RADLAN-TIMESYNCHRONIZATION-MIB
86 objects
The MIB module describes the private MIB for SNTP & TIME definitions.
Imported Objects
| RADLAN-MIB | rnd |
| RADLAN-SNMPv2 | TruthValue |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| SNMPv2-TC-v1 | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.92 | IdentityrlTimeSynchronization | The MIB module describes the private MIB for SNTP & TIME definitions. | ||
| 1.3.6.1.4.1.89.92.1 | NoderlTimeSyncMethodMode | |||
| 1.3.6.1.4.1.89.92.1.1 | ScalarrlTimeSyncMibVersion | read-only | current | TimeSync Mib Version. |
| 1.3.6.1.4.1.89.92.1.2 | ScalarrndTimeSyncManagedTime | read-write | current | The time will be sent in the format hhmmss |
| 1.3.6.1.4.1.89.92.1.3 | ScalarrndTimeSyncManagedDate | read-write | current | The date will be sent in the format ddmmyy |
| 1.3.6.1.4.1.89.92.1.4 | ScalarrndTimeSyncManagedDateTime | read-write | current | The date and time will be sent in the format ddmmyyhhmmss |
| 1.3.6.1.4.1.89.92.1.5 | ScalarrlTimeSyncMethod | read-write | current | Method to be used for time synchronization in the device. |
| 1.3.6.1.4.1.89.92.1.6 | ScalarrlTimeZone | read-write | current | Offset from Greenwich time (format [+/-]hh:mm). |
| 1.3.6.1.4.1.89.92.1.7 | ScalarrlTimeZoneCode | read-write | current | Code definition for current TimeZone. |
| 1.3.6.1.4.1.89.92.1.8 | ScalarrlDaylightSavingTimeMode | read-write | current | Daylight Saving Time - Recurring/Date/None. |
| 1.3.6.1.4.1.89.92.1.9 | ScalarrlDaylightSavingTimeStart | read-write | current | Daylight Saving Time start date. In recurring mode: week wday month hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Satu… |
| 1.3.6.1.4.1.89.92.1.10 | ScalarrlDaylightSavingTimeEnd | read-write | current | Daylight Saving Time end date. In recurring mode: week wday month hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturd… |
| 1.3.6.1.4.1.89.92.1.11 | ScalarrlDaylightSavingTimeOffset | read-write | current | Daylight Saving Time - The number of minutes to add to the clock during summer time. |
| 1.3.6.1.4.1.89.92.1.12 | ScalarrlDaylightSavingTimeCode | read-write | current | Code definition for current Daylight Saving Time. |
| 1.3.6.1.4.1.89.92.1.13 | ScalarrlTZDSTOffset | read-only | current | Local Time Zone and Daylight Saving Time offset in seconds. |
| 1.3.6.1.4.1.89.92.2 | NoderlSntpNtpClient | |||
| 1.3.6.1.4.1.89.92.2.1 | NoderlSntpNtpConfig | |||
| 1.3.6.1.4.1.89.92.2.1.1 | ScalarrlSntpNtpMibVersion | read-only | current | SntpNtp Mib Version. |
| 1.3.6.1.4.1.89.92.2.1.2 | ScalarrlSntpNtpConfigMode | read-only | current | Current configuration operational mode of SNTP/NTP client. |
| 1.3.6.1.4.1.89.92.2.1.3 | ScalarrlSntpNtpConfigSysStratum | read-only | current | The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RF… |
| 1.3.6.1.4.1.89.92.2.1.4 | ScalarrlSntpNtpConfigPollInterval | read-write | current | Period of time (in seconds) between succesive attempts to perform an update via SNTP. |
| 1.3.6.1.4.1.89.92.2.1.5 | ScalarrlSntpNtpConfigPrimaryPollSrvAddr | read-only | current | Ip Address of a trusted SNTP server for polling. |
| 1.3.6.1.4.1.89.92.2.1.6 | ScalarrlSntpNtpConfigPrimaryPollSrvMrid | read-only | current | The mrid of the primary server. |
| 1.3.6.1.4.1.89.92.2.1.7 | ScalarrlSntpNtpConfigPrimaryPollSrvIfIndex | read-only | current | The interface addressed of the primary server. |
| 1.3.6.1.4.1.89.92.2.1.8 | ScalarrlSntpNtpConfigPrimaryPollSrvStratum | read-only | current | The stratum of the primary polling server. |
| 1.3.6.1.4.1.89.92.2.1.9 | ScalarrlSntpNtpConfigSyncSrvAddr | read-only | current | Ip Address of the synced server. |
| 1.3.6.1.4.1.89.92.2.1.10 | ScalarrlSntpNtpConfigSyncSrvMrid | read-only | current | The mrid of the synced server. |
| 1.3.6.1.4.1.89.92.2.1.11 | ScalarrlSntpNtpConfigSyncSrvIfIndex | read-only | current | The interface addressed of the synced server. |
| 1.3.6.1.4.1.89.92.2.1.12 | ScalarrlSntpNtpConfigSyncSrvType | read-only | current | Synced server type. |
| 1.3.6.1.4.1.89.92.2.1.13 | ScalarrlSntpNtpConfigSyncSrvStratum | read-only | current | The stratum of the synced server. |
| 1.3.6.1.4.1.89.92.2.1.14 | ScalarrlSntpNtpConfigRetryTimeout | read-only | current | SNTP/NTP requests Retry Interval. |
| 1.3.6.1.4.1.89.92.2.1.15 | ScalarrlSntpNtpConfigRetryCnt | read-only | current | SNTP/NTP requests Retry Count. |
| 1.3.6.1.4.1.89.92.2.2 | NoderlSntpConfig | |||
| 1.3.6.1.4.1.89.92.2.2.1 | ScalarrlSntpClientMode | read-only | current | Current operational mode of SNTP client. |
| 1.3.6.1.4.1.89.92.2.2.2 | ScalarrlSntpUnicastAdminState | read-write | current | SNTP Unicast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.89.92.2.2.3 | ScalarrlSntpBroadcastAdminState | read-write | current | SNTP Broadcast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabl… |
| 1.3.6.1.4.1.89.92.2.2.4 | ScalarrlSntpAnycastAdminState | read-write | current | SNTP Anycast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.89.92.2.2.5 | ScalarrlSntpUnicastPollState | read-write | current | SNTP Unicast poll state - TRUE for polled. |
| 1.3.6.1.4.1.89.92.2.2.6 | ScalarrlSntpBroadcastPollState | read-write | current | SNTP Broadcast poll state - TRUE for polled. |
| 1.3.6.1.4.1.89.92.2.2.7 | ScalarrlSntpAnycastPollState | read-write | current | SNTP Anycast poll state - TRUE for polled. |
| 1.3.6.1.4.1.89.92.2.2.8 | ScalarrlSntpAuthenticationState | read-write | current | SNTP authentication state- Enable/Disable SNTP. |
| 1.3.6.1.4.1.89.92.2.2.9 | ScalarrlTimeValidFlag | read-write | current | Is time valid. |
| 1.3.6.1.4.1.89.92.2.2.10 | TablerlSntpConfigBroadcastTable | not-accessible | current | A table containing broadcast mode information per interface. |
| 1.3.6.1.4.1.89.92.2.2.10.1 | RowrlSntpBroadcastEntry | not-accessible | current | Private paramters for interface: sntp status, broadcast mode. |
| 1.3.6.1.4.1.89.92.2.2.10.1.1 | ColumnrlSntpBroadcastIfIndex | not-accessible | current | The interface addressed by this entry. |
| 1.3.6.1.4.1.89.92.2.2.10.1.2 | ColumnrlSntpBroadcastIfAdminState | read-write | current | SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.89.92.2.2.10.1.3 | ColumnrlSntpBroadcastMode | read-write | current | SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (w… |
| 1.3.6.1.4.1.89.92.2.2.10.1.4 | ColumnrlSntpBroadcastPolled | read-write | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.89.92.2.2.10.1.5 | ColumnrlSntpBroadcastAddress | read-only | current | Ip Address of a trusted SNTP server. |
| 1.3.6.1.4.1.89.92.2.2.10.1.6 | ColumnrlSntpBroadcastStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.89.92.2.2.10.1.7 | ColumnrlSntpBroadcastLastResp | read-only | current | SNTP Broadcast Last Response Time |
| 1.3.6.1.4.1.89.92.2.2.10.1.8 | ColumnrlSntpBroadcastStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - ser… |
| 1.3.6.1.4.1.89.92.2.2.10.1.9 | ColumnrlSntpBroadcastOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.89.92.2.2.10.1.10 | ColumnrlSntpBroadcastDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.89.92.2.2.10.1.11 | ColumnrlSntpBroadcastRowStatus | read-write | current | The Status of this SNTP broadcast interface information. |
| 1.3.6.1.4.1.89.92.2.2.11 | TablerlSntpConfigAnycastTable | not-accessible | current | A table containing anycast information per interface. |
| 1.3.6.1.4.1.89.92.2.2.11.1 | RowrlSntpAnycastEntry | not-accessible | current | Private paramters for interface: server info. |
| 1.3.6.1.4.1.89.92.2.2.11.1.1 | ColumnrlSntpAnycastIfIndex | not-accessible | current | The interface addressed by this entry. |
| 1.3.6.1.4.1.89.92.2.2.11.1.2 | ColumnrlSntpAnycastAddress | read-only | current | Ip Address of a trusted SNTP server. |
| 1.3.6.1.4.1.89.92.2.2.11.1.3 | ColumnrlSntpAnycastStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.89.92.2.2.11.1.4 | ColumnrlSntpAnycastLastResp | read-only | current | SNTP Anycast Last Response Time |
| 1.3.6.1.4.1.89.92.2.2.11.1.5 | ColumnrlSntpAnycastStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - serve… |
| 1.3.6.1.4.1.89.92.2.2.11.1.6 | ColumnrlSntpAnycastOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.89.92.2.2.11.1.7 | ColumnrlSntpAnycastDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.89.92.2.2.11.1.8 | ColumnrlSntpAnycastRowStatus | read-write | current | The Status of this SNTP anycast interface information. |
| 1.3.6.1.4.1.89.92.2.2.12 | TablerlSntpConfigServerTable | not-accessible | current | A table containing trusted SNTP servers to be queried in unicast or broadcast mode. |
| 1.3.6.1.4.1.89.92.2.2.12.1 | RowrlSntpServerEntry | not-accessible | current | A trusted server. |
| 1.3.6.1.4.1.89.92.2.2.12.1.1 | ColumnrlSntpServerAddress | not-accessible | current | Ip Address of a trusted SNTP server. |
| 1.3.6.1.4.1.89.92.2.2.12.1.2 | ColumnrlSntpServerPolled | read-write | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.89.92.2.2.12.1.3 | ColumnrlSntpServerStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.89.92.2.2.12.1.4 | ColumnrlSntpServerLastResp | read-only | current | SNTP Server Last Response Time |
| 1.3.6.1.4.1.89.92.2.2.12.1.5 | ColumnrlSntpServerStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server… |
| 1.3.6.1.4.1.89.92.2.2.12.1.6 | ColumnrlSntpServersOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.89.92.2.2.12.1.7 | ColumnrlSntpServersDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.89.92.2.2.12.1.8 | ColumnrlSntpServersKeyIdentifier | read-write | current | Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done. |
| 1.3.6.1.4.1.89.92.2.2.12.1.9 | ColumnrlSntpServerRowStatus | read-write | current | The Status of this SNTP server information. |
| 1.3.6.1.4.1.89.92.2.2.13 | TablerlSntpConfigAuthenticationTable | not-accessible | current | A table authentication keys. |
| 1.3.6.1.4.1.89.92.2.2.13.1 | RowrlSntpAuthenticationEntry | not-accessible | current | Keys information for authenticationof NTP packets. |
| 1.3.6.1.4.1.89.92.2.2.13.1.1 | ColumnrlSntpAuthenticationKeyID | read-write | current | The key identifier. Valid rabge for key identifier is 1-4294967295. |
| 1.3.6.1.4.1.89.92.2.2.13.1.2 | ColumnrlSntpAuthenticationKeyValue | read-write | current | Key value. |
| 1.3.6.1.4.1.89.92.2.2.13.1.3 | ColumnrlSntpAuthenticationKeyState | read-write | current | Authentication key state - Enable/Disable key. |
| 1.3.6.1.4.1.89.92.2.2.13.1.4 | ColumnrlSntpAuthenticationRowStatus | read-write | current | The Status of this Authentication key information. |
| 1.3.6.1.4.1.89.92.2.3 | NoderlNtpConfig |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NTPSignedTimeValue | OCTET STRING (SIZE (4)) | current | The time in seconds that could represent signed quantities like time delay with respect to some source. This textual-convention is specific to RADLAN implementation of NTP where 32-bit integers are used for such quantit… |
| NTPStratum | Integer32 (0..255) | current | Indicates the stratum of the clock. The stratum defines the accuracy of a time server. Higher the stratum, lower the accuracy. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, seco… |
| NTPTimeStamp | OCTET STRING (SIZE (8)) | current | NTP timestamps are represented as a 64-bit unsigned fixed-point number, in seconds relative to 00:00 on 1 January 1900. The integer part is in the first 32 bits and the fraction part is in the last 32 bits. |