIdx | read-only | current | This attribute indicates a unique identifier of the slot where the card is inserted. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.3 | ColumnprtSAlrPrtIdx | read-only | current | This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a port which does not exist. Valid… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.4 | ColumnprtSAlrCodeDescription | read-only | current | This attribute is a full text description of the alarm. The alarm description includes the following information: alarm code, alarm text, alarm severity, Maske… |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.5 | ColumnprtSAlrCode | read-only | current | A code identifying the alarm of an entry in the alarm status table at port level. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.6 | ColumnprtSAlrSeverity | read-only | current | The severity of the alarm. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.7 | ColumnprtSAlrState | read-only | current | State of the alarm. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.8 | ColumnprtSAlrCounter | read-only | current | A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.9 | ColumnprtSAlrMask | read-only | current | Alarm mask : on/off. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.10 | ColumnprtSAlrInvert | read-only | current | Alarm invert : on/off. |
| 1.3.6.1.4.1.164.3.1.4.1.2.1.11 | ColumnprtSAlrCardType | read-only | current | This attribute indicates the type of card installed in the specific slot position. The enumeration is according to mdlSInstCardType. |
| 1.3.6.1.4.1.164.3.1.4.1.3 | NodestatisPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.1 | NodeprtFrStatis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1 | TableprtFrStatisTable | not-accessible | current | This table is applicable only for an active port running an FR protocol . |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1 | RowprtFrStatisEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.1 | ColumnprtFrStatisSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni… |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.2 | ColumnprtFrStatisPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.3 | ColumnprtFrStatisInvIdx | read-only | current | The Interval of 15 min. for which the following statistics counters are applicable. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.4 | ColumnprtFrTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interva… |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.5 | ColumnprtFrRxTotalFrames | read-only | current | The total number of frames received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.6 | ColumnprtFrTxTotalFrames | read-only | current | The total number of frames sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.7 | ColumnprtFrRxTotalBytes | read-only | current | The total number of bytes received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.8 | ColumnprtFrTxTotalBytes | read-only | current | The total number of bytes sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.9 | ColumnprtFrRxMngFrames | read-only | current | The management number of frames received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.10 | ColumnprtFrTxMngFrames | read-only | current | The management number of frames sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.11 | ColumnprtFrRxDeFrames | read-only | current | The number of De frames received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.12 | ColumnprtFrTxDeFrames | read-only | current | The number of De frames sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.13 | ColumnprtFrRxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.14 | ColumnprtFrTxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.15 | ColumnprtFrRxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.16 | ColumnprtFrTxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.17 | ColumnprtFrRxFecn | read-only | current | Number of frames received by this port during the selected interval, indicating forward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.18 | ColumnprtFrTxFecn | read-only | current | Number of frames sent by this port during the selected interval, indicating forward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.19 | ColumnprtFrRxBecn | read-only | current | Number of frames received by this port during the selected interval, indicating backward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.20 | ColumnprtFrTxBecn | read-only | current | Number of frames sent by this port during the selected interval, indicating backward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.21 | ColumnprtFrRxBeViol | read-only | current | Number of data frames received by this port during the selected interval, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.22 | ColumnprtFrTxBeViol | read-only | current | Number of data frames sent by this port during the selected interval, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.23 | ColumnprtFrRxBcViol | read-only | current | Number of data frames received by this port during the selected interval, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.24 | ColumnprtFrTxBcViol | read-only | current | Number of data frames sent by this port during the selected interval, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2 | NodeprtCrStatis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1 | TableprtCrStatisTable | not-accessible | current | This table is applicable only for an active port running a CR protocol . |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1 | RowprtCrStatisEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.1 | ColumnprtCrStatisSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni… |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.2 | ColumnprtCrStatisPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.3 | ColumnprtCrStatisInvIdx | read-only | current | The Interval of 15 min. for which the following statistics counters are applicable. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.4 | ColumnprtCrTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interva… |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.5 | ColumnprtCrRxTotalCells | read-only | current | The total number of cells received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.6 | ColumnprtCrTxTotalCells | read-only | current | The total number of cells sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.7 | ColumnprtCrRxDataCells | read-only | current | The number of Data Cells received by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.8 | ColumnprtCrTxDataCells | read-only | current | The number of Data Cells sent by this port during the selected interval. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3 | NodeprtDlciStatis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1 | TableprtDlciStatisTable | not-accessible | current | This table is applicable only for an active port running an FR, FR+ or CR protocol, with valid DLCIs . |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1 | RowprtDlciStatisEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.1 | ColumnprtDlciSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni… |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.2 | ColumnprtDlciPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.3 | ColumnprtDlciIdx | read-only | current | This attribute indicates a unique DLCI index for each valid DLCI (16..991). |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.4 | ColumnprtDlciRxDeFrames | read-only | current | The number of De frames received by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.5 | ColumnprtDlciTxDeFrames | read-only | current | The number of De frames sent by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.6 | ColumnprtDlciRxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, received by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.7 | ColumnprtDlciTxDcrdCongDeFr | read-only | current | The number of De frames discarded due to congestion, sent by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.8 | ColumnprtDlciRxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, received by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.9 | ColumnprtDlciTxDcrdCongAllFr | read-only | current | All the frames discarded due to congestion, sent by this DLCI. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.10 | ColumnprtDlciTxFecn | read-only | current | Number of frames sent by this DLCI, indicating forward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.11 | ColumnprtDlciTxBecn | read-only | current | Number of frames sent by this DLCI, indicating backward congestion. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.12 | ColumnprtDlciRxBeViol | read-only | current | Number of data frames received by this DLCI, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.13 | ColumnprtDlciTxBeViol | read-only | current | Number of data frames sent by this DLCI, exceeding the Burst Excess value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.14 | ColumnprtDlciRxBcViol | read-only | current | Number of data frames received by this DLCI, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.15 | ColumnprtDlciTxBcViol | read-only | current | Number of data frames sent by this DLCI, exceeding the Burst Committed value. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4 | NodeprtT1Statis | |||
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1 | TableprtT1FdlMsgTable | not-accessible | current | This table is applicable for a T1 interface with 'esf' LineType . |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1 | RowprtT1FdlMsgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.1 | ColumnprtT1FdlMsgSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.2 | ColumnprtT1FdlMsgPrtIdx | read-only | current | This attribute indicates a unique port number. MTML-1/T1 modules have just one external interface. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.3 | ColumnprtT1FdlMsgFdlTxRx | read-only | current | The Fdl tx/rx reference of the Fdl message. |
| 1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.4 | ColumnprtT1FdlMsg | read-only | current | FDL message. |
| 1.3.6.1.4.1.164.3.1.4.2 | NodecnfgPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.2.1 | TableprtExTsSplitTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExTsBitTest that will be written directly to the Active Configuration. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1 | RowprtExTsSplitEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.1 | ColumnprtExTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.2 | ColumnprtExTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for s… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.3 | ColumnprtExTsPrtIdx | read-only | current | This attribute indicates a unique port number. Most ML cards have only one external interface. inPrt1 - for MTML-H/E1 cards. For other products' index see thei… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.4 | ColumnprtExTsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 i… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.5 | ColumnprtExTsBit | read-only | current | This attribute indicates a unique Bit within the time slot. The valid Bits are: 1..8. 255=NA. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.6 | ColumnprtExTsIConSlot | read-write | current | This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.7 | ColumnprtExTsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected/routed port. For other products' index see their specification. |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.8 | ColumnprtExTsBitTest | read-write | current | This attribute indicates a test to be activated on the selected Bit. It is applicable only when prtExPh1MlTsTest=split(254). none - no test is applied for the … |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.9 | ColumnprtExTsTxSignaling | read-only | current | Link - Tx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is sent to Link for the selected TS, for A,B,C,D Signaling Bits… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.10 | ColumnprtExTsRxSignaling | read-only | current | Link - Rx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is received from Link for the selected TS, for A,B,C,D Signalin… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.11 | ColumnprtExTsTxIoSignaling | read-only | current | IO - Tx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is sent to IO port for the selected TS, for A,B,C,D Signaling Bit… |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.12 | ColumnprtExTsRxIoSignaling | read-only | current | IO - Rx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is received from IO port for the selected TS, for A,B,C,D Signali… |
| 1.3.6.1.4.1.164.3.1.4.2.2 | NodeprtCnfgAgenda | |||
| 1.3.6.1.4.1.164.3.1.4.2.2.1 | TableprtAgendaBehaviourTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1 | RowprtAgendaBehaviourEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.1 | ColumnprtAgendaBehaviourCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.2 | ColumnprtAgendaBehaviourSltIdx | read-only | current | This parameter should be: - slot number for MX3000 - 255 = N/A for MX300/30. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.3 | ColumnprtAgendaBehaviourPrtIdx | read-only | current | This parameter should be: - port number for MX300/30 - 100 = N/A for MX3000. |
| 1.3.6.1.4.1.164.3.1.4.2.2.1.1.4 | ColumnprtAgendaBehaviourOnOff | read-write | current | Setting this command to on(3) enables the agenda function at module (3000) or port (300/30) level. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2 | TableprtCnfgAgendaTable | not-accessible | current | This table allows the user to schedule the time a session is active per week basis. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1 | RowprtCnfgAgendaEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.1 | ColumnprtCnfgAgendaCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.2 | ColumnprtCnfgAgendaSltIdx | read-only | current | This attribute is equal to: -slot number for MX3000 -255 = N/A for MX300/30 |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.3 | ColumnprtCnfgAgendaPrtIdx | read-only | current | This attribute is equal to: - port number for MX300/30 - port number for MX3000. For example 1-4 in MHS-4 cards. - 100 = N/A for MX3000 when not used. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.4 | ColumnprtCnfgAgendaDayIdx | read-only | current | This attribute for which day of the week this row applies. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.5 | ColumnprtCnfgAgendaSesId | read-only | current | The user may define 4 different active intervals per day. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.6 | ColumnprtCnfgAgendaFrom | read-write | current | Start from time interval in seconds. |
| 1.3.6.1.4.1.164.3.1.4.2.2.2.1.7 | ColumnprtCnfgAgendaTo | read-write | current | To time interval in seconds. |
| 1.3.6.1.4.1.164.3.1.4.2.3 | TableprtGenCnfgTable | not-accessible | current | This table allows the user to configure general port parameters. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1 | RowprtGenCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.1 | ColumnprtGenCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.2 | ColumnprtGenCnfgSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.3 | ColumnprtGenCnfgPrtIdx | read-only | current | This attribute indicates a unique external or internal port number. For MP: exPrt1 (1) .. exPrt16 (16) , notApplicable(100), inPrt1 (101) .. inPrt84 (184) |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.4 | ColumnprtGenCnfgLinkToSlot | read-write | current | This attribute indicates the slot of the ML card to which the IO port is mapped. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.5 | ColumnprtGenCnfgLinkToPort | read-write | current | This attribute indicates the port in the prtGenCnfgLinkToSlot of the ML card to which the IO port is mapped. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exP… |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.6 | ColumnprtGenCnfgPortId | read-write | current | IO Port Id for V5.1 use. This object is applicable only for part of the PSTN and ISDN IO ports. Generally, 0 is a valid value. Nevertheless, for ports that do … |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.7 | ColumnprtGenCnfgBusConnection | read-write | current | This object indicates the support of the card regarding Bus Connection. Same value for all ports of the card. partial = 2 Buses (AB) full = 4 Buses (ABCD) part… |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.8 | ColumnprtGenCnfgInbandMng | read-write | current | This object indicates whether Inband Management is used over the link. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.9 | ColumnprtGenCnfgInbandMngRoutProt | read-write | current | This object indicates the Inband Mng Routing Protocol of the port. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.10 | ColumnprtGenCnfgProtectionMode | read-write | current | This object indicates the Protection Mode of the port. notApplicable- when Bus Protection Point=No. For VC-4/Omni card this object is supported RO. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.11 | ColumnprtGenCnfgConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.1.4.2.3.1.12 | ColumnprtGenCnfgSignalingType | read-write | current | This object selects the Type of Signaling used by the port. |
| 1.3.6.1.4.1.164.3.1.4.3 | NodecmprPrtGen | |||
| 1.3.6.1.4.1.164.3.1.4.3.1 | TableprtCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1 | RowprtCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.1 | ColumnprtCmprTypIdx | read-only | current | This attribute indicates the Type of the Compressed being referred. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.2 | ColumnprtCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.3 | ColumnprtCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.4 | ColumnprtCmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va… |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.5 | ColumnprtCmprPrtIdx | read-only | current | This attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 (1) .. exPrt16 (16) , inPrt1 (101) .. inPr… |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.6 | ColumnprtCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.4.3.1.1.7 | ColumnprtCmprStatisticObj | read-only | current | This attribute is the compressed statistics information itself. |
| 1.3.6.1.4.1.164.3.1.4.3.2 | TableprtDlciCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1 | RowprtDlciCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.1 | ColumnprtDlciCmprCnfgIdx | read-only | current | This attribute indicates the configuration to which the Compressed information is related. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.2 | ColumnprtDlciCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.3 | ColumnprtDlciCmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the module is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not … |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.4 | ColumnprtDlciCmprPrtIdx | read-only | current | This attribute indicates a unique identifier of the port the compressed information relates to. All the values are valid. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.5 | ColumnprtDlciCmprDlciIdx | read-only | current | This attribute indicates a unique identifier of the Dlci the compressed information relates to. The values are between 16 - 991. |
| 1.3.6.1.4.1.164.3.1.4.3.2.1.6 | ColumnprtDlciCmprObj | read-write | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.4.3.3 | TableprtAlarmsCmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.4.3.3.1 | RowprtAlarmsCmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.1 | ColumnprtAlarmsCmprVersion | read-only | current | This attribute indicates the version of the internal format of the Compressed data |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.2 | ColumnprtAlarmsCmprAlarmSlot | read-only | current | This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For Stand-alone units, notApplica… |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.3 | ColumnprtAlarmsCmprAlarmPort | read-only | current | This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a non-existing port. IP Bundles ar… |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.4 | ColumnprtAlarmsCmprAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table of the agent. |
| 1.3.6.1.4.1.164.3.1.4.3.3.1.5 | ColumnprtAlarmsCmprObj | read-only | current | This attribute is the compressed information itself. |
| 1.3.6.1.4.1.164.3.1.5 | NodemapWanGen | |||
| 1.3.6.1.4.1.164.3.1.5.1 | TableagnLinkMapTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.1.5.1.1 | RowagnLinkMapEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.1.5.1.1.1 | ColumnmapLinkId | read-only | current | A unique identifier of the link |
| 1.3.6.1.4.1.164.3.1.5.1.1.2 | ColumnmapLinkSltIdx | read-write | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries clA(3), io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.1.5.1.1.3 | ColumnmapLinkPrtIdx | read-write | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.1.5.1.1.4 | ColumnmapLinkStatus | read-only | current | This attribute indicates the status of the link between the two muxes |
| 1.3.6.1.4.1.164.3.1.6 | NodediverseIfWanGen | |||
| 1.3.6.1.4.1.164.3.2 | NodemuxHub | |||
| 1.3.6.1.4.1.164.3.2.0 | IdentitymuxHubEvents | current | The events for . | |
| 1.3.6.1.4.1.164.3.2.0.1 | NotificationalarmsTrap | current | This trap is sent whenever alarm occurs in the agent. | |
| 1.3.6.1.4.1.164.3.2.0.2 | NotificationsanityTrap | current | This trap is sent after a data base update. It returns the sanity result status and the configuration no. checked. If the result is of Flip DB Sanity Check, th… | |
| 1.3.6.1.4.1.164.3.2.0.3 | NotificationcnfgFlipTrap | current | This trap is sent upon change of the active Configuration DB. Attached, is the new active Configuration no. | |
| 1.3.6.1.4.1.164.3.2.0.4 | NotificationflipDbChangeTrap | current | This trap is sent upon change of the active Flip tables (Flip DB). | |
| 1.3.6.1.4.1.164.3.2.0.5 | NotificationstatusChangedTrap | current | This trap is sent upon any change of the LEDs status. | |
| 1.3.6.1.4.1.164.3.2.1 | NodeagnMux | |||
| 1.3.6.1.4.1.164.3.2.2 | NodemdlMux | |||
| 1.3.6.1.4.1.164.3.2.2.1 | NodecnfgMdlMux | |||
| 1.3.6.1.4.1.164.3.2.2.1.1 | NodemdlPbxFramerCnfg | |||
| 1.3.6.1.4.1.164.3.2.2.1.1.1 | TablemdlPbxFramerCnfgTable | not-accessible | current | This table contains parameters relevant to a module belonging to a digital voice system, except mdlPbxFraEnhEcho which is relevant also for analog cards. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1 | RowmdlPbxFramerCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.1 | ColumnmdlPbxFraCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.2 | ColumnmdlPbxFraSltIdx | read-only | current | The slot relevant to this module. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.3 | ColumnmdlPbxFraEnhEcho | read-write | current | Refers to external ports of an analogue module and to the internal ports of the other mvc4 types of modules. ms16(3) means that the four voice ports have enhan… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.4 | ColumnmdlPbxFraTSGroupAss | read-write | current | In case of T1 modules: group1=(1,2,3,4), ...., group6=(21,22,23,24) while in case of E1 modules: - If prtExPh1MlLineType=g732sE1 or g732sE1CRC: group1=(1,2,3,4… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.5 | ColumnmdlPbxFraSignalMode | read-write | current | Refers to the signaling mode of the Framer module. tieTrunk(2), tieInvert(3), casTrans(4) are standard coding of the signaling protocol. casTrans(4) is Channel… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.6 | ColumnmdlPbxFraSignalVector | read-write | current | In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bi… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.7 | ColumnmdlPbxFraSignalMask | read-write | current | In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the 'don't care' A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Ho… |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.8 | ColumnmdlPbxFraFramerSlot | read-write | current | Slot where is sitting the Framer. |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.9 | ColumnmdlPbxFraSignaling | read-write | current | Signaling - describes the way the signaling ABCD bits pass from the local extension to the remote extension and vice-versa. endToEnd = the signaling ABCD bits … |
| 1.3.6.1.4.1.164.3.2.2.1.1.1.1.10 | ColumnmdlPbxFraTransSigTs | read-write | current | This is the Time Slot that is used for Transparent CCS signaling. The values of this TS are 1-24 for T1 & 1-31 for E1. The default for E1 is 16 & for T1 it is … |
| 1.3.6.1.4.1.164.3.2.2.1.2 | TablemdlProtIpTable | not-accessible | current | This table contains Protected IP Addresses for ML-IP cards when working in IP Ring Mode. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1 | RowmdlProtIpEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.1 | ColumnmdlProtIpCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed. Idx 255 relates to the TmpCnfg. For Agents having several configuration, Write operation is allowe… |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.2 | ColumnmdlProtIpSlotIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the 2104 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.3 | ColumnmdlProtIpAddress | read-only | current | A Protected IP address. |
| 1.3.6.1.4.1.164.3.2.2.1.2.1.4 | ColumnmdlProtIpRowStatus | read-create | current | This parameter allows creating/deleting entries of this table. |
| 1.3.6.1.4.1.164.3.2.2.2 | NodestatMdlMux | |||
| 1.3.6.1.4.1.164.3.2.2.2.1 | TablemdlStatTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.2.2.2.1.1 | RowmdlStatEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.1 | ColumnmdlStatSltIdx | read-only | current | A unique number to identify a slot position in the mux. In the 2104 Unit the entries psB(2),clB(4),io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.2 | ColumnmdlStatHostIP | read-only | current | The host interface IP address when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.3 | ColumnmdlStatHostMask | read-only | current | The host interface subnet mask when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes |
| 1.3.6.1.4.1.164.3.2.2.2.1.1.4 | ColumnmdlStatDefaultGateway | read-only | current | Default Gateway's IP Address when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes |
| 1.3.6.1.4.1.164.3.2.3 | NodeprtMux | |||
| 1.3.6.1.4.1.164.3.2.3.1 | NodestatPrtMux | |||
| 1.3.6.1.4.1.164.3.2.3.1.6 | TableprtSExHsfStatTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1 | RowprtSExHsfStatEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.1 | ColumnprtSExHsfSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.2 | ColumnprtSExHsfPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.3 | ColumnprtSExHsfInterfaceTyp | read-only | current | This attribute indicates a unique interface type of a selected port. |
| 1.3.6.1.4.1.164.3.2.3.1.6.1.4 | ColumnprtSExHsfRts | read-only | current | This attribute indicates a unique RTS control signal state. |
| 1.3.6.1.4.1.164.3.2.3.1.16 | TableprtIsdnStatusTable | not-accessible | current | This table contains ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1 | RowprtIsdnStatusEntry | not-accessible | current | Entries for ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.1 | ColumnprtIsdnStatusDspMode | read-only | current | The DSP can be in one of the following Modes: Voice, Idle, Fax, Voice Band Data (VBD)- Modem. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.2 | ColumnprtIsdnStatusCallState | read-only | current | The state that the current call is in. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.3 | ColumnprtIsdnStatusCallingNumber | read-only | current | This is the local Number (ISDN Address) associated with this entry. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.4 | ColumnprtIsdnStatusCalledNumber | read-only | current | This is the remote Number (ISDN Address) associated with this entry. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.5 | ColumnprtIsdnStatusCalledIP | read-only | current | This is the remote IP Address associated with this entry. |
| 1.3.6.1.4.1.164.3.2.3.1.16.1.6 | ColumnprtIsdnStatusCallDirection | read-only | current | Attribute indicating the Direction of the Call. The value of notApplicable will be used for example when prtIsdnStatusCallState = notActive(14). |
| 1.3.6.1.4.1.164.3.2.3.2 | NodecnfgPrtMux | |||
| 1.3.6.1.4.1.164.3.2.3.2.1 | NodeprtClCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.1.1 | TableprtExClCnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1 | RowprtExClCnfgEntry | not-accessible | current | All the entries at this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.1 | ColumnprtExClCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.2 | ColumnprtExClSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. Because the second Cl is only for redundancy, all the parameters are identical in t… |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.3 | ColumnprtExClPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.4 | ColumnprtExClUsage | read-only | current | This attribute indicates what is the usage of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.5 | ColumnprtExClRate | read-only | current | This attribute indicates the operation rate of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.6 | ColumnprtExClDataBits | read-only | current | This attribute indicates the number of data bits in async frame |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.7 | ColumnprtExClParity | read-only | current | This attribute indicates if the parity operation mode in async frame |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.8 | ColumnprtExClStopBits | read-only | current | This attribute indicates the minimum number of stop bits in the tx async frame |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.9 | ColumnprtExClRoutingProtocol | read-only | current | This attribute indicates the routing protocol of the port. When prtExClUsage is nmsSlip or nmsPpp - all values are applicable . Else - only 'none' is applicabl… |
| 1.3.6.1.4.1.164.3.2.3.2.1.1.1.10 | ColumnprtExClEnabled | read-only | current | This attribute indicates if Ethernet port of CL is enabled or not for management. It is applicable only on the ETH port of the CL, when the MP includes an ML-I… |
| 1.3.6.1.4.1.164.3.2.3.2.2 | NodeprtPh1MlCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.2.1 | TableprtExPh1MlCnfgTable | not-accessible | current | - For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1 | RowprtExPh1MlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.1 | ColumnprtExPh1MlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.2 | ColumnprtExPh1MlSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main … |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.3 | ColumnprtExPh1MlPrtIdx | read-only | current | This attribute indicates a unique port number. MP-2100/2200: MTML-1/E1 and MTML-1/T1 cards have only one external interface. inPrt1, inPrt2 - for MTML-H/2E1 an… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.4 | ColumnprtExPh1MlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the card considerations because it may indicat… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.5 | ColumnprtExPh1MlLineType | read-write | current | |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6 | ColumnprtExPh1MlLineCode | read-write | current | This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.7 | ColumnprtExPh1MlLineLen | read-write | current | This attribute is the line length parameter used only for T1/DSU interfaces. lenXXXpXXXft = len-XXX-XXXft. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.8 | ColumnprtExPh1MlRestoreTime | read-write | current | The time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and … |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.9 | ColumnprtExPh1MlTxGain | read-write | current | This attribute is the tx gain parameter used only for T1/CSU interfaces. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.10 | ColumnprtExPh1MlRxSensitivity | read-write | current | This attribute is the rx line sensitivity parameter. low26dBm, high36dBm - applicable for T1-CSU shortHaul, longHaul - applicable for MTML-4 cards low15dbm was… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.11 | ColumnprtExPh1MlIdleCode | read-write | current | Determines the code for transmission in empty time slots. Type value(00-FFH), Excluding 0H,8H,10H,12H,21H,24H,42H,49H, 84H,92H |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.12 | ColumnprtExPh1MlTdmTrunk | read-write | current | This attribute indicates whether the port is used to transfer TDM cards data and through which Bus. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.13 | ColumnprtExPh1MlClkMode | read-write | current | Defines the clock operation mode of the T1/E1 interface. Ports that are connected to the TDM Buses must be in nodalTiming(3) clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.14 | ColumnprtExPh1MlMfClkSrcSlt | read-write | current | This attribute indicates whether the port Tx multiframe is synchronized with Rx multiframe of another port and the slot position of that port. This operation i… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.15 | ColumnprtExPh1MlMfClkSrcPrt | read-write | current | A unique number to identify a port position in the mux. It has no effect when the prtExPh1MlMfClkSrcSlt selected is Local. inPrt1 - for MTML-H/E1 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.16 | ColumnprtExPh1MlFdlType | read-write | current | A unique number to identify the side of the FDL operation. Normal: 'response' for the user side and 'command' for the PTT side. Applicable only when working wi… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.17 | ColumnprtExPh1MlInbandMng | read-write | current | A unique number to identify an Inband management over the link. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.18 | ColumnprtExPh1MlInbandMngRate | read-write | current | A unique number to identify the rate of the Inband management (Kbps). E1 port - it is not applicable when prtExPh1MlInbandMng selected is off. T1 port - it is … |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.19 | ColumnprtExPh1MlRedundType | read-write | current | This object determines the ML redundancy type: none - no ML redundacy dualCableAIS - each ML card is connected by a separate dualCableParallelTx cable to the o… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.20 | ColumnprtExPh1MlRedundSlot | read-write | current | This object indicates the slot containing the redundacy ML card, coupled with the current ML (prtExPh1MlSltIdx). When prtExPh1MlRedundType=none (no ML redundan… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.21 | ColumnprtExPh1MlRedundPort | read-write | current | This object indicates the redundacy ML port, coupled with the current ML port (prtExPh1MlPrtIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.22 | ColumnprtExPh1MlRedundRecTime | read-write | current | Redundancy Recovery Time (sec). After switching the ML card to the current (prtExPh1MlSltIdx), the next ML switch can be performed only after a minimum time, i… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.23 | ColumnprtExPh1MlInbandMngRoutProt | read-write | current | This attribute indicates the Inband Mng routing protocol of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.24 | ColumnprtExPh1MlIfType | read-write | current | Interface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25 | ColumnprtExPh1MlMultiplier | read-write | current | The data rate of each TS. The multiplier values can be 56 kbps or 64 kbps. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.26 | ColumnprtExPh1MlSupportedTS | read-only | current | Number of Supported Time Slots by the agent. For Vmux-110 there is HW that supports less than 31/24 Time Slots for the E1/T1 port. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.27 | ColumnprtExPh1MlImpedance | read-write | current | The Line Impedance. For T1 (always balanced), impedance is 100 ohm. For E1: - balanced = 120 ohm - unbalanced = 75 ohm. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.28 | ColumnprtExPh1MlQ50BwControl | read-write | current | This object enables configuration of Q.50 Bandwidth Control on the port. If the bandwidth exceeds a certain threshold it is possible to disable new calls in th… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.29 | ColumnprtExPh1MlQ50SignalPair | read-write | current | Q.50 Signaling bits Pair that is currently in use: A&B bits or C&D bits. For Annex B it will always be: aAndB (2). |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.30 | ColumnprtExPh1MlInternalSwitch | read-write | current | This parameter shows whether the data will be transferred from one port to the other port within the same group of 2 ports. The default value is: Enable. Disab… |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.31 | ColumnprtExPh1MlSigService | read-write | current | Signaling Service given by this link. notApplicable - for T1 links normal - usual Signaling advanced - V5 Signaling. |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.32 | ColumnprtExPh1MlFragmentSize | read-write | current | This parameter indicates the maximum number of bytes permitted in a packet send over the Link. Exceeding this size will cause packet fragmentation. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2 | TableprtExPh1MlTsTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExPh1MlTsTest that will be written directly to the Active Configuratio… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1 | RowprtExPh1MlTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.1 | ColumnprtExPh1MlTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.2 | ColumnprtExPh1MlTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main Bo… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.3 | ColumnprtExPh1MlTsPrtIdx | read-only | current | This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have only one external interface. exPrt2 - for ME1-2, MT1-2 and mhsPri cards. exPrt3… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.4 | ColumnprtExPh1MlTsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is … |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.5 | ColumnprtExPh1MlTsIConSlot | read-write | current | This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.6 | ColumnprtExPh1MlTsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected/routed port. For MP, the values will be: { exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.7 | ColumnprtExPh1MlTsIConTs | read-write | current | This attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is … |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.8 | ColumnprtExPh1MlTsExt | read-only | current | A pointer to an extension of this table: prtExTsSplitTable. - If prtExPh1MlTsIConSlot='split', its value should be set to the OBJECT IDENTIFIER of the prtExTsS… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.9 | ColumnprtExPh1MlTsTest | read-write | current | This attribute indicates a test to be activated on the selected TS. It is applicable only when prtSTstCmd=testPerTS(31). notApplicable - when prtSTstCmd is NOT… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.10 | ColumnprtExPh1MlTsType | read-write | current | The Time Slot Type. Transparent - means that the Time Slot will be Rx/Tx as is without processing it. If the device requires more than 1 unique data or ss7 Tim… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.11 | ColumnprtExPh1MlTsBundle | read-write | current | The number of the bundle containing this Time Slot. If no bundle exists for this TS or the bundle number is irrelevant, the value will be 0. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.12 | ColumnprtExPh1MlTsTestDuration | read-write | current | This attribute indicates the maximum duration of executing a test on the specific TS. This entry applies to all the test operations. For the Vmux2100 the value… |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.13 | ColumnprtExPh1MlTsSubChType | read-write | current | The Time Slot Sub-Channel Type. This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8). |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.14 | ColumnprtExPh1MlTsSubChMask | read-write | current | The Sub-Channel Type Mask. This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8). |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.15 | ColumnprtExPh1MlTsChRate | read-write | current | The Rate of the Signaling Channel. notApplicable(1) when TS Type is other than Signaling or Transparent |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.16 | ColumnprtExPh1MlTsByteReversal | read-write | current | Byte Reversal. This variable defines whether the LSB or MSB is transmitted first. no(2) - MSB is transmitted first yes(3) - LSB is transmitted first. |
| 1.3.6.1.4.1.164.3.2.3.2.2.2.1.17 | ColumnprtExPh1MlTsSigProfile | read-write | current | This object indicates the Signaling Profile of the port. It is applicable only when prtMl4SigProfile=perTS. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = p… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3 | TableprtInPh1MlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1 | RowprtInPh1MlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.1 | ColumnprtInPh1MlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.2 | ColumnprtInPh1MlSltType | read-only | current | This attribute indicates a unique slot position where the card is inserted. For ISDN BRI port of MX300/30: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 … |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.3 | ColumnprtInPh1MlPrtIdx | read-only | current | This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have three internal interfaces. MX3000 modules may have up to 50 internal ports. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.4 | ColumnprtInPh1MlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.5 | ColumnprtInPh1MlRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.6 | ColumnprtInPh1MlProtocol | read-write | current | This attribute indicates the applied protocol. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.7 | ColumnprtInPh1MlConnectionTyp | read-write | current | This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management operation (LMI,CLMM...). CIR check. NMS network ma… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.8 | ColumnprtInPh1MlCongResponse | read-write | current | This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/receive becn to/from the networ… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.9 | ColumnprtInPh1MlCongLevel | read-write | current | This attribute indicates the level of delayed data in precents of the total available dynamic memory, for which the port will start to operate . The resolution… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.10 | ColumnprtInPh1MlTc | read-write | current | This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identica… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.11 | ColumnprtInPh1MlFlowControl | read-write | current | This attribute indicates the required flow control betweeen the port and the remote equipment. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.12 | ColumnprtInPh1MlSegment | read-write | current | This object is the Segmentation in Bytes. In protocol FR+, ISDN internals, MX 30/300 the segmentation is: 50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6) In MX 3000… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.13 | ColumnprtInPh1MlFrMngProt | read-write | current | This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR a… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.14 | ColumnprtInPh1MlEnqPeriod | read-write | current | This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network … |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.15 | ColumnprtInPh1MlFullRptPeriod | read-write | current | This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sen… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.16 | ColumnprtInPh1MlFrWindowSize | read-write | current | This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.17 | ColumnprtInPh1MlErrorsThreshold | read-write | current | This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.18 | ColumnprtInPh1MlMaxIdleTime | read-write | current | Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=Never. Never move to higher prioritized connected link… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.19 | ColumnprtInPh1MlBearerCh | read-write | current | Defines which B (bearer) channels are used for transferring ISDN data. Default value is: none (255). anyChannel (2) is skipped because it is not in use here. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.20 | ColumnprtInPh1MlAssociatedExCh | read-write | current | This object indicates the external port associated to this internal port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which can have up to 64 d… |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.21 | ColumnprtInPh1MlClockEncoding | read-write | current | This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.22 | ColumnprtInPh1MlMinSeparators | read-write | current | Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.23 | ColumnprtInPh1MlCcittCrc | read-write | current | This object indicates how many Bits are used for CRC (HDLC item). |
| 1.3.6.1.4.1.164.3.2.3.2.2.3.1.24 | ColumnprtInPh1MlFrameSeparator | read-write | current | This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mea… |
| 1.3.6.1.4.1.164.3.2.3.2.2.4 | TableprtInPh1MlDlciTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1 | RowprtInPh1MlDlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.1 | ColumnprtInPh1MlDlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.2 | ColumnprtInPh1MlDlciSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.3 | ColumnprtInPh1MlDlciPrtIdx | read-only | current | This attribute indicates a unique internal port number. MPH.1/E1 and MPH.1/T1 cards have three internal ports. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.4 | ColumnprtInPh1MlDlciIdx | read-only | current | This attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, then its type is 'user' and the o… |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.5 | ColumnprtInPh1MlDlciValid | read-write | current | This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.6 | ColumnprtInPh1MlDlciIConSlt | read-write | current | This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.7 | ColumnprtInPh1MlDlciIConPrt | read-write | current | This attribute indicates a unique port id which the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.8 | ColumnprtInPh1MlDlciIConDlci | read-write | current | This attribute indicates a unique internal connection dlci number which the src dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.9 | ColumnprtInPh1MlDlciTxBc | read-write | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.10 | ColumnprtInPh1MlDlciTxBe | read-write | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.11 | ColumnprtInPh1MlDlciRxBc | read-write | current | This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.12 | ColumnprtInPh1MlDlciRxBe | read-write | current | This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.13 | ColumnprtInPh1MlDlciPriority | read-write | current | This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority. |
| 1.3.6.1.4.1.164.3.2.3.2.2.4.1.14 | ColumnprtInPh1MlDlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.2.3.2.2.5 | TableprtPhMlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1 | RowprtPhMlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.1 | ColumnprtPhMlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.2 | ColumnprtPhMlSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For the Vmux2100 Ma… |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.3 | ColumnprtPhMlPrtIdx | read-only | current | This attribute indicates a unique port number. ML-20 cards have just one external interface. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.4 | ColumnprtPhMlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.5 | ColumnprtPhMlRate | read-write | current | This attribute indicates the configured port speed. auto - rate is adapted automatically to the attached modem rate. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.6 | ColumnprtPhMlCAS | read-write | current | This attribute indicates whether Channel Associated Signaling (CAS) is used. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.7 | ColumnprtPhMlClockMode | read-write | current | Clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.8 | ColumnprtPhMlSatBuffer | read-write | current | Satellite Buffer (+/- 256). |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.9 | ColumnprtPhMlDialProcess | read-write | current | Dial Process. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.10 | ColumnprtPhMlSyncRestore | read-write | current | Sync Restoration time, in seconds. notApplicable=0. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.11 | ColumnprtPhMlBus | read-write | current | The TDM BUS this port is linked to. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.12 | ColumnprtPhMlMfSyncSlot | read-write | current | This attribute indicates whether the sync is synchronized according to a certain card and the slot of this card. This operation is required in order to bypass … |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.13 | ColumnprtPhMlClockSource | read-write | current | The Clock Source: TC (Tx Clock) or RC (Rx Clock) signals. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.14 | ColumnprtPhMlErrCorrection | read-write | current | This object indicates if Error Correction mechanism should be applied or not. It will be applicable only if the interface HW includes the Error Correction chip. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.15 | ColumnprtPhMlCorrectionMode | read-write | current | This object is applicable only when prtPhMlErrCorrection=yes. random - enables to correct up to 3 random errors in an 23 bit frame built from 12 data bits and … |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.16 | ColumnprtPhMlControlSignals | read-write | current | This object shows whether the Port will ignore or implement the control signals like DCD, CTS, DTR. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.17 | ColumnprtPhMlInterfaceType | read-write | current | The SW Configurable Interface Type. |
| 1.3.6.1.4.1.164.3.2.3.2.2.5.1.18 | ColumnprtPhMlClockPolarity | read-write | current | This object indicates the clock polarity. |
| 1.3.6.1.4.1.164.3.2.3.2.3 | NodeprtPhPlCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.3.1 | TableprtExPhPlCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1 | RowprtExPhPlCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.1 | ColumnprtExPhPlCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.2 | ColumnprtExPhPlSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.3 | ColumnprtExPhPlPrtIdx | read-only | current | This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.4 | ColumnprtExPhPlConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.5 | ColumnprtExPhPlHRate | read-write | current | |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.6 | ColumnprtExPhPlLRate | read-write | current | |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.7 | ColumnprtExPhPlProtocol | read-write | current | This object indicates the applied protocol. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.8 | ColumnprtExPhPlConnectionTyp | read-write | current | This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management opration (LMI,CLMM...). CIR check. NMS network man… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.9 | ColumnprtExPhPlClkMode | read-write | current | Clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.10 | ColumnprtExPhPlDceClkSrc | read-write | current | This attribute indicates the source of the clock when working in dce or ext-dce clock mode. notApplicable(1) - is applied for dte(3) and lbt(5) clock modes. Wh… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.11 | ColumnprtExPhPlCongResponse | read-write | current | This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/received becn to/from the netwo… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.12 | ColumnprtExPhPlCongLevel | read-write | current | This attribute indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The re… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.13 | ColumnprtExPhPlTc | read-write | current | This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identica… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.14 | ColumnprtExPhPlFlowControl | read-write | current | This attribute indicates the required flow control betweeen the port and the remote equipment. fecnBecn - is valid only for FR, FR+ and CR protocols. xonXoff,d… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.15 | ColumnprtExPhPlDcdRts | read-write | current | Protocol may require end to end connect indication over the network. End to end link connection establishment over the FR network will be indicated to the user… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.16 | ColumnprtExPhPlDcdRtsControlPath | read-write | current | Protocol may require end to end connect indication over the network. This parameter defines whether to take the user connection status (RTS(DCE)/DCD(DTE)) and … |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.17 | ColumnprtExPhPlDataBits | read-write | current | This attribute indicates the number of data bits in async frame. It is relevant only for Async protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.18 | ColumnprtExPhPlParity | read-write | current | This attribute indicates the parity operation mode in async frame. It is relevant only for Async protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.19 | ColumnprtExPhPlStopBits | read-write | current | This attribute indicates the minimum number of stop bits in the tx async frame. It is relevant only for Async protocols. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.20 | ColumnprtExPhPlLXon | read-write | current | This attribute indicates the character used as X-On to notify receive enable. This parameter is valid only for async protocols. Valid values: 0..255. The value… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.21 | ColumnprtExPhPlLXoff | read-write | current | This attribute indicates the character used as X-Off to notify receive disable. This parameter is valid only for async protocols. Valid values: 0..255. The val… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.22 | ColumnprtExPhPlFrMngProt | read-write | current | This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR a… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.23 | ColumnprtExPhPlEnqPeriod | read-write | current | This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network … |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.24 | ColumnprtExPhPlFullRptPeriod | read-write | current | This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sen… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.25 | ColumnprtExPhPlFrWindowSize | read-write | current | This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.26 | ColumnprtExPhPlErrorsThreshold | read-write | current | This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.27 | ColumnprtExPhPlPvcCreateMsg | read-write | current | This object is Update Message (if required or not). It determines whether a message of a New PVC Creation is requested or not (yes/no). Default = no. This para… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.28 | ColumnprtExPhPlCllmMsg | read-write | current | This object is CLLM Message (if required or not). It determines whether to send (or not) a congestion message when the port is Rx congested. Default = no. This… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.29 | ColumnprtExPhPlProtDelayLevel | read-write | current | This object is the Segmentation in Bytes. In some cases, the enumerated values will mean other segmentation values than specified: Product: MX-3000 MX-3000 MX-… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.30 | ColumnprtExPhPlClockEncoding | read-write | current | This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols. For MAXCESS 3000 & MP2100H: when setting to nrzI (3) … |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.31 | ColumnprtExPhPlMinSeparators | read-write | current | Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.32 | ColumnprtExPhPlCcittCrc | read-write | current | This object indicates how many Bits are used for CRC (HDLC item). |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.33 | ColumnprtExPhPlFrameSeparator | read-write | current | This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mea… |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.34 | ColumnprtExPhPlIdleCode | read-write | current | Determines the code for transmission when there are no frames to transmit on the line. The value should be 0 to FFH. |
| 1.3.6.1.4.1.164.3.2.3.2.3.1.1.35 | ColumnprtExPhPlJitter | read-write | current | Maximum variant delay of the FR network, in msec. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2 | TableprtExPhPlDlciTable | not-accessible | current | The write operation into the Table Objects is valid only at the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1 | RowprtExPhPlDlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.1 | ColumnprtExPhPlDlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.2 | ColumnprtExPhPlDlciSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.3 | ColumnprtExPhPlDlciPrtIdx | read-only | current | This attribute indicates a unique internal port number. PH.1/E1 and PH.1/T1 cards have three internal ports. Stand-alone units may have six such ports. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.4 | ColumnprtExPhPlDlciIdx | read-only | current | This attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, its type is 'user' and the only v… |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.5 | ColumnprtExPhPlDlciValid | read-write | current | This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.6 | ColumnprtExPhPlDlciIConSlt | read-write | current | This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. cl - will represent any of the CL slots. This value can be sele… |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.7 | ColumnprtExPhPlDlciIConPrt | read-write | current | This attribute indicates a unique port id which the dlci is routed to. clNMS - will be used for NMS SNMP messages. It can be any port of the CL card. This valu… |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.8 | ColumnprtExPhPlDlciIConDlci | read-write | current | This attribute indicates a unique internal connection dlci number, the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.9 | ColumnprtExPhPlDlciTxBc | read-write | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.10 | ColumnprtExPhPlDlciTxBe | read-write | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.11 | ColumnprtExPhPlDlciRxBc | read-write | current | This attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.12 | ColumnprtExPhPlDlciRxBe | read-write | current | This attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.13 | ColumnprtExPhPlDlciPriority | read-write | current | This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority. |
| 1.3.6.1.4.1.164.3.2.3.2.3.2.1.14 | ColumnprtExPhPlDlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.2.3.2.3.3 | TableprtExPhPlModemTable | not-accessible | current | External Modem Parameters. The write operation into the Table Objects is valid only for the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1 | RowprtExPhPlModemEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.1 | ColumnprtExPhPlModemCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.2 | ColumnprtExPhPlModemSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.3 | ColumnprtExPhPlModemPrtIdx | read-only | current | This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.4 | ColumnprtExPhPlModemStatus | read-write | current | This object indicates whether a Dial Up Modem is enabled on this port. Default: disable For Vmux devices this object shows whether there is Modem Relay support. |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.5 | ColumnprtExPhPlModemActivate | read-write | current | This object indicates whether the Dial Up Modem is activated when the first frame is received or it is always activated. Default: onFirstFrame |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.6 | ColumnprtExPhPlModemMaxIdleTime | read-write | current | Max Time allowed in Seconds without any traffic before the line is disconnected. Legal Values are: 1 sec, 2 sec .. 5 sec, 10 sec, 20 sec.. 1 min, 2 min .. 10 m… |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.7 | ColumnprtExPhPlModemTimeBtwnCalls | read-write | current | Minimum Time in Seconds which is required after a call was disconnected. In this time no other call will be initiated from this Modem port even if there were f… |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8 | ColumnprtExPhPlModemCallDelay | read-write | current | Time in Seconds that the device will wait before dialing to the remote device. This feature is mostly used when there is a backup modem to the main link and th… |
| 1.3.6.1.4.1.164.3.2.3.2.4 | NodeprtLs2Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.4.1 | TableprtExLs2CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1 | RowprtExLs2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.1 | ColumnprtExLs2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.2 | ColumnprtExLs2SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.3 | ColumnprtExLs2PrtIdx | read-only | current | This attribute indicates a unique port index. For the Ls2/X.58 exPrt(7)..exPrt(10) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.4 | ColumnprtExLs2Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.5 | ColumnprtExLs2Rate | read-write | current | Port rates. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.6 | ColumnprtExLs2ClkMode | read-write | current | This attribute indicates a unique port operation clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.7 | ColumnprtExLs2Cts | read-write | current | CTS. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.8 | ColumnprtExLs2Dcd | read-write | current | DCD. |
| 1.3.6.1.4.1.164.3.2.3.2.4.1.1.9 | ColumnprtExLs2EnvIdx | read-write | current | Envelope Index. When prtInLs2EnvAssign=auto, the value is 0 (not applicable). |
| 1.3.6.1.4.1.164.3.2.3.2.4.2 | TableprtInLs2CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1 | RowprtInLs2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.1 | ColumnprtInLs2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.2 | ColumnprtInLs2SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.3 | ColumnprtInLs2PrtIdx | read-only | current | This attribute indicates a unique internal port index. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.4 | ColumnprtInLs2Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module h… |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.5 | ColumnprtInLs2Group | read-write | current | This attribute indicates the group number of the port. LS-2 internal ports with the same group number share the same Time slot of the main link |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.6 | ColumnprtInLs2Member | read-write | current | This attribute indicates the group member id of the port. This parameter is for the automatic envelope assignment algorithm. |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.7 | ColumnprtInLs2LinkTo | read-write | deprecated | It indicates the slot of the main link card to which the LS2 card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfg… |
| 1.3.6.1.4.1.164.3.2.3.2.4.2.1.8 | ColumnprtInLs2EnvAssign | read-write | current | Envelope assignment type. |
| 1.3.6.1.4.1.164.3.2.3.2.5 | TableprtVc2CnfgTable | not-accessible | current | - For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1 | RowprtVc2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.1 | ColumnprtVc2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.2 | ColumnprtVc2SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. For Stand Alone products like WR: notApplicable (255) |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.3 | ColumnprtVc2PrtIdx | read-only | current | A unique identifier of the port, within the card. For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports the values will be: exPrt1 (1) exPrt2 (2) exPr… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.4 | ColumnprtExVc2Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.5 | ColumnprtExVc2TransGain | read-write | current | Transmit gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.6 | ColumnprtExVc2ReceiveGain | read-write | current | Receive gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be … |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.7 | ColumnprtExVc2Wire | read-write | current | For some cards, this object is equal for all the ports in the specific card because of HW limitations. For FXO & FXS this parameter is not applicable. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.8 | ColumnprtExVc2CodingLaw | read-write | current | This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for … |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.9 | ColumnprtExVc2Sig | read-write | current | This attribute indicates the method for decoding/encoding the signaling information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBit… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.10 | ColumnprtExVc2Oos | read-write | current | This object is equal for all the ports in the specific card because of HW limitations |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.11 | ColumnprtExVc2LinkTo | read-write | deprecated | This attribute indicates the slot of the ML card to which the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGen… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.12 | ColumnprtExVc2OperMode | read-write | current | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.13 | ColumnprtExVc2SigProfile | read-write | current | This object indicates the Signaling Profile of the port. notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 =… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.14 | ColumnprtExVc2CallEnable | read-write | current | This object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.15 | ColumnprtExVc2R2Delay | read-write | current | This object indicates the R2 Delay. notApplicable - for all cards except VC-2/R2. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.16 | ColumnprtExVc2CasStd | read-write | current | This object indicates the CAS (Channel Associated Signaling) Standard. notApplicable - for all cards except VC-2/R2. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.17 | ColumnprtExVc2EchoCanceler | read-write | current | Echo canceler activation. notApplicable - for VC-2 and VC-6 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.18 | ColumnprtExVc2IfType | read-write | current | Interface Type. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.19 | ColumnprtExVc2Encoding | read-write | current | Voice Encoding Mode. linear - is relevant only for the ports of VC-16A card. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.20 | ColumnprtExVc2TxBitCode | read-write | current | - - - For MP & FCD - - - This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit Co… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.21 | ColumnprtExVc2RxBitOutput | read-write | current | - - - For MP (VC-Q card only) & FCD - - - This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Pola… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.22 | ColumnprtExVc2MeterRate | read-write | current | This entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS. Meter Rate means rate of Call Meter in Public Phones, in K… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.23 | ColumnprtExVc2IfSignaling | read-write | current | This entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS cards. Interface Analog Signaling. Must be the same for all card's… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.24 | ColumnprtExVc2SeizeAck | read-write | current | This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook sig… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.25 | ColumnprtExVc2EandMType | read-write | current | This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.26 | ColumnprtExVc2RemType | read-write | current | Remote Type. Applicable for VC-6A/4LB card & for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 . |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.27 | ColumnprtExVc2ConvTime | read-write | current | Conversation Time in minutes. Applicable for VC-6A/4LB card. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.28 | ColumnprtExVc2SigFeedback | read-write | current | Signaling Feedback. Applicable for VC-8/FXO and VC-16/FXO cards. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.29 | ColumnprtExVc2EchoCancelerModule | read-only | current | This parameter indicates whether Echo canceler module exists for this port. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.30 | ColumnprtExVc2ReversePolarity | read-write | current | This object Enables/Disables Reverse Polarity for this port. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.31 | ColumnprtExVc2RingerFrequency | read-write | current | This object selects the Ringer Frequency (Hz) for this port. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.32 | ColumnprtExVc2SigService | read-write | current | Signaling Service. advanced - is relevant only for ports of VC-8, VC-16 FXS cards. It is used for Signaling Services of V5.1 or R2. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.33 | ColumnprtExVc2CallerIdEnable | read-write | current | This object Enables/Disables Receiving the Caller Id number from the remote side, for this port/channel. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.34 | ColumnprtExVc2CompressMethod | read-write | current | This object is applicable only when prtExVc2Encoding=adpcm. It defines which method is used for Compression. g726 - for 4 bits (the standard method). g726 - fo… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.35 | ColumnprtExVc2ObMode | read-write | current | This object defines the Net operation mode of the Omni-Bus card's port. pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many ta… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.36 | ColumnprtExVc2VAD | read-write | current | This object defines whether Voice Activation Detector (VAD) will be On or Off. off - will be usually selected when a Modem is connected to the port; not a phon… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.37 | ColumnprtExVc2NoiseLevelForVAD | read-write | current | This object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to deal with. notApplicable - when prtExVc2VAD=off. |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.38 | ColumnprtExVc2WesternSigMode | read-write | current | This object defines the Western Signaling Mode. detector - detects signal and passes it as is. generator - generates the signal. notApplicable - when Western H… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.39 | ColumnprtExVc2BusProtectionPoint | read-write | current | This object defines if the port is Bus Protection Point or not. notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the ed… |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.40 | ColumnprtExVc2ImpedanceStandard | read-write | current | This object defines the Standard used for Impedance. -G.712 - 600 Ohm - used in USA and other countries. -Q552/ETSI - used in some countries in Europe -Q522/It… |
| 1.3.6.1.4.1.164.3.2.3.2.6 | TableprtHsfCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1 | RowprtHsfCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.1 | ColumnprtHsfCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relate to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.2 | ColumnprtHsfSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.3 | ColumnprtHsfPrtIdx | read-only | current | This attribute indicates a unique external port index. Hs2 has only two ports (exPrt1,exPrt2). Hs3 has three ports (exPrt1,exPrt2,exPrt3). Hsq and hsqN has fou… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.4 | ColumnprtExHsfConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.5 | ColumnprtExHsfRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.6 | ColumnprtExHsfClkMode | read-write | current | This attribute indicates a unique port operation clock mode. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.7 | ColumnprtExHsfCts | read-write | current | This attribute indicates a unique CTS control line operation mode. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.8 | ColumnprtExHsfFifoSize | read-write | current | Size in bits. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.9 | ColumnprtExHsfLinkTo | read-write | deprecated | This attribute indicates a slot of Main Link module, that the port is linked to. This object is the same for all the ports in the specific card because of HW l… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.10 | ColumnprtExHsfOperMode | read-write | current | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. bidirBcastR… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.11 | ColumnprtExHsfInbandLoopback | read-write | current | This object indicates if Inband Loopback from the Network should be enabled or disabled. |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.12 | ColumnprtExHsfClkPolarity | read-write | current | This object indicates the clock polarity. For FCD-M this object will be applicable only for the fixed HS port (the fixed port on the device). |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.13 | ColumnprtExHsfControlSignal | read-write | current | This object indicates the Control Signal according to G.797 ITU-T standard. For FCD-M this object will be applicable for the fixed HS port (the fixed port on t… |
| 1.3.6.1.4.1.164.3.2.3.2.6.1.14 | ColumnprtExHsfBcastRingSrcPort | read-write | current | This object is applicable only when prtExHsfOperMode= bidirBcastRing. In this case, the values mean: - none - this port will be connected to ML in TSA as usual… |
| 1.3.6.1.4.1.164.3.2.3.2.7 | NodeprtHs4Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.7.1 | TableprtExHs4CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1 | RowprtExHs4CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.1 | ColumnprtExHs4CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.2 | ColumnprtExHs4SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.3 | ColumnprtExHs4PrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.4 | ColumnprtExHs4Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithm. It also affects all the module considerations because the card has … |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.5 | ColumnprtExHs4LineType | read-write | current | This attribute is the line type parameter for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code parameter… |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.6 | ColumnprtExHs4LineCode | read-write | current | This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code para… |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.7 | ColumnprtExHs4LineLen | read-write | current | This attribute is the line length parameter used only for T1 interfaces. len399p533ft=len-399-533ft |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.8 | ColumnprtExHs4RestoreT | read-write | current | Time passing from the disappearance of the loss of synchronization condition (red alarm), to the restoration of normal service. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.9 | ColumnprtExHs4OosSig | read-write | current | Out of Service signal type. |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.10 | ColumnprtExHs4OosCode | read-write | current | OOS Code |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.11 | ColumnprtExHs4IdleCode | read-write | current | Type value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H, 42H,49H,84H,92H |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.12 | ColumnprtExHs4MfClkSrcSlt | read-write | current | This attribute indicates whether the port Tx is multiframe synchronized with Rx multiframe of another port and the slot position of that port. This opration is… |
| 1.3.6.1.4.1.164.3.2.3.2.7.1.1.13 | ColumnprtExHs4MfClkSrcPrt | read-write | current | A unique number to identify a port position in the mux if the MultiFrame clock source is valid (YES). inPrt1 - for MTML-H/E1 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2 | TableprtExHs4TsCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1 | RowprtExHs4TsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.1 | ColumnprtExHs4TsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.2 | ColumnprtExHs4TsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.3 | ColumnprtExHs4TsPrtIdx | read-only | current | This attribute indicates a unique port number. Hs4/T1 and Hs4/T1 cards have only one external interface. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.4 | ColumnprtExHs4TsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 i… |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.5 | ColumnprtExHs4TsIConSlot | read-write | current | This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en… |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.6 | ColumnprtExHs4TsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected/routed port. |
| 1.3.6.1.4.1.164.3.2.3.2.7.2.1.7 | ColumnprtExHs4TsIConTs | read-write | current | This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Module and 1..31 for E1 interface. In G732S-E1 lines time slot 16 … |
| 1.3.6.1.4.1.164.3.2.3.2.8 | NodeprtHsiCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.8.1 | TableprtExHsiCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1 | RowprtExHsiCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.1 | ColumnprtExHsiCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.2 | ColumnprtExHsiSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.3 | ColumnprtExHsiPrtIdx | read-only | current | A unique port identifier within the card. For MP : 1..12 For DXC: 111 .. 2531. See DXC R6 spec for port index convention. For FCD-A, 'S' Interface external por… |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.4 | ColumnprtExHsiConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. v51 - this port is connected to a V5.1 interface. All rest of the … |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.5 | ColumnprtExHsiRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.6 | ColumnprtExHsiLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the HS-? card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnf… |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.7 | ColumnprtExHsiInterface | read-write | current | It indicates the interface type: lt = line termination nt = network termination te = terminal equipment. lt1 - for ASMi-31 connection (not ISDN) For MP: For HS… |
| 1.3.6.1.4.1.164.3.2.3.2.8.1.1.8 | ColumnprtExHsiActType | read-write | current | It indicates the Activation Type. Activation Type is the Synchronization type towards the PBX. It is applicable only when prtExHsiInterface=nt. notApplicable -… |
| 1.3.6.1.4.1.164.3.2.3.2.8.2 | TableprtInHsiCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. This table is not applicable for MP-2100 HS-U card type. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1 | RowprtInHsiCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.1 | ColumnprtInHsiCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.2 | ColumnprtInHsiSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.3 | ColumnprtInHsiPrtIdx | read-only | current | A unique port identifier within the card. Valid values for MP: inPrt1 (101) .. inPrt48 (148). Valid values for DXC: 11012.. 25316. See DXC R6 spec for port ind… |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.4 | ColumnprtInHsiConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.5 | ColumnprtInHsiRate | read-write | current | This object indicates the port speed. For HS-U/I and HS-S ports: 2 bit - up to 9600bps 4 bit - 19200bps 8 bit - 38400bps .. 64kbps. concentrated - this D chann… |
| 1.3.6.1.4.1.164.3.2.3.2.8.2.1.6 | ColumnprtInHsiConcentratedTo | read-write | current | The Concentration D Channel of the prtInHsiPrtIdx port. The port always belongs to the same card as prtInHsiPrtIdx port. This object is applicable only when pr… |
| 1.3.6.1.4.1.164.3.2.3.2.9 | NodeprtPVc4Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.9.1 | TableprtExPVc4CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1 | RowprtExPVc4CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.1 | ColumnprtExPVc4CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.2 | ColumnprtExPVc4SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.3 | ColumnprtExPVc4PrtIdx | read-only | current | This object indicates the port number in the selected card (slot). |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.4 | ColumnprtExPVc4PrtType | read-write | current | This object indicates the type of the selected port. In Mx 30/300 phase 4: s0 & u are for Voice over ISDN. In MX 30/300 phase 5: sQsig & uQsig are used for Voi… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.5 | ColumnprtExPVc4Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.6 | ColumnprtExPVc4IfType | read-write | current | This attribute indicates the interface type of the port. eAndM4wires and eAndM2wires - are valid only for E&M port type eAndM4wires - means 2/4 wires fxoGnd an… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.7 | ColumnprtExPVc4TxGain | read-write | current | Transmission gain in dB. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.8 | ColumnprtExPVc4RxGain | read-write | current | Reception gain in dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.9 | ColumnprtExPVc4MaxRate | read-write | current | Voice rate. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.10 | ColumnprtExPVc4Tc | read-write | current | Time interval for CIR control, in seconds. The value will be the same for all cards' ports. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.11 | ColumnprtExPVc4Oos | read-write | current | Handling type, when connection is lost. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.12 | ColumnprtExPVc4EchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.13 | ColumnprtExPVc4VarDelay | read-write | current | Maximum variant delay of the FR network, in msec. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.14 | ColumnprtExPVc4CongLevel | read-write | current | This object indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resol… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.15 | ColumnprtExPVc4Wire | read-write | current | This object indicates the wiring of the E&M port. It is applicable only for E&M card type. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.16 | ColumnprtExPVc4ExtensionType | read-write | current | This object indicates the type of extension relevant for this port. ipForceConnect (6) is used for automatic connection or automatic dialing when the phone is … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.17 | ColumnprtExPVc4ExtensionNumber | read-write | current | This is the extension number of this port. This field is relevant only when the extension type is voice switching and is read only if the port is member of a h… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.18 | ColumnprtExPVc4OutPulsing | read-write | current | This field indicates whether to outpulse the received digits. It is notApplicable(1) when the extension type is forceConnect(2). |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.19 | ColumnprtExPVc4HuntGroupMb | read-write | current | This object indicates if this port belongs to an hunt group. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.20 | ColumnprtExPVc4HuntGroupIdx | read-write | current | If it belongs to an hunt group, this fields indicates the index of the relevant hunt group. 0 = notApplicable |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.21 | ColumnprtExPVc4AutoFaxMode | read-write | current | This object indicates if the system will switch automatically to FAX mode when detecting FAX activity. Default=Yes. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.22 | ColumnprtExPVc4FaxRate | read-write | current | FAX initial rate. Default=9600 bps. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.23 | ColumnprtExPVc4SeizeAck | read-write | current | This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook sig… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.24 | ColumnprtExPVc4SignalingProtocol | read-write | current | The signaling protocol that will be used between the PABX & the voice port. Delay Start Protocol: the line is seized by sending an Off hook signal and after a … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.25 | ColumnprtExPVc4DelayStart | read-write | current | This parameter is used only for Delay Protocol. This is the time that the calling party will wait after sending an Off hook signal and before sending DTMF digi… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.26 | ColumnprtExPVc4WinkMinDuration | read-write | current | This parameter is used only for Wink Protocol. Min Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in interva… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.27 | ColumnprtExPVc4WinkMaxDuration | read-write | current | This parameter is used only for Wink Protocol. Max Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in interva… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.28 | ColumnprtExPVc4GenerateTone | read-write | current | This parameter indicates whether the device (MX or MPH) should generate dial tones for the channel. If the value is yes (3), it generates dial tones. If the va… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.29 | ColumnprtExPVc4CodingLaw | read-write | current | This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.30 | ColumnprtExPVc4GenerateRingBack | read-write | current | Determines whether the Ring Back tone is generated locally or from the remote end. The default is - NO (Meaning coming from the remote end). Yes means that the… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.31 | ColumnprtExPVc4ChannelId | read-write | current | Channel Identifier. According to FRF11 each voice port that works as force connect should add a CH Id after the DLCI in the frame header. Default : 1 Applicabl… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.32 | ColumnprtExPVc4PortConnection | read-write | current | Port connection determines whether the port is connected to a PABX (Trunk) or to Telephone set (Line) . It determines whether to send certain messages to the p… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.33 | ColumnprtExPVc4CoderAndRate | read-write | current | Coder and Rate for the Voice Compression. In MPH: Relevant for MVC-8 card only. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.34 | ColumnprtExPVc4DestinationNum | read-write | current | The destination phone number: 0 to 22 digits. Applicable for Auto Dial - ipForceConnect(6), Permanent Dial and Auto Accept Extension Types. Default: Null String |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.35 | ColumnprtExPVc4DtmfRelay | read-write | current | When DTMF RELAY is disabled, the DTMF digits (dialed by the user) are transmitted as compressed voice and in the remote unit are decompressed. When DTMF RELAY … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.36 | ColumnprtExPVc4DiscOnSilence | read-write | current | No. of silenced seconds after which the call will be disconected. A value of 0 means that there will be no disconnect when there is silence. Possible values: 0… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.37 | ColumnprtExPVc4DynamicJitter | read-write | current | The MVC8 uses two mechanisms to overcome the network delay. The first one is a static jitter buffer which holds a constant buffer of up to 300 Msec and can be … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.38 | ColumnprtExPVc4EandMType | read-write | current | This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.39 | ColumnprtExPVc4Rate | read-write | current | This is the Rate of the port in TS units. It is used by VF-30 card family. 0 = NA = port is not intended to be connected; therefore, no Rate. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.40 | ColumnprtExPVc4FrameSize | read-write | current | Defines the maximum size in Bytes of the multiplexed frame. In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless,… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.41 | ColumnprtExPVc4MultiplexInterval | read-write | current | Defines the maximum amout of time (msec.) between multiplexed frames that are sent. For Vmux-400/420 devices: It defines the Payload Packetizing Interval. Vali… |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.42 | ColumnprtExPVc4TransportProtocol | read-write | current | Transport Protocol. ptp = point to point. aal2oMpls = AAL2 over MPLS. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.43 | ColumnprtExPVc4MultiFreqRelay | read-write | current | This object enables/disables Multi Frequency Signaling Detection. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.44 | ColumnprtExPVc4MinPulseWidth | read-write | current | Defines the minimum Pulse Width in msec. Valid values: 45-100 msec. notApplicable=0. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.45 | ColumnprtExPVc4MinPowerLevel | read-write | current | Defines the minimum Power Level in dBm. Valid values: -1..-35 dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.46 | ColumnprtExPVc4SuperTandem | read-write | current | The Super Tandem feature provides end to end compression over multiple hops, solving the double compression problem detected in Voice compressing systems. The … |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.47 | ColumnprtExPVc4DestIp | read-write | current | This object defines the destination IP Address. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.48 | ColumnprtExPVc4DestBundle | read-write | current | This object defines the destination Bundle at the far-end device. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.49 | ColumnprtExPVc4SrcIpAddress | read-write | current | This object defines the Source IP Address. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.50 | ColumnprtExPVc4SrcIpMask | read-write | current | This object defines the Source IP Mask. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.51 | ColumnprtExPVc4DefaultGateway | read-write | current | This object defines the Default Gateway for this interface. |
| 1.3.6.1.4.1.164.3.2.3.2.9.1.1.52 | ColumnprtExPVc4SigPacketInterval | read-write | current | Defines the Signaling Packetizing Interval, which is the maximum time interval, measured in msec (milliseconds), between multiplexed signaling frames. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2 | TableprtExPVc4DlciTable | not-accessible | current | The write operation into the Table Objects is valid only at the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1 | RowprtExPVc4DlciEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.1 | ColumnprtExPVc4DlciCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.2 | ColumnprtExPVc4DlciSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.3 | ColumnprtExPVc4DlciPrtIdx | read-only | current | This attribute indicates a unique internal port number. VC4 cards have four external ports. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.4 | ColumnprtExPVc4DlciValid | read-write | current | This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.5 | ColumnprtExPVc4DlciIConSlt | read-write | current | This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.6 | ColumnprtExPVc4DlciIConPrt | read-write | current | This attribute indicates a unique port id which the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.7 | ColumnprtExPVc4DlciIConDlci | read-write | current | This attribute indicates a unique internal connection dlci number, the dlci is routed to. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.8 | ColumnprtExPVc4DlciTxBc | read-write | current | This attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.9 | ColumnprtExPVc4DlciTxBe | read-write | current | This attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.10 | ColumnprtExPVc4DlciRxBc | read-write | current | This attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.11 | ColumnprtExPVc4DlciRxBe | read-write | current | This attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line). |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.12 | ColumnprtExPVc4DlciPriority | read-write | current | This attribute indicates a unique priority of the pvc. 6 is the lowest priority and 8 is the highest priority. |
| 1.3.6.1.4.1.164.3.2.3.2.9.2.1.13 | ColumnprtExPVc4DlciStatus | read-only | current | This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected |
| 1.3.6.1.4.1.164.3.2.3.2.10 | NodeprtHsrCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.10.1 | TableprtExHsrCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1 | RowprtExHsrCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.1 | ColumnprtExHsrCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.2 | ColumnprtExHsrSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.3 | ColumnprtExHsrPrtIdx | read-only | current | A unique prt identifier within the card. Valid values: For MP: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104) - Fo… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.4 | ColumnprtExHsrConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.5 | ColumnprtExHsrProtocol | read-write | current | This object indicates the protocol. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.6 | ColumnprtExHsrRate | read-write | current | This object indicates the port speed. The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 115.2 kbps rates are applicable… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.7 | ColumnprtExHsrDataBits | read-write | current | Data Bits. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.8 | ColumnprtExHsrParity | read-write | current | - For HS-R card, this object indicates if the parity bit is needed or not. Therefore, the 'no' and 'yes; values are applicable. - For HS-S12, HS-U12, the parit… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.9 | ColumnprtExHsrStopBits | read-write | current | This object indicates the minimum number of stop bits in the tx async frame. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.10 | ColumnprtExHsrCts | read-write | current | CTS. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.11 | ColumnprtExHsrClkMode | read-write | current | Clock mode. This object is applicable for Sync protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.12 | ColumnprtExHsrLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is rep… |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.13 | ColumnprtExHsrDcdDsr | read-write | current | DCD & DSR. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.14 | ColumnprtExHsrOperMode | read-write | current | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.15 | ColumnprtExHsrRtsDtr | read-write | current | RTS & DTR. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.16 | ColumnprtExHsrLlbEnable | read-write | current | Enable/Disable LLB. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.17 | ColumnprtExHsrRlbEnable | read-write | current | Enable/Disable RLB. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.18 | ColumnprtExHsrRateAdapt | read-write | current | Rate Adaptation - takes a low rate and adapts it to 64Kbps. This object specifies the means this adaptation is done by. |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.19 | ColumnprtExHsrRemoteModem | read-write | current | Remote modem. asmi31s2 = ASMi-31/2 |
| 1.3.6.1.4.1.164.3.2.3.2.10.1.1.20 | ColumnprtExHsrEncapsMode | read-write | current | Low Speed encapsulation method over PCM. When Encapsulation mode is Latency optimized, only rates up to 19.2 are supported. In this case a double number of bit… |
| 1.3.6.1.4.1.164.3.2.3.2.11 | NodeprtMbeCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.11.1 | TableprtExMbeCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1 | RowprtExMbeCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.1 | ColumnprtExMbeCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.2 | ColumnprtExMbeSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.3 | ColumnprtExMbePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.11.1.1.4 | ColumnprtExMbeLan | read-write | current | This attribute indicates whether the MBE port is operated as main or remote bridge. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2 | TableprtInMbeCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1 | RowprtInMbeCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.1 | ColumnprtInMbeCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.2 | ColumnprtInMbeSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.3 | ColumnprtInMbePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.4 | ColumnprtInMbeConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.5 | ColumnprtInMbeRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.11.2.1.6 | ColumnprtInMbeLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - thi… |
| 1.3.6.1.4.1.164.3.2.3.2.12 | NodeprtTreCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.12.1 | TableprtExTreCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1 | RowprtExTreCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.1 | ColumnprtExTreCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.2 | ColumnprtExTreSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.3 | ColumnprtExTrePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.4 | ColumnprtExTreLan | read-write | current | This attribute indicates whether the TRE port is operated as main or remote bridge. Default=remote. |
| 1.3.6.1.4.1.164.3.2.3.2.12.1.1.5 | ColumnprtExTreLanRate | read-write | current | This attribute indicates the Rate of the TRE port in Mbit/sec. Default-r4M. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2 | TableprtInTreCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1 | RowprtInTreCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.1 | ColumnprtInTreCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.2 | ColumnprtInTreSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.3 | ColumnprtInTrePrtIdx | read-only | current | A unique port identifier within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.4 | ColumnprtInTreConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.5 | ColumnprtInTreRate | read-write | current | This attribute indicates the port speed. |
| 1.3.6.1.4.1.164.3.2.3.2.12.2.1.6 | ColumnprtInTreLinkTo | read-write | deprecated | It indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - thi… |
| 1.3.6.1.4.1.164.3.2.3.2.13 | NodeprtLs6Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.13.1 | TableprtExLs6CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1 | RowprtExLs6CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.1 | ColumnprtExLs6CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.2 | ColumnprtExLs6SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.3 | ColumnprtExLs6PrtIdx | read-only | current | This attribute indicates a unique port index. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.4 | ColumnprtExLs6Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.5 | ColumnprtExLs6Protocol | read-write | current | This attribute indicates the protocol. async - can be selected only for ports 1-2. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.6 | ColumnprtExLs6Rate | read-write | current | Port rates in bps. g1 - contains the values : (2)-(6),(9),(12),(16) g2 - contains the values : (7),(10),(14),(19) g3 - contains the values : (8),(11),(13),(15)… |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.7 | ColumnprtExLs6ClkMode | read-write | current | This attribute indicates a unique port operation clock mode. It is applicable for Sync protocol only . |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.8 | ColumnprtExLs6CtrlSignal | read-write | current | Control Signal. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.9 | ColumnprtExLs6DataBits | read-write | current | Data Bits. This object is applicable for Async protocol only. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.10 | ColumnprtExLs6Cts | read-write | current | This object indicates the CTS control line operation mode. |
| 1.3.6.1.4.1.164.3.2.3.2.13.1.1.11 | ColumnprtExLs6LinkToInternal | read-write | current | This object indicates which internal port of the card, the external port is linked to. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2 | TableprtExLs6VCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1 | RowprtExLs6VCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.1 | ColumnprtExLs6VCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.2 | ColumnprtExLs6VSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.3 | ColumnprtExLs6VPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.4 | ColumnprtExLs6VConnect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.5 | ColumnprtExLs6VRate | read-write | current | Rate (bps) used for FAX transmission and Voice coding. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.6 | ColumnprtExLs6VEchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.7 | ColumnprtExLs6VIfType | read-write | current | This attribute indicates the interface type of the port. w4wire - is applicable only for E&M port type. |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.8 | ColumnprtExLs6VTxGain | read-write | current | Transmit gain in dBm. E&M - values range: -17 .. 8 FXO - values range: -16 .. 4 FXS - values range: -13 .. 8 |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.9 | ColumnprtExLs6VRxGain | read-write | current | Receive gain in dBm. E&M - values range: -17 .. 2 FXO - values range: -17 .. -1 FXS - values range: -17 .. 2 |
| 1.3.6.1.4.1.164.3.2.3.2.13.2.1.10 | ColumnprtExLs6VOos | read-write | current | Out of Service signaling mode. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3 | TableprtInLs6CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1 | RowprtInLs6CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.1 | ColumnprtInLs6CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.2 | ColumnprtInLs6SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.3 | ColumnprtInLs6PrtIdx | read-only | current | This attribute indicates a unique internal port index. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.4 | ColumnprtInLs6Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module h… |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.5 | ColumnprtInLs6TandemMode | read-write | current | This object indicates the Tandem Mode. tandemSlave - is valid only for an LS-6 card having on the (current slot-1) an LS-6 card with 'tandemMaster' mode. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.6 | ColumnprtInLs6Rate | read-write | current | Main Rate in Kbps. |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.7 | ColumnprtInLs6RemoteType | read-write | current | Remote Type. notApplicable - when prtInLs6TandemMode=tandemSlave |
| 1.3.6.1.4.1.164.3.2.3.2.13.3.1.8 | ColumnprtInLs6LinkTo | read-write | deprecated | It indicates the slot of the main link card to which the Ls6 card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - when… |
| 1.3.6.1.4.1.164.3.2.3.2.14 | NodeprtVc3Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.14.1 | TableprtExVc3CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1 | RowprtExVc3CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.1 | ColumnprtExVc3CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.2 | ColumnprtExVc3SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.3 | ColumnprtExVc3PrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.4 | ColumnprtExVc3Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.5 | ColumnprtExVc3TransGain | read-write | current | Transmit gain in dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.6 | ColumnprtExVc3ReceiveGain | read-write | current | Receive gain in dBm. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.7 | ColumnprtExVc3Wire | read-write | current | This object is equal for all the ports in the specific card because of HW limitations |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.8 | ColumnprtExVc3Rate | read-write | current | Rate in bps. |
| 1.3.6.1.4.1.164.3.2.3.2.14.1.1.9 | ColumnprtExVc3EchoCanceler | read-write | current | Echo canceler activation. The value will be the same for all the card's external ports. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2 | TableprtInVc3CnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1 | RowprtInVc3CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.1 | ColumnprtInVc3CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.2 | ColumnprtInVc3SltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.3 | ColumnprtInVc3PrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.4 | ColumnprtInVc3Connect | read-write | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.5 | ColumnprtInVc3Rate | read-write | current | Rate in bps. |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.6 | ColumnprtInVc3Oos | read-write | current | This object is equal for all the ports in the specific card because of HW limitations |
| 1.3.6.1.4.1.164.3.2.3.2.14.2.1.7 | ColumnprtInVc3LinkTo | read-write | deprecated | This attribute indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. STATUS deprecate… |
| 1.3.6.1.4.1.164.3.2.3.2.15 | NodeprtVcPbxCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.15.1 | TableprtExVcPbxCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1 | RowprtExVcPbxCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.1 | ColumnprtExVcPbxCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.2 | ColumnprtExVcPbxSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.3 | ColumnprtExVcPbxPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.4 | ColumnprtExVcPbxConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.5 | ColumnprtExVcPbxGroup | read-only | current | The group object links together several VC-PBX cards, concerning compression of the same input T1/E1 link time-slots. When ports of different slots have the sa… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.6 | ColumnprtExVcPbxTransparent | read-write | current | This object indicates whether the Transparent transfer of Time-Slots is required or not. Time-Slots transferred by Transparent, will not be compressed. no - ap… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.7 | ColumnprtExVcPbxTransSignalTs | read-write | current | This object specifies the ML Time-Slot dedicated to the signaling of the PABX Transparent TSs. None = 255. When prtExVcPbxTransparent=no this object's value=No… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.8 | ColumnprtExVcPbxFrame | read-write | current | This object is the frame parameter for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 values for the V… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.9 | ColumnprtExVcPbxRestoreTime | read-write | current | The time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and … |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.10 | ColumnprtExVcPbxLineCode | read-write | current | This object is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line co… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.11 | ColumnprtExVcPbxLineLength | read-write | current | This object is the line length parameter. It is applicable only for the VC-PBX/T1 card. notApplicable - for the VC-PBX and VC-PBX/E1 card. lenXXXpXXXft = len-X… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.12 | ColumnprtExVcPbxLinkTo | read-write | deprecated | This object indicates the slot of the ML card to which the VC-PBX/T1, VC-PBX/E1 card Transparent TSs are mapped. notApplicable - for VC-PBX card AND for VC-PBX… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.13 | ColumnprtExVcPbxSignalOper | read-write | current | This object indicates the Signaling Operation of the VC-PBX/T1, VC-PBX/E1 external port. notApplicable - for VC-PBX card normal - all 4 signaling bits are tran… |
| 1.3.6.1.4.1.164.3.2.3.2.15.1.1.14 | ColumnprtExVcPbxIdleCode | read-write | current | Determines the code for transmission in empty time slots. notApplicable - for VC-PBX card . |
| 1.3.6.1.4.1.164.3.2.3.2.15.2 | TableprtIn1p6VcPbxCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1 | RowprtIn1p6VcPbxCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.1 | ColumnprtIn1p6VcPbxCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.2 | ColumnprtIn1p6VcPbxSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.3 | ColumnprtIn1p6VcPbxPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.4 | ColumnprtIn1p6VcPbxConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.5 | ColumnprtIn1p6VcPbxRate | read-write | current | This object indicates the port Rate. For Normal mode (prtIn7p8VcPbxMode=normal), only part of the values are valid (constant rate). For Server mode (prtIn7p8Vc… |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.6 | ColumnprtIn1p6VcPbxEchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.15.2.1.7 | ColumnprtIn1p6VcPbxPabxTs | read-only | current | This object defines the PABX Time-Slot assigned to this internal port. For a T1 link, the valid values are: 1 .. 24. For an E1 link, the valid values are: 1 ..… |
| 1.3.6.1.4.1.164.3.2.3.2.15.3 | TableprtIn7p8VcPbxCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1 | RowprtIn7p8VcPbxCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.1 | ColumnprtIn7p8VcPbxCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.2 | ColumnprtIn7p8VcPbxSltIdx | read-only | current | This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.3 | ColumnprtIn7p8VcPbxPrtIdx | read-only | current | A unique identifier of the port, within the card. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.4 | ColumnprtIn7p8VcPbxConnect | read-write | current | This object indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.5 | ColumnprtIn7p8VcPbxMode | read-write | current | This object indicates the working mode of the port: - normal - the compressed voice will be sent to an MTML card inside the Mux. - server - the compressed voic… |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.6 | ColumnprtIn7p8VcPbxRate | read-write | current | This object indicates the port Main Rate. For Server mode (prtIn7p8VcPbxMode=server), the value will be notApplicable. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.7 | ColumnprtIn7p8VcPbxSignalMode | read-write | current | This object indicates the Signal Mode. For Server mode (prtIn7p8VcPbxMode=server), the only valid values are: - none - aBit |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.8 | ColumnprtIn7p8VcPbxOos | read-write | current | Out of service Signaling mode. |
| 1.3.6.1.4.1.164.3.2.3.2.15.3.1.9 | ColumnprtIn7p8VcPbxLinkTo | read-write | deprecated | This object indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For Server mode (pr… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4 | TableprtExVcPbxTsTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1 | RowprtExVcPbxTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.1 | ColumnprtExVcPbxTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.2 | ColumnprtExVcPbxTsSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.3 | ColumnprtExVcPbxTsPrtIdx | read-only | current | This attribute indicates a unique port number. VCPBX/E1, VCPBX/T1, VFPBX/E1, VFPBX/T1, VF-24/T1 and VF-30 cards have only one external interface. VF-48/T1 and … |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.4 | ColumnprtExVcPbxTsIdx | read-only | current | This attribute indicates a unique PABX time slot position. The valid time slots are 1..24 for T1 cards and 1..31 for E1 cards. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.5 | ColumnprtExVcPbxTsMode | read-write | current | This attribute indicates the usage, process and way of the specific PABX TS towards its destination: unused - the TS is not used (no processing, no destination… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.6 | ColumnprtExVcPbxTsIConSlot | read-write | current | For VF-PBX cards, the io1..io12 values are applicable only when prtExVcPbxTsMode=compressed. Otherwise, its value should be noConnect. For VF-24/30/48/60 cards… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.7 | ColumnprtExVcPbxTsIConPrt | read-write | current | This attribute indicates the port to which this TS is connected. For VF-PBX cards, only inPrt1..inPrt6 ports are valid. For VF-24/30/48/60 cards: - for prtExVc… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.8 | ColumnprtExVcPbxTsIConTs | read-write | current | This attribute indicates the ML TS to which this TS is connected. This object is not applicable for VF-PBX cards. For VF-24/30/48/60 cards it is applicable onl… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.9 | ColumnprtExVcPbxTsRemPrt | read-write | current | This attribute indicates the end-point port on the Remote unit. VF-24/T1 and VF-30/E1 cards have one external interface. VF-48/T1 and VF-60/E1 cards have two e… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.10 | ColumnprtExVcPbxTsRemTs | read-write | current | This attribute indicates the end-point TS on the Remote unit. The valid time slots are 1..24 for T1 ports and 1..31 for E1 ports. notApplicable - 255. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.11 | ColumnprtExVcPbxTsRemConnID | read-write | current | This attribute indicates the Connection ID with the Remote unit. notApplicable = 0. |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.12 | ColumnprtExVcPbxTsSourceSlot | read-write | current | For VFS cards. These cards offer Compresed Voice Services for Analog Voice ports of the MP. This object indicates the Source Slot of the Analog Voice port we w… |
| 1.3.6.1.4.1.164.3.2.3.2.15.4.1.13 | ColumnprtExVcPbxTsSourcePrt | read-write | current | For VFS cards. These cards offer Compresed Voice Services for Analog Voice ports of the MP. This object indicates the Source Port within the Slot of the Analog… |
| 1.3.6.1.4.1.164.3.2.3.2.16 | NodeprtIsdnCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.16.1 | TableprtIsdnCnfgTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1 | RowprtIsdnCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.1 | ColumnprtIsdnCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.2 | ColumnprtIsdnSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid ent… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.3 | ColumnprtIsdnPrtIdx | read-only | current | This attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calcul… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.4 | ColumnprtIsdnConnect | read-write | current | This attribute indicates if the port is connected. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.5 | ColumnprtIsdnSignalingProtocol | read-write | current | This attribute fixes which signaling protocol is used at this port (D-Channel). It is equivalent to isdnSignalingProtocol in the isdn MIB. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.6 | ColumnprtIsdnBasicRateLineTopology | read-write | current | This attribute is relevant for ISDN BRI only. It is equivalent to isdnBasicRateLineTopology in the isdn MIB. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.7 | ColumnprtIsdnMode | read-write | current | This attribute allows the user to configure the port as leased(2) in case of connection to a TDM network. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.8 | ColumnprtIsdnFilter | read-write | current | This attribute allows the user to configure the port: answerAll(2): accept all incoming calls, rejectAll(3): reject all incoming calls, selective(4): accept or… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.9 | ColumnprtIsdnSimultaneousCall | read-write | current | In case of simultaneous call (local,remote and remote,local): accept(2): accept the incoming call, reject(3): reject the incoming call. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.10 | ColumnprtIsdnNumOfAbstractTerm | read-write | current | An object for KM2100/4 agents. 255=Not Applicable When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable) else If ML speed is 64Kbp… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.11 | ColumnprtIsdnSwitchMode | read-write | current | For KM2100. auto - The call is initiated automatically by one of the IO cards connected to KML.10(ISDN card) having ISDN Switch Mode. manual - The call is init… |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.12 | ColumnprtIsdnAbSide | read-write | current | This parameter indicates the QSIG side in layer 3. This definition is from the QSIG Standard. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.13 | ColumnprtIsdnQsigRole | read-write | current | This parameter indicates the QSIG side in layer 1 & 2. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.14 | ColumnprtIsdnInterface | read-write | current | It indicates the interface type: lt = line termination nt = network termination te = terminal equipment. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.15 | ColumnprtIsdnCallMode | read-write | current | This object indicates the acceptance of incoming calls. Initiate - Callout Listen - Callin. |
| 1.3.6.1.4.1.164.3.2.3.2.16.1.1.16 | ColumnprtIsdnCallBackTimeout | read-write | current | This object is applicable only if 'prtIsdnFilter' is 'CallBack' and determines how long to wait from receiving the incoming call until initiating the call back… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2 | TableprtIsdnEndpointTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1 | RowprtIsdnEndpointEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.1 | ColumnprtIsdnEndpointCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.2 | ColumnprtIsdnEndpointSltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.3 | ColumnprtIsdnEndpointPrtIdx | read-only | current | This attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calcul… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.4 | ColumnprtIsdnEndpointIdx | read-only | current | Since more than one endpoint may be defined per isdn entity, this field is a simple index. It corresponds to isdnEndpointIdx in the isdn MIB. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.5 | ColumnprtIsdnEndpointTeiType | read-create | current | The type of TEI (Terminal Endpoint Identifier) used for this Terminal Endpoint. In case of dynamic(1), the TEI value is selected by the switch. In case of stat… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.6 | ColumnprtIsdnEndpointTeiValue | read-create | current | When the TEI Type is static, the value of the TEI should be between 0 and 63. Else, it is not selectable by user. 255 = notApplicable. It corresponds to isdnEn… |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.7 | ColumnprtIsdnEndpointSpid | read-create | current | The Service profile IDentifier (SPID) information for this Terminal Endpoint. It is is composed of 9-20 numeric characters. It corresponds to isdnEndpointSpid … |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.8 | ColumnprtIsdnEndpointBearerCh | read-create | current | This is the selected dialing channel. anyChannel - the system selects the dialing channel. |
| 1.3.6.1.4.1.164.3.2.3.2.16.2.1.9 | ColumnprtIsdnEndpointRowStatus | read-create | current | This field indicates whether to consider this endpoint or not. The only possible supported RowStatus vaules are active (1) and destroy (6). |
| 1.3.6.1.4.1.164.3.2.3.2.16.3 | TableprtIsdnDirectoryTable | not-accessible | current | The write operation into the table objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1 | RowprtIsdnDirectoryEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.1 | ColumnprtIsdnDirectoryCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.2 | ColumnprtIsdnDirectorySltIdx | read-only | current | This attribute indicates a unique slot position where the card is inserted. For MX300/30 ports: io1(5) = isdn1(5) and io2(6) = isdn2(6). In ?004 Unit the entri… |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.3 | ColumnprtIsdnDirectoryPrtIdx | read-only | current | For MAXcess this is the internal port number: 101, 102,.... For KM-2100 the port index is calculated as follows: 100*Slot+Ch |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.4 | ColumnprtIsdnDirectoryLocalAddr | read-create | current | This is the local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.5 | ColumnprtIsdnDirectoryLocalSubAddr | read-create | current | This is the local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.6 | ColumnprtIsdnDirectoryRemoteAddr | read-create | current | This is the remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.7 | ColumnprtIsdnDirectoryRemoteSubAddr | read-create | current | This is the remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.8 | ColumnprtIsdnDirectoryPrtNu | read-create | current | This is the external port number connected to this entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.9 | ColumnprtIsdnDirectoryTeiId | read-create | current | This is the abstract terminal id if relevant, connected to this entry. |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.10 | ColumnprtIsdnDirectoryRowStatus | read-create | current | This is the status for the row. It allows to know whether to consider this row or not. The only possible supported RowStatus vaules are active (1) and destroy … |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.11 | ColumnprtIsdnDirectoryLocalAddr2 | read-create | current | This is the second local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.12 | ColumnprtIsdnDirectoryLocalSubAddr2 | read-create | current | This is the second local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.13 | ColumnprtIsdnDirectoryRemoteAddr2 | read-create | current | This is the second remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank(20 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.16.3.1.14 | ColumnprtIsdnDirectoryRemoteSubAddr2 | read-create | current | This is the second remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters) |
| 1.3.6.1.4.1.164.3.2.3.2.17 | NodeprtLogicalCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.17.1 | TableprtLogicalCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1 | RowprtLogicalCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.1 | ColumnprtLogicalCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.2 | ColumnprtLogicalSltIdx | read-only | current | Slot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.3 | ColumnprtLogicalPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be an internal port number: inPrt1(101)->inPrt50(150), linkSel1(200)->linkSel50(250), en… |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.4 | ColumnprtLogicalConnect | read-create | current | This attribute indicates whether the port should be considered in any of the mux algorithms. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.5 | ColumnprtLogicalFunction | read-create | current | This parameter defines the function of the relevant channel. |
| 1.3.6.1.4.1.164.3.2.3.2.17.1.1.6 | ColumnprtLogicalRowStatus | read-create | current | This parameter allows the NMS to create/delete logical ports. The only possible supported RowStatus vaules are active (1) and destroy (6). |
| 1.3.6.1.4.1.164.3.2.3.2.17.2 | TablelinkSelectorCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1 | RowlinkSelectorCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.1 | ColumnlinkSelectorCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.2 | ColumnlinkSelectorSltIdx | read-only | current | Slot Index |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.3 | ColumnlinkSelectorPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be internal port number: higher or equal to linkSeL1(201). |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.4 | ColumnlinkSelectorMaxIdleTime | read-write | current | Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=move immediately to higher prioritized connected link.… |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.5 | ColumnlinkSelectorMode | read-write | current | If the link selector is in mode: backup(2)=then the link with the lower priority will be used in case of failure of the higher priority link, bod(3)=bandwidth … |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.6 | ColumnlinkSelectorRevert | read-write | current | If the link selector is in mode backup: auto(2)=return automatically to Main link when it is OK. manual(3)=stays connected to backup link. |
| 1.3.6.1.4.1.164.3.2.3.2.17.2.1.7 | ColumnlinkSelectorMinBUSession | read-write | current | Minimum duration of a backup session before returning to Main Link. Relevant in Backup Mode and when Revert is auto(2). Value 255 is for NEVER which means neve… |
| 1.3.6.1.4.1.164.3.2.3.2.17.3 | TablelinkSelectorPLinkTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1 | RowlinkSelectorPLinkEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.1 | ColumnpLinkCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.2 | ColumnpLinkSltIdx | read-only | current | Slot Index |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.3 | ColumnpLinkPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be the link selector number. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.4 | ColumnpLinkIdx | read-only | current | This index is the row number. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.5 | ColumnpLinkSlotNu | read-write | current | The slot of the prioritized link. For ISDN BRI ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.6 | ColumnpLinkPortNu | read-write | current | The port of the prioritized link. Value 100 is for noConnect. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.7 | ColumnpLinkPrioNu | read-write | current | The priority of the prioritized link. MIN=1...., MAX=8. |
| 1.3.6.1.4.1.164.3.2.3.2.17.3.1.8 | ColumnpLinkVRate | read-write | current | The rate to use with this link. |
| 1.3.6.1.4.1.164.3.2.3.2.18 | NodeprtFrPlusCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.18.1 | TableprtFrPlusCnfgTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1 | RowprtFrPlusCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.1 | ColumnprtFrPlusCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.2 | ColumnprtFrPlusSltIdx | read-only | current | Slot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6). |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.3 | ColumnprtFrPlusPrtIdx | read-only | current | This attribute indicates a unique port number. This port number should be: - for ISDN cards: inPrt1(101)->inPrt50(150) - for MHS1 card : exPrt1(1) - for MHS3, … |
| 1.3.6.1.4.1.164.3.2.3.2.18.1.1.4 | ColumnprtFrPlusNotSegmentedPriorities | read-write | current | This parameter is relevant only for FR+ protocol and asks the MXcess NOT to segment data with specified priorities: from LSB: bit 1 is for priority 1, bit 2 is… |
| 1.3.6.1.4.1.164.3.2.3.2.19 | NodeprtMl4Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.19.1 | TableprtMl4CnfgTable | not-accessible | current | This is an extension table for MTML-4 card parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1 | RowprtMl4CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.1 | ColumnprtMl4CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.2 | ColumnprtMl4SltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.3 | ColumnprtMl4PrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.4 | ColumnprtMl4SigProfile | read-write | current | This object indicates the Signaling Profile of the port. none - when the Frame is G732N (no MF) or Unframed. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = … |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 | ColumnprtMl4CGA | read-write | current | This object selects the method used to signal the CGA state to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.6 | ColumnprtMl4Oos | read-write | current | 'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service … |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.7 | ColumnprtMl4VoiceOos | read-write | current | Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.8 | ColumnprtMl4DataOos | read-write | current | Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.9 | ColumnprtMl4Service | read-write | current | Link Service. leasedLine - usual TDM interface. v51 - V5.1 interface. v52Master - V5.2 Link to Local Exchange. v52Slave - a ML that is transferred to the v52Ma… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.10 | ColumnprtMl4IpAddress | read-write | current | IP Address of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.11 | ColumnprtMl4IpMask | read-write | current | IP subnet mask of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.12 | ColumnprtMl4SignalingMode | read-write | current | Refers to the signaling mode of the port (or framer module). notApplicable(1)- means that no framer is needed for this port (no signaling), or that this object… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.13 | ColumnprtMl4EchoCanceler | read-write | current | Echo canceler activation. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.14 | ColumnprtMl4OosErrorSource | read-write | current | OOS (Out-of-Service) Error Source. This object is applicable for T1 ports only. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.15 | ColumnprtMl4OosEntryThreshold | read-write | current | This object defines the number of Errors per Second that determine the minimum unacceptable noise level. This value will be the Entry Threshold to the OOS (Out… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.16 | ColumnprtMl4OosExitThreshold | read-write | current | This object defines the number of consecutive Error-Free-Seconds before going from OOS state to Normal state. This value will be the Exit Threshold from the OO… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.17 | ColumnprtMl4LogicalLinkId | read-write | current | This object defines for a V5.2 Master ML the Logical Link Id. Valid values are: 0..256. NA=257. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.18 | ColumnprtMl4DedicatedTs | read-write | current | A unique number to identify Dedicated TS of the E1 port (V5.2). It is applicable only when prtMl4Service=v52Slave and prtExPh1MlInbandMng selected is dedicated… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.19 | ColumnprtMl4RemCrc | read-write | current | This object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not. |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.20 | ColumnprtMl4CrossConnectLevel | read-write | current | This object indicates whether the cross connect is on DS1 or DS0 (time-slots) level. When cross connect level is ds1, Destination Slot is indicated by prtGenCn… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.21 | ColumnprtMl4PppEchoFailDetection | read-write | current | This object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated T… |
| 1.3.6.1.4.1.164.3.2.3.2.19.1.1.22 | ColumnprtMl4EcanCasControl | read-write | current | This object enables/disables ECAN (Echo Canceller) control activation/deactivation sent via the A, B, C, D multiframe signaling BITs. |
| 1.3.6.1.4.1.164.3.2.3.2.20 | NodeprtAcmCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.20.1 | TableprtAcmCnfgTable | not-accessible | current | This is a table for ACM port parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1 | RowprtAcmCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.1 | ColumnprtAcmCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.2 | ColumnprtAcmSltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.3 | ColumnprtAcmPrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.4 | ColumnprtAcmConnect | read-write | current | This attribute indicates whether the port should be connected or not. Only a connected port can perform activity. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.5 | ColumnprtAcmActiveState | read-write | current | This attribute indicates the Electric Active State of the port. |
| 1.3.6.1.4.1.164.3.2.3.2.20.1.1.6 | ColumnprtAcmAlrString | read-write | current | Alarm string selected by user for the Inbound ports. This object is applicable only for the Inbound Ports: ext-5..ext-12. For the Outbound Ports (ext-1..ext-4)… |
| 1.3.6.1.4.1.164.3.2.3.2.21 | NodeprtE2Cnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.21.1 | TableprtE2CnfgTable | not-accessible | current | This is a table for E2 port parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1 | RowprtE2CnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.1 | ColumnprtE2CnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.2 | ColumnprtE2SltIdx | read-only | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.3 | ColumnprtE2PrtIdx | read-only | current | This attribute indicates a unique port number. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.4 | ColumnprtE2Connect | read-write | current | This attribute indicates whether the port should be connected or not. Only a connected port can perform activity. |
| 1.3.6.1.4.1.164.3.2.3.2.21.1.1.5 | ColumnprtE2MngOnNationalBit | read-write | current | This attribute indicates whether National Bit will be used for Management or not. |
| 1.3.6.1.4.1.164.3.2.3.2.22 | NodeprtLanWanCnfg | |||
| 1.3.6.1.4.1.164.3.2.3.2.22.1 | TableprtLanWanCnfgTable | not-accessible | current | This is a table for Lan-Wan port parameters. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1 | RowprtLanWanCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.1 | ColumnprtLanWanCnfgIdx | not-accessible | current | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.2 | ColumnprtLanWanSltIdx | not-accessible | current | This object indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.3 | ColumnprtLanWanPrtIdx | not-accessible | current | This object indicates a unique number to identify a port in a specific card. Generally, for MP-210X/2200, the Port Index will be according to the external/inte… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.4 | ColumnprtLanWanMode | read-write | current | This object determines the working mode of this port. For FCD155, layer3SubnetSwitch is not applicable |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.5 | ColumnprtLanWanDestIf | read-write | current | This object determines the Destination Interface for the frames received by this port. - Switching Table = 100 (it means that the destination interface will be… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.6 | ColumnprtLanWanEgressVlanMode | read-write | current | This object determines what to do with the VLAN frames that exit via the WAN side of the port. This object is not applicable when prtLanWanMode=l3SubnetSwitch(… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.7 | ColumnprtLanWanL2Protocol | read-write | current | L2 Protocol. When prtLanWanMode=l3SubnetSwitch(4), the only valid value is ppp(3). |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.8 | ColumnprtLanWanStpPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.9 | ColumnprtLanWanStpCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.10 | ColumnprtLanWanToLanVlanMode | read-write | current | This object determines what to do with the VLAN frames that come from WAN side of the port and exit towards one of the LAN ports. This object is applicable onl… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.11 | ColumnprtLanWanVlanId | read-write | current | This is the VLAN Id attached to a frame, when the relevant Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. 0=not applicable. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.12 | ColumnprtLanWanVlanPriority | read-write | current | This is the VLAN Priority attached to a frame, when the relevant Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. Valid value… |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.13 | ColumnprtLanWanMtu | read-write | current | The size of the largest packet which can be sent/received on the interface, specified in octets. Valid values change per device. 0=not applicable. |
| 1.3.6.1.4.1.164.3.2.3.2.22.1.1.14 | ColumnprtLanWanVlanType | read-write | current | This oject indicates type of VLAN this port is assigned to. Port Base Vlan parameters are defined by objects under radBridgePortBaseVlan |