RADLAN-QOS-CLI-MIB
252 objects
The private MIB module definition for Quality Of Service CLI
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| RADLAN-MIB | Percents rnd |
| RADLAN-SNMPv2 | RowPointer RowStatus TruthValue zeroDotZero |
| SNMPv2-SMI | Counter32 Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.88 | IdentityrlQosCliMib | The private MIB module definition for Quality Of Service CLI | ||
| 1.3.6.1.4.1.89.88.1 | ScalarrlQosCliQosMode | read-write | current | This scalar define in which mode the system will work: basic , advance or none. |
| 1.3.6.1.4.1.89.88.2 | ScalarrlQosCliBasicModeCfg | read-write | current | This scalar define in which Basic mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none. |
| 1.3.6.1.4.1.89.88.3 | ScalarrlQosMaxNumOfAce | read-write | current | This scalar define in which Basic mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none. |
| 1.3.6.1.4.1.89.88.4 | TablerlQosOffsetTable | not-accessible | current | This table specifies Offset Table information |
| 1.3.6.1.4.1.89.88.4.1 | RowrlQosOffsetEntry | not-accessible | current | Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then th… |
| 1.3.6.1.4.1.89.88.4.1.1 | ColumnrlQosOffsetIndex | not-accessible | current | An arbitrary incremental Index for the offset table. |
| 1.3.6.1.4.1.89.88.4.1.2 | ColumnrlQosOffsetType | read-create | current | Start of the offset. |
| 1.3.6.1.4.1.89.88.4.1.3 | ColumnrlQosOffsetValue | read-create | current | The Offset value. |
| 1.3.6.1.4.1.89.88.4.1.4 | ColumnrlQosOffsetMask | read-create | current | Define which bit to be extracted from the offset. |
| 1.3.6.1.4.1.89.88.4.1.5 | ColumnrlQosOffsetPattern | read-create | current | The value to match too. |
| 1.3.6.1.4.1.89.88.4.1.6 | ColumnrlQosOffsetTuplePointer | read-create | current | Pointer for the relevant Tuple. |
| 1.3.6.1.4.1.89.88.4.1.7 | ColumnrlQosOffsetStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.5 | TablerlQosTupleTable | not-accessible | current | This table specifies Tuple Table information |
| 1.3.6.1.4.1.89.88.5.1 | RowrlQosTupleEntry | not-accessible | current | Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTup… |
| 1.3.6.1.4.1.89.88.5.1.1 | ColumnrlQosTupleIndex | not-accessible | current | An arbitrary incremental Index for the offset table. |
| 1.3.6.1.4.1.89.88.5.1.2 | ColumnrlQosTupleType | read-create | current | Start of the offset. |
| 1.3.6.1.4.1.89.88.5.1.3 | ColumnrlQosTupleValue1 | read-create | current | The Tuple no.1 value can be regular integer values only. |
| 1.3.6.1.4.1.89.88.5.1.4 | ColumnrlQosTupleValue2 | read-create | current | The Tuple no.2 value can be IP/MAC address or protocol number with mask |
| 1.3.6.1.4.1.89.88.5.1.5 | ColumnrlQosTupleStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.6 | TablerlQosAceTable | not-accessible | current | This table specifies ACE table information |
| 1.3.6.1.4.1.89.88.6.1 | RowrlQosAceEntry | not-accessible | current | Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential… |
| 1.3.6.1.4.1.89.88.6.1.1 | ColumnrlQosAceIndex | not-accessible | current | An arbitrary incremental Index for the ACE table. |
| 1.3.6.1.4.1.89.88.6.1.2 | ColumnrlQosAceAction | read-create | current | ACE Action to take. |
| 1.3.6.1.4.1.89.88.6.1.3 | ColumnrlQosAceType | read-create | current | ACE Type |
| 1.3.6.1.4.1.89.88.6.1.4 | ColumnrlQosAceTuple1 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.5 | ColumnrlQosAceTuple2 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.6 | ColumnrlQosAceTuple3 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.7 | ColumnrlQosAceTuple4 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.8 | ColumnrlQosAceTuple5 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.9 | ColumnrlQosAceTuple6 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.10 | ColumnrlQosAceTuple7 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.11 | ColumnrlQosAceTuple8 | read-create | current | ACE Tuple 1 pointer. |
| 1.3.6.1.4.1.89.88.6.1.12 | ColumnrlQosAceAccount | read-create | current | ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. For Broadcom ASICs this counter shows number of matche… |
| 1.3.6.1.4.1.89.88.6.1.13 | ColumnrlQosAceStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.7 | TablerlQosAclTable | not-accessible | current | This table specifies ACL table information |
| 1.3.6.1.4.1.89.88.7.1 | RowrlQosAclEntry | not-accessible | current | Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference ta… |
| 1.3.6.1.4.1.89.88.7.1.1 | ColumnrlQosAclIndex | not-accessible | current | An arbitrary incremental Index for the ACE table. |
| 1.3.6.1.4.1.89.88.7.1.2 | ColumnrlQosAclName | read-create | current | Name ACL. |
| 1.3.6.1.4.1.89.88.7.1.3 | ColumnrlQosAclType | read-create | current | ACL Type. |
| 1.3.6.1.4.1.89.88.7.1.4 | ColumnrlQosAclStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.8 | TablerlQosAclAceRefTable | not-accessible | current | This table specifies the ACE to ACL relationship. |
| 1.3.6.1.4.1.89.88.8.1 | RowrlQosAclAceRefEntry | not-accessible | current | Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAc… |
| 1.3.6.1.4.1.89.88.8.1.1 | ColumnrlQosAclAceRefAcePointer | not-accessible | current | The Index is the ACE pointer |
| 1.3.6.1.4.1.89.88.8.1.2 | ColumnrlQosAclAceRefAclPointer | read-create | current | ACL index Pointer |
| 1.3.6.1.4.1.89.88.8.1.3 | ColumnrlQosAclAceRefStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.9 | TablerlQosClassMapTable | not-accessible | current | This table specifies CCL table information |
| 1.3.6.1.4.1.89.88.9.1 | RowrlQosClassMapEntry | not-accessible | current | Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The ind… |
| 1.3.6.1.4.1.89.88.9.1.1 | ColumnrlQosClassMapIndex | not-accessible | current | Class Map Index |
| 1.3.6.1.4.1.89.88.9.1.2 | ColumnrlQosClassMapName | read-create | current | Name of the Class Map. |
| 1.3.6.1.4.1.89.88.9.1.3 | ColumnrlQosClassMapType | read-create | current | Class map type |
| 1.3.6.1.4.1.89.88.9.1.4 | ColumnrlQosClassMapAction | read-create | current | Class Map Action. |
| 1.3.6.1.4.1.89.88.9.1.5 | ColumnrlQosClassMapMarkValue | read-create | current | Mark value when mark action has been chosen in Class Map Action field. |
| 1.3.6.1.4.1.89.88.9.1.6 | ColumnrlQosClassMapPolicer | read-create | current | Policer pointer. 0-means no policer. |
| 1.3.6.1.4.1.89.88.9.1.7 | ColumnrlQosClassMapMatch1 | read-create | current | Match ACL 1 pointer. |
| 1.3.6.1.4.1.89.88.9.1.8 | ColumnrlQosClassMapMatch2 | read-create | current | Match ACL 2 pointer. |
| 1.3.6.1.4.1.89.88.9.1.9 | ColumnrlQosClassMapMarkVlan | read-create | current | If 'enabled', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. |
| 1.3.6.1.4.1.89.88.9.1.10 | ColumnrlQosClassMapNewVlan | read-create | current | If rlQosClassMapMarkVlan 'enabled', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id. |
| 1.3.6.1.4.1.89.88.9.1.11 | ColumnrlQosClassMapNewPort | read-create | current | If value not zero, than the classified traffic will be redirected to the new egress physical port. The value of this field sets new egress port. |
| 1.3.6.1.4.1.89.88.9.1.12 | ColumnrlQosClassMapCopyPort | read-create | current | If value not zero, than the classified traffic will be copied to the desination copy port. The value of this field sets desination copy port. |
| 1.3.6.1.4.1.89.88.9.1.13 | ColumnrlQosClassMapStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.10 | TablerlQosPolicerTable | not-accessible | current | This table specifies All the Policers in the system Information |
| 1.3.6.1.4.1.89.88.10.1 | RowrlQosPolicerEntry | not-accessible | current | Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. T… |
| 1.3.6.1.4.1.89.88.10.1.1 | ColumnrlQosPolicerIndex | not-accessible | current | Policer Index. |
| 1.3.6.1.4.1.89.88.10.1.2 | ColumnrlQosPolicerName | read-create | current | Name of the Policer. |
| 1.3.6.1.4.1.89.88.10.1.3 | ColumnrlQosPolicerType | read-create | current | Policer type |
| 1.3.6.1.4.1.89.88.10.1.4 | ColumnrlQosPolicerCir | read-create | current | Committed rate value. |
| 1.3.6.1.4.1.89.88.10.1.5 | ColumnrlQosPolicerCbs | read-create | current | Committed rate Value. |
| 1.3.6.1.4.1.89.88.10.1.6 | ColumnrlQosPolicerAction | read-create | current | Out of profile Action. |
| 1.3.6.1.4.1.89.88.10.1.7 | ColumnrlQosPolicerCasPointerRemVal | read-create | current | Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark |
| 1.3.6.1.4.1.89.88.10.1.8 | ColumnrlQosPolicerStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.11 | TablerlQosPolicyMapTable | not-accessible | current | This table specifies Policy Map Table Information |
| 1.3.6.1.4.1.89.88.11.1 | RowrlQosPolicyMapEntry | not-accessible | current | Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer r… |
| 1.3.6.1.4.1.89.88.11.1.1 | ColumnrlQosPolicyMapIndex | not-accessible | current | Policy map Index. |
| 1.3.6.1.4.1.89.88.11.1.2 | ColumnrlQosPolicyMapName | read-create | current | Policy map Name. |
| 1.3.6.1.4.1.89.88.11.1.3 | ColumnrlQosPolicyMapStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.12 | TablerlQosPolicyClassRefTable | not-accessible | current | This table specifies The relationship between policy map to class map |
| 1.3.6.1.4.1.89.88.12.1 | RowrlQosPolicyClassRefEntry | not-accessible | current | Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPol… |
| 1.3.6.1.4.1.89.88.12.1.1 | ColumnrlQosPolicyClassRefClassPointer | not-accessible | current | The Index is the Class-map pointer |
| 1.3.6.1.4.1.89.88.12.1.2 | ColumnrlQosPolicyClassRefPolicyPointer | read-create | current | Policy map index Pointer |
| 1.3.6.1.4.1.89.88.12.1.3 | ColumnrlQosPolicyClassRefStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.13 | TablerlQosIfPolicyTable | not-accessible | current | This table specifies for each interface the Policy Map attach to it |
| 1.3.6.1.4.1.89.88.13.1 | RowrlQosIfPolicyEntry | not-accessible | current | Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type r… |
| 1.3.6.1.4.1.89.88.13.1.1 | ColumnrlIfIndex | not-accessible | current | Interface Index. |
| 1.3.6.1.4.1.89.88.13.1.2 | ColumnrlIfType | not-accessible | current | Interface Type(vlan/port). |
| 1.3.6.1.4.1.89.88.13.1.3 | ColumnrlQosIfPolicyMapPointerIn | read-create | current | Policy map pointer Input. |
| 1.3.6.1.4.1.89.88.13.1.4 | ColumnrlQosIfPolicyMapPointerOut | read-create | current | Policy map pointer Output. |
| 1.3.6.1.4.1.89.88.13.1.5 | ColumnrlQosIfTrustActive | read-create | current | Interface Basic Mode Trust is active or not . |
| 1.3.6.1.4.1.89.88.13.1.6 | ColumnrlQosPortShaperStatus | read-create | current | If there is shaper on the port |
| 1.3.6.1.4.1.89.88.13.1.7 | ColumnrlQosCirPortShaper | read-create | current | The CIR for the port shaper. N/A when the shper is disabled |
| 1.3.6.1.4.1.89.88.13.1.8 | ColumnrlQosCbsPortShaper | read-create | current | The CBS for the port shaper. N/A when the shper is disabled |
| 1.3.6.1.4.1.89.88.13.1.9 | ColumnrlQosIfProfilePointer | read-create | current | Interface Profile name pointer. |
| 1.3.6.1.4.1.89.88.13.1.10 | ColumnrlQosQueueProfilePointer | read-create | current | Queue Profile name pointer. |
| 1.3.6.1.4.1.89.88.13.1.11 | ColumnrlQosQueueShapeProfilePointer | read-create | current | Queue shape Profile pointer. |
| 1.3.6.1.4.1.89.88.13.1.12 | ColumnrlQosAclDefaultAction | read-create | current | When one ACL is enterd then what to do for the last rull. |
| 1.3.6.1.4.1.89.88.13.1.13 | ColumnrlQosIfPolicyMapStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.13.1.14 | ColumnrlQosIfAclIn | read-create | current | Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied. |
| 1.3.6.1.4.1.89.88.13.1.15 | ColumnrlQosIfAclOut | read-create | current | Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied. |
| 1.3.6.1.4.1.89.88.13.1.16 | ColumnrlQosIfPolicerIn | read-create | current | Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied. |
| 1.3.6.1.4.1.89.88.14 | TablerlQosIfProfileCfgTable | not-accessible | current | This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters. |
| 1.3.6.1.4.1.89.88.14.1 | RowrlQosIfProfileCfgEntry | not-accessible | current | Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability facto… |
| 1.3.6.1.4.1.89.88.14.1.1 | ColumnrlIfProfileName | not-accessible | current | Interface Index. |
| 1.3.6.1.4.1.89.88.14.1.2 | ColumnrlQosQueueId | not-accessible | current | Queue id Index. |
| 1.3.6.1.4.1.89.88.14.1.3 | ColumnrlQosTdThersholdDp0 | read-create | current | Tail Drop Threshold for Drop Precedence 0. |
| 1.3.6.1.4.1.89.88.14.1.4 | ColumnrlQosTdThersholdDp1 | read-create | current | Tail Drop Threshold for Drop Precedence 1. |
| 1.3.6.1.4.1.89.88.14.1.5 | ColumnrlQosTdThersholdDp2 | read-create | current | Tail Drop Threshold for Drop Precedence 2. |
| 1.3.6.1.4.1.89.88.14.1.6 | ColumnrlQosRedMinDp0 | read-create | current | WRED Min Threshold for Drop Precedence 2. |
| 1.3.6.1.4.1.89.88.14.1.7 | ColumnrlQosRedMaxDp0 | read-create | current | WRED Max Threshold for Drop Precedence 0. |
| 1.3.6.1.4.1.89.88.14.1.8 | ColumnrlQosRedProbDp0 | read-create | current | WRED probability for Drop Precedence 0. |
| 1.3.6.1.4.1.89.88.14.1.9 | ColumnrlQosRedMinDp1 | read-create | current | WRED Min Threshold for Drop Precedence 2. |
| 1.3.6.1.4.1.89.88.14.1.10 | ColumnrlQosRedMaxDp1 | read-create | current | WRED Max Threshold for Drop Precedence 1. |
| 1.3.6.1.4.1.89.88.14.1.11 | ColumnrlQosRedProbDp1 | read-create | current | WRED probability for Drop Precedence 1. |
| 1.3.6.1.4.1.89.88.14.1.12 | ColumnrlQosRedMinDp2 | read-create | current | WRED Min Threshold for Drop Precedence 2. |
| 1.3.6.1.4.1.89.88.14.1.13 | ColumnrlQosRedMaxDp2 | read-create | current | WRED Max Threshold for Drop Precedence 2. |
| 1.3.6.1.4.1.89.88.14.1.14 | ColumnrlQosRedProbDp2 | read-create | current | WRED probability for Drop Precedence 2. |
| 1.3.6.1.4.1.89.88.14.1.15 | ColumnrlQosRedQweight | read-create | current | Q factor for WRED. |
| 1.3.6.1.4.1.89.88.14.1.16 | ColumnrlQosIfprofileStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.15 | TablerlQosDscpMutationTable | not-accessible | current | This table specifies The DSCP Mutation table |
| 1.3.6.1.4.1.89.88.15.1 | RowrlQosDscpMutationEntry | not-accessible | current | Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp |
| 1.3.6.1.4.1.89.88.15.1.1 | ColumnrlQosOldDscp | not-accessible | current | Old DSCP. |
| 1.3.6.1.4.1.89.88.15.1.2 | ColumnrlQosNewDscp | read-create | current | New DSCP. |
| 1.3.6.1.4.1.89.88.16 | TablerlQosDscpRemarkTable | not-accessible | current | This table specifies The DSCP Remark table |
| 1.3.6.1.4.1.89.88.16.1 | RowrlQosDscpRemarkEntry | not-accessible | current | Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp |
| 1.3.6.1.4.1.89.88.16.1.1 | ColumnrlQosRmOldDscp | not-accessible | current | Old DSCP. |
| 1.3.6.1.4.1.89.88.16.1.2 | ColumnrlQosRmNewDscp | read-create | current | New DSCP. |
| 1.3.6.1.4.1.89.88.17 | TablerlQosCosQueueTable | not-accessible | current | This table specifies The Cos to queue map table |
| 1.3.6.1.4.1.89.88.17.1 | RowrlQosCosQueueEntry | not-accessible | current | Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex |
| 1.3.6.1.4.1.89.88.17.1.1 | ColumnrlQosCosIndex | not-accessible | current | CoS value (0-7). |
| 1.3.6.1.4.1.89.88.17.1.2 | ColumnrlQosCosQueueId | read-create | current | Queue ID. |
| 1.3.6.1.4.1.89.88.18 | TablerlQosDscpQueueTable | not-accessible | current | This table specifies The DSCP to Queue map table |
| 1.3.6.1.4.1.89.88.18.1 | RowrlQosDscpQueueEntry | not-accessible | current | Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex |
| 1.3.6.1.4.1.89.88.18.1.1 | ColumnrlQosDscpIndex | not-accessible | current | DSCP value. |
| 1.3.6.1.4.1.89.88.18.1.2 | ColumnrlQosQueueNum | read-create | current | Queue Number. |
| 1.3.6.1.4.1.89.88.19 | TablerlQosTcpPortQueueTable | not-accessible | current | This table specifies TCP Port to Queue map table |
| 1.3.6.1.4.1.89.88.19.1 | RowrlQosTcpPortQueueEntry | not-accessible | current | Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort |
| 1.3.6.1.4.1.89.88.19.1.1 | ColumnrlQosTcpPort | not-accessible | current | TCP port number. |
| 1.3.6.1.4.1.89.88.19.1.2 | ColumnrlQosTcpQueueValue | read-create | current | Queue Number. |
| 1.3.6.1.4.1.89.88.19.1.3 | ColumnrlQosTcpPortQueueStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.20 | TablerlQosUdpPortQueueTable | not-accessible | current | This table specifies UDP Port to Queue map table |
| 1.3.6.1.4.1.89.88.20.1 | RowrlQosUdpPortQueueEntry | not-accessible | current | Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort |
| 1.3.6.1.4.1.89.88.20.1.1 | ColumnrlQosUdpPort | not-accessible | current | UDP port number. |
| 1.3.6.1.4.1.89.88.20.1.2 | ColumnrlQosUdpQueueValue | read-create | current | Queue value. |
| 1.3.6.1.4.1.89.88.20.1.3 | ColumnrlQosUdpPortQueueStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.21 | TablerlQosEfManageTable | not-accessible | current | This table specifies UDP Port to DSCP map table |
| 1.3.6.1.4.1.89.88.21.1 | RowrlQosEfManageEntry | not-accessible | current | This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId |
| 1.3.6.1.4.1.89.88.21.1.1 | ColumnrlQosEfQueueId | not-accessible | current | Queue-ID. |
| 1.3.6.1.4.1.89.88.21.1.2 | ColumnrlQosEfState | read-create | current | Enable/disable |
| 1.3.6.1.4.1.89.88.21.1.3 | ColumnrlQosEfPriority | read-create | current | The priority of the queue |
| 1.3.6.1.4.1.89.88.22 | TablerlQosQueueProfileTable | not-accessible | current | This table describes the queue managment profiles |
| 1.3.6.1.4.1.89.88.22.1 | RowrlQosQueueProfileEntry | not-accessible | current | Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName |
| 1.3.6.1.4.1.89.88.22.1.1 | ColumnrlQueueProfileName | not-accessible | current | Profile name for the Queue profile. |
| 1.3.6.1.4.1.89.88.22.1.2 | ColumnrlQosTypeQueue1 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.3 | ColumnrlQosValueQueue1 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.4 | ColumnrlQosTypeQueue2 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.5 | ColumnrlQosValueQueue2 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.6 | ColumnrlQosTypeQueue3 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.7 | ColumnrlQosValueQueue3 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.8 | ColumnrlQosTypeQueue4 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.9 | ColumnrlQosValueQueue4 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.10 | ColumnrlQosTypeQueue5 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.11 | ColumnrlQosValueQueue5 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.12 | ColumnrlQosTypeQueue6 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.13 | ColumnrlQosValueQueue6 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.14 | ColumnrlQosTypeQueue7 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.15 | ColumnrlQosValueQueue7 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.16 | ColumnrlQosTypeQueue8 | read-only | current | EF or WRR |
| 1.3.6.1.4.1.89.88.22.1.17 | ColumnrlQosValueQueue8 | read-create | current | for EF read-only for wrr the weight |
| 1.3.6.1.4.1.89.88.22.1.18 | ColumnrlQosQueueProfileStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.22.1.19 | ColumnrlQosNumOfIfConnections | read-only | current | how many time this entry connected to the if policy table |
| 1.3.6.1.4.1.89.88.23 | TablerlQosQueueShapeProfileTable | not-accessible | current | This table specifies the queue shaper profile |
| 1.3.6.1.4.1.89.88.23.1 | RowrlQosQueueShapeProfileEntry | not-accessible | current | Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex |
| 1.3.6.1.4.1.89.88.23.1.1 | ColumnrlQosQueueShapeIndex | not-accessible | current | Profile Index. |
| 1.3.6.1.4.1.89.88.23.1.2 | ColumnrlQosCirQueue1 | read-create | current | CIR for Queue1 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.3 | ColumnrlQosCbsQueue1 | read-create | current | CBS for Queue1 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.4 | ColumnrlQosCirQueue2 | read-create | current | CIR for Queue2 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.5 | ColumnrlQosCbsQueue2 | read-create | current | CBS for Queue2 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.6 | ColumnrlQosCirQueue3 | read-create | current | CIR for Queue3 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.7 | ColumnrlQosCbsQueue3 | read-create | current | CBS for Queue3 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.8 | ColumnrlQosCirQueue4 | read-create | current | CIR for Queue4 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.9 | ColumnrlQosCbsQueue4 | read-create | current | CBS for Queue4 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.10 | ColumnrlQosCirQueue5 | read-create | current | CIR for Queue5 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.11 | ColumnrlQosCbsQueue5 | read-create | current | CBS for Queue5 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.12 | ColumnrlQosCirQueue6 | read-create | current | CIR for Queue6 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.13 | ColumnrlQosCbsQueue6 | read-create | current | CBS for Queue6 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.14 | ColumnrlQosCirQueue7 | read-create | current | CIR for Queue7 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.15 | ColumnrlQosCbsQueue7 | read-create | current | CBS for Queue7 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.16 | ColumnrlQosCirQueue8 | read-create | current | CIR for Queue8 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.17 | ColumnrlQosCbsQueue8 | read-create | current | CBS for Queue8 0 for not active |
| 1.3.6.1.4.1.89.88.23.1.18 | ColumnrlQosQueueShapeProfileStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.24 | TablerlQosAclCounterTable | not-accessible | current | The table is used to show statistics for ACL applied on an interface. |
| 1.3.6.1.4.1.89.88.24.1 | RowrlQosAclCounterEntry | not-accessible | current | This entry shows value of conter for a particular ACE of an ACL. |
| 1.3.6.1.4.1.89.88.24.1.1 | ColumnrlQosAclCounterInterface | read-only | current | Interface Index on which ACL is applied. |
| 1.3.6.1.4.1.89.88.24.1.2 | ColumnrlQosAclCounterAclIndex | read-only | current | Index of ACL, which was applied on the IfIndex. |
| 1.3.6.1.4.1.89.88.24.1.3 | ColumnrlQosAclCounterAceIndex | read-only | current | Index of ACE, which is belong to an ACL. |
| 1.3.6.1.4.1.89.88.24.1.4 | ColumnrlQosAclCounterValue | read-only | current | The value of the ACE counter. For Broadcom ASICs it shows number of matched packets. For Marvel ASICs -TBD. |
| 1.3.6.1.4.1.89.88.25 | TablerlQosFreeIndexesTable | not-accessible | current | The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. … |
| 1.3.6.1.4.1.89.88.25.1 | RowrlQosFreeIndexesEntry | not-accessible | current | The entry is used to get free index for particular table. |
| 1.3.6.1.4.1.89.88.25.1.1 | ColumnrlQosFreeIndexesTableId | read-only | current | Identification of the table, for which free index is retrieved. |
| 1.3.6.1.4.1.89.88.25.1.2 | ColumnrlQosFreeIndexesValue | read-only | current | Free index for table. 0 means no free entries. |
| 1.3.6.1.4.1.89.88.26 | TablerlQosNamesToIndexesTable | not-accessible | current | The table is used to get the ACL,Class-Map and Policy-Map indexes from the name. |
| 1.3.6.1.4.1.89.88.26.1 | RowrlQosNamesToIndexesEntry | not-accessible | current | The entry is used to get index form particular name and table type. |
| 1.3.6.1.4.1.89.88.26.1.1 | ColumnrlQosNamesToIndexesTableId | not-accessible | current | Identification of the table, for which the index is retrieved. |
| 1.3.6.1.4.1.89.88.26.1.2 | ColumnrlQosNamesToIndexesName | not-accessible | current | The name of the entry |
| 1.3.6.1.4.1.89.88.26.1.3 | ColumnrlQosNamesToIndexesValue | read-only | current | the index for table |
| 1.3.6.1.4.1.89.88.27 | ScalarrlQosStackControlQueue | read-only | current | This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object… |
| 1.3.6.1.4.1.89.88.28 | ScalarrlQosStackControlCos | read-only | current | This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT… |
| 1.3.6.1.4.1.89.88.29 | TablerlQosCosQueueDefaultMapTable | not-accessible | current | The table is used to set default 802.1p map (vpt to queue) |
| 1.3.6.1.4.1.89.88.29.1 | RowrlQosCosQueueDefaultMapEntry | not-accessible | current | The entry is used to get index form particular name and table type. |
| 1.3.6.1.4.1.89.88.29.1.1 | ColumnrlQosCosQueueDefaultMapVpt | read-only | current | vlan priority tag , 3 bits of priority which determine the service class. |
| 1.3.6.1.4.1.89.88.29.1.2 | ColumnrlQosCosQueueDefaultMapQueueId | read-only | current | the queue id vary from the first queue id to Max Number of queues supported |
| 1.3.6.1.4.1.89.88.30 | TablerlQosPredefBlockAclTable | not-accessible | current | The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simulta… |
| 1.3.6.1.4.1.89.88.30.1 | RowrlQosPredefBlockAclEntry | not-accessible | current | The entry is used to apply predefined ACLs to the interface. |
| 1.3.6.1.4.1.89.88.30.1.1 | ColumnrlQosPredefBlockAclIfIndex | not-accessible | current | IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured. |
| 1.3.6.1.4.1.89.88.30.1.2 | ColumnrlQosPredefBlockAclIfType | not-accessible | current | Interface Type(vlan/port). |
| 1.3.6.1.4.1.89.88.30.1.3 | ColumnrlQosPredefBlockAclMask | read-create | current | This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask De… |
| 1.3.6.1.4.1.89.88.30.1.4 | ColumnrlQosPredefBlockAclStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.31 | TablerlQosAceTidxTable | not-accessible | current | This table specifies ACE table with two index information |
| 1.3.6.1.4.1.89.88.31.1 | RowrlQosAceTidxEntry | not-accessible | current | Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential… |
| 1.3.6.1.4.1.89.88.31.1.1 | ColumnrlQosAceTidxAclIndex | not-accessible | current | An arbitrary incremental Index for the ACL ACE connection. |
| 1.3.6.1.4.1.89.88.31.1.2 | ColumnrlQosAceTidxIndex | not-accessible | current | An arbitrary incremental Index for the ACE table. |
| 1.3.6.1.4.1.89.88.31.1.3 | ColumnrlQosAceTidxAction | read-create | current | ACE Action to take. |
| 1.3.6.1.4.1.89.88.31.1.4 | ColumnrlQosAceTidxType | read-create | current | ACE Type |
| 1.3.6.1.4.1.89.88.31.1.5 | ColumnrlQosAceTidxTuple1 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.6 | ColumnrlQosAceTidxTuple2 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.7 | ColumnrlQosAceTidxTuple3 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.8 | ColumnrlQosAceTidxTuple4 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.9 | ColumnrlQosAceTidxTuple5 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.10 | ColumnrlQosAceTidxTuple6 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.11 | ColumnrlQosAceTidxTuple7 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.12 | ColumnrlQosAceTidxTuple8 | read-create | current | ACE Tuple pointer. |
| 1.3.6.1.4.1.89.88.31.1.13 | ColumnrlQosAceTidxAccount | read-create | current | ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. For Broadcom ASICs this counter shows number of matche… |
| 1.3.6.1.4.1.89.88.31.1.14 | ColumnrlQosAceTidxStatus | read-create | current | The status of a table entry. It is used to delete/Add an entry from this table. |
| 1.3.6.1.4.1.89.88.32 | ScalarrlQosMibVersion | read-only | current | MIB's version, the current version is 4 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. C… |
| 1.3.6.1.4.1.89.88.33 | TablerlQosDscpQueueDefaultMapTable | not-accessible | current | The table is used to set default dscp to queue map |
| 1.3.6.1.4.1.89.88.33.1 | RowrlQosDscpQueueDefaultMapEntry | not-accessible | current | The entry is used to get index form particular name and table type. |
| 1.3.6.1.4.1.89.88.33.1.1 | ColumnrlQosDscpQueueDefaultMapDscp | read-only | current | dscp , 6 bits of priority which determine the service class. |
| 1.3.6.1.4.1.89.88.33.1.2 | ColumnrlQosDscpQueueDefaultMapQueueId | read-only | current | the queue id vary from the first queue id to Max Number of queues supported |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AceActionType | INTEGER { permit(1), deny(2), deny-DisablePort(3) } | current | Specifies one of 3 ACE Actions: 1- Permit- permit to the traffic that define by the parameters. 2- Deny- deny the traffic that define by the parameter. 3- Deny- deny the traffic that define by the parameters and disable… |
| AceObjectType | INTEGER { ip(1), ip-TCP(2), ip-UDP(3), ip-Offset(4), mac(5), mac-Offset(6) } | current | Specifies one of 6 ACE types: 1- IP ACE. 2- IP-TCP ACE. 3- IP-UDP ACE. 4- IP-offset ACE. 5- MAC ACE. 6- MAC-offset ACE. |
| AclDefaultAction | INTEGER { deny-all(1), forward-all(2) } | current | Default action when the ACL reach end point. |
| AclObjectType | INTEGER { mac(1), ip(2) } | current | Specifies one of 2 ACL types: 1- MAC ACL. 2- IP ACL |
| BinaryStatus | INTEGER { disable(1), enable(2) } | current | Specifies Disable or enable. |
| ClassMapAction | INTEGER { none(1), setIP-Precedence(2), setDSCP(3), setQueue(4), setCos(5), trustCos(6), trustDSCP(7), trustTCP-UDPport(8) } | current | Specifies one of 8 Class-map actios: 1- no action. 2- Mark IP-Precedence. 3- Mark DSCP. 4- Set Egress queueu 5- Mark VPT 6- Choose queue by the VPT. 7- Choose queue by the DSCP. 8- Choose queue by the TCP/UDP port. |
| ClassMapType | INTEGER { matchAll(1), matchAny(2) } | current | Specifies one of 2 Class-map types: 1- Match all. logical and between all statements. 2- Match any. logical or between all statements. |
| ClassOffsetType | INTEGER { packetStart(1), layer2-start(2), mpls-start(3), layer3-start(4), layer4-start(5), layer5-start(6), vlan(7), in-port(8), out-port(9) } | current | Specifies one of 6 offset types: 1- Absolute-start of the packet. 2- Layer 2-start of MAC header. 3- MPLS-start of MPLS header. 4- Layer 3-start of layer 3 header. 5- Layer 4-start of layer 4 header. 6- Layer 5-after TC… |
| ClassTupleType | INTEGER { protocol(1), ip-src(2), ip-dest(3), dscp(4), ip-precedence(5), udp-port-src(6), udp-port-dest(7), tcp-port-src(8), tcp-port-dest(9), mac-src(10), mac-dest(11), vlan(12), in-port(13), out-port(14), general(15) } | current | Specifies one of Tuple types |
| InterfaceType | INTEGER { vlan(1), port(2) } | current | Interface type. |
| PolicerAction | INTEGER { none(1), drop(2), remark(3), explicit-remark(4), cascadePointer(5) } | current | Specifies one of 4 Policer Action: 1- No Action 2- Drop out of profile packets. 3- Remark out of profile packets. 4- Remark to explicit value out of profile packets 5- this policer is part of cascade chain |
| PolicerType | INTEGER { single(1), aggregate(2), cascade(3) } | current | Specifies one of 3 Policer types: 1- Single policer only per one class map. 2- Aggregate policer can be applied to several class maps. 3- Cascade policer. |
| QosObjectBasicMode | INTEGER { none(1), vpt(2), dscp(3), dscp-mutation(4), tcp-udp(5) } | current | Specifies one of 6 QoS Basic mode: 1- none. means that only ACL can be applied. 2- 802.1p. queue is set by the VPT field. 3- DSCP. queue is set by the DSCP field 4- DSCP-Mutation. the DSCP mutate in the ingress and then… |
| QosObjectMode | INTEGER { disable(1), basic(2), advance(3), service(4) } | current | Specifies one of 3 QoS mode: 1- disable no QoS on the system 2- Basic Qos mode only trust mode with ACL are enabled. 3- Advance mode all Qos option are enabled. 4- Service Mode all Qos option are enabled only in service… |
| QueueType | INTEGER { ef(1), wrr(2) } | current | Queue type Ef or WRR. |