RC-IP-ROUTING-MIB
91 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| IF-MIB | InterfaceIndex |
| RAPID-CITY | rcIp |
| RC-IP-MIB | rcIpInterVrfStaticRoute rcIpRouting rcIpStaticRoute |
| RC-VRF-MIB | VrfIdentifier |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.8.4.0 | IdentityrcIpRoutingMib | Enterprise MIB for the Accelar product family. | ||
| 1.3.6.1.4.1.2272.1.8.4.1 | NodercIpRoutingRedistributeRipToOspf | |||
| 1.3.6.1.4.1.2272.1.8.4.1.1 | ScalarrcIpRoutingRedistributeRipToOspfEnable | read-write | obsolete | Used to indicate whether or not to Redistribute RIP routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.1.2 | ScalarrcIpRoutingRedistributeRipToOspfExplicitMetric | read-write | obsolete | Value of metric that is used to translate the RIP route to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.1.3 | ScalarrcIpRoutingRedistributeRipToOspfUseExplicitMetric | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing RIP routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.1.4 | ScalarrcIpRoutingRedistributeRipToOspfExternalMetricType | read-write | obsolete | Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = inte… |
| 1.3.6.1.4.1.2272.1.8.4.2 | NodercIpRoutingRedistributeOspfToRip | |||
| 1.3.6.1.4.1.2272.1.8.4.2.1 | ScalarrcIpRoutingRedistributeOspfToRipEnable | read-write | obsolete | Used to indicate whether or not to redistribute OSPF routes to RIP. |
| 1.3.6.1.4.1.2272.1.8.4.2.2 | ScalarrcIpRoutingRedistributeOspfToRipExplicitMetric | read-write | obsolete | Value of metric that is used to translate the OSPF route to RIP. |
| 1.3.6.1.4.1.2272.1.8.4.2.3 | ScalarrcIpRoutingRedistributeOspfToRipUseExplicitMetric | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing OSPF routes to RIP. |
| 1.3.6.1.4.1.2272.1.8.4.3 | NodercIpRoutingRedistributeDirectToOspf | |||
| 1.3.6.1.4.1.2272.1.8.4.3.1 | ScalarrcIpRoutingRedistributeDirectToOspfEnable | read-write | obsolete | Used to indicate whether directly connected networks through non-ospf interfaces are distributed to OSPF database or not. If set to true all the static routes … |
| 1.3.6.1.4.1.2272.1.8.4.3.2 | ScalarrcIpRoutingRedistributeDirectToOspfMethod | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing direct routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.3.3 | ScalarrcIpRoutingRedistributeDirectToOspfExplicitMetric | read-write | obsolete | Value of metric that is used to translate the routes to directly connected networks to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.3.4 | ScalarrcIpRoutingRedistributeDirectToOspfExternalMetricType | read-write | obsolete | Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = inte… |
| 1.3.6.1.4.1.2272.1.8.4.4 | NodercIpRoutingRedistributeStaticToOspf | |||
| 1.3.6.1.4.1.2272.1.8.4.4.1 | ScalarrcIpRoutingRedistributeStaticToOspfEnable | read-write | obsolete | Used to indicate whether static routes (that are configured locally through management protocol) are distributed to OSPF database or not. If set to true all th… |
| 1.3.6.1.4.1.2272.1.8.4.4.2 | ScalarrcIpRoutingRedistributeStaticToOspfExplicitMetric | read-write | obsolete | Value of metric that is used to translate the static routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.4.3 | ScalarrcIpRoutingRedistributeStaticToOspfUseExplicitMetric | read-write | obsolete | Used to indicate whether or not to use the user specified default metric for redistributing static routes to OSPF. |
| 1.3.6.1.4.1.2272.1.8.4.4.4 | ScalarrcIpRoutingRedistributeStaticToOspfExternalMetricType | read-write | obsolete | Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = inte… |
| 1.3.6.1.4.1.2272.1.8.4.4.5 | ScalarrcIpRoutingRedistributeStaticToOspfAdvertDefRte | read-write | obsolete | Used to indicate whether default route (that are configured locally through management protocol) should be distributed to OSPF database or not. If set to true … |
| 1.3.6.1.4.1.2272.1.8.4.5 | NodercIpRoutingRedistributeDirectToRip | |||
| 1.3.6.1.4.1.2272.1.8.4.5.1 | ScalarrcIpRoutingRedistributeDirectToRipEnable | read-write | obsolete | Used to indicate whether directly connected networks through non-rip interfaces are distributed to RIP or not. |
| 1.3.6.1.4.1.2272.1.8.4.6 | NodercIpRoutingRedistributeStaticToRip | |||
| 1.3.6.1.4.1.2272.1.8.4.6.1 | ScalarrcIpRoutingRedistributeStaticToRipEnable | read-write | obsolete | Used to indicate whether static routes (that are configured locally through management protocol) are distributed to RIP database or not. If set to true all the… |
| 1.3.6.1.4.1.2272.1.8.4.7 | NodercIpRoutingNumRoutesScalars | |||
| 1.3.6.1.4.1.2272.1.8.4.7.1 | ScalarrcIpRoutingNumRoutesMaximumTotal | read-write | obsolete | The maximum total number of routes allowed. |
| 1.3.6.1.4.1.2272.1.8.4.7.2 | ScalarrcIpRoutingNumRoutesMaximumLocal | read-write | obsolete | The maximum number of local routes allowed. |
| 1.3.6.1.4.1.2272.1.8.4.7.3 | ScalarrcIpRoutingNumRoutesMaximumStatic | read-write | obsolete | The maximum number of static routes allowed. |
| 1.3.6.1.4.1.2272.1.8.4.7.4 | ScalarrcIpRoutingNumRoutesCurrentTotal | read-write | obsolete | The current total number of routes. |
| 1.3.6.1.4.1.2272.1.8.4.7.5 | ScalarrcIpRoutingNumRoutesCurrentLocal | read-write | obsolete | The current number of local routes. |
| 1.3.6.1.4.1.2272.1.8.4.7.6 | ScalarrcIpRoutingNumRoutesCurrentStatic | read-write | obsolete | The current number of static routes. |
| 1.3.6.1.4.1.2272.1.8.4.8 | TablercIpSourceInterfaceTable | not-accessible | current | Table used to maintain source address information. |
| 1.3.6.1.4.1.2272.1.8.4.8.1 | RowrcIpSourceInterfaceEntry | not-accessible | current | An entry of Ip Source Interface Table. |
| 1.3.6.1.4.1.2272.1.8.4.8.1.1 | ColumnrcIpSourceInterfaceAppId | not-accessible | current | The application which can be set to use a specific interface as source IP address in packets sent from the switch. |
| 1.3.6.1.4.1.2272.1.8.4.8.1.2 | ColumnrcIpSourceInterfaceType | read-write | current | The type of source address used. |
| 1.3.6.1.4.1.2272.1.8.4.8.1.3 | ColumnrcIpSourceInterfaceId | read-write | current | The ID of the interface used as source address. An ID of 0 means no interface is currently set for this entry. |
| 1.3.6.1.4.1.2272.1.8.7 | TablercIpRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.2272.1.8.7.1 | RowrcIpRouteEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.7.1.1 | ColumnrcIpRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.7.1.2 | ColumnrcIpRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.7.1.3 | ColumnrcIpRouteNextHop | read-create | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.7.1.4 | ColumnrcIpRouteMetric | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.7.1.5 | ColumnrcIpRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.7.1.6 | ColumnrcIpRouteType | read-only | current | The type of route. |
| 1.3.6.1.4.1.2272.1.8.7.1.7 | ColumnrcIpRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.2272.1.8.7.1.8 | ColumnrcIpRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.2272.1.8.7.1.9 | ColumnrcIpRouteRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.7.1.10 | ColumnrcIpRoutePref | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.7.1.11 | ColumnrcIpRouteAltSequence | read-only | current | Alternative Route Sequence. 0 denotes Best Route. |
| 1.3.6.1.4.1.2272.1.8.7.1.12 | ColumnrcIpRoutePathType | read-only | current | The type of route. It is a combination of direct, indirect, best, alternative and ECMP path. |
| 1.3.6.1.4.1.2272.1.8.7.1.13 | ColumnrcIpRouteSrcVrfId | read-create | current | srcVrfId of next-hop address |
| 1.3.6.1.4.1.2272.1.8.7.1.14 | ColumnrcIpRouteNextHopId | read-only | current | Identifier of the next-hop, hostname or mac adress. |
| 1.3.6.1.4.1.2272.1.8.7.1.15 | ColumnrcIpRouteLayer3VirtualInterfaceType | read-only | current | Identifies type for value specified in the rcIpRouteLayer3VirtualInterface field. |
| 1.3.6.1.4.1.2272.1.8.7.1.16 | ColumnrcIpRouteLayer3VirtualInterface | read-only | current | Identifier of the Layer3 Virtual Interface. When the value is an SPB I-SID, 0 denotes GlobalRouter and -1 denotes not applicable to route. |
| 1.3.6.1.4.1.2272.1.8.15.1 | ScalarrcIpStaticRouteTableSize | read-only | current | size of Ip Static Route Table. |
| 1.3.6.1.4.1.2272.1.8.15.2 | TablercIpStaticRouteTable | not-accessible | current | This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is ac… |
| 1.3.6.1.4.1.2272.1.8.15.2.1 | RowrcIpStaticRouteEntry | not-accessible | current | A static route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.15.2.1.1 | ColumnrcIpStaticRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.2 | ColumnrcIpStaticRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.3 | ColumnrcIpStaticRouteNextHop | read-only | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.4 | ColumnrcIpStaticRouteMetric | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.5 | ColumnrcIpStaticRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.6 | ColumnrcIpStaticRoutePreference | read-create | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.8.15.2.1.7 | ColumnrcIpStaticRouteEnable | read-create | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.8.15.2.1.8 | ColumnrcIpStaticRouteStatus | read-only | current | Used to indicate the current status of this entry. |
| 1.3.6.1.4.1.2272.1.8.15.2.1.9 | ColumnrcIpStaticRouteRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.15.2.1.10 | ColumnrcIpStaticRouteLocalNextHop | read-create | current | Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the… |
| 1.3.6.1.4.1.2272.1.8.15.3 | ScalarrcIpStaticRouteBfdTableSize | read-only | current | size of IP static route BFD table. |
| 1.3.6.1.4.1.2272.1.8.15.4 | TablercIpStaticRouteBfdTable | not-accessible | current | This table is used to hold next hop addresses on which BFD is enabled. |
| 1.3.6.1.4.1.2272.1.8.15.4.1 | RowrcIpStaticRouteBfdEntry | not-accessible | current | An IP address of the next hop of the BFD session. |
| 1.3.6.1.4.1.2272.1.8.15.4.1.1 | ColumnrcIpStaticRouteBfdNextHop | read-only | current | The IP address of the next hop of the BFD session. |
| 1.3.6.1.4.1.2272.1.8.15.4.1.2 | ColumnrcIpStaticRouteBfdRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.15.4.1.3 | ColumnrcIpStaticRouteBfdVrfId | read-create | current | Indicates the Virtual Router to which the IPv4 static route BFD instance belongs. |
| 1.3.6.1.4.1.2272.1.8.15.4.1.4 | ColumnrcIpStaticRouteBfdVrfName | read-only | current | The Name of the Virtual Router to which the IPv4 static route BFD instance belongs. |
| 1.3.6.1.4.1.2272.1.8.103.1 | ScalarrcIpInterVrfStaticRouteTableSize | read-only | current | size of Ip Static Route Table. |
| 1.3.6.1.4.1.2272.1.8.103.2 | TablercIpInterVrfStaticRouteTable | not-accessible | current | This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is ac… |
| 1.3.6.1.4.1.2272.1.8.103.2.1 | RowrcIpInterVrfStaticRouteEntry | not-accessible | current | A static route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.1 | ColumnrcIpInterVrfStaticRouteOwnerVrfId | not-accessible | current | Owner VRF id of the static route |
| 1.3.6.1.4.1.2272.1.8.103.2.1.2 | ColumnrcIpInterVrfStaticRouteDest | not-accessible | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.3 | ColumnrcIpInterVrfStaticRouteMask | not-accessible | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.4 | ColumnrcIpInterVrfStaticRouteNextHop | not-accessible | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.5 | ColumnrcIpInterVrfStaticRouteMetric | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.6 | ColumnrcIpInterVrfStaticRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.7 | ColumnrcIpInterVrfStaticRoutePreference | read-create | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.8 | ColumnrcIpInterVrfStaticRouteEnable | read-create | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.9 | ColumnrcIpInterVrfStaticRouteStatus | read-only | current | Used to indicate the current status of this entry. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.10 | ColumnrcIpInterVrfStaticRouteRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.103.2.1.11 | ColumnrcIpInterVrfStaticRouteLocalNextHop | read-create | current | Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.12 | ColumnrcIpInterVrfStaticRouteNextHopVrfId | read-create | current | Used to indicate nhVrfId in inter-VRF static-route configuration |
| 1.3.6.1.4.1.2272.1.8.103.2.1.13 | ColumnrcIpInterVrfStaticRouteName | read-create | current | An administratively-assigned name for this static route |