RC-2K-MIB
353 objects
Enterprise MIB for the rc2k.
Imported Objects
| IF-MIB | InterfaceIndex |
| IPV6-TC | Ipv6Address |
| RAPID-CITY | rc2k |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.100.0 | Identityrc2kMib | read-write | Enterprise MIB for the rc2k. | |
| 1.3.6.1.4.1.2272.1.100.1 | Noderc2kChassis | |||
| 1.3.6.1.4.1.2272.1.100.1.1 | Scalarrc2kChassisPortOperStatus | read-only | current | A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0… |
| 1.3.6.1.4.1.2272.1.100.1.2 | Scalarrc2kChassisTemperature | read-only | current | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.3 | Scalarrc2kChassisAmbientLowerTemperature | read-only | obsolete | Used to indicate the temperature of the air entering the fan at the lower half of the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.4 | Scalarrc2kChassisAmbientUpperTemperature | read-only | obsolete | Used to indicate the temperature of the air entering the fan at the upper half of the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.5 | Scalarrc2kChassisBaseMacAddr | read-only | current | base mac addr |
| 1.3.6.1.4.1.2272.1.100.1.6 | Scalarrc2kChassisMacAddrCapacity | read-only | current | Mac Address Capacity |
| 1.3.6.1.4.1.2272.1.100.1.7 | Scalarrc2kChassisPbtMacAddr | read-only | current | pbt mac addr |
| 1.3.6.1.4.1.2272.1.100.1.8 | Scalarrc2kChassisUserLabel1 | read-write | current | user defined management information. This can be used to provide extra information about the chassis. Syntax can be as expected by the management system |
| 1.3.6.1.4.1.2272.1.100.1.9 | Scalarrc2kChassisPbtMacAddrList | read-only | current | List of 8 Pbt Mac addresses. The first Pbt Mac Address is rc2kChassisPbtMacAddr. The other 7 Pbt Mac Addresses are derived by increment 1 to the previous mac s… |
| 1.3.6.1.4.1.2272.1.100.1.10 | Scalarrc2kChassisSystemTempLedColor | read-only | current | Used to indicate the led color of the system temperature which is under or above the threshold. The threshold is 60 degree in celsius. 'green' means normal. An… |
| 1.3.6.1.4.1.2272.1.100.1.11 | Scalarrc2kChassisPortLedStatus | read-only | current | This is applicable only for VSP4K. Max port 3/64 A bit array that contains the LED status of the ports in the device. 1 octet is used for each port. Starting a… |
| 1.3.6.1.4.1.2272.1.100.1.12 | Scalarrc2kChassisPortLed2Status | read-only | current | This is applicable only for VSP8200, VSP8400 & VSP8600. Each octet string contains the value of a port LED status. One octet is used for each port. Each octet … |
| 1.3.6.1.4.1.2272.1.100.1.13 | Scalarrc2kChassisPortLicenseStatus | read-only | current | This is applicable only for VSP7K. The string is 56 octets long, for a total of 448 bits. Each bit corresponds to a port, as represented by its ifIndex value. … |
| 1.3.6.1.4.1.2272.1.100.1.14 | Scalarrc2kChassisPortLed3Status | read-only | current | This is applicable only for Tomahawk 100G port, DSG9032, DSG8064, T3x032(with 32 100G ports), T3x048v(with 48 25G ports plus 8 100G ports) and VSP4900. For DSG… |
| 1.3.6.1.4.1.2272.1.100.2 | Tablerc2kCpuEthernetPortTable | not-accessible | current | 2k CPU Ethernet Port table |
| 1.3.6.1.4.1.2272.1.100.2.1 | Rowrc2kCpuEthernetPortEntry | not-accessible | current | Entry containing infomation of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.2.1.1 | Columnrc2kCpuEthernetPortIfIndex | read-only | current | IfIndex of the port. |
| 1.3.6.1.4.1.2272.1.100.2.1.2 | Columnrc2kCpuEthernetPortDescr | read-only | current | Port description |
| 1.3.6.1.4.1.2272.1.100.2.1.3 | Columnrc2kCpuEthernetPortAdminStatus | read-write | current | Used to configure the admininstrative status of the port. |
| 1.3.6.1.4.1.2272.1.100.2.1.4 | Columnrc2kCpuEthernetPortOperStatus | read-only | current | Used to indicate the administrative status of the port. |
| 1.3.6.1.4.1.2272.1.100.2.1.5 | Columnrc2kCpuEthernetPortAddr | read-write | current | Used to configure the port's IP address |
| 1.3.6.1.4.1.2272.1.100.2.1.6 | Columnrc2kCpuEthernetPortMask | read-write | current | Used to configure the port's net mask |
| 1.3.6.1.4.1.2272.1.100.2.1.7 | Columnrc2kCpuEthernetPortGateway | read-write | current | Used to configure the the IP address of the gateway that should be used to forward IP traffic. |
| 1.3.6.1.4.1.2272.1.100.2.1.8 | Columnrc2kCpuEthernetPortNetwork | read-write | current | Used to configure the network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.2.1.9 | Columnrc2kCpuEthernetPortAutoNegotiate | read-write | current | Used to configure auto-negotiation on this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.10 | Columnrc2kCpuEthernetPortAdminDuplex | read-write | current | Used to configure the administrative duplex setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.11 | Columnrc2kCpuEthernetPortOperDuplex | read-only | current | Used to indicate the operational duplex setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.12 | Columnrc2kCpuEthernetPortAdminSpeed | read-write | current | Used to configure the administrative speed setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.13 | Columnrc2kCpuEthernetPortOperSpeed | read-only | current | Used to indicate the operational duplex setting for this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.14 | Columnrc2kCpuEthernetPortEnableBootp | read-write | current | Used to enable/disable the Bootp feature on this port. |
| 1.3.6.1.4.1.2272.1.100.2.1.15 | Columnrc2kCpuEthernetPortMgmtMacAddr | read-only | current | Used to indicate the mac addr for this port. |
| 1.3.6.1.4.1.2272.1.100.3 | Tablerc2kCpuSerialPortTable | not-accessible | current | 2k CPU Serial Port table |
| 1.3.6.1.4.1.2272.1.100.3.1 | Rowrc2kCpuSerialPortEntry | not-accessible | current | Entry containing infomation of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.3.1.1 | Columnrc2kCpuSerialPortIfIndex | read-only | current | IfIndex for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.2 | Columnrc2kCpuSerialPortDescr | read-only | current | Port description. |
| 1.3.6.1.4.1.2272.1.100.3.1.3 | Columnrc2kCpuSerialPortMode | read-write | current | Used to configure the mode this port should operate in. |
| 1.3.6.1.4.1.2272.1.100.3.1.4 | Columnrc2kCpuSerialPortAdminStatus | read-write | current | Used to configure the administrative status setting for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.5 | Columnrc2kCpuSerialPortOperStatus | read-only | current | Used to indicate the operational status setting for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.6 | Columnrc2kCpuSerialPortBaudRate | read-write | current | Used to configure the baud rate of this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.7 | Columnrc2kCpuSerialPortDataBits | read-write | current | Used to configure the number of data bits, per byte of data, this port should send/receive. |
| 1.3.6.1.4.1.2272.1.100.3.1.8 | Columnrc2kCpuSerialPortMyAddr | read-write | current | Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes. |
| 1.3.6.1.4.1.2272.1.100.3.1.9 | Columnrc2kCpuSerialPortPeerAddr | read-write | current | Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes. |
| 1.3.6.1.4.1.2272.1.100.3.1.10 | Columnrc2kCpuSerialPortSlipMtu | read-write | current | Used to configure the MTU for this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.11 | Columnrc2kCpuSerialPortSlipTxRxCompress | read-write | current | Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.12 | Columnrc2kCpuSerialPortSlipRxCompress | read-write | current | Used to enable/disable compression for receiving packets on this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.13 | Columnrc2kCpuSerialPortPppConfigFile | read-write | current | Used to configure the configuration file to use for PPP. |
| 1.3.6.1.4.1.2272.1.100.4 | Noderc2kDevice | |||
| 1.3.6.1.4.1.2272.1.100.4.1 | Tablerc2kDeviceGlobalTable | not-accessible | current | 2k CPU Ethernet Port table |
| 1.3.6.1.4.1.2272.1.100.4.1.1 | Rowrc2kDeviceGlobalEntry | not-accessible | current | Entry containing infomation of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.4.1.1.1 | Columnrc2kDeviceGlobalSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.1.1.2 | Columnrc2kDeviceGlobalFlashBytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.3 | Columnrc2kDeviceGlobalFlashBytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.4 | Columnrc2kDeviceGlobalFlashNumFiles | read-only | current | # files in flash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.5 | Columnrc2kDeviceGlobalPcmciaBytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.6 | Columnrc2kDeviceGlobalPcmciaBytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.7 | Columnrc2kDeviceGlobalPcmciaNumFiles | read-only | current | # files in pcmcia |
| 1.3.6.1.4.1.2272.1.100.4.1.1.8 | Columnrc2kDeviceGlobalAction | read-write | current | none(1), resetPcmcia(2), .. |
| 1.3.6.1.4.1.2272.1.100.4.1.1.9 | Columnrc2kDeviceGlobalResult | read-only | current | Used to indicate the result of the last action performed on one of the system's device. |
| 1.3.6.1.4.1.2272.1.100.4.1.1.10 | Columnrc2kDeviceGlobalFlash1BytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.11 | Columnrc2kDeviceGlobalFlash1BytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.12 | Columnrc2kDeviceGlobalFlash1NumFiles | read-only | current | # files in flash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.13 | Columnrc2kDeviceGlobalUsbBytesUsed | read-only | current | bytes used in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.14 | Columnrc2kDeviceGlobalUsbBytesFree | read-only | current | bytes free in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.15 | Columnrc2kDeviceGlobalUsbNumFiles | read-only | current | # files in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.16 | Columnrc2kDeviceGlobalExtflashBytesUsed | read-only | current | bytes used in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.17 | Columnrc2kDeviceGlobalExtflashBytesFree | read-only | current | bytes free in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.18 | Columnrc2kDeviceGlobalExtflashNumFiles | read-only | current | # files in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.19 | Columnrc2kDeviceGlobalIntflashBytesUsed | read-only | current | bytes used in intflash. It is used to replace rc2kDeviceGlobalFlashBytesUsed |
| 1.3.6.1.4.1.2272.1.100.4.1.1.20 | Columnrc2kDeviceGlobalIntflashBytesFree | read-only | current | bytes free in intflash. It is used to replace rc2kDeviceGlobalFlashByteFree |
| 1.3.6.1.4.1.2272.1.100.4.2 | Scalarrc2kDeviceSeparator1 | read-only | current | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| 1.3.6.1.4.1.2272.1.100.4.3 | Tablerc2kDeviceFlashFileTable | not-accessible | current | 2k Flash table |
| 1.3.6.1.4.1.2272.1.100.4.3.1 | Rowrc2kDeviceFlashFileEntry | not-accessible | current | Entry containing infomation of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.4.3.1.1 | Columnrc2kDeviceFlashFileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.3.1.2 | Columnrc2kDeviceFlashFileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.3.1.3 | Columnrc2kDeviceFlashFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.3.1.4 | Columnrc2kDeviceFlashFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.4 | Scalarrc2kDevicePcmciaPresent | read-only | current | pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table. |
| 1.3.6.1.4.1.2272.1.100.4.5 | Tablerc2kDevicePcmciaFileTable | not-accessible | current | 2k PCMCIA table |
| 1.3.6.1.4.1.2272.1.100.4.5.1 | Rowrc2kDevicePcmciaFileEntry | not-accessible | current | Entry containing infomation of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.4.5.1.1 | Columnrc2kDevicePcmciaFileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.5.1.2 | Columnrc2kDevicePcmciaFileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.5.1.3 | Columnrc2kDevicePcmciaFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.5.1.4 | Columnrc2kDevicePcmciaFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.6 | Scalarrc2kDeviceSeparator2 | read-only | current | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| 1.3.6.1.4.1.2272.1.100.4.7 | Scalarrc2kDeviceFlash1Present | read-only | current | This leaf is used to stop the access into Flash1 file table. |
| 1.3.6.1.4.1.2272.1.100.4.8 | Tablerc2kDeviceFlash1FileTable | not-accessible | current | 2k Flash1 table |
| 1.3.6.1.4.1.2272.1.100.4.8.1 | Rowrc2kDeviceFlash1FileEntry | not-accessible | current | Entry containing infomation of 2k Flash1 Files |
| 1.3.6.1.4.1.2272.1.100.4.8.1.1 | Columnrc2kDeviceFlash1FileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.8.1.2 | Columnrc2kDeviceFlash1FileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.8.1.3 | Columnrc2kDeviceFlash1FileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.8.1.4 | Columnrc2kDeviceFlash1FileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.9 | Tablerc2kDeviceExtflashFileTable | not-accessible | current | 2k Flash table |
| 1.3.6.1.4.1.2272.1.100.4.9.1 | Rowrc2kDeviceExtflashFileEntry | not-accessible | current | Entry containing information of extflash files |
| 1.3.6.1.4.1.2272.1.100.4.9.1.1 | Columnrc2kDeviceExtflashFileSlot | not-accessible | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.9.1.2 | Columnrc2kDeviceExtflashFileName | not-accessible | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.9.1.3 | Columnrc2kDeviceExtflashFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.9.1.4 | Columnrc2kDeviceExtflashFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.10 | Tablerc2kDeviceUsbFileTable | not-accessible | current | 2k Usb table |
| 1.3.6.1.4.1.2272.1.100.4.10.1 | Rowrc2kDeviceUsbFileEntry | not-accessible | current | Entry containing information of USB files |
| 1.3.6.1.4.1.2272.1.100.4.10.1.1 | Columnrc2kDeviceUsbFileSlot | not-accessible | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.10.1.2 | Columnrc2kDeviceUsbFileName | not-accessible | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.10.1.3 | Columnrc2kDeviceUsbFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.10.1.4 | Columnrc2kDeviceUsbFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.5 | Tablerc2kBootConfigTable | not-accessible | current | 2k Boot Configuration table |
| 1.3.6.1.4.1.2272.1.100.5.1 | Rowrc2kBootConfigEntry | not-accessible | current | Entry containing boot configuration information. |
| 1.3.6.1.4.1.2272.1.100.5.1.1 | Columnrc2kBootConfigSlot | read-only | current | slot number, tattoo use 3 as cpu slot, 4 & 7-10 are not valid cpu slot number, VSP uses slots 1 and 2 for cpu slot |
| 1.3.6.1.4.1.2272.1.100.5.1.2 | Columnrc2kBootConfigLastBootConfigSource | read-only | current | boot config source |
| 1.3.6.1.4.1.2272.1.100.5.1.3 | Columnrc2kBootConfigLastRuntimeImageSource | read-only | current | runtime image source |
| 1.3.6.1.4.1.2272.1.100.5.1.4 | Columnrc2kBootConfigLastRuntimeConfigSource | read-only | current | runtime config source |
| 1.3.6.1.4.1.2272.1.100.5.1.5 | Columnrc2kBootConfigPrimaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.6 | Columnrc2kBootConfigPrimaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.7 | Columnrc2kBootConfigSecondaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.8 | Columnrc2kBootConfigSecondaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.9 | Columnrc2kBootConfigTertiaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.10 | Columnrc2kBootConfigTertiaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.11 | Columnrc2kBootConfigEnableAutoBoot | read-write | current | auto boot mode |
| 1.3.6.1.4.1.2272.1.100.5.1.12 | Columnrc2kBootConfigEnableFactoryDefaults | read-write | current | use factory default |
| 1.3.6.1.4.1.2272.1.100.5.1.13 | Columnrc2kBootConfigEnableDebugMode | read-write | current | debug mode |
| 1.3.6.1.4.1.2272.1.100.5.1.14 | Columnrc2kBootConfigEnableHwWatchDogTimer | read-write | current | hw watch dog timer |
| 1.3.6.1.4.1.2272.1.100.5.1.15 | Columnrc2kBootConfigEnableRebootOnError | read-write | current | reboot on error |
| 1.3.6.1.4.1.2272.1.100.5.1.16 | Columnrc2kBootConfigEnableTelnetServer | read-write | current | telnet server |
| 1.3.6.1.4.1.2272.1.100.5.1.17 | Columnrc2kBootConfigEnableRloginServer | read-write | current | rlogin server |
| 1.3.6.1.4.1.2272.1.100.5.1.18 | Columnrc2kBootConfigEnableFtpServer | read-write | current | ftp server |
| 1.3.6.1.4.1.2272.1.100.5.1.19 | Columnrc2kBootConfigEnableTftpServer | read-write | current | tftp server |
| 1.3.6.1.4.1.2272.1.100.5.1.20 | Columnrc2kBootConfigSwVersion | read-only | current | current sw version |
| 1.3.6.1.4.1.2272.1.100.5.1.21 | Columnrc2kBootConfigMulticastConfigProfile | read-only | current | multicast config |
| 1.3.6.1.4.1.2272.1.100.5.1.22 | Columnrc2kBootConfigEnableSshServer | read-write | current | ssh server |
| 1.3.6.1.4.1.2272.1.100.5.1.23 | Columnrc2kBootConfigEnableAltLed | read-write | current | Boot flag for enableing Alternate LED |
| 1.3.6.1.4.1.2272.1.100.5.1.24 | Columnrc2kBootConfigPrimaryBackupConfigSource | read-write | current | primary backup config source (save config) |
| 1.3.6.1.4.1.2272.1.100.5.1.25 | Columnrc2kBootConfigSecondaryBackupConfigSource | read-write | current | secondary backup config source (save config) |
| 1.3.6.1.4.1.2272.1.100.5.1.26 | Columnrc2kBootConfigTertiaryBackupConfigSource | read-write | current | tertiary backup config source (save config) |
| 1.3.6.1.4.1.2272.1.100.5.1.27 | Columnrc2kBootConfigEnable8616ReAutoneg | read-write | current | Enable re-autoneg for 8616SX Cards (Intel GMAC fix) |
| 1.3.6.1.4.1.2272.1.100.5.1.28 | Columnrc2kBootConfigMezzImageSource | read-write | current | Mezz image source |
| 1.3.6.1.4.1.2272.1.100.5.1.29 | Columnrc2kBootConfigEnableMezz | read-write | current | Enable/disable Mezz Flag |
| 1.3.6.1.4.1.2272.1.100.5.1.30 | Columnrc2kBootConfigPrimaryLicenseSource | read-write | current | Primary choice for the license source |
| 1.3.6.1.4.1.2272.1.100.5.1.31 | Columnrc2kBootConfigSecondaryLicenseSource | read-write | current | Secondary choice for the license source |
| 1.3.6.1.4.1.2272.1.100.5.1.32 | Columnrc2kBootConfigTertiaryLicenseSource | read-write | current | Tertiary choice for the license source |
| 1.3.6.1.4.1.2272.1.100.5.1.33 | Columnrc2kBootConfigUnknownDstMacDiscard | read-write | obsolete | Enable/disable to discard the unknown destination mac address. A device reboot is required for the change to take effect. |
| 1.3.6.1.4.1.2272.1.100.5.1.34 | Columnrc2kBootConfigUnknownDstMacDiscardOperStatus | read-only | obsolete | Indicates the device operational status of unknown destination mac discard. |
| 1.3.6.1.4.1.2272.1.100.5.1.35 | Columnrc2kBootConfigEnableAutoAssignIp | read-write | current | Enable/disable auto-assign-ip feature |
| 1.3.6.1.4.1.2272.1.100.5.1.36 | Columnrc2kBootConfigUpgradeBootImageSource | read-write | current | Upgrade boot image source |
| 1.3.6.1.4.1.2272.1.100.5.1.37 | Columnrc2kBootConfigUpgradeRuntimeImageSource | read-write | current | Upgrade runtime image source |
| 1.3.6.1.4.1.2272.1.100.5.1.38 | Columnrc2kBootConfigUpgradeMezzImageSource | read-write | current | Upgrade mezz image source |
| 1.3.6.1.4.1.2272.1.100.5.1.39 | Columnrc2kBootConfigUpgradeConfigSource | read-write | current | Upgrade config source |
| 1.3.6.1.4.1.2272.1.100.5.1.40 | Columnrc2kBootConfigUpgradeRModImageSource | read-write | current | upgrade RMod image source |
| 1.3.6.1.4.1.2272.1.100.5.1.41 | Columnrc2kBootConfigUpgradeRCModImageSource | read-write | current | upgrade RCMod image source |
| 1.3.6.1.4.1.2272.1.100.5.1.42 | Columnrc2kBootConfigUpgradeESMImageSource | read-write | current | upgrade ESM image source |
| 1.3.6.1.4.1.2272.1.100.5.1.43 | Columnrc2kBootConfigFallBackBootImageSource | read-write | current | upgrade fall-back boot monitor source |
| 1.3.6.1.4.1.2272.1.100.5.1.44 | Columnrc2kBootConfigEnableCfPcCompat | read-write | current | Enable/disable CF PC compatibility |
| 1.3.6.1.4.1.2272.1.100.5.1.45 | Columnrc2kBootConfigLinecardCompatibilityMode | read-write | current | This indicates the compatibility mode of the IO cards on the Chassis. In gen1 mode, both the generation 1 cards and generation 2 (ROF) cards will be supported … |
| 1.3.6.1.4.1.2272.1.100.5.1.46 | Columnrc2kBootConfigEnableSpbmConfigMode | read-write | current | Enables spbm-config-mode boot flag. When this flag is true, SPBM configurations are allowed and PIM configurations are disabled and not allowed. When this flag… |
| 1.3.6.1.4.1.2272.1.100.5.1.47 | Columnrc2kBootConfigEnableIpv6Mode | read-write | current | Enable/disable Ipv6-Mode Flag.This flag is used only for VSP8200 and VSP4k because of the limitation in Trident2 where Ipv6 route with prefix-length >64 cannot… |
| 1.3.6.1.4.1.2272.1.100.5.1.48 | Columnrc2kBootConfigEnableEnhancedsecureMode | read-write | current | Enable/disable Federal Mode Flag |
| 1.3.6.1.4.1.2272.1.100.5.1.49 | Columnrc2kBootConfigEnableUrpfMode | read-write | current | From VOSS5.x onwards, unicast reverse path forwarding will be supported on small system platforms only if this flag is enabled. |
| 1.3.6.1.4.1.2272.1.100.5.1.50 | Columnrc2kBootConfigEnableFlowControlMode | read-write | current | Enable/disable Flow Control Mode Flag. |
| 1.3.6.1.4.1.2272.1.100.5.1.51 | Columnrc2kBootConfigAdvancedFeatureBwReservation | read-write | current | Allow to enable the port forwarding bandwidth working as loopback ports to support advanced feature mode, or disable the reservation for full port mode. Enable… |
| 1.3.6.1.4.1.2272.1.100.5.1.52 | Columnrc2kBootConfigEnableVxlanGwFullInterworkingMode | read-write | current | Enables vxlan gateway full interworking mode. |
| 1.3.6.1.4.1.2272.1.100.5.1.53 | Columnrc2kBootConfigNniMstp | read-write | current | Flag to decide whether configuration of mstp and other vlans on the NNI is allowed. Default is not allowed. |
| 1.3.6.1.4.1.2272.1.100.5.1.54 | Columnrc2kBootConfigEnableDvrLeafMode | read-write | current | DVR can be configured as controller or leaf. IP related configuration and show commands are not allowed on leaf. dvr-leaf-mode flag has to be enabled first bef… |
| 1.3.6.1.4.1.2272.1.100.5.1.55 | Columnrc2kBootConfigEnablevrfScaling | read-write | current | Flag to Enable or Disable vrf scaling. |
| 1.3.6.1.4.1.2272.1.100.5.1.56 | Columnrc2kBootConfigLinerateDirectedBroadcast | read-write | current | Flag to Enable or Disable Linerate Directed Broadcast. With this flag set, IP directed broadcast will operate at linerate. Without this flag, all IP directed b… |
| 1.3.6.1.4.1.2272.1.100.5.1.57 | Columnrc2kBootConfigVcMode | read-write | current | Flag to Enable or Disable Virtual Chassis mode. |
| 1.3.6.1.4.1.2272.1.100.5.1.58 | Columnrc2kBootConfigEnableIpv6EgressFilterMode | read-write | current | Flag to enable or disable the IPV6 egress filter |
| 1.3.6.1.4.1.2272.1.100.5.1.59 | Columnrc2kBootConfigEnableSyslogRfc5424Format | read-write | current | Flag to enable or disable the syslog output format. Enable will align syslog format with RFC 5424. |
| 1.3.6.1.4.1.2272.1.100.5.1.60 | Columnrc2kBootConfigEnableFactoryDefaultsMode | read-write | current | Set Factory default boot wiht option. This object is used to deprecate and obsolete the rc2kBootConfigEnableFactoryDefaults disable(1): System boot up with no … |
| 1.3.6.1.4.1.2272.1.100.5.1.61 | Columnrc2kBootConfigInsightPortConnectType | read-write | current | This object indicates the desired insight port connect type of the system. The valid values are: vtd(1) ovs-sriov(2) Note that changing the insight port connec… |
| 1.3.6.1.4.1.2272.1.100.6 | Tablerc2kCardTable | not-accessible | current | 2k Card table |
| 1.3.6.1.4.1.2272.1.100.6.1 | Rowrc2kCardEntry | not-accessible | current | Entry containing information of 2k Card |
| 1.3.6.1.4.1.2272.1.100.6.1.1 | Columnrc2kCardIndex | read-only | current | slot number. |
| 1.3.6.1.4.1.2272.1.100.6.1.2 | Columnrc2kCardFrontType | read-only | current | Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: Exa… |
| 1.3.6.1.4.1.2272.1.100.6.1.3 | Columnrc2kCardFrontDescription | read-only | current | description |
| 1.3.6.1.4.1.2272.1.100.6.1.4 | Columnrc2kCardFrontAdminStatus | read-write | current | Used to indicate the administrative status of this card |
| 1.3.6.1.4.1.2272.1.100.6.1.5 | Columnrc2kCardFrontOperStatus | read-only | current | Used to indicate the operational status of this card. |
| 1.3.6.1.4.1.2272.1.100.6.1.6 | Columnrc2kCardFrontSerialNum | read-only | current | serial number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.7 | Columnrc2kCardFrontHwVersion | read-only | current | hardware version |
| 1.3.6.1.4.1.2272.1.100.6.1.8 | Columnrc2kCardFrontPartNumber | read-only | current | part number |
| 1.3.6.1.4.1.2272.1.100.6.1.9 | Columnrc2kCardFrontDateCode | read-only | current | date code |
| 1.3.6.1.4.1.2272.1.100.6.1.10 | Columnrc2kCardFrontDeviations | read-only | current | deviations |
| 1.3.6.1.4.1.2272.1.100.6.1.11 | Columnrc2kCardFrontMacAddr | read-only | obsolete | base mac address |
| 1.3.6.1.4.1.2272.1.100.6.1.12 | Columnrc2kCardBackType | read-only | current | Refer to rc2kCardFrontType for the encoding scheme |
| 1.3.6.1.4.1.2272.1.100.6.1.13 | Columnrc2kCardBackDescription | read-only | current | description |
| 1.3.6.1.4.1.2272.1.100.6.1.14 | Columnrc2kCardBackSerialNum | read-only | current | serial number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.15 | Columnrc2kCardBackHwVersion | read-only | current | hardware version |
| 1.3.6.1.4.1.2272.1.100.6.1.16 | Columnrc2kCardBackPartNumber | read-only | current | part number |
| 1.3.6.1.4.1.2272.1.100.6.1.17 | Columnrc2kCardBackDateCode | read-only | current | date code |
| 1.3.6.1.4.1.2272.1.100.6.1.18 | Columnrc2kCardBackDeviations | read-only | current | deviations |
| 1.3.6.1.4.1.2272.1.100.6.1.19 | Columnrc2kCardPCMCIAType | read-only | current | Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set t… |
| 1.3.6.1.4.1.2272.1.100.6.1.20 | Columnrc2kCardPCMCIADescr | read-only | current | PCMCIA descriptor |
| 1.3.6.1.4.1.2272.1.100.6.1.21 | Columnrc2kCardASICDescr | read-only | current | ASIC descriptor |
| 1.3.6.1.4.1.2272.1.100.6.1.22 | Columnrc2kCardFrontMasterIO | read-only | current | Used to indicate whether an IO card in a 8100 device is operating in the 'master' mode. This variable is not meaningful for non-IO cards and non-8100 devices. |
| 1.3.6.1.4.1.2272.1.100.6.1.23 | Columnrc2kCardSmltOnSingleCpSupported | read-only | current | Used to indicate whether an IO card is updated to support SMLT on single Cp feature or not. |
| 1.3.6.1.4.1.2272.1.100.6.1.24 | Columnrc2kCardMezzCard | read-only | current | Used to indicate the CPU Mezz card |
| 1.3.6.1.4.1.2272.1.100.6.1.25 | Columnrc2kCardFrontPoeOperStatus | read-only | current | Used to indicate the operational status of this card. |
| 1.3.6.1.4.1.2272.1.100.6.1.26 | Columnrc2kCardMezzSerialNum | read-only | current | Used to get the serial number of the mezz |
| 1.3.6.1.4.1.2272.1.100.6.1.27 | Columnrc2kCardMezzHwVersion | read-only | current | Used to get the HW version of the mezz. The value of HW Version corresponds to the value of part number. |
| 1.3.6.1.4.1.2272.1.100.6.1.28 | Columnrc2kCardMezzPartNum | read-only | current | Used to get the part number of the mezz. The value of part number corresponds to the value of HW Version. |
| 1.3.6.1.4.1.2272.1.100.6.1.29 | Columnrc2kCardSlotPriority | read-write | current | Used to indicate the priority of the slot for power management.It will take effect only after reboot. |
| 1.3.6.1.4.1.2272.1.100.6.1.30 | Columnrc2kCardSlotOriginalPriority | read-only | current | Priority of the slot for power management which the swtich has currently booted with. It will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.100.6.1.31 | Columnrc2kCardMode | read-write | current | Used to indicate the single port or dual port is using |
| 1.3.6.1.4.1.2272.1.100.6.1.32 | Columnrc2kCardSlotPower | read-write | current | Administrately turn on or off power on this slot. it only applicable on Standby CP & IO and SF Card |
| 1.3.6.1.4.1.2272.1.100.6.1.33 | Columnrc2kCardModuleSerialNum | read-only | current | Module serial number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| 1.3.6.1.4.1.2272.1.100.6.1.34 | Columnrc2kCardModulePartNumber | read-only | current | Module part number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| 1.3.6.1.4.1.2272.1.100.6.1.35 | Columnrc2kCardModuleAssemblyDate | read-only | current | Module assemly date. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| 1.3.6.1.4.1.2272.1.100.7 | Noderc2kCopyFile | |||
| 1.3.6.1.4.1.2272.1.100.7.1 | Scalarrc2kCopyFileSource | read-write | current | source file |
| 1.3.6.1.4.1.2272.1.100.7.2 | Scalarrc2kCopyFileDestination | read-write | current | dest file |
| 1.3.6.1.4.1.2272.1.100.7.3 | Scalarrc2kCopyFileAction | read-write | current | start or cancell |
| 1.3.6.1.4.1.2272.1.100.7.4 | Scalarrc2kCopyFileResult | read-only | current | result |
| 1.3.6.1.4.1.2272.1.100.8 | Noderc2kQos | |||
| 1.3.6.1.4.1.2272.1.100.9 | Noderc2kAtm | |||
| 1.3.6.1.4.1.2272.1.100.10 | Tablerc2kMdaCardTable | not-accessible | current | Mda card table |
| 1.3.6.1.4.1.2272.1.100.10.1 | Rowrc2kMdaCardEntry | not-accessible | current | Entry containing infomation of Mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.1 | Columnrc2kMdaCardSlotNum | read-only | current | Slot number |
| 1.3.6.1.4.1.2272.1.100.10.1.2 | Columnrc2kMdaCardMdaNum | read-only | current | MDA number within slot. MDAs are numbered from left to right. |
| 1.3.6.1.4.1.2272.1.100.10.1.3 | Columnrc2kMdaCardType | read-only | current | Refer to rc2kCardFrontType for the encoding scheme |
| 1.3.6.1.4.1.2272.1.100.10.1.4 | Columnrc2kMdaCardDescription | read-only | current | description of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.5 | Columnrc2kMdaCardAdminStatus | read-write | current | administration status of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.6 | Columnrc2kMdaCardOperStatus | read-only | current | operation status of mda card. |
| 1.3.6.1.4.1.2272.1.100.10.1.7 | Columnrc2kMdaCardSerialNum | read-only | current | serial number of mad card |
| 1.3.6.1.4.1.2272.1.100.10.1.8 | Columnrc2kMdaCardHwVersion | read-only | current | hardware version of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.9 | Columnrc2kMdaCardPartNumber | read-only | current | part number of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.10 | Columnrc2kMdaCardDateCode | read-only | current | date code of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.11 | Columnrc2kMdaCardDeviations | read-only | current | hardware deviation infomation of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.12 | Columnrc2kMdaCardMacAddr | read-only | current | base mac address of mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.13 | Columnrc2kMdaCardNumPorts | read-only | current | number of ports on mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.14 | Columnrc2kMdaCardFirstIfIndex | read-only | current | first ifindex number on mda card |
| 1.3.6.1.4.1.2272.1.100.10.1.15 | Columnrc2kMdaCardLastIfIndex | read-only | current | last ifindex number on mda card |
| 1.3.6.1.4.1.2272.1.100.11 | Tablerc2kCpuEthernetPortRouteTable | not-accessible | current | 2k CPU Ethernet Port Route table |
| 1.3.6.1.4.1.2272.1.100.11.1 | Rowrc2kCpuEthernetPortRouteEntry | not-accessible | current | Entry containing infomation of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.11.1.1 | Columnrc2kCpuEthernetPortRouteNetwork | read-write | current | Used to configure the network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.11.1.2 | Columnrc2kCpuEthernetPortRouteGateway | read-write | current | Used to configure the the IP address of the gateway that should be used to forward IP traffic. |
| 1.3.6.1.4.1.2272.1.100.11.1.3 | Columnrc2kCpuEthernetPortRouteRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.12 | Noderc2kCPUTypeGeneralGroup | |||
| 1.3.6.1.4.1.2272.1.100.12.1 | Scalarrc2kCPUTypePrimary | read-only | current | This enum type will distinguish one CPU type from the other. |
| 1.3.6.1.4.1.2272.1.100.12.2 | Scalarrc2kCPUTypeSecondary | read-only | current | This type will distinguish one Secondary CPU type from the other. |
| 1.3.6.1.4.1.2272.1.100.12.3 | Scalarrc2kCPUTypePrimaryMemory | read-only | current | This gives the memory size of the Primary CPU type. |
| 1.3.6.1.4.1.2272.1.100.12.4 | Scalarrc2kCPUTypeSecondaryMemory | read-only | current | This gives the memory size of the Secondary CPU type. |
| 1.3.6.1.4.1.2272.1.100.13 | Tablerc2kCpuEthernetPortIpv6RouteTable | not-accessible | current | 2k CPU Ethernet Port Route table for Ipv6 |
| 1.3.6.1.4.1.2272.1.100.13.1 | Rowrc2kCpuEthernetPortIpv6RouteEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port Ipv6 |
| 1.3.6.1.4.1.2272.1.100.13.1.1 | Columnrc2kCpuEthernetPortIpv6RouteNetwork | not-accessible | current | Used to configure the ipv6 network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.13.1.2 | Columnrc2kCpuEthernetPortIpv6RoutePrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.2272.1.100.13.1.3 | Columnrc2kCpuEthernetPortIpv6RouteGateway | not-accessible | current | Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic. |
| 1.3.6.1.4.1.2272.1.100.13.1.4 | Columnrc2kCpuEthernetPortIpv6RouteRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.2272.1.100.14 | Tablerc2kCardModTable | not-accessible | current | RTM info table |
| 1.3.6.1.4.1.2272.1.100.14.1 | Rowrc2kCardModEntry | not-accessible | current | Entry containing RTM information |
| 1.3.6.1.4.1.2272.1.100.14.1.1 | Columnrc2kCardModIndex | not-accessible | current | slot number. |
| 1.3.6.1.4.1.2272.1.100.14.1.2 | Columnrc2kCardModPresent | read-only | current | Indicates if the RTM in this slot is present |
| 1.3.6.1.4.1.2272.1.100.14.1.3 | Columnrc2kCardModType | read-only | current | RTM type |
| 1.3.6.1.4.1.2272.1.100.14.1.4 | Columnrc2kCardModDescription | read-only | current | RTM description |
| 1.3.6.1.4.1.2272.1.100.14.1.5 | Columnrc2kCardModSerialNum | read-only | current | RTM serial number |
| 1.3.6.1.4.1.2272.1.100.14.1.6 | Columnrc2kCardModHwVersion | read-only | current | RTM hardware version |
| 1.3.6.1.4.1.2272.1.100.14.1.7 | Columnrc2kCardModPartNumber | read-only | current | RTM part number |
| 1.3.6.1.4.1.2272.1.100.14.1.8 | Columnrc2kCardModDateCode | read-only | current | RTM date code |
| 1.3.6.1.4.1.2272.1.100.14.1.9 | Columnrc2kCardModDeviations | read-only | current | RTM deviations |
| 1.3.6.1.4.1.2272.1.100.14.1.10 | Columnrc2kCardModCpldId | read-only | current | RTM CPLD ID value |
| 1.3.6.1.4.1.2272.1.100.14.1.11 | Columnrc2kCardModCpldRev | read-only | current | RTM CPLD revision value |
| 1.3.6.1.4.1.2272.1.100.15 | Tablerc2kCardPerfTable | not-accessible | current | This table represents the Card/Slot level DRAM size, DRAM Used, DRAM Free and CPU Utilization for the R Module and RC Module cards |
| 1.3.6.1.4.1.2272.1.100.15.1 | Rowrc2kCardPerfEntry | not-accessible | current | Entry containing information of Card performance |
| 1.3.6.1.4.1.2272.1.100.15.1.1 | Columnrc2kCardPerfId | not-accessible | current | This represents the slot number. This is only for line cards, slot 5 and 6 should not be used. |
| 1.3.6.1.4.1.2272.1.100.15.1.2 | Columnrc2kCardPerfDramSize | read-only | current | This represents DRAM Size in Mega bytes |
| 1.3.6.1.4.1.2272.1.100.15.1.3 | Columnrc2kCardPerfDramUsed | read-only | current | This represents the amount of DRAM used in kilo bytes |
| 1.3.6.1.4.1.2272.1.100.15.1.4 | Columnrc2kCardPerfDramFree | read-only | current | This represents the amount of DRAM Free in kilo bytes |
| 1.3.6.1.4.1.2272.1.100.15.1.5 | Columnrc2kCardPerfCPUUtilization | read-only | current | This represents the percentage of CPU utilization |
| 1.3.6.1.4.1.2272.1.100.16 | Tablerc2kSysAggrRateLimiterStatsTable | not-accessible | current | This table represents the Card/Slot level Aggregate rate limiter stats for power ranger cards. |
| 1.3.6.1.4.1.2272.1.100.16.1 | Rowrc2kSysAggrRateLimiterStatsEntry | not-accessible | current | Card/Slot level Aggregate rate limiter stats for power ranger cards indexed by slot number |
| 1.3.6.1.4.1.2272.1.100.16.1.1 | Columnrc2kSysAggrRateLimiterStatsId | not-accessible | current | This represents the slot number. This is only for line cards, slot 5 and 6 should not be used. |
| 1.3.6.1.4.1.2272.1.100.16.1.2 | Columnrc2kSysAggrRateLimiterIngGreenLane0 | read-only | current | Number of packets passed or marked green by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.3 | Columnrc2kSysAggrRateLimiterIngRedLane0 | read-only | current | Number of packets dropped or marked red by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.4 | Columnrc2kSysAggrRateLimiterEgrGreenLane0 | read-only | current | Number of packets passed or marked green by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.5 | Columnrc2kSysAggrRateLimiterEgrRedLane0 | read-only | current | Number of packets dropped or marked red by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.6 | Columnrc2kSysAggrRateLimiterIngGreenLane1 | read-only | current | Number of packets passed or marked green by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.7 | Columnrc2kSysAggrRateLimiterIngRedLane1 | read-only | current | Number of packets dropped or marked red by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.8 | Columnrc2kSysAggrRateLimiterEgrGreenLane1 | read-only | current | Number of packets passed or marked green by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.9 | Columnrc2kSysAggrRateLimiterEgrRedLane1 | read-only | current | Number of packets dropped or marked red by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.10 | Columnrc2kSysAggrRateLimiterIngGreenLane2 | read-only | current | Number of packets passed or marked green by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.11 | Columnrc2kSysAggrRateLimiterIngRedLane2 | read-only | current | Number of packets dropped or marked red by the Ingress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.12 | Columnrc2kSysAggrRateLimiterEgrGreenLane2 | read-only | current | Number of packets passed or marked green by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.13 | Columnrc2kSysAggrRateLimiterEgrRedLane2 | read-only | current | Number of packets dropped or marked red by the Egress Aggregate rate limiter |
| 1.3.6.1.4.1.2272.1.100.16.1.14 | Columnrc2kSysAggrRateLimiterStatsClear | read-write | current | Clear the Aggregate Rate limiter Stats |
| 1.3.6.1.4.1.2272.1.100.17 | Tablerc2kPowerConsumptionInfoTable | not-accessible | current | Power consumption info table for all slots |
| 1.3.6.1.4.1.2272.1.100.17.1 | Rowrc2kPowerConsumptionInfoEntry | not-accessible | current | Entry containing power consumption information of the slot |
| 1.3.6.1.4.1.2272.1.100.17.1.1 | Columnrc2kPowerConsumptionInfoIndex | not-accessible | current | Slot number. |
| 1.3.6.1.4.1.2272.1.100.17.1.2 | Columnrc2kPowerConsumptionInfoPowerStatus | read-only | current | Power operation status of this slot |
| 1.3.6.1.4.1.2272.1.100.17.1.3 | Columnrc2kPowerConsumptionInfoBasePower | read-only | current | The base power required for this slot |
| 1.3.6.1.4.1.2272.1.100.17.1.4 | Columnrc2kPowerConsumptionInfoConsumedPower | read-only | current | The actual consumed power of this slot. Value will be set zero when Power status is 'off' rc2kPowerConsumptionInfoPowerStatus |
| 1.3.6.1.4.1.2272.1.100.17.1.5 | Columnrc2kPowerConsumptionInfoPowerPriority | read-only | current | Used to indicate the priority of the slot for power management |
| 1.3.6.1.4.1.2272.1.100.17.1.6 | Columnrc2kPowerConsumptionInfoSlotDescription | read-only | current | User to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc |
| 1.3.6.1.4.1.2272.1.100.17.1.7 | Columnrc2kPowerConsumptionInfoCardDescription | read-only | current | Hardware description of this card |
| 1.3.6.1.4.1.2272.1.100.18 | Tablerc2kTemperatureTable | not-accessible | current | Table for retrieving the temperatures of each card (CP, IO, SF) on the chassis |
| 1.3.6.1.4.1.2272.1.100.18.1 | Rowrc2kTemperatureEntry | not-accessible | current | Contains information regarding the temperature of each slot (CP, IO and SF) on the chassis. |
| 1.3.6.1.4.1.2272.1.100.18.1.1 | Columnrc2kTemperatureSlotIndex | not-accessible | current | Slot number of either a CP (1,2) or IO (3-12) or SF (21-26). |
| 1.3.6.1.4.1.2272.1.100.18.1.2 | Columnrc2kTemperatureSlotDescription | read-only | current | Used to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc. |
| 1.3.6.1.4.1.2272.1.100.18.1.3 | Columnrc2kTemperatureZone1Temperature | read-only | current | Zone 1 temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.4 | Columnrc2kTemperatureZone2Temperature | read-only | current | Zone 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 2 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.5 | Columnrc2kTemperatureZone3Temperature | read-only | current | Zone 3 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 3 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.6 | Columnrc2kTemperatureZone4Temperature | read-only | current | Zone 4 temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.7 | Columnrc2kTemperatureZone5Temperature | read-only | current | Zone 5 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 5 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.8 | Columnrc2kTemperatureHighTemperature | read-only | current | Highest temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.9 | Columnrc2kTemperatureLowTemperature | read-only | current | Lowest temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.10 | Columnrc2kTemperatureAlarmThreshold | read-only | current | When the card temperature crosses this threshold, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.18.1.11 | Columnrc2kTemperatureShutdownThreshold | read-only | current | When the card temperature crosses this threshold, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.100.19 | Tablerc2kUsbTable | not-accessible | current | Table for retrieving the data for the USBs inserted on the chassis |
| 1.3.6.1.4.1.2272.1.100.19.1 | Rowrc2kUsbEntry | not-accessible | current | Contains information regarding the data for USBs inserted on the chassis |
| 1.3.6.1.4.1.2272.1.100.19.1.1 | Columnrc2kUsbSlotIndex | not-accessible | current | Slot number of CP in which USB is inserted. |
| 1.3.6.1.4.1.2272.1.100.19.1.2 | Columnrc2kUsbSlotDescription | read-only | current | Used to indicate the slot type information. Such as, 'Slot1'..'Slot2. |
| 1.3.6.1.4.1.2272.1.100.19.1.3 | Columnrc2kUsbVendorId | read-only | current | Indicates the Vendor Id for the inserted USB. Value is assigned by USB-IF. |
| 1.3.6.1.4.1.2272.1.100.19.1.4 | Columnrc2kUsbManufacturer | read-only | current | Indicates the Manufacturer for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.5 | Columnrc2kUsbProductId | read-only | current | Indicates the Product Id for the inserted USB. Value is assigned by manufacturer. |
| 1.3.6.1.4.1.2272.1.100.19.1.6 | Columnrc2kUsbProductName | read-only | current | Indicates the Product Name for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.7 | Columnrc2kUsbSerialNumber | read-only | current | Indicates the Serial Number for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.8 | Columnrc2kUsbRevision | read-only | current | Indicates the release number for the inserted USB. |
| 1.3.6.1.4.1.2272.1.100.19.1.9 | Columnrc2kUsbMaxCurrent | read-only | current | Returns the Max Power as defined by specification for the inserted USB. The units are milliamps. |
| 1.3.6.1.4.1.2272.1.100.20 | Tablerc2kCardAsicInfoTable | not-accessible | current | A table that contains asic information that is specific to a forwarding slice on a second generation IO module. |
| 1.3.6.1.4.1.2272.1.100.20.1 | Rowrc2kCardAsicInfoEntry | not-accessible | current | Second Generation Card attributes |
| 1.3.6.1.4.1.2272.1.100.20.1.1 | Columnrc2kCardAsicInfoIndex | not-accessible | current | A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 3 to the… |
| 1.3.6.1.4.1.2272.1.100.20.1.2 | Columnrc2kCardAsicInfoForwardingSlice | not-accessible | current | A unique value for each forwarding slice on the card. |
| 1.3.6.1.4.1.2272.1.100.20.1.3 | Columnrc2kCardAsicInfoQE | read-only | current | QE version for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.20.1.4 | Columnrc2kCardAsicInfoZagrosFpga | read-only | current | Zagros FPGA for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.20.1.5 | Columnrc2kCardAsicInfoRsp | read-only | current | RSP for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.20.1.6 | Columnrc2kCardAsicInfoPhyRev | read-only | current | PHY revision for the forwarding slice on IO card |
| 1.3.6.1.4.1.2272.1.100.21 | Tablerc2kIoCardTemperatureTable | not-accessible | current | Table for retrieving the temperatures of the sensors located on the FPGA's and FA's on the generation 2 IO cards. |
| 1.3.6.1.4.1.2272.1.100.21.1 | Rowrc2kIoCardTemperatureEntry | not-accessible | current | Contains information regarding the temperatures of FPGA's and FA's on the generation 2 IO cards. |
| 1.3.6.1.4.1.2272.1.100.21.1.1 | Columnrc2kIoCardTemperatureSlotIndex | not-accessible | current | Slot number of the IO card |
| 1.3.6.1.4.1.2272.1.100.21.1.2 | Columnrc2kIoCardTemperatureFPGASensor1Temperature | read-only | current | Temperature of the FPGA Sensor 1, located on the Zagros on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.3 | Columnrc2kIoCardTemperatureFPGASensor2Temperature | read-only | current | Temperature of the FPGA Sensor 2, located on the Zagros on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.4 | Columnrc2kIoCardTemperatureFPGASensor3Temperature | read-only | current | Temperature of the FPGA Sensor 3, located on the RSP on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sens… |
| 1.3.6.1.4.1.2272.1.100.21.1.5 | Columnrc2kIoCardTemperatureFPGASensor4Temperature | read-only | current | Temperature of the FPGA Sensor 4, located on the Zagros on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this … |
| 1.3.6.1.4.1.2272.1.100.21.1.6 | Columnrc2kIoCardTemperatureFPGASensor5Temperature | read-only | current | Temperature of the FPGA Sensor 5, located on the Zagros on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this … |
| 1.3.6.1.4.1.2272.1.100.21.1.7 | Columnrc2kIoCardTemperatureFPGASensor6Temperature | read-only | current | Temperature of the FPGA Sensor 6, located on the RSP on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sen… |
| 1.3.6.1.4.1.2272.1.100.21.1.8 | Columnrc2kIoCardTemperatureFPGASensor7Temperature | read-only | current | Temperature of the FPGA Sensor 7, located on the Zagros on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.9 | Columnrc2kIoCardTemperatureFPGASensor8Temperature | read-only | current | Temperature of the FPGA Sensor 8, located on the Zagros on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this s… |
| 1.3.6.1.4.1.2272.1.100.21.1.10 | Columnrc2kIoCardTemperatureFPGASensor9Temperature | read-only | current | Temperature of the FPGA Sensor 9, located on the RSP on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sens… |
| 1.3.6.1.4.1.2272.1.100.21.1.11 | Columnrc2kIoCardTemperatureFPGAZoneHighTemperature | read-only | current | Highest temperature of all the FPGA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.12 | Columnrc2kIoCardTemperatureFPGAZoneLowTemperature | read-only | current | Lowest temperature of all the FPGA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.13 | Columnrc2kIoCardTemperatureFPGAZoneAlarmThreshold | read-only | current | When the FPGA temperature crosses this threshold on this IO card, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.21.1.14 | Columnrc2kIoCardTemperatureFPGAZoneShutdownThreshold | read-only | current | When the FPGA temperature crosses this threshold on this IO card, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.100.21.1.15 | Columnrc2kIoCardTemperatureFASensor1Temperature | read-only | current | Temperature of the FA Sensor 1, located on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not ava… |
| 1.3.6.1.4.1.2272.1.100.21.1.16 | Columnrc2kIoCardTemperatureFASensor2Temperature | read-only | current | Temperature of the FA Sensor 2, located on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not av… |
| 1.3.6.1.4.1.2272.1.100.21.1.17 | Columnrc2kIoCardTemperatureFASensor3Temperature | read-only | current | Temperature of the FA Sensor 3, located on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not ava… |
| 1.3.6.1.4.1.2272.1.100.21.1.18 | Columnrc2kIoCardTemperatureFAZoneHighTemperature | read-only | current | Highest temperature of all the FA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.19 | Columnrc2kIoCardTemperatureFAZoneLowTemperature | read-only | current | Lowest temperature of all the FA sensors located on this IO card, measured in celsius degrees. |
| 1.3.6.1.4.1.2272.1.100.21.1.20 | Columnrc2kIoCardTemperatureFAZoneAlarmThreshold | read-only | current | When the FA temperature crosses this threshold on this IO card, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.21.1.21 | Columnrc2kIoCardTemperatureFAZoneShutdownThreshold | read-only | current | When the FA temperature crosses this threshold on this IO card, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.100.22 | Tablerc2kBootConfigHostTable | not-accessible | current | Table for the bootconfig host info on the device |
| 1.3.6.1.4.1.2272.1.100.22.1 | Rowrc2kBootConfigHostEntry | not-accessible | current | Entry containing boot config host information. |
| 1.3.6.1.4.1.2272.1.100.22.1.1 | Columnrc2kBootConfigHostSlot | read-only | current | slot number, VSP uses 1,2 |
| 1.3.6.1.4.1.2272.1.100.22.1.2 | Columnrc2kBootConfigHostTftpHash | read-write | current | Enables tftp hashing |
| 1.3.6.1.4.1.2272.1.100.22.1.3 | Columnrc2kBootConfigHostTftpRetransmit | read-write | current | Set tftp retransmit timeout counter |
| 1.3.6.1.4.1.2272.1.100.22.1.4 | Columnrc2kBootConfigHostTftpTimeout | read-write | current | Set tftp timeout counter |
| 1.3.6.1.4.1.2272.1.100.22.1.5 | Columnrc2kBootConfigHostUser | read-write | current | Configure host user |
| 1.3.6.1.4.1.2272.1.100.22.1.6 | Columnrc2kBootConfigHostPassword | read-write | current | Configure host password |