RAD-Protection-MIB
48 objects
Protection MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.72 | IdentityagnProtection | Protection MIB. | ||
| 1.3.6.1.4.1.164.6.2.72.0 | IdentityprotectionEvents | current | The events for RAD protection. | |
| 1.3.6.1.4.1.164.6.2.72.0.3 | NotificationepsConfigurationMismatch | deprecated | EPS configuration mismatch. | |
| 1.3.6.1.4.1.164.6.2.72.0.5 | NotificationetpEpsPortSwitchover | current | EPS configuration mismatch. | |
| 1.3.6.1.4.1.164.6.2.72.1 | TableprotectGroupTable | not-accessible | current | This object defines the protection group table. |
| 1.3.6.1.4.1.164.6.2.72.1.1 | RowprotectGroupEntry | not-accessible | current | This is an entry of the protectGroupTable. |
| 1.3.6.1.4.1.164.6.2.72.1.1.1 | ColumnprotectGroupClass | not-accessible | current | This index defines protection group type. |
| 1.3.6.1.4.1.164.6.2.72.1.1.2 | ColumnprotectGroupIdx | not-accessible | current | This index defines the protection group number. |
| 1.3.6.1.4.1.164.6.2.72.1.1.3 | ColumnprotectGroupRowStatus | read-create | current | Table row status. It is based on the standard RowStatus definition of RFC2579. |
| 1.3.6.1.4.1.164.6.2.72.1.1.4 | ColumnprotectGroupName | read-create | current | This object defines the protection group name. |
| 1.3.6.1.4.1.164.6.2.72.1.1.5 | ColumnprotectGroupMode | read-create | current | This object defines mode of protection that the group uses. TDM PW protection uses 2 modes: 1. Independent - PW endpoint nodes independently select which PW th… |
| 1.3.6.1.4.1.164.6.2.72.1.1.6 | ColumnprotectGroupRevertMode | read-create | current | The revertive mode of the specific protection group type. nonRevertive Traffic remains on the protection until another switch request is received. revertive Wh… |
| 1.3.6.1.4.1.164.6.2.72.1.1.7 | ColumnprotectGroupWaitToRestore | read-create | current | This object defines traffic recovery time (in seconds) to the entry after its recovery. |
| 1.3.6.1.4.1.164.6.2.72.1.1.8 | ColumnprotectGroupCmd | read-create | current | This object defines commands that the protection group should perform. The object should be created with 'none' value by default. After a specific set command … |
| 1.3.6.1.4.1.164.6.2.72.1.1.9 | ColumnprotectGroupLastCmd | read-only | current | This object contains the last command that the protection group was requested to perform. See description on protectGroupCmd object. |
| 1.3.6.1.4.1.164.6.2.72.1.1.10 | ColumnprotectGroupLastSwitchTime | read-only | current | This object specifies the last protection switch date and time. The object is read-only and should be updated by the agent on each occurence of a protection sw… |
| 1.3.6.1.4.1.164.6.2.72.1.1.11 | ColumnprotectGroupLastSwitchReason | read-only | current | This object specifies the last protection switch reason. Agent should update the object upon each protection switch. |
| 1.3.6.1.4.1.164.6.2.72.1.1.12 | ColumnprotectGroupSwitchReason | read-only | current | Reason of the EPS protection configuration mismatch. |
| 1.3.6.1.4.1.164.6.2.72.1.1.13 | ColumnprotectGroupDownDuration | read-create | current | This objects defines the duration time in seconds upon flip. |
| 1.3.6.1.4.1.164.6.2.72.2 | TableprotectMemberTable | not-accessible | current | The table defines members associated with certain protection group. It uses the same indices as protectGroupTable and an additional per member index. |
| 1.3.6.1.4.1.164.6.2.72.2.1 | RowprotectMemberEntry | not-accessible | current | This is an entry of the protectMemberEntry. |
| 1.3.6.1.4.1.164.6.2.72.2.1.1 | ColumnprotectMemberNumber | not-accessible | current | Number of protection member in the protection group. In the revertive mode this object defines Protection and Working functionality: 0 - Protection 1 or higher… |
| 1.3.6.1.4.1.164.6.2.72.2.1.2 | ColumnprotectMemberRowStatus | read-create | current | This object enables creation and deletion of entries in the protectMemberEntry and handling the row status according to RFC2579. |
| 1.3.6.1.4.1.164.6.2.72.2.1.3 | ColumnprotectMemberId | read-create | current | This object indicates the logical or physical entity of the protection group member.This object may be used as the entity's ifIndex. |
| 1.3.6.1.4.1.164.6.2.72.2.1.4 | ColumnprotectMemberState | read-only | current | This object indicates the state of the protection member. |
| 1.3.6.1.4.1.164.6.2.72.2.1.5 | ColumnprotectMemberIsProtected | read-only | current | This object contains 'yes' value when it is actually protected and 'no' if it isn't. Activate of the protection if required is possible when the primary object… |
| 1.3.6.1.4.1.164.6.2.72.3 | TableprotectInverseMapTable | not-accessible | current | This table contains objects of protectGroupTable and protectMemberTable. The purpose of this table is to obtain the protection Group and protection member info… |
| 1.3.6.1.4.1.164.6.2.72.3.1 | RowprotectInverseMapEntry | not-accessible | current | This object defines an entry of the protectInverseMapTable. |
| 1.3.6.1.4.1.164.6.2.72.3.1.1 | ColumnprotectInverseMapGroupClass | not-accessible | current | This object defines protection group type as an index of the protectInverseMapTable. It should be equal to protectGroupClass of ProtectGroupEntry. |
| 1.3.6.1.4.1.164.6.2.72.3.1.2 | ColumnprotectInverseMapMemberId | not-accessible | current | This object defines index of the protectInverseMapTable. The protectInverseMapMemberId should be equal to protectMemberId of ProtectMemberEntry. |
| 1.3.6.1.4.1.164.6.2.72.3.1.3 | ColumnprotectInverseMapGroupIdx | read-only | current | This object defines protection group index within protectInverseMapTable. It should be equal to protectGroupIdx of ProtectGroupEntry. |
| 1.3.6.1.4.1.164.6.2.72.3.1.4 | ColumnprotectInverseMapMemberNumber | read-only | current | This object defines Member Number of the protection Group within the protectInverseMapTable. It should be equal to protectMemberNumber of ProtectMemberEntry. |
| 1.3.6.1.4.1.164.6.2.72.4 | TableprotectEpsGroupTable | not-accessible | current | This table defines Ethernet Protection Switching (G.8031) specific configuration parameters. The table augments the Protection Group configuration. |
| 1.3.6.1.4.1.164.6.2.72.4.1 | RowprotectEpsGroupEntry | not-accessible | current | This object defines an augmentation of the Protection Group table for EPS. |
| 1.3.6.1.4.1.164.6.2.72.4.1.1 | ColumnprotectEpsGroupUseAps | read-create | current | This object defines whether APS protocol is used for EPS protection. |
| 1.3.6.1.4.1.164.6.2.72.4.1.2 | ColumnprotectEpsGroupMaster | read-create | current | This object determines Master-Slave configuration of the EPS protection groups. Each group may play Master Group or Slave Group role. Activation of the EPS pro… |
| 1.3.6.1.4.1.164.6.2.72.4.1.3 | ColumnprotectEpsGroupSwitchDirection | read-create | current | This object specifies Protection group switch direction policy. With bidirectional switching, an attempt is made to coordinate the two directions, even for a u… |
| 1.3.6.1.4.1.164.6.2.72.5 | TableprotectEpsMemberTable | not-accessible | current | This table adds Ethernet Protection Switching (G.8031) definition to the Protection Member table. |
| 1.3.6.1.4.1.164.6.2.72.5.1 | RowprotectEpsMemberEntry | not-accessible | current | This object defines a protectMemberEntry augmentation defining set of G.8031 using the protection OAM CFM codes. |
| 1.3.6.1.4.1.164.6.2.72.5.1.1 | ColumnprotectEpsOamCfmMdId | read-create | current | This object defines MD ID code (Maintenance Domain ID) of G.8031 protection according to OAM CFM definitions. |
| 1.3.6.1.4.1.164.6.2.72.5.1.2 | ColumnprotectEpsOamCfmMaId | read-create | current | This object defines MA ID code (Maintenance Association ID) of G.8031 protection according to OAM CFM definitions. |
| 1.3.6.1.4.1.164.6.2.72.5.1.3 | ColumnprotectEpsOamCfmMepId | read-create | current | This object defines MEP ID code (Maintenance End Point ID) of G.8031 protection according to OAM CFM definitions. |
| 1.3.6.1.4.1.164.6.2.72.5.1.4 | ColumnprotectEpsIfIndex | read-create | current | This object defines the operational status of the port as the trigger for the protection (instead of the MEP). |
| 1.3.6.1.4.1.164.6.2.72.6 | TableprotectEpsMasterMapTable | not-accessible | current | This table depicts bounding between EPS Protection groups. Each Master group should be bound with at least one Slave group. The table should not include groups… |
| 1.3.6.1.4.1.164.6.2.72.6.1 | RowprotectEpsMasterMapEntry | not-accessible | current | This object defines an entry of the protectEpsMasterMapTable. It defines the bounding between Master Groups and their respective Slave Groups. |
| 1.3.6.1.4.1.164.6.2.72.6.1.1 | ColumnprotectEpsMasterMapMasterIdx | not-accessible | current | This index defines the EPS Master group. It is equal to the protectGroupIdx of the EPS Master group. |
| 1.3.6.1.4.1.164.6.2.72.6.1.2 | ColumnprotectEpsMasterMapSlaveIdx | not-accessible | current | This index defines the EPS Slave group that is bound with the Master group that is defined by protectEpsMasterMapMasterIdx. It is equal to the protectGroupIdx … |
| 1.3.6.1.4.1.164.6.2.72.6.1.3 | ColumnprotectEpsMasterMapParam | read-only | current | This is a dummy object. |