RC-CFM-MIB
474 objects
OE MIB for Connectivity Fault Management
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | VlanIdOrNone |
| RAPID-CITY | CfmNameString EnableValue rcCfm |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.69.18.1.10 | IdentityrcCfmMib | OE MIB for Connectivity Fault Management | ||
| 1.3.6.1.4.1.2272.1.69.18.1.11 | ScalarrcCfmTransmitLtmSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.18.1.12 | ScalarrcCfmTransmitLtmResultOk | read-only | current | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.18.1.13 | ScalarrcCfmTransmitLtmStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.… |
| 1.3.6.1.4.1.2272.1.69.18.1.14 | ScalarrcCfmTransmitLtmResult | read-only | obsolete | Display the LTM result. |
| 1.3.6.1.4.1.2272.1.69.18.1.15 | ScalarrcCfmTransmitLtmFlag | read-only | current | LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote … |
| 1.3.6.1.4.1.2272.1.69.18.1.16 | ScalarrcCfmTransmitLtmSourceMode | read-write | current | Source modes of the transmit linktrace service. |
| 1.3.6.1.4.1.2272.1.69.19 | TablercCfmPbtTrunkStatsTable | not-accessible | current | Table of PBT trunk statistics. |
| 1.3.6.1.4.1.2272.1.69.19.1 | RowrcCfmPbtTrunkStatsEntry | not-accessible | current | A PBT Trunk Statistics table entry. |
| 1.3.6.1.4.1.2272.1.69.19.1.1 | ColumnrcCfmPbtTrunkStatsName | not-accessible | current | PBT Trunk Name. |
| 1.3.6.1.4.1.2272.1.69.19.1.2 | ColumnrcCfmPbtTrunkStatsPort | read-only | current | PBT Trunk Port |
| 1.3.6.1.4.1.2272.1.69.19.1.3 | ColumnrcCfmPbtTrunkStatsDA | read-only | current | Trunk Mac (remote CP mac) |
| 1.3.6.1.4.1.2272.1.69.19.1.4 | ColumnrcCfmPbtTrunkStatsVlanId | read-only | current | PBT trunk VLAN ID |
| 1.3.6.1.4.1.2272.1.69.19.1.5 | ColumnrcCfmPbtTrunkStatsRevVlanId | read-only | current | PBT trunk reverse VLAN ID |
| 1.3.6.1.4.1.2272.1.69.19.1.6 | ColumnrcCfmPbtTrunkStatsSA | read-only | current | Trunk Source Mac (local switch PBT mac) |
| 1.3.6.1.4.1.2272.1.69.19.1.7 | ColumnrcCfmPbtTrunkStatsRxOctets | read-only | current | Number of Octets received by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.8 | ColumnrcCfmPbtTrunkStatsRxFrames | read-only | current | Number of Packets received by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.9 | ColumnrcCfmPbtTrunkStatsTxOctets | read-only | current | Number of Octets transmitted by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.10 | ColumnrcCfmPbtTrunkStatsTxFrames | read-only | current | Number of Packets transmitted by the trunk.This does not include trunk CCM messag (control) packets. |
| 1.3.6.1.4.1.2272.1.69.19.1.11 | ColumnrcCfmPbtTrunkStatsRxPbit0Octets | read-only | current | Number of Pbit 0 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.12 | ColumnrcCfmPbtTrunkStatsRxPbit0Frames | read-only | current | Number of P-Bit 0 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.13 | ColumnrcCfmPbtTrunkStatsRxPbit1Octets | read-only | current | Number of Pbit 1 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.14 | ColumnrcCfmPbtTrunkStatsRxPbit1Frames | read-only | current | Number of P-Bit 1 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.15 | ColumnrcCfmPbtTrunkStatsRxPbit2Octets | read-only | current | Number of Pbit 2 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.16 | ColumnrcCfmPbtTrunkStatsRxPbit2Frames | read-only | current | Number of P-Bit 2 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.17 | ColumnrcCfmPbtTrunkStatsRxPbit3Octets | read-only | current | Number of Pbit 3 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.18 | ColumnrcCfmPbtTrunkStatsRxPbit3Frames | read-only | current | Number of P-Bit 3 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.19 | ColumnrcCfmPbtTrunkStatsRxPbit4Octets | read-only | current | Number of Pbit 4 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.20 | ColumnrcCfmPbtTrunkStatsRxPbit4Frames | read-only | current | Number of P-Bit 4 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.21 | ColumnrcCfmPbtTrunkStatsRxPbit5Octets | read-only | current | Number of Pbit 5 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.22 | ColumnrcCfmPbtTrunkStatsRxPbit5Frames | read-only | current | Number of P-Bit 5 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.23 | ColumnrcCfmPbtTrunkStatsRxPbit6Octets | read-only | current | Number of Pbit64 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.24 | ColumnrcCfmPbtTrunkStatsRxPbit6Frames | read-only | current | Number of P-Bit 6 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.25 | ColumnrcCfmPbtTrunkStatsRxPbit7Octets | read-only | current | Number of Pbit64 Octets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.26 | ColumnrcCfmPbtTrunkStatsRxPbit7Frames | read-only | current | Number of P-Bit 6 Packets received by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.27 | ColumnrcCfmPbtTrunkStatsTxPbit0Octets | read-only | current | Number of Pbit 0 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.28 | ColumnrcCfmPbtTrunkStatsTxPbit0Frames | read-only | current | Number of P-Bit 0 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.29 | ColumnrcCfmPbtTrunkStatsTxPbit1Octets | read-only | current | Number of Pbit 1 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.30 | ColumnrcCfmPbtTrunkStatsTxPbit1Frames | read-only | current | Number of P-Bit 1 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.31 | ColumnrcCfmPbtTrunkStatsTxPbit2Octets | read-only | current | Number of Pbit 2 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.32 | ColumnrcCfmPbtTrunkStatsTxPbit2Frames | read-only | current | Number of P-Bit 2 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.33 | ColumnrcCfmPbtTrunkStatsTxPbit3Octets | read-only | current | Number of Pbit 3 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.34 | ColumnrcCfmPbtTrunkStatsTxPbit3Frames | read-only | current | Number of P-Bit 3 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.35 | ColumnrcCfmPbtTrunkStatsTxPbit4Octets | read-only | current | Number of Pbit 4 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.36 | ColumnrcCfmPbtTrunkStatsTxPbit4Frames | read-only | current | Number of P-Bit 4 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.37 | ColumnrcCfmPbtTrunkStatsTxPbit5Octets | read-only | current | Number of Pbit 5 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.38 | ColumnrcCfmPbtTrunkStatsTxPbit5Frames | read-only | current | Number of P-Bit 5 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.39 | ColumnrcCfmPbtTrunkStatsTxPbit6Octets | read-only | current | Number of Pbit64 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.40 | ColumnrcCfmPbtTrunkStatsTxPbit6Frames | read-only | current | Number of P-Bit 6 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.41 | ColumnrcCfmPbtTrunkStatsTxPbit7Octets | read-only | current | Number of Pbit64 Octets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.19.1.42 | ColumnrcCfmPbtTrunkStatsTxPbit7Frames | read-only | current | Number of P-Bit 6 Packets transmitted by the trunk. |
| 1.3.6.1.4.1.2272.1.69.20 | TablercCfmPortStatsTable | not-accessible | current | CFM Port stats table contains the port Tx and Rx CFM statistics |
| 1.3.6.1.4.1.2272.1.69.20.1 | RowrcCfmPortStatsEntry | not-accessible | current | CFM Port Stats table entry. Contain port's CFM Message sending/receiving counter. |
| 1.3.6.1.4.1.2272.1.69.20.1.1 | ColumnrcCfmPortStatsIndex | not-accessible | current | Slot/Port index |
| 1.3.6.1.4.1.2272.1.69.20.1.2 | ColumnrcCfmPortStatsTxCnt | read-only | current | The total Number of CFM messages that are sent by port |
| 1.3.6.1.4.1.2272.1.69.20.1.3 | ColumnrcCfmPortStatsRxCnt | read-only | current | The total Number of CFM messages are received by port |
| 1.3.6.1.4.1.2272.1.69.21 | TablercCfmFlrTable | not-accessible | current | Frame Loss Ratio Profile table |
| 1.3.6.1.4.1.2272.1.69.21.1 | RowrcCfmFlrEntry | not-accessible | current | Frame Loss Ratio entry. |
| 1.3.6.1.4.1.2272.1.69.21.1.1 | ColumnrcCfmFlrIndex | not-accessible | current | Frame-Loss-Ratio profile index |
| 1.3.6.1.4.1.2272.1.69.21.1.2 | ColumnrcCfmFlrProfileName | read-create | current | Frame-Loss-Ratio Profile Name |
| 1.3.6.1.4.1.2272.1.69.21.1.3 | ColumnrcCfmFlrRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.21.1.4 | ColumnrcCfmFlrPriority | read-create | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.21.1.5 | ColumnrcCfmFlrAlarmThresholdPercent | read-create | current | FLR set alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.21.1.6 | ColumnrcCfmFlrAlarmThresholdSubPercent | read-create | current | FLR set alarm threshold percentage in 1/100 percent increments |
| 1.3.6.1.4.1.2272.1.69.21.1.7 | ColumnrcCfmFlrClearThresholdPercent | read-create | current | FLR clear alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.21.1.8 | ColumnrcCfmFlrClearThresholdSubPercent | read-create | current | FLR clear alarm threshold percentage in 1/100 percent increments |
| 1.3.6.1.4.1.2272.1.69.21.1.9 | ColumnrcCfmFlrThresholdState | read-create | current | FLR threshold State |
| 1.3.6.1.4.1.2272.1.69.21.1.10 | ColumnrcCfmFlrNumberOfRefs | read-only | current | Number of PMs that reference this flr-profile |
| 1.3.6.1.4.1.2272.1.69.22 | TablercCfmFdTable | not-accessible | current | CFM Frame Delay and Frame Delay Variation Profile table |
| 1.3.6.1.4.1.2272.1.69.22.1 | RowrcCfmFdEntry | not-accessible | current | Frame Delay and Frame Delay Variation entry. |
| 1.3.6.1.4.1.2272.1.69.22.1.1 | ColumnrcCfmFdIndex | not-accessible | current | Frame-Delay profile index |
| 1.3.6.1.4.1.2272.1.69.22.1.2 | ColumnrcCfmFdProfileName | read-create | current | Frame-Delay Profile Name |
| 1.3.6.1.4.1.2272.1.69.22.1.3 | ColumnrcCfmFdRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.22.1.4 | ColumnrcCfmFdPriority | read-create | current | Frame Delay messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.22.1.5 | ColumnrcCfmFdPerformanceTarget | read-create | current | Frame delay performance objective in microseconds |
| 1.3.6.1.4.1.2272.1.69.22.1.6 | ColumnrcCfmFdAlarmThresholdPercent | read-create | current | FD set alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.7 | ColumnrcCfmFdAlarmThresholdSubPercent | read-create | current | FD set alarm threshold percentage in 1/100 percent incr ements |
| 1.3.6.1.4.1.2272.1.69.22.1.8 | ColumnrcCfmFdClearThresholdPercent | read-create | current | FD clear alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.9 | ColumnrcCfmFdClearThresholdSubPercent | read-create | current | FD clear alarm threshold percentage in 1/100 percent in crements |
| 1.3.6.1.4.1.2272.1.69.22.1.10 | ColumnrcCfmFdFdvPerformanceTarget | read-create | current | Frame delay variation performance objective in microseconds |
| 1.3.6.1.4.1.2272.1.69.22.1.11 | ColumnrcCfmFdFdvAlarmThresholdPercent | read-create | current | FDV set alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.12 | ColumnrcCfmFdFdvAlarmThresholdSubPercent | read-create | current | FDV set alarm threshold percentage in 1/100 percent inc rements |
| 1.3.6.1.4.1.2272.1.69.22.1.13 | ColumnrcCfmFdFdvClearThresholdPercent | read-create | current | FDV clear alarm threshold percentage |
| 1.3.6.1.4.1.2272.1.69.22.1.14 | ColumnrcCfmFdFdvClearThresholdSubPercent | read-create | current | FDV clear alarm threshold percentage in 1/100 percent i ncrements |
| 1.3.6.1.4.1.2272.1.69.22.1.15 | ColumnrcCfmFdThresholdState | read-create | current | FD / FDV threshold State |
| 1.3.6.1.4.1.2272.1.69.22.1.16 | ColumnrcCfmFdNumberOfRefs | read-only | current | Number of PM's that referencen this fd-profile |
| 1.3.6.1.4.1.2272.1.69.23 | TablercCfmFlrStatsInfoTable | not-accessible | current | CFM Frame Loss Ratio Stats Info |
| 1.3.6.1.4.1.2272.1.69.23.1 | RowrcCfmFlrStatsInfoEntry | not-accessible | current | Frame Loss Ratio Stats Info entry. |
| 1.3.6.1.4.1.2272.1.69.23.1.1 | ColumnrcCfmFlrStatsInfoMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.23.1.2 | ColumnrcCfmFlrStatsInfoMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.23.1.3 | ColumnrcCfmFlrStatsInfoMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.23.1.4 | ColumnrcCfmFlrStatsInfoRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.23.1.5 | ColumnrcCfmFlrStatsInfoPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.23.1.6 | ColumnrcCfmFlrStatsInfoMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.23.1.7 | ColumnrcCfmFlrStatsInfoMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.23.1.8 | ColumnrcCfmFlrStatsInfoPriority | read-only | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.23.1.9 | ColumnrcCfmFlrStatsInfoNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.10 | ColumnrcCfmFlrStatsInfoNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.11 | ColumnrcCfmFlrStatsInfoFarEndPercent | read-only | current | Measured far-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.12 | ColumnrcCfmFlrStatsInfoFarEndSubPercent | read-only | current | Measured far-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.23.1.13 | ColumnrcCfmFlrStatsInfoPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.24 | TablercCfmFlrStatsCurrTable | not-accessible | current | CFM Frame Loss Ratio Stats Current |
| 1.3.6.1.4.1.2272.1.69.24.1 | RowrcCfmFlrStatsCurrEntry | not-accessible | current | CFM Frame Loss Ratio Stats Current entry. |
| 1.3.6.1.4.1.2272.1.69.24.1.1 | ColumnrcCfmFlrStatsCurrMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.24.1.2 | ColumnrcCfmFlrStatsCurrMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.24.1.3 | ColumnrcCfmFlrStatsCurrMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.24.1.4 | ColumnrcCfmFlrStatsCurrRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.24.1.5 | ColumnrcCfmFlrStatsCurrPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.24.1.6 | ColumnrcCfmFlrStatsCurrMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.24.1.7 | ColumnrcCfmFlrStatsCurrMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.24.1.8 | ColumnrcCfmFlrStatsCurrPriority | read-only | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.24.1.9 | ColumnrcCfmFlrStatsCurrPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.24.1.10 | ColumnrcCfmFlrStatsCurrStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.24.1.11 | ColumnrcCfmFlrStatsCurrEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.24.1.12 | ColumnrcCfmFlrStatsCurrHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.24.1.13 | ColumnrcCfmFlrStatsCurrSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.24.1.14 | ColumnrcCfmFlrStatsCurrNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.15 | ColumnrcCfmFlrStatsCurrNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.16 | ColumnrcCfmFlrStatsCurrFarEndPercent | read-only | current | Measured far-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.17 | ColumnrcCfmFlrStatsCurrFarEndSubPercent | read-only | current | Measured far-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.18 | ColumnrcCfmFlrStatsCurrMinNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.19 | ColumnrcCfmFlrStatsCurrMinNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.20 | ColumnrcCfmFlrStatsCurrMinFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.21 | ColumnrcCfmFlrStatsCurrMinFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.22 | ColumnrcCfmFlrStatsCurrMaxNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.23 | ColumnrcCfmFlrStatsCurrMaxNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.24 | ColumnrcCfmFlrStatsCurrMaxFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.25 | ColumnrcCfmFlrStatsCurrMaxFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.24.1.26 | ColumnrcCfmFlrStatsCurrTxFrames | read-only | current | Tx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.27 | ColumnrcCfmFlrStatsCurrRxFrames | read-only | current | Rx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.28 | ColumnrcCfmFlrStatsCurrFlFrames | read-only | current | Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.29 | ColumnrcCfmFlrStatsCurrTxFarEndFrames | read-only | current | Far-end Tx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.30 | ColumnrcCfmFlrStatsCurrRxFarEndFrames | read-only | current | Far-end Rx frames |
| 1.3.6.1.4.1.2272.1.69.24.1.31 | ColumnrcCfmFlrStatsCurrFlFarEndFrames | read-only | current | Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.32 | ColumnrcCfmFlrStatsCurrSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.24.1.33 | ColumnrcCfmFlrStatsCurrSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.24.1.34 | ColumnrcCfmFlrStatsCurrMinFlFrames | read-only | current | Minimum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.35 | ColumnrcCfmFlrStatsCurrSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.24.1.36 | ColumnrcCfmFlrStatsCurrSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.24.1.37 | ColumnrcCfmFlrStatsCurrMinFlFarEndFrames | read-only | current | Minimum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.38 | ColumnrcCfmFlrStatsCurrMaxFlFrames | read-only | current | Maximum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.24.1.39 | ColumnrcCfmFlrStatsCurrMaxFlFarEndFrames | read-only | current | Maximum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25 | TablercCfmFlrStatsHistTable | not-accessible | current | CFM Frame Loss Ratio Stats History |
| 1.3.6.1.4.1.2272.1.69.25.1 | RowrcCfmFlrStatsHistEntry | not-accessible | current | CFM Frame Loss Ratio Stats History entry. |
| 1.3.6.1.4.1.2272.1.69.25.1.1 | ColumnrcCfmFlrStatsHistMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.25.1.2 | ColumnrcCfmFlrStatsHistMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.25.1.3 | ColumnrcCfmFlrStatsHistMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.25.1.4 | ColumnrcCfmFlrStatsHistRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.25.1.5 | ColumnrcCfmFlrStatsHistPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.25.1.6 | ColumnrcCfmFlrStatsHistIndex | not-accessible | current | History Index |
| 1.3.6.1.4.1.2272.1.69.25.1.7 | ColumnrcCfmFlrStatsHistMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.25.1.8 | ColumnrcCfmFlrStatsHistMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.25.1.9 | ColumnrcCfmFlrStatsHistPriority | read-only | current | Frame Loss Ratio messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.25.1.10 | ColumnrcCfmFlrStatsHistStatus | read-only | current | The status of this history interval. |
| 1.3.6.1.4.1.2272.1.69.25.1.11 | ColumnrcCfmFlrStatsHistStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.25.1.12 | ColumnrcCfmFlrStatsHistEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.25.1.13 | ColumnrcCfmFlrStatsHistHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.25.1.14 | ColumnrcCfmFlrStatsHistSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.25.1.15 | ColumnrcCfmFlrStatsHistNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.16 | ColumnrcCfmFlrStatsHistNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.17 | ColumnrcCfmFlrStatsHistFarEndPercent | read-only | current | Measured far-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.18 | ColumnrcCfmFlrStatsHistFarEndSubPercent | read-only | current | Measured far-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.19 | ColumnrcCfmFlrStatsHistMinNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.20 | ColumnrcCfmFlrStatsHistMinNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.21 | ColumnrcCfmFlrStatsHistMinFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.22 | ColumnrcCfmFlrStatsHistMinFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.23 | ColumnrcCfmFlrStatsHistMaxNearEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.24 | ColumnrcCfmFlrStatsHistMaxNearEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.25 | ColumnrcCfmFlrStatsHistMaxFarEndPercent | read-only | current | Measured near-end FLR percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.26 | ColumnrcCfmFlrStatsHistMaxFarEndSubPercent | read-only | current | Measured near-end FLR sub percentage |
| 1.3.6.1.4.1.2272.1.69.25.1.27 | ColumnrcCfmFlrStatsHistTxFrames | read-only | current | Tx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.28 | ColumnrcCfmFlrStatsHistRxFrames | read-only | current | Rx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.29 | ColumnrcCfmFlrStatsHistFlFrames | read-only | current | Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.30 | ColumnrcCfmFlrStatsHistTxFarEndFrames | read-only | current | Far-end Tx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.31 | ColumnrcCfmFlrStatsHistRxFarEndFrames | read-only | current | Far-end Rx frames |
| 1.3.6.1.4.1.2272.1.69.25.1.32 | ColumnrcCfmFlrStatsHistFlFarEndFrames | read-only | current | Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.33 | ColumnrcCfmFlrStatsHistSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.25.1.34 | ColumnrcCfmFlrStatsHistSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.25.1.35 | ColumnrcCfmFlrStatsHistMinFlFrames | read-only | current | Minimum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.36 | ColumnrcCfmFlrStatsHistSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.25.1.37 | ColumnrcCfmFlrStatsHistSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.25.1.38 | ColumnrcCfmFlrStatsHistMinFlFarEndFrames | read-only | current | Minimum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.39 | ColumnrcCfmFlrStatsHistMaxFlFrames | read-only | current | Maximum sample Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.25.1.40 | ColumnrcCfmFlrStatsHistMaxFlFarEndFrames | read-only | current | Maximum sample Far-end Frame Loss frames |
| 1.3.6.1.4.1.2272.1.69.26 | TablercCfmFdStatsInfoTable | not-accessible | current | CFM Frame Delay Stats Info |
| 1.3.6.1.4.1.2272.1.69.26.1 | RowrcCfmFdStatsInfoEntry | not-accessible | current | Frame Delay Stats Info entry. |
| 1.3.6.1.4.1.2272.1.69.26.1.1 | ColumnrcCfmFdStatsInfoMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.26.1.2 | ColumnrcCfmFdStatsInfoMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.26.1.3 | ColumnrcCfmFdStatsInfoMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.26.1.4 | ColumnrcCfmFdStatsInfoRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.26.1.5 | ColumnrcCfmFdStatsInfoPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.26.1.6 | ColumnrcCfmFdStatsInfoMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.26.1.7 | ColumnrcCfmFdStatsInfoMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.26.1.8 | ColumnrcCfmFdStatsInfoPriority | read-only | current | Frame Delay messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.26.1.9 | ColumnrcCfmFdStatsInfoFdPercent | read-only | current | Measured FD percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.10 | ColumnrcCfmFdStatsInfoFdSubPercent | read-only | current | Measured FD sub percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.11 | ColumnrcCfmFdStatsInfoFdvPercent | read-only | current | Measured FDV percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.12 | ColumnrcCfmFdStatsInfoFdvSubPercent | read-only | current | Measured FDV sub percentage |
| 1.3.6.1.4.1.2272.1.69.26.1.13 | ColumnrcCfmFdStatsInfoPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.27 | TablercCfmFdStatsCurrTable | not-accessible | current | CFM Frame Delay Stats Current |
| 1.3.6.1.4.1.2272.1.69.27.1 | RowrcCfmFdStatsCurrEntry | not-accessible | current | CFM Frame Delay Stats Current entry. |
| 1.3.6.1.4.1.2272.1.69.27.1.1 | ColumnrcCfmFdStatsCurrMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.27.1.2 | ColumnrcCfmFdStatsCurrMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.27.1.3 | ColumnrcCfmFdStatsCurrMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.27.1.4 | ColumnrcCfmFdStatsCurrRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.27.1.5 | ColumnrcCfmFdStatsCurrPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.27.1.6 | ColumnrcCfmFdStatsCurrMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.27.1.7 | ColumnrcCfmFdStatsCurrMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.27.1.8 | ColumnrcCfmFdStatsCurrPriority | read-only | current | Frame Delay messaaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.27.1.9 | ColumnrcCfmFdStatsCurrFdPercent | read-only | current | Measured FD percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.10 | ColumnrcCfmFdStatsCurrFdSubPercent | read-only | current | Measured FD sub percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.11 | ColumnrcCfmFdStatsCurrFdvPercent | read-only | current | Measured FDV percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.12 | ColumnrcCfmFdStatsCurrFdvSubPercent | read-only | current | Measured FDV sub percentage |
| 1.3.6.1.4.1.2272.1.69.27.1.13 | ColumnrcCfmFdStatsCurrPmOperState | read-only | current | The operational state of the PM. |
| 1.3.6.1.4.1.2272.1.69.27.1.14 | ColumnrcCfmFdStatsCurrStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.27.1.15 | ColumnrcCfmFdStatsCurrEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.27.1.16 | ColumnrcCfmFdStatsCurrHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.27.1.17 | ColumnrcCfmFdStatsCurrSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.27.1.18 | ColumnrcCfmFdStatsCurrTarget | read-only | current | FD target in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.19 | ColumnrcCfmFdStatsCurrAverage | read-only | current | FD average in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.20 | ColumnrcCfmFdStatsCurrMinimum | read-only | current | FD minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.21 | ColumnrcCfmFdStatsCurrMaximum | read-only | current | FD maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.22 | ColumnrcCfmFdStatsCurrFdvTarget | read-only | current | FDV target in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.23 | ColumnrcCfmFdStatsCurrFdvAverage | read-only | current | FDV average in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.24 | ColumnrcCfmFdStatsCurrFdvMinimum | read-only | current | FDV minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.25 | ColumnrcCfmFdStatsCurrFdvMaximum | read-only | current | FDV maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.27.1.26 | ColumnrcCfmFdStatsCurrSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.27.1.27 | ColumnrcCfmFdStatsCurrSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.27.1.28 | ColumnrcCfmFdStatsCurrSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.27.1.29 | ColumnrcCfmFdStatsCurrSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.28 | TablercCfmFdStatsHistTable | not-accessible | current | CFM Frame Delay Stats History |
| 1.3.6.1.4.1.2272.1.69.28.1 | RowrcCfmFdStatsHistEntry | not-accessible | current | CFM Frame Delay Stats History entry. |
| 1.3.6.1.4.1.2272.1.69.28.1.1 | ColumnrcCfmFdStatsHistMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.28.1.2 | ColumnrcCfmFdStatsHistMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.28.1.3 | ColumnrcCfmFdStatsHistMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.28.1.4 | ColumnrcCfmFdStatsHistRmepId | not-accessible | current | Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.28.1.5 | ColumnrcCfmFdStatsHistPriorityIndex | not-accessible | current | priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0 |
| 1.3.6.1.4.1.2272.1.69.28.1.6 | ColumnrcCfmFdStatsHistIndex | not-accessible | current | History Index |
| 1.3.6.1.4.1.2272.1.69.28.1.7 | ColumnrcCfmFdStatsHistMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.28.1.8 | ColumnrcCfmFdStatsHistMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.28.1.9 | ColumnrcCfmFdStatsHistPriority | read-only | current | Frame Delay messaging runs on COS priority |
| 1.3.6.1.4.1.2272.1.69.28.1.10 | ColumnrcCfmFdStatsHistFdPercent | read-only | current | Measured FD percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.11 | ColumnrcCfmFdStatsHistFdSubPercent | read-only | current | Measured FD sub percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.12 | ColumnrcCfmFdStatsHistFdvPercent | read-only | current | Measured FDV percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.13 | ColumnrcCfmFdStatsHistFdvSubPercent | read-only | current | Measured FDV sub percentage |
| 1.3.6.1.4.1.2272.1.69.28.1.14 | ColumnrcCfmFdStatsHistStatus | read-only | current | The status of this history interval. |
| 1.3.6.1.4.1.2272.1.69.28.1.15 | ColumnrcCfmFdStatsHistStartTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.28.1.16 | ColumnrcCfmFdStatsHistEndTime | read-only | current | The date and time stamp. |
| 1.3.6.1.4.1.2272.1.69.28.1.17 | ColumnrcCfmFdStatsHistHistInterval | read-only | current | History Interval |
| 1.3.6.1.4.1.2272.1.69.28.1.18 | ColumnrcCfmFdStatsHistSampleRate | read-only | current | Sample rate in seconds |
| 1.3.6.1.4.1.2272.1.69.28.1.19 | ColumnrcCfmFdStatsHistTarget | read-only | current | FD target in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.20 | ColumnrcCfmFdStatsHistAverage | read-only | current | FD average in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.21 | ColumnrcCfmFdStatsHistMinimum | read-only | current | FD minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.22 | ColumnrcCfmFdStatsHistMaximum | read-only | current | FD maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.23 | ColumnrcCfmFdStatsHistFdvTarget | read-only | current | FDV target in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.24 | ColumnrcCfmFdStatsHistFdvAverage | read-only | current | FDV average in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.25 | ColumnrcCfmFdStatsHistFdvMinimum | read-only | current | FDV minimum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.26 | ColumnrcCfmFdStatsHistFdvMaximum | read-only | current | FDV maximum in microseconds |
| 1.3.6.1.4.1.2272.1.69.28.1.27 | ColumnrcCfmFdStatsHistSamplesPerInterval | read-only | current | Samples per interval |
| 1.3.6.1.4.1.2272.1.69.28.1.28 | ColumnrcCfmFdStatsHistSamplesTransmitted | read-only | current | Samples transmitted |
| 1.3.6.1.4.1.2272.1.69.28.1.29 | ColumnrcCfmFdStatsHistSamplesNotSent | read-only | current | Samples not sent |
| 1.3.6.1.4.1.2272.1.69.28.1.30 | ColumnrcCfmFdStatsHistSamplesReceived | read-only | current | Samples received |
| 1.3.6.1.4.1.2272.1.69.29 | TablercCfmPmTable | not-accessible | current | CFM Performance Monitoring Configuration |
| 1.3.6.1.4.1.2272.1.69.29.1 | RowrcCfmPmEntry | not-accessible | current | Connectivity Fault Management Performance Monitoring entry. |
| 1.3.6.1.4.1.2272.1.69.29.1.1 | ColumnrcCfmPmMdIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.29.1.2 | ColumnrcCfmPmMaIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.29.1.3 | ColumnrcCfmPmMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.29.1.4 | ColumnrcCfmPmRmepId | not-accessible | current | Remote Maintenance Endpoint ID. The performance monitoring pair is MepId-RmepId |
| 1.3.6.1.4.1.2272.1.69.29.1.5 | ColumnrcCfmPmMdName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.29.1.6 | ColumnrcCfmPmMaName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.29.1.7 | ColumnrcCfmPmRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.29.1.8 | ColumnrcCfmPmState | read-create | current | Performance Monitoring State |
| 1.3.6.1.4.1.2272.1.69.29.1.9 | ColumnrcCfmPmFdList | read-create | current | Comma separated list of Frame-Delay profile names. Valid profile names must first be created using rcCfmFdProfileName. Number of entries in the list is indicat… |
| 1.3.6.1.4.1.2272.1.69.29.1.10 | ColumnrcCfmPmFdSize | read-only | current | Number of Frame-Delay profiles names |
| 1.3.6.1.4.1.2272.1.69.29.1.11 | ColumnrcCfmPmFlrList | read-create | current | Comma separated list of Frame-Loss-Ratio profile names. Valid profile names must first be created using rcCfmFlrProfileName. Number of entries in the list is i… |
| 1.3.6.1.4.1.2272.1.69.29.1.12 | ColumnrcCfmPmFlrSize | read-only | current | Number of FLR profile names in FLR list |
| 1.3.6.1.4.1.2272.1.69.29.1.13 | ColumnrcCfmPmHistoryInterval | read-create | current | History summary interval in minutes |
| 1.3.6.1.4.1.2272.1.69.29.1.14 | ColumnrcCfmPmSampleRate | read-create | current | Sample rate once per sample interval specified in seconds |
| 1.3.6.1.4.1.2272.1.69.32 | TablercCfmLtrTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.32.1 | RowrcCfmLtrEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.32.1.1 | ColumnrcCfmLtrDomainIndex | not-accessible | current | Maintenance Domain Index |
| 1.3.6.1.4.1.2272.1.69.32.1.2 | ColumnrcCfmLtrAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.32.1.3 | ColumnrcCfmLtrMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.32.1.4 | ColumnrcCfmLtrSeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linkrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.2272.1.69.32.1.5 | ColumnrcCfmLtrTtl | not-accessible | current | Ttl field value for a returned LTR. |
| 1.3.6.1.4.1.2272.1.69.32.1.6 | ColumnrcCfmLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that… |
| 1.3.6.1.4.1.2272.1.69.32.1.7 | ColumnrcCfmLtrDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.32.1.8 | ColumnrcCfmLtrAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.32.1.9 | ColumnrcCfmLtrForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.2272.1.69.32.1.10 | ColumnrcCfmLtrTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.2272.1.69.32.1.11 | ColumnrcCfmLtrLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.2272.1.69.32.1.12 | ColumnrcCfmLtrNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.2272.1.69.32.1.13 | ColumnrcCfmLtrRelayAction | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.2272.1.69.32.1.14 | ColumnrcCfmLtrSrcMac | read-only | current | Mac address of the MP that respond to the LTM request for this LTR |
| 1.3.6.1.4.1.2272.1.69.32.1.15 | ColumnrcCfmLtrIngressAction | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.32.1.16 | ColumnrcCfmLtrIngressMac | read-only | current | Mac address returned in the ingress MAC address field. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meani… |
| 1.3.6.1.4.1.2272.1.69.32.1.17 | ColumnrcCfmLtrIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.32.1.18 | ColumnrcCfmLtrIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrIngressPortIdSubtype object. If the rcCfmLtrIngress object contains the va… |
| 1.3.6.1.4.1.2272.1.69.32.1.19 | ColumnrcCfmLtrEgressAction | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.32.1.20 | ColumnrcCfmLtrEgressMac | read-only | current | Mac address returned in the egress MAC address field. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaning… |
| 1.3.6.1.4.1.2272.1.69.32.1.21 | ColumnrcCfmLtrEgressPortIdSubtype | read-only | current | Format of the Egress Port ID. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.32.1.22 | ColumnrcCfmLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrEgressPortIdSubtype object. If the rcCfmLtrEgress object contains the value… |
| 1.3.6.1.4.1.2272.1.69.33 | TablercCfmLtrReplyTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.33.1 | RowrcCfmLtrReplyEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.33.1.1 | ColumnrcCfmLtrReplyDomainIndex | not-accessible | current | Maintenance Domain Index |
| 1.3.6.1.4.1.2272.1.69.33.1.2 | ColumnrcCfmLtrReplyAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.33.1.3 | ColumnrcCfmLtrReplyMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.33.1.4 | ColumnrcCfmLtrReplySeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.2272.1.69.33.1.5 | ColumnrcCfmLtrReplyHop | not-accessible | current | The number of hops away from LTM initiator |
| 1.3.6.1.4.1.2272.1.69.33.1.6 | ColumnrcCfmLtrReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that… |
| 1.3.6.1.4.1.2272.1.69.33.1.7 | ColumnrcCfmLtrReplyTtl | read-only | current | Ttl field value for a returned LTR. |
| 1.3.6.1.4.1.2272.1.69.33.1.8 | ColumnrcCfmLtrReplyDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.33.1.9 | ColumnrcCfmLtrReplyAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.33.1.10 | ColumnrcCfmLtrReplyForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.2272.1.69.33.1.11 | ColumnrcCfmLtrReplyTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.2272.1.69.33.1.12 | ColumnrcCfmLtrReplyLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.2272.1.69.33.1.13 | ColumnrcCfmLtrReplyNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.2272.1.69.33.1.14 | ColumnrcCfmLtrReplyRelayAction | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.2272.1.69.33.1.15 | ColumnrcCfmLtrReplySrcMac | read-only | current | Mac address of the MP that respond to the LTM request for this LTR |
| 1.3.6.1.4.1.2272.1.69.33.1.16 | ColumnrcCfmLtrReplyIngressAction | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.33.1.17 | ColumnrcCfmLtrReplyIngressMac | read-only | current | Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are … |
| 1.3.6.1.4.1.2272.1.69.33.1.18 | ColumnrcCfmLtrReplyIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.33.1.19 | ColumnrcCfmLtrReplyIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object conta… |
| 1.3.6.1.4.1.2272.1.69.33.1.20 | ColumnrcCfmLtrReplyEgressAction | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.33.1.21 | ColumnrcCfmLtrReplyEgressMac | read-only | current | Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are me… |
| 1.3.6.1.4.1.2272.1.69.33.1.22 | ColumnrcCfmLtrReplyEgressPortIdSubtype | read-only | current | Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.33.1.23 | ColumnrcCfmLtrReplyEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains… |
| 1.3.6.1.4.1.2272.1.69.34 | TablercCfmTransmitL2PingTable | not-accessible | current | Connectivity Fault Management transmit L2Ping table |
| 1.3.6.1.4.1.2272.1.69.34.1 | RowrcCfmTransmitL2PingEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint L2Ping entry. |
| 1.3.6.1.4.1.2272.1.69.34.1.1 | ColumnrcCfmTransmitL2PingVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.34.1.2 | ColumnrcCfmTransmitL2PingDestMacAddress | read-write | current | An indication of the target MAC Address field to be transmitted |
| 1.3.6.1.4.1.2272.1.69.34.1.3 | ColumnrcCfmTransmitL2PingHostName | read-write | current | The target host name |
| 1.3.6.1.4.1.2272.1.69.34.1.4 | ColumnrcCfmTransmitL2PingDestIsHostName | read-write | current | True indicates that the host name is used for L2Ping transmission |
| 1.3.6.1.4.1.2272.1.69.34.1.5 | ColumnrcCfmTransmitL2PingMessages | read-write | current | The number of L2Ping messages to be transmitted. |
| 1.3.6.1.4.1.2272.1.69.34.1.6 | ColumnrcCfmTransmitL2PingPriority | read-write | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.34.1.7 | ColumnrcCfmTransmitL2PingTimeoutInt | read-write | current | The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.34.1.8 | ColumnrcCfmTransmitL2PingTestPattern | read-write | current | The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a de… |
| 1.3.6.1.4.1.2272.1.69.34.1.9 | ColumnrcCfmTransmitL2PingDataSize | read-write | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.10 | ColumnrcCfmTransmitL2PingFrameSize | read-write | current | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| 1.3.6.1.4.1.2272.1.69.34.1.11 | ColumnrcCfmTransmitL2PingSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.34.1.12 | ColumnrcCfmTransmitL2PingSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.13 | ColumnrcCfmTransmitL2PingResultOk | read-only | current | Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.14 | ColumnrcCfmTransmitL2PingStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -… |
| 1.3.6.1.4.1.2272.1.69.34.1.15 | ColumnrcCfmTransmitL2PingResult | read-only | current | Display the L2Ping result. |
| 1.3.6.1.4.1.2272.1.69.35 | TablercCfmTransmitL2TraceTable | not-accessible | current | Connectivity Fault Management transmit L2Trace table |
| 1.3.6.1.4.1.2272.1.69.35.1 | RowrcCfmTransmitL2TraceEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint L2Trace entry. |
| 1.3.6.1.4.1.2272.1.69.35.1.1 | ColumnrcCfmTransmitL2TraceVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.35.1.2 | ColumnrcCfmTransmitL2TracePriority | read-write | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.35.1.3 | ColumnrcCfmTransmitL2TraceDestMacAddress | read-write | current | An indication of the target MAC Address field to be transmitted |
| 1.3.6.1.4.1.2272.1.69.35.1.4 | ColumnrcCfmTransmitL2TraceHostName | read-write | current | The target host name |
| 1.3.6.1.4.1.2272.1.69.35.1.5 | ColumnrcCfmTransmitL2TraceIsid | read-write | current | Isid Id |
| 1.3.6.1.4.1.2272.1.69.35.1.6 | ColumnrcCfmTransmitL2TraceNickName | read-only | current | Local Node nick name |
| 1.3.6.1.4.1.2272.1.69.35.1.7 | ColumnrcCfmTransmitL2TraceDestIsHostName | read-write | current | True indicates that the host name is used for L2Trace transmission |
| 1.3.6.1.4.1.2272.1.69.35.1.8 | ColumnrcCfmTransmitL2TraceIsidTree | read-write | current | True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced |
| 1.3.6.1.4.1.2272.1.69.35.1.9 | ColumnrcCfmTransmitL2TraceTtl | read-write | current | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 … |
| 1.3.6.1.4.1.2272.1.69.35.1.10 | ColumnrcCfmTransmitL2TraceSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.35.1.11 | ColumnrcCfmTransmitL2TraceSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.35.1.12 | ColumnrcCfmTransmitL2TraceResultOk | read-only | current | Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.35.1.13 | ColumnrcCfmTransmitL2TraceStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. … |
| 1.3.6.1.4.1.2272.1.69.35.1.14 | ColumnrcCfmTransmitL2TraceFlag | read-only | current | L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Inv… |
| 1.3.6.1.4.1.2272.1.69.36 | TablercCfmL2TraceReplyTable | not-accessible | current | This table contains a list of l2trace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.36.1 | RowrcCfmL2TraceReplyEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.36.1.1 | ColumnrcCfmL2TraceReplyVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.36.1.2 | ColumnrcCfmL2TraceReplySeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be return… |
| 1.3.6.1.4.1.2272.1.69.36.1.3 | ColumnrcCfmL2TraceReplyHop | not-accessible | current | The number of hops away from L2Trace initiator. |
| 1.3.6.1.4.1.2272.1.69.36.1.4 | ColumnrcCfmL2TraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the o… |
| 1.3.6.1.4.1.2272.1.69.36.1.5 | ColumnrcCfmL2TraceReplyTtl | read-only | current | Ttl field value for a returned L2Trace response. |
| 1.3.6.1.4.1.2272.1.69.36.1.6 | ColumnrcCfmL2TraceReplySrcMac | read-only | current | Mac address of the MP that respond to the L2Trace request for this L2traceReply |
| 1.3.6.1.4.1.2272.1.69.36.1.7 | ColumnrcCfmL2TraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.36.1.8 | ColumnrcCfmL2TraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.36.1.9 | ColumnrcCfmL2TraceReplyLastHostName | read-only | current | The host name of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.37 | TablercCfmTransmitL2IpPingTable | not-accessible | current | Connectivity Fault Management transmit L2IpPing table |
| 1.3.6.1.4.1.2272.1.69.37.1 | RowrcCfmTransmitL2IpPingEntry | not-accessible | current | L2IpPing entry. |
| 1.3.6.1.4.1.2272.1.69.37.1.1 | ColumnrcCfmTransmitL2IpPingIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.37.1.2 | ColumnrcCfmTransmitL2IpPingIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.37.1.3 | ColumnrcCfmTransmitL2IpPingVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.37.1.4 | ColumnrcCfmTransmitL2IpPingVrfName | read-only | current | The Name of the Virtual Router |
| 1.3.6.1.4.1.2272.1.69.37.1.5 | ColumnrcCfmTransmitL2IpPingMessages | read-create | current | The number of L2IpPing messages to be transmitted per mac/vlan pair. |
| 1.3.6.1.4.1.2272.1.69.37.1.6 | ColumnrcCfmTransmitL2IpPingTimeoutInt | read-create | current | The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.37.1.7 | ColumnrcCfmTransmitL2IpPingTestPattern | read-create | current | The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a… |
| 1.3.6.1.4.1.2272.1.69.37.1.8 | ColumnrcCfmTransmitL2IpPingDataSize | read-create | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.37.1.9 | ColumnrcCfmTransmitL2IpPingStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages.… |
| 1.3.6.1.4.1.2272.1.69.37.1.10 | ColumnrcCfmTransmitL2IpPingResultOk | read-only | current | Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.37.1.11 | ColumnrcCfmTransmitL2IpPingPathsFound | read-only | current | The number of paths found to execute l2ping command |
| 1.3.6.1.4.1.2272.1.69.37.1.12 | ColumnrcCfmTransmitL2IpPingRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries be… |
| 1.3.6.1.4.1.2272.1.69.38 | TablercCfmL2IpPingReplyTable | not-accessible | current | This table contains a list of l2 ip ping replies received |
| 1.3.6.1.4.1.2272.1.69.38.1 | RowrcCfmL2IpPingReplyEntry | not-accessible | current | The L2 Ip Ping Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.38.1.1 | ColumnrcCfmL2IpPingReplyIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.38.1.2 | ColumnrcCfmL2IpPingReplyIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.38.1.3 | ColumnrcCfmL2IpPingReplySendOrder | not-accessible | current | An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to t… |
| 1.3.6.1.4.1.2272.1.69.38.1.4 | ColumnrcCfmL2IpPingReplyVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.38.1.5 | ColumnrcCfmL2IpPingReplyVlanId | read-only | current | Vlan found from L3 lookup and used for transmission |
| 1.3.6.1.4.1.2272.1.69.38.1.6 | ColumnrcCfmL2IpPingReplyDestMacAddress | read-only | current | An indication of the target MAC Address transmitted |
| 1.3.6.1.4.1.2272.1.69.38.1.7 | ColumnrcCfmL2IpPingReplyPortNum | read-only | current | Either the value '0', or the port number of the port used for the l2ping. |
| 1.3.6.1.4.1.2272.1.69.38.1.8 | ColumnrcCfmL2IpPingReplyDestHostName | read-only | current | The host name of the responding node |
| 1.3.6.1.4.1.2272.1.69.38.1.9 | ColumnrcCfmL2IpPingReplySize | read-only | current | The number of bytes of data sent |
| 1.3.6.1.4.1.2272.1.69.38.1.10 | ColumnrcCfmL2IpPingReplyPktsTx | read-only | current | Number of Packets transmitted for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.11 | ColumnrcCfmL2IpPingReplyPktsRx | read-only | current | Number of Packets received for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.12 | ColumnrcCfmL2IpPingReplyPercentLossWhole | read-only | current | Percentage of packet loss for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.13 | ColumnrcCfmL2IpPingReplyPercentLossFract | read-only | current | Percentage of packet loss for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.14 | ColumnrcCfmL2IpPingReplyMinRoundTrip | read-only | current | Min time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.15 | ColumnrcCfmL2IpPingReplyMaxRoundTrip | read-only | current | Max time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.16 | ColumnrcCfmL2IpPingReplyRttAvgWhole | read-only | current | Average time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.17 | ColumnrcCfmL2IpPingReplyRttAvgFract | read-only | current | Fractional portion of Average time for round-trip |
| 1.3.6.1.4.1.2272.1.69.38.1.18 | ColumnrcCfmL2IpPingReplyFlag | read-only | current | Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace comp… |
| 1.3.6.1.4.1.2272.1.69.39 | TablercCfmTransmitL2IpTraceTable | not-accessible | current | Connectivity Fault Management transmit L2IpTrace table |
| 1.3.6.1.4.1.2272.1.69.39.1 | RowrcCfmTransmitL2IpTraceEntry | not-accessible | current | L2IpTrace entry. |
| 1.3.6.1.4.1.2272.1.69.39.1.1 | ColumnrcCfmTransmitL2IpTraceIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.39.1.2 | ColumnrcCfmTransmitL2IpTraceIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.39.1.3 | ColumnrcCfmTransmitL2IpTraceVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.39.1.4 | ColumnrcCfmTransmitL2IpTraceVrfName | read-only | current | The Name of the Virtual Router |
| 1.3.6.1.4.1.2272.1.69.39.1.5 | ColumnrcCfmTransmitL2IpTraceTtl | read-create | current | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 … |
| 1.3.6.1.4.1.2272.1.69.39.1.6 | ColumnrcCfmTransmitL2IpTraceStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. … |
| 1.3.6.1.4.1.2272.1.69.39.1.7 | ColumnrcCfmTransmitL2IpTraceResultOk | read-only | current | Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.39.1.8 | ColumnrcCfmTransmitL2IpTracePathsFound | read-only | current | The number of paths found to execute l2trace command |
| 1.3.6.1.4.1.2272.1.69.39.1.9 | ColumnrcCfmTransmitL2IpTraceRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries … |
| 1.3.6.1.4.1.2272.1.69.40 | TablercCfmL2IpTraceReplyTable | not-accessible | current | This table contains a list of l2 ip trace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.40.1 | RowrcCfmL2IpTraceReplyEntry | not-accessible | current | The L2 Ip Trace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.40.1.1 | ColumnrcCfmL2IpTraceReplyIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.40.1.2 | ColumnrcCfmL2IpTraceReplyIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.40.1.3 | ColumnrcCfmL2IpTraceReplySendOrder | not-accessible | current | An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to … |
| 1.3.6.1.4.1.2272.1.69.40.1.4 | ColumnrcCfmL2IpTraceReplyHop | not-accessible | current | The number of L2 hops away from L2Trace initiator. |
| 1.3.6.1.4.1.2272.1.69.40.1.5 | ColumnrcCfmL2IpTraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in … |
| 1.3.6.1.4.1.2272.1.69.40.1.6 | ColumnrcCfmL2IpTraceReplyTtl | read-only | current | Ttl field value for a returned L2Trace response. |
| 1.3.6.1.4.1.2272.1.69.40.1.7 | ColumnrcCfmL2IpTraceReplyVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.40.1.8 | ColumnrcCfmL2IpTraceReplyVlanId | read-only | current | Vlan found from L3 lookup and used for transmission |
| 1.3.6.1.4.1.2272.1.69.40.1.9 | ColumnrcCfmL2IpTraceReplyDestMacAddress | read-only | current | An indication of the target MAC Address transmitted |
| 1.3.6.1.4.1.2272.1.69.40.1.10 | ColumnrcCfmL2IpTraceReplySeqNumber | read-only | current | The transaction identifier/sequence number used in linktrace message packet |
| 1.3.6.1.4.1.2272.1.69.40.1.11 | ColumnrcCfmL2IpTraceReplyPortNum | read-only | current | Either the value '0', or the port number of the port used for the l2trace. |
| 1.3.6.1.4.1.2272.1.69.40.1.12 | ColumnrcCfmL2IpTraceReplySrcMac | read-only | current | Mac address of the MP that responded to L2Trace request for this L2traceReply |
| 1.3.6.1.4.1.2272.1.69.40.1.13 | ColumnrcCfmL2IpTraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.40.1.14 | ColumnrcCfmL2IpTraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.40.1.15 | ColumnrcCfmL2IpTraceReplyLastHostName | read-only | current | The host name of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.40.1.16 | ColumnrcCfmL2IpTraceReplyFlag | read-only | current | L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac… |
| 1.3.6.1.4.1.2272.1.69.41 | TablercCfmTransmitL2McastTraceTable | not-accessible | current | This table contains a list of l2 multicast route trace requests. |
| 1.3.6.1.4.1.2272.1.69.41.1 | RowrcCfmTransmitL2McastTraceEntry | not-accessible | current | CFM Transmit L2 Multicast Trace Entry. |
| 1.3.6.1.4.1.2272.1.69.41.1.1 | ColumnrcCfmTransmitL2McastTraceSrcIpAddrType | not-accessible | current | The address type of Source IP Address |
| 1.3.6.1.4.1.2272.1.69.41.1.2 | ColumnrcCfmTransmitL2McastTraceSrcIpAddr | not-accessible | current | Source IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.41.1.3 | ColumnrcCfmTransmitL2McastTraceGroupIpAddrType | not-accessible | current | The address type of Multicast Group IP Address |
| 1.3.6.1.4.1.2272.1.69.41.1.4 | ColumnrcCfmTransmitL2McastTraceGroupIpAddr | not-accessible | current | Multicast Group IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.41.1.5 | ColumnrcCfmTransmitL2McastTraceServiceType | not-accessible | current | Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id |
| 1.3.6.1.4.1.2272.1.69.41.1.6 | ColumnrcCfmTransmitL2McastTraceServiceId | not-accessible | current | Value of VLAN or VRF-Id. Meaning controlled by rcCfmTransmitL2McastTraceServiceType. Value must be valid for type (e.g. VLAN range 1..4094) |
| 1.3.6.1.4.1.2272.1.69.41.1.7 | ColumnrcCfmTransmitL2McastTraceVrfName | read-only | current | The name of the Virtual Router of the originator |
| 1.3.6.1.4.1.2272.1.69.41.1.8 | ColumnrcCfmTransmitL2McastTraceRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2McastTraceTable. Deletion of an entry in this table results in a corresponding rcCfmL2McastTraceReplyTable … |
| 1.3.6.1.4.1.2272.1.69.41.1.9 | ColumnrcCfmTransmitL2McastTracePriority | read-create | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.41.1.10 | ColumnrcCfmTransmitL2McastTraceTtl | read-create | current | The number of hops remaining to this trace. Decremented by 1 by each Bridge that handles trace. If 0 on output, the trace is not transmitted to the next hop. T… |
| 1.3.6.1.4.1.2272.1.69.41.1.11 | ColumnrcCfmTransmitL2McastTraceSeqNumber | read-only | current | The transaction identifier/sequence number of the first message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.41.1.12 | ColumnrcCfmTransmitL2McastTraceStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit the trace messages. -ab… |
| 1.3.6.1.4.1.2272.1.69.41.1.13 | ColumnrcCfmTransmitL2McastTraceResultOk | read-only | current | Indicates the result of the operation: -true. The Trace Message(s) will/have been sent. -false. The Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.41.1.14 | ColumnrcCfmTransmitL2McastTraceFlag | read-only | current | Result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Mep must be enabled… |
| 1.3.6.1.4.1.2272.1.69.42 | TablercCfmL2McastTraceReplyTable | not-accessible | current | This table contains a list of multicast route trace replies received by a specific MEP in response to a trace message. |
| 1.3.6.1.4.1.2272.1.69.42.1 | RowrcCfmL2McastTraceReplyEntry | not-accessible | current | The L2 Multicast Trace Reply Table Entry |
| 1.3.6.1.4.1.2272.1.69.42.1.1 | ColumnrcCfmL2McastTraceReplySrcIpAddrType | not-accessible | current | The address type of Source IP Address |
| 1.3.6.1.4.1.2272.1.69.42.1.2 | ColumnrcCfmL2McastTraceReplySrcIpAddr | not-accessible | current | Source IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.42.1.3 | ColumnrcCfmL2McastTraceReplyGroupIpAddrType | not-accessible | current | The address type of Multicast Group IP Address |
| 1.3.6.1.4.1.2272.1.69.42.1.4 | ColumnrcCfmL2McastTraceReplyGroupIpAddr | not-accessible | current | Multicast Group IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.42.1.5 | ColumnrcCfmL2McastTraceReplyServiceType | not-accessible | current | Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id |
| 1.3.6.1.4.1.2272.1.69.42.1.6 | ColumnrcCfmL2McastTraceReplyServiceId | not-accessible | current | Value of VLAN or VRF-Id. Meaning controlled by rcCfmL2McastTraceReplyServiceType. Value must be valid for type (e.g. VLAN range 1..4094) |
| 1.3.6.1.4.1.2272.1.69.42.1.7 | ColumnrcCfmL2McastTraceReplyHop | not-accessible | current | The number of hops away from trace initiator |
| 1.3.6.1.4.1.2272.1.69.42.1.8 | ColumnrcCfmL2McastTraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order tha… |
| 1.3.6.1.4.1.2272.1.69.42.1.9 | ColumnrcCfmL2McastTraceReplyTtl | read-only | current | Ttl field value for a returned trace response. |
| 1.3.6.1.4.1.2272.1.69.42.1.10 | ColumnrcCfmL2McastTraceReplyVrfName | read-only | current | The name of the Virtual Router of the originator |
| 1.3.6.1.4.1.2272.1.69.42.1.11 | ColumnrcCfmL2McastTraceReplySrcMac | read-only | current | Mac address of the MP that respond to the trace request |
| 1.3.6.1.4.1.2272.1.69.42.1.12 | ColumnrcCfmL2McastTraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.42.1.13 | ColumnrcCfmL2McastTraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.42.1.14 | ColumnrcCfmL2McastTraceReplyLastHostName | read-only | current | The host name of the node that forwarded the trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.42.1.15 | ColumnrcCfmL2McastTraceReplySpbmVlanId | read-only | current | The SPBM VLAN id used for the trace |
| 1.3.6.1.4.1.2272.1.69.42.1.16 | ColumnrcCfmL2McastTraceReplyBMac | read-only | current | The multicast MAC address for the group |
| 1.3.6.1.4.1.2272.1.69.42.1.17 | ColumnrcCfmL2McastTraceReplyIsid | read-only | current | Isid id for the group |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CfmEgressActionFieldValue | INTEGER { egrOk (1), egrDown (2), egrBlocked (3), egrVid (4), egrNoTlv (5) } | current | Possible values returned in the egress action field |
| CfmIngressActionFieldValue | INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4), ingNoTlv (5) } | current | Possible values returned in the ingress action field. |
| CfmRelayActionFieldValue | INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3), unknown (4) } | current | Possible values the Relay action field can take. |
| LldpPortId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th… |
| LldpPortIdSubtype | INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } | current | This TC describes the source of a particular type of Port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The … |