RC-DIAG-MIB
179 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| IF-MIB | InterfaceIndex |
| RAPID-CITY | EnableValue PortSet rcDiag rcMirror |
| RC-ISIS-MIB | IsisPlsbNodeNickName |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.5.1 | ScalarrcMirrorSaveConfig | read-write | current | Control whether Mirror configuration information should be saved to NVRAM so mirror settings can be automatically reinstalled after a system reboot. Setting rc… |
| 1.3.6.1.4.1.2272.1.5.2 | NodercMirrorByPort | |||
| 1.3.6.1.4.1.2272.1.5.2.1 | ScalarrcMirrorByPortEnable | read-write | deprecated | Used to indicate whether the mirror by port feature is active. The system can only support mirroring on two ports. When this feature is active, all packets rec… |
| 1.3.6.1.4.1.2272.1.5.2.2 | ScalarrcMirrorByPortMirrorPort | read-write | deprecated | The ifIndex of the port to forward mirrored frames to. |
| 1.3.6.1.4.1.2272.1.5.2.3 | ScalarrcMirrorByPortEnableMirroredPortOne | read-write | deprecated | Used to indicate whether the port specified in rcMirrorByPortMirroredPortOne should be mirrored. |
| 1.3.6.1.4.1.2272.1.5.2.4 | ScalarrcMirrorByPortMirroredPortOne | read-write | deprecated | The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port. |
| 1.3.6.1.4.1.2272.1.5.2.5 | ScalarrcMirrorByPortEnableMirroredPortTwo | read-write | deprecated | Used to indicate whether the port specified in rcMirrorByPortMirroredPortTwo should be mirrored. |
| 1.3.6.1.4.1.2272.1.5.2.6 | ScalarrcMirrorByPortMirroredPortTwo | read-write | deprecated | The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port. |
| 1.3.6.1.4.1.2272.1.23.0 | IdentityrcDiagMib | Enterprise MIB for the Accelar product family. | ||
| 1.3.6.1.4.1.2272.1.23.1 | TablercDiagMirrorByPortTable | not-accessible | current | This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen on a particular port to a diff… |
| 1.3.6.1.4.1.2272.1.23.1.1 | RowrcDiagMirrorByPortEntry | not-accessible | current | Entry containing mirror by port information. |
| 1.3.6.1.4.1.2272.1.23.1.1.1 | ColumnrcDiagMirrorByPortId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.1.1.2 | ColumnrcDiagMirrorByPortMirroredPort | read-write | current | Used to configure the 'mirrored' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.3 | ColumnrcDiagMirrorByPortMirroringPort | read-write | current | Used to configure the 'mirroring' port. The port where packets are copied to. |
| 1.3.6.1.4.1.2272.1.23.1.1.4 | ColumnrcDiagMirrorByPortMode | read-write | current | Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received o… |
| 1.3.6.1.4.1.2272.1.23.1.1.5 | ColumnrcDiagMirrorByPortEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.23.1.1.6 | ColumnrcDiagMirrorByPortRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.23.1.1.7 | ColumnrcDiagMirrorByPortOctapidId | read-only | deprecated | Octapid Id for a port. |
| 1.3.6.1.4.1.2272.1.23.1.1.8 | ColumnrcDiagMirrorByPortPid | read-only | current | Pid for a port. |
| 1.3.6.1.4.1.2272.1.23.1.1.9 | ColumnrcDiagMirrorRemoteMirrorVlanId | read-write | current | vlan-id to which mirrored packets needs to be send for remote mirroring. If set, this vlan id is used in mirror tag of the remote mirrored packet |
| 1.3.6.1.4.1.2272.1.23.1.1.10 | ColumnrcDiagMirrorByPortSpEncap | read-write | current | disable/enable service provide encapsulation. If this attribute is true the mirrored packets contains the service provider encapsulation, OEL2 and Mac-in-Mac e… |
| 1.3.6.1.4.1.2272.1.23.1.1.11 | ColumnrcDiagMirrorByPortGranularity | read-write | current | Used to configure the 'granularity' of the mirror operation physicalPort means all traffic ingressing or egressing out of the mirrored port shall be copied to … |
| 1.3.6.1.4.1.2272.1.23.1.1.12 | ColumnrcDiagMirrorByPortMirroredPortList | read-create | current | Used to configure mirroring port list.Port list where packets are copied from |
| 1.3.6.1.4.1.2272.1.23.1.1.13 | ColumnrcDiagMirrorByPortMirroringPortList | read-create | current | Used to configure mirroring port list.Port list where the packets are copied to |
| 1.3.6.1.4.1.2272.1.23.1.1.14 | ColumnrcDiagMirrorMirroringVlanId | read-create | current | Destination is a VLAN. |
| 1.3.6.1.4.1.2272.1.23.1.1.15 | ColumnrcDiagMirrorMirroringMltId | read-create | current | Destination is a MLT |
| 1.3.6.1.4.1.2272.1.23.1.1.16 | ColumnrcDiagMirrorMirroringMgId | read-only | current | contains information about the MGID allocated. |
| 1.3.6.1.4.1.2272.1.23.1.1.17 | ColumnrcDiagMirrorMirroringIpAddr | read-write | current | Destination IP address. |
| 1.3.6.1.4.1.2272.1.23.1.1.18 | ColumnrcDiagMirrorMirroringIpTtl | read-write | current | Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl. |
| 1.3.6.1.4.1.2272.1.23.1.1.19 | ColumnrcDiagMirrorMirroringIpDscp | read-write | current | Dscp value for mirrored packets when mirror destination is IP. If other than default, the encapsulated packet will have the given Dscp value. |
| 1.3.6.1.4.1.2272.1.23.1.1.20 | ColumnrcDiagMirrorByPortScope | read-create | current | Used to configure the port mirroring scope. Chassis is the default option which allows mirroring among ports from different slots. Slice option requires both m… |
| 1.3.6.1.4.1.2272.1.23.1.1.21 | ColumnrcDiagMirrorMonitoringIsidOffset | read-create | current | Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.1.1.22 | ColumnrcDiagMirrorMonitoringIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.1.1.23 | ColumnrcDiagMirrorMirroringQos | read-create | current | Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID. |
| 1.3.6.1.4.1.2272.1.23.2 | TablercDiagPortConvSteeringTable | not-accessible | current | Diag Port Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.2.1 | RowrcDiagPortConvSteeringEntry | not-accessible | current | Entry containing infomation of Diag Port Conv Steering. |
| 1.3.6.1.4.1.2272.1.23.2.1.1 | ColumnrcDiagPortConvSteeringId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.2.1.2 | ColumnrcDiagPortConvSteeringPortOne | read-write | current | IfIndex for port one |
| 1.3.6.1.4.1.2272.1.23.2.1.3 | ColumnrcDiagPortConvSteeringPortTwo | read-write | current | IfIndex for port two |
| 1.3.6.1.4.1.2272.1.23.2.1.4 | ColumnrcDiagPortConvSteeringMode | read-write | current | Used to specify the traffic flow that should be captured between ports one and two. |
| 1.3.6.1.4.1.2272.1.23.2.1.5 | ColumnrcDiagPortConvSteeringForwardPort | read-write | current | IfIndex of the port where captured traffic should be forwarded to. |
| 1.3.6.1.4.1.2272.1.23.2.1.6 | ColumnrcDiagPortConvSteeringEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.2272.1.23.2.1.7 | ColumnrcDiagPortConvSteeringRowStatus | read-write | current | Used to create/delete entries in the rcDiagMirrorByPortTable. |
| 1.3.6.1.4.1.2272.1.23.3 | TablercDiagMacConvSteeringTable | not-accessible | current | Diag Mac Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.3.1 | RowrcDiagMacConvSteeringEntry | not-accessible | current | Entry containing infomation of Diag Mac Conv Steering. |
| 1.3.6.1.4.1.2272.1.23.3.1.1 | ColumnrcDiagMacConvSteeringId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.3.1.2 | ColumnrcDiagMacConvSteeringSrcMac | read-write | current | Source MAC address |
| 1.3.6.1.4.1.2272.1.23.3.1.3 | ColumnrcDiagMacConvSteeringDstMac | read-write | current | Destination MAC address |
| 1.3.6.1.4.1.2272.1.23.3.1.4 | ColumnrcDiagMacConvSteeringInPort | read-write | current | IfIndex of ingress port. |
| 1.3.6.1.4.1.2272.1.23.3.1.5 | ColumnrcDiagMacConvSteeringForwardPort | read-write | current | IfIndex of the port where captured traffic should be forwarded to. |
| 1.3.6.1.4.1.2272.1.23.3.1.6 | ColumnrcDiagMacConvSteeringEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.2272.1.23.3.1.7 | ColumnrcDiagMacConvSteeringRowStatus | read-write | current | Used to create/delete entries in the rcDiagMirrorByPortTable. |
| 1.3.6.1.4.1.2272.1.23.4 | TablercDiagVctTable | not-accessible | current | Diag Vct Table |
| 1.3.6.1.4.1.2272.1.23.4.1 | RowrcDiagVctEntry | not-accessible | current | Entry containing cable infomation and test result. |
| 1.3.6.1.4.1.2272.1.23.4.1.1 | ColumnrcDiagVctIfIndex | read-only | current | Port IfIndex. |
| 1.3.6.1.4.1.2272.1.23.4.1.2 | ColumnrcDiagVctNormalCableLength | read-only | current | Cable length, this indicates a range in which the actual length falls. |
| 1.3.6.1.4.1.2272.1.23.4.1.3 | ColumnrcDiagVctPhyType | read-only | current | Phy type, 100MHz throught 1 GHz, or broadcom phy. |
| 1.3.6.1.4.1.2272.1.23.4.1.4 | ColumnrcDiagVctCableStatus | read-only | current | Status of the cable as a whole. The status of a cable is in a sense, a summation of the status of its pairs. If all the pairs are normal, then the cable is nor… |
| 1.3.6.1.4.1.2272.1.23.4.1.5 | ColumnrcDiagVctPair1Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.6 | ColumnrcDiagVctPair1ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.7 | ColumnrcDiagVctPair2Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.8 | ColumnrcDiagVctPair2ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.9 | ColumnrcDiagVctPair3Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.10 | ColumnrcDiagVctPair3ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.11 | ColumnrcDiagVctPair4Status | read-only | current | The status of a single pair in the cable |
| 1.3.6.1.4.1.2272.1.23.4.1.12 | ColumnrcDiagVctPair4ErrLength | read-only | current | Error Pair Length, in meters, measured by Time Domain Reflectometry. |
| 1.3.6.1.4.1.2272.1.23.4.1.13 | ColumnrcDiagVctStartTest | read-write | current | Start VCT test, Set this object to TRUE to perform a VCT test on the current port. A get on this object produces an undefines value. |
| 1.3.6.1.4.1.2272.1.23.4.1.14 | ColumnrcDiagVctTestDone | read-only | current | When a VCT test is started setting rcDiagVctStartTest, this object is immediately set to FALSE by the switch software. It remain FALSE until the test is comple… |
| 1.3.6.1.4.1.2272.1.23.4.1.15 | ColumnrcDiagVctCableCategory | read-only | current | Cable type: CAT3 or CAT5. |
| 1.3.6.1.4.1.2272.1.23.4.1.16 | ColumnrcDiagVctCableLength | read-only | current | Length of cable in meters based on average electrical length of 4 pairs. Measurement can be done when traffic is live or not. |
| 1.3.6.1.4.1.2272.1.23.4.1.17 | ColumnrcDiagVctPair1Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.18 | ColumnrcDiagVctPair1Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.19 | ColumnrcDiagVctPair1Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.4.1.20 | ColumnrcDiagVctPair2Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.21 | ColumnrcDiagVctPair2Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.22 | ColumnrcDiagVctPair2Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.4.1.23 | ColumnrcDiagVctPair3Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.24 | ColumnrcDiagVctPair3Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.25 | ColumnrcDiagVctPair3Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.4.1.26 | ColumnrcDiagVctPair4Polarity | read-only | current | The polarity of a single pair in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.27 | ColumnrcDiagVctPair4Swap | read-only | current | The pair swap in the cable. |
| 1.3.6.1.4.1.2272.1.23.4.1.28 | ColumnrcDiagVctPair4Skew | read-only | current | Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 me… |
| 1.3.6.1.4.1.2272.1.23.10 | ScalarrcDiagSaveConfig | read-write | deprecated | Used to configure whether the various mirror feature settings should be saved and restored across system reboot. |
| 1.3.6.1.4.1.2272.1.23.11 | ScalarrcDiagMirrorByPortTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.12 | ScalarrcDiagPortConvSteeringTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.13 | ScalarrcDiagMacConvSteeringTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.14 | ScalarrcDiagDiagnosticsEnable | read-write | deprecated | Used to enable/disable the mirroring feature for the entire device. This setting overrides any setting in the various mirroring tables. |
| 1.3.6.1.4.1.2272.1.23.15 | NodercDiagPcap | |||
| 1.3.6.1.4.1.2272.1.23.15.1 | ScalarrcDiagPcapEnable | read-write | current | To enable pcap in secondary CPU |
| 1.3.6.1.4.1.2272.1.23.15.2 | ScalarrcDiagPcapBufferWrap | read-write | current | To enable buffer wrap-around when buffer is full. If set, pcap will continue to capture pkts, otherwise stops pkt storing |
| 1.3.6.1.4.1.2272.1.23.15.3 | ScalarrcDiagPcapPcmciaWrap | read-write | current | To wrap around the PCMCIA when saving data in PCMCIA |
| 1.3.6.1.4.1.2272.1.23.15.4 | ScalarrcDiagPcapFrameSize | read-write | current | Number of bytes of pkts needs to be stored |
| 1.3.6.1.4.1.2272.1.23.15.5 | ScalarrcDiagPcapBufferSize | read-write | current | memory to be allocated for capturing the pkt |
| 1.3.6.1.4.1.2272.1.23.15.6 | ScalarrcDiagPcapAutoSave | read-write | current | To save data automatically when buffer is full |
| 1.3.6.1.4.1.2272.1.23.15.7 | ScalarrcDiagPcapAutoSaveFileName | read-write | current | Name of the file in which the pkt is to be stored |
| 1.3.6.1.4.1.2272.1.23.15.8 | ScalarrcDiagPcapAutoSaveDevice | read-write | current | Where to store the captured pkts. If the option is network, the user need to enter an IP address also |
| 1.3.6.1.4.1.2272.1.23.15.9 | ScalarrcDiagPcapAutoSaveNetworkIpAddress | read-write | current | ip address of the remote host where the data needs to be stored. This field is valid only if the device is network |
| 1.3.6.1.4.1.2272.1.23.15.10 | ScalarrcDiagPcapFilterTableSize | read-only | current | Used to indicate the number of entries in the Filter table |
| 1.3.6.1.4.1.2272.1.23.15.11 | TablercDiagPcapFilterTable | not-accessible | current | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.11.1 | RowrcDiagPcapFilterEntry | not-accessible | current | Pcap secondary filter desc |
| 1.3.6.1.4.1.2272.1.23.15.11.1.1 | ColumnrcDiagPcapFilterId | read-only | current | Unique ID that represents the filter |
| 1.3.6.1.4.1.2272.1.23.15.11.1.2 | ColumnrcDiagPcapFilterEnable | read-write | current | Filter is enabled or not |
| 1.3.6.1.4.1.2272.1.23.15.11.1.3 | ColumnrcDiagPcapFilterAction | read-write | current | Action to be takesn when policy is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.4 | ColumnrcDiagPcapFilterSrcMac | read-write | current | Soruce mac address to match |
| 1.3.6.1.4.1.2272.1.23.15.11.1.5 | ColumnrcDiagPcapFilterSrcMask | read-write | current | Soruce mac address mask. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.6 | ColumnrcDiagPcapFilterIsInverseSrcMac | read-write | current | Soruce mac address Inverse. when set the mac addresses otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.7 | ColumnrcDiagPcapFilterDstMac | read-write | current | Destination mac address |
| 1.3.6.1.4.1.2272.1.23.15.11.1.8 | ColumnrcDiagPcapFilterDstMask | read-write | current | Destination mac address mask. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.9 | ColumnrcDiagPcapFilterIsInverseDstMac | read-write | current | Destination mac address Inverse. when set the mac addresses otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.10 | ColumnrcDiagPcapFilterVlanId | read-write | current | Vlan-id of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.11 | ColumnrcDiagPcapFilterToVlanId | read-write | current | To Vlan-id. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.12 | ColumnrcDiagPcapFilterIsInverseVlanId | read-write | current | Vlan-Id Inverse. when set the Vlan-Id otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.13 | ColumnrcDiagPcapFilterPbit | read-write | current | pBit of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.14 | ColumnrcDiagPcapFilterToPbit | read-write | current | To pBit. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.15 | ColumnrcDiagPcapFilterIsInversePbit | read-write | current | pBit Inverse. when set the pBit otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.16 | ColumnrcDiagPcapFilterEtherType | read-write | current | EtherType of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.17 | ColumnrcDiagPcapFilterToEtherType | read-write | current | To EtherType. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.18 | ColumnrcDiagPcapFilterIsInverseEtherType | read-write | current | EtherType Inverse. when set the EtherType otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.19 | ColumnrcDiagPcapFilterProtocolType | read-write | current | ProtocolType of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.20 | ColumnrcDiagPcapFilterToProtocolType | read-write | current | To ProtocolType. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.21 | ColumnrcDiagPcapFilterIsInverseProtocolType | read-write | current | ProtocolType Inverse. when set the ProtocolType otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.22 | ColumnrcDiagPcapFilterSrcIp | read-write | current | Source IP address of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.23 | ColumnrcDiagPcapFilterToSrcIp | read-write | current | To Source IP address. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.24 | ColumnrcDiagPcapFilterIsInverseSrcIp | read-write | current | Source IP address Inverse. when set the source IP otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.25 | ColumnrcDiagPcapFilterDstIp | read-write | current | Destination IP address of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.26 | ColumnrcDiagPcapFilterToDstIp | read-write | current | To Destination IP address. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.27 | ColumnrcDiagPcapFilterIsInverseDstIp | read-write | current | Destination IP address Inverse. when set the Destination IP other than specified is range matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.28 | ColumnrcDiagPcapFilterDscp | read-write | current | DSCP value of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.29 | ColumnrcDiagPcapFilterToDscp | read-write | current | To DSCP. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.30 | ColumnrcDiagPcapFilterIsInverseDscp | read-write | current | DSCP Inverse. when set the DSCP otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.31 | ColumnrcDiagPcapFilterRowStatus | read-write | current | Row Status |
| 1.3.6.1.4.1.2272.1.23.15.11.1.32 | ColumnrcDiagPcapFilterDscpMatchZero | read-write | current | When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be d… |
| 1.3.6.1.4.1.2272.1.23.15.11.1.33 | ColumnrcDiagPcapFilterPbitMatchZero | read-write | current | When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be d… |
| 1.3.6.1.4.1.2272.1.23.15.12 | ScalarrcDiagPcapAdvancedFilterTableSize | read-only | current | Used to indicate the number of entries in the Filter table advanced parameter |
| 1.3.6.1.4.1.2272.1.23.15.13 | TablercDiagPcapAdvancedFilterTable | not-accessible | current | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.13.1 | RowrcDiagPcapAdvancedFilterEntry | not-accessible | current | Pcap secondary Advanced filter desc |
| 1.3.6.1.4.1.2272.1.23.15.13.1.1 | ColumnrcDiagPcapAdvancedFilterId | read-only | current | Unique ID that represents the filter |
| 1.3.6.1.4.1.2272.1.23.15.13.1.2 | ColumnrcDiagPcapAdvancedFilterUdpPort | read-write | current | UdpPort of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.3 | ColumnrcDiagPcapAdvancedFilterToUdpPort | read-write | current | To UdpPort. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.13.1.4 | ColumnrcDiagPcapAdvancedFilterIsInverseUdpPort | read-write | current | UdpPort Inverse. when set the UdpPort otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.5 | ColumnrcDiagPcapAdvancedFilterTcpPort | read-write | current | TcpPort of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.6 | ColumnrcDiagPcapAdvancedFilterToTcpPort | read-write | current | To TcpPort. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.13.1.7 | ColumnrcDiagPcapAdvancedFilterIsInverseTcpPort | read-write | current | TcpPort Inverse. when set the TcpPort otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.8 | ColumnrcDiagPcapAdvancedFilterUserDefinedData | read-write | current | User defined data to match with the packets received |
| 1.3.6.1.4.1.2272.1.23.15.13.1.9 | ColumnrcDiagPcapAdvancedFilterUserDefinedDataSize | read-write | current | Length of user defined data |
| 1.3.6.1.4.1.2272.1.23.15.13.1.10 | ColumnrcDiagPcapAdvancedFilterUserDefinedOffset | read-write | current | Offset from which match has to start |
| 1.3.6.1.4.1.2272.1.23.15.13.1.11 | ColumnrcDiagPcapAdvancedFilterIsInverseUserDefined | read-write | current | TcpPort Inverse. when set the Userdata otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.12 | ColumnrcDiagPcapAdvancedFilterTimer | read-write | current | Timer to start the pcap capture window in ms |
| 1.3.6.1.4.1.2272.1.23.15.13.1.13 | ColumnrcDiagPcapAdvancedFilterPacketCount | read-write | current | Number of packets to be captured before disabling pcap |
| 1.3.6.1.4.1.2272.1.23.15.13.1.14 | ColumnrcDiagPcapAdvancedFilterRefreshTimer | read-write | current | Refresh timer in ms |
| 1.3.6.1.4.1.2272.1.23.15.13.1.15 | ColumnrcDiagPcapAdvancedFilterRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.2272.1.23.15.14 | ScalarrcDiagPcapCopyFileName | read-write | current | Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.15 | ScalarrcDiagPcapResetStat | read-write | current | To Reset PCAP statistics |
| 1.3.6.1.4.1.2272.1.23.15.16 | ScalarrcDiagPcapStatPacketCapacityCount | read-only | current | Packet Capacity Count |
| 1.3.6.1.4.1.2272.1.23.15.17 | ScalarrcDiagPcapStatNumberOfPacketsReceived | read-only | current | Number of packets received in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.18 | ScalarrcDiagPcapStatNumberOfPacketsAccumulated | read-only | current | Number of packets captured in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.19 | ScalarrcDiagPcapStatNumberOfPacketsDroppedInPcapEngine | read-only | current | Number of packets dropped in PCAP engine by filters |
| 1.3.6.1.4.1.2272.1.23.15.20 | ScalarrcDiagPcapStatNumberOfPacketsDroppedInHardware | read-only | current | Number of packets dropped in Hardware |
| 1.3.6.1.4.1.2272.1.23.15.21 | ScalarrcDiagPcapDataValid | read-only | current | A true/false value that indicate the return data whether is valid. |
| 1.3.6.1.4.1.2272.1.23.15.22 | ScalarrcDiagPcapEtherTypeForSvlanLevel | read-write | current | EtherType of svlan level. |
| 1.3.6.1.4.1.2272.1.23.16 | ScalarrcDiagLockupDiagnosticEnable | read-write | current | Used as a flag to enable/disable the lockup diagnostic feature for the R-Modules |
| 1.3.6.1.4.1.2272.1.23.17 | ScalarrcDiagLockupActionEnable | read-write | current | Used as a flag to determine if action is to be taken when lockup is detected for r-modules |
| 1.3.6.1.4.1.2272.1.23.18 | TablercDiagMonitorByIsidTable | not-accessible | current | This table is used to configure the Monitor By Isid feature. This feature allows the device to analyze the packets which got mirrored into isid. |
| 1.3.6.1.4.1.2272.1.23.18.1 | RowrcDiagMonitorByIsidEntry | not-accessible | current | Entry containing monitor by isid information. |
| 1.3.6.1.4.1.2272.1.23.18.1.1 | ColumnrcDiagMonitorByIsidIndex | not-accessible | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.18.1.2 | ColumnrcDiagMonitorByIsidMonitorIsidOffset | read-create | current | Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.18.1.3 | ColumnrcDiagMonitorByIsidMonitorIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to |
| 1.3.6.1.4.1.2272.1.23.18.1.4 | ColumnrcDiagMonitorByIsidEgressPortList | read-create | current | Egress ports to which traffic analyzers are connected. |
| 1.3.6.1.4.1.2272.1.23.18.1.5 | ColumnrcDiagMonitorByIsidEgressMltId | read-create | current | Egress MLT id to which traffic analyzers are connected. |
| 1.3.6.1.4.1.2272.1.23.18.1.6 | ColumnrcDiagMonitorByIsidMapToVlanId | read-create | current | VLAN id to map with mirrored traffic on the monitoring node. |
| 1.3.6.1.4.1.2272.1.23.18.1.7 | ColumnrcDiagMonitorByIsidNickname | read-create | current | Nickname of the BEB from which user wants to analyze the traffic. |
| 1.3.6.1.4.1.2272.1.23.18.1.8 | ColumnrcDiagMonitorByIsidEnable | read-create | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.23.18.1.9 | ColumnrcDiagMonitorByIsidRowStatus | read-create | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.23.19 | TablercDiagIsidMirroringStatsTable | not-accessible | current | This table is used to show/clear number of packets which got mirrored into isid. |
| 1.3.6.1.4.1.2272.1.23.19.1 | RowrcDiagIsidMirroringStatsEntry | not-accessible | current | Entry containing isid mirroring stats information. |
| 1.3.6.1.4.1.2272.1.23.19.1.1 | ColumnrcDiagIsidMirroringStatsIndex | not-accessible | current | Offset id value which is mapped to actual monitor I-SID value. |
| 1.3.6.1.4.1.2272.1.23.19.1.2 | ColumnrcDiagIsidMirroringStatsMonitorIsid | read-only | current | Actual monitor I-SID value in which packets are mirrored to. |
| 1.3.6.1.4.1.2272.1.23.19.1.3 | ColumnrcDiagIsidMirroringStatsMirroredPackets | read-only | current | Number of packets mirrored into ISID on the mirroring BEB. |
| 1.3.6.1.4.1.2272.1.23.19.1.4 | ColumnrcDiagIsidMirroringStatsClearStats | read-write | current | Used to clear the ISID mirroring statistics. |