RC-BFD-TMP-MIB
57 objects
This MIB module is a duplicate of Bidirectional Forwarding Detection Management Information Base draft-ietf-bfd-mib-03.txt. The object names and OIDs may be different from the draft.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| RAPID-CITY | rcBfd |
| RC-VRF-MIB | VrfIdentifier |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.81.1 | IdentityrcBfdTmpMib | This MIB module is a duplicate of Bidirectional Forwarding Detection Management Information Base draft-ietf-bfd-mib-03.txt. The object names and OIDs may be di… | ||
| 1.3.6.1.4.1.2272.1.81.1.0 | NodercBfdTmpNotifications | |||
| 1.3.6.1.4.1.2272.1.81.1.0.1 | NotificationrcBfdTmpSessUp | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the up(2) state from some oth… | |
| 1.3.6.1.4.1.2272.1.81.1.0.2 | NotificationrcBfdTmpSessDown | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the down(4) or adminDown(5) s… | |
| 1.3.6.1.4.1.2272.1.81.1.1 | NodercBfdTmpObjects | |||
| 1.3.6.1.4.1.2272.1.81.1.1.1 | NodercBfdTmpScalarObjects | |||
| 1.3.6.1.4.1.2272.1.81.1.1.1.1 | ScalarrcBfdTmpAdminStatus | read-write | current | The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disabl… |
| 1.3.6.1.4.1.2272.1.81.1.1.1.3 | ScalarrcBfdTmpVersionNumber | read-only | current | The current version number of the BFD protocol. |
| 1.3.6.1.4.1.2272.1.81.1.1.1.4 | ScalarrcBfdTmpSessNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of bfdSessUp and bfdSessDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.2272.1.81.1.1.2 | TablercBfdTmpSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1 | RowrcBfdTmpSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.1 | ColumnrcBfdTmpSessIndex | not-accessible | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.2 | ColumnrcBfdTmpSessApplicationId | read-only | current | This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a … |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.3 | ColumnrcBfdTmpSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.4 | ColumnrcBfdTmpSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.5 | ColumnrcBfdTmpSessUdpPort | read-create | current | The UDP Port for BFD. The default value is the well-known value for this port. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.6 | ColumnrcBfdTmpSessState | read-only | current | The perceived state of the BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.7 | ColumnrcBfdTmpSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.8 | ColumnrcBfdTmpSessDiag | accessible-for-notify | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.9 | ColumnrcBfdTmpSessOperMode | read-only | current | This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of AsynchModeWOEchoFun(2) ... A valu… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.10 | ColumnrcBfdTmpSessDemandModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.11 | ColumnrcBfdTmpSessEchoFuncModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.12 | ColumnrcBfdTmpSessControlPlanIndepFlag | read-create | current | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if … |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.13 | ColumnrcBfdTmpSessAddrType | read-create | current | This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.14 | ColumnrcBfdTmpSessAddr | read-create | current | This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The value is se… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.15 | ColumnrcBfdTmpSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.16 | ColumnrcBfdTmpSessReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.17 | ColumnrcBfdTmpSessReqMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.18 | ColumnrcBfdTmpSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.19 | ColumnrcBfdTmpSessStorType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.20 | ColumnrcBfdTmpSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.21 | ColumnrcBfdTmpSessAuthPresFlag | read-create | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.22 | ColumnrcBfdTmpSessAuthenticationType | read-create | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.23 | ColumnrcBfdTmpSessDestAddr | read-only | current | This object specifies destination IP address of the interface associated with this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.24 | ColumnrcBfdTmpSessOldState | read-only | current | The old state of the BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.25 | ColumnrcBfdTmpSessVrfId | read-create | current | Indicates the Virtual Router to which the IPv4 BFD session belongs. |
| 1.3.6.1.4.1.2272.1.81.1.1.2.1.26 | ColumnrcBfdTmpSessVrfName | read-only | current | The Name of the Virtual Router to which the IPv4 BFD session belongs. |
| 1.3.6.1.4.1.2272.1.81.1.1.3 | TablercBfdTmpSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1 | RowrcBfdTmpSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. bfdCounterDiscontinuityTime is used to indicate potential discontinuity for all … |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.1 | ColumnrcBfdTmpSessPerfPktIn | read-only | current | The total number of BFD messages received for this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.2 | ColumnrcBfdTmpSessPerfPktOut | read-only | current | The total number of BFD messages sent for this BFD session. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.3 | ColumnrcBfdTmpSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.4 | ColumnrcBfdTmpSessPerfLastSessDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.5 | ColumnrcBfdTmpSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.6 | ColumnrcBfdTmpSessPerfSessUpCount | read-only | current | The number of times this session has gone into the Up state since the router last rebooted. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.7 | ColumnrcBfdTmpSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.8 | ColumnrcBfdTmpSessPerfPktInHC | read-only | current | This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if … |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.9 | ColumnrcBfdTmpSessPerfPktOutHC | read-only | current | This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of b… |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.10 | ColumnrcBfdTmpSessPerfClearStats | read-write | current | Used to clear BFD stats for a VRF. This will display always false when retrieved through SNMP Get. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.11 | ColumnrcBfdTmpSessPerfVrfId | read-write | current | Indicates the Virtual Router to which the BFD instance belongs. |
| 1.3.6.1.4.1.2272.1.81.1.1.3.1.12 | ColumnrcBfdTmpSessPerfVrfName | read-only | current | The Name of the Virtual Router to which the BFD instance belongs. |
| 1.3.6.1.4.1.2272.1.81.1.1.4 | TablercBfdTmpSessMapTable | not-accessible | current | The BFD Session Mapping Table maps the complex indexing of the BFD sessions to the flat BFDIndex used in the BfdSessionTable. Implementors need to be aware tha… |
| 1.3.6.1.4.1.2272.1.81.1.1.4.1 | RowrcBfdTmpSessMapEntry | not-accessible | current | The BFD Session Entry describes BFD session that is mapped to this index. Implementors need to be aware that if the value of the mplsInSegmentMapLabelPtrIndex … |
| 1.3.6.1.4.1.2272.1.81.1.1.4.1.1 | ColumnrcBfdTmpSessMapBfdIndex | read-only | current | This object specifies the BfdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RcBfdTmpDiag | INTEGER { noDiagnostic(1), controlDetectionTimeExpired(2), echoFunctionFailed(3), neighborSignaledSessionDown(4), forwardingPlaneReset(5), pathDown(6), concatenatedPathDown(7), administrativelyDown(8), reverseConcatenatedPathDown (9) } | current | A common BFD diagnostic code. |
| RcBfdTmpInterval | Unsigned32 (1..4294967295) | current | The BFD interval delay in microseconds. |
| RcBfdTmpSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |