RC-MLD-MIB
63 objects
Enterprise MIB for the MLD mibs.
Imported Objects
| IF-MIB | InterfaceIndex |
| IPV6-TC | Ipv6Address |
| RAPID-CITY | EnableValue PortSet rcMld |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.215.0 | IdentityrcMldMib | Enterprise MIB for the MLD mibs. | ||
| 1.3.6.1.4.1.2272.1.215.1 | NodercMldObjects | |||
| 1.3.6.1.4.1.2272.1.215.1.1 | TablercMldNewGroupTable | not-accessible | current | The (conceptual) table listing the multicast groups configured in the device. |
| 1.3.6.1.4.1.2272.1.215.1.1.1 | RowrcMldNewGroupEntry | not-accessible | current | An entry (conceptual row) representing an Mld group. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.1 | ColumnrcMldNewGroupIpv6Address | not-accessible | current | Multicast Group Address that others want to join to. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.2 | ColumnrcMldNewGroupMembers | not-accessible | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.3 | ColumnrcMldNewGroupInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.4 | ColumnrcMldNewGroupExpiration | read-only | current | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| 1.3.6.1.4.1.2272.1.215.1.1.1.5 | ColumnrcMldNewGroupIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.2 | TablercMldInterfaceExtnTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.215.1.2.1 | RowrcMldInterfaceExtnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.215.1.2.1.1 | ColumnrcMldInterfaceExtnIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN) |
| 1.3.6.1.4.1.2272.1.215.1.2.1.2 | ColumnrcMldInterfaceExtnSnoopEnable | read-write | current | Enable snoop on interface |
| 1.3.6.1.4.1.2272.1.215.1.2.1.16 | ColumnrcMldInterfaceExtnFlushAction | read-write | current | MLD flush action |
| 1.3.6.1.4.1.2272.1.215.1.2.1.18 | ColumnrcMldInterfaceExtnSsmEnable | read-write | current | Enable SSM. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.25 | ColumnrcMldInterfaceExtnNewQuerier | read-only | current | The address of the new MLD querier. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.30 | ColumnrcMldInterfaceExtnDynamicDowngradeEnable | read-write | current | enable dynamic downgrade the MLD version when older version query message was received. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.32 | ColumnrcMldInterfaceExtnOperVersion | read-only | current | The operational version of MLD which is running on this interface. |
| 1.3.6.1.4.1.2272.1.215.1.2.1.34 | ColumnrcMldInterfaceExtnMcastMode | read-only | current | MLD interface mode. |
| 1.3.6.1.4.1.2272.1.215.1.3 | NodercMldSsmGlobal | |||
| 1.3.6.1.4.1.2272.1.215.1.3.1 | ScalarrcMldSsmGlobalRangeGroup | read-only | current | If multicast group address & RangeMask == RangeGroup, then RangeGroup is in Ssm Range. Else it is not in the range. |
| 1.3.6.1.4.1.2272.1.215.1.3.2 | ScalarrcMldSsmGlobalRangeMask | read-only | current | Used with RangeGroup. |
| 1.3.6.1.4.1.2272.1.215.1.4 | TablercMldSnoopTraceTable | not-accessible | current | The table listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.215.1.4.1 | RowrcMldSnoopTraceEntry | not-accessible | current | The entry listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.215.1.4.1.1 | ColumnrcMldSnoopGrpAddr | not-accessible | current | Ip multicast address of group traversing the router |
| 1.3.6.1.4.1.2272.1.215.1.4.1.2 | ColumnrcMldSnoopSrcAddr | not-accessible | current | Ip source address of the multicast group address |
| 1.3.6.1.4.1.2272.1.215.1.4.1.3 | ColumnrcMldSnoopOutVlan | not-accessible | current | Egress vlan id for the multicast group |
| 1.3.6.1.4.1.2272.1.215.1.4.1.4 | ColumnrcMldSnoopInPort | read-only | current | Ingress port for the multicast group |
| 1.3.6.1.4.1.2272.1.215.1.4.1.5 | ColumnrcMldSnoopInVlan | read-only | current | Ingress vlan id for the multicast source |
| 1.3.6.1.4.1.2272.1.215.1.4.1.6 | ColumnrcMldSnoopOutPort | read-only | current | Egress port of the multicast group |
| 1.3.6.1.4.1.2272.1.215.1.4.1.7 | ColumnrcMldSnoopType | read-only | current | The port type on which the snoop entry is learnt |
| 1.3.6.1.4.1.2272.1.215.1.5 | TablercMldv2CacheTable | not-accessible | current | The (conceptual) table listing the MLDv2 specific data corresponding to each interface, port and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.215.1.5.1 | RowrcMldv2CacheEntry | not-accessible | current | An entry (conceptual row) representing an Mldv2 Group. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.1 | ColumnrcMldv2CacheEntryGroupAddress | not-accessible | current | Multicast group Address that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.2 | ColumnrcMldv2CacheEntryIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.3 | ColumnrcMldv2CacheEntryInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.1.5.1.5 | ColumnrcMldv2CacheEntryVersion1HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any MLD version 1 members on the IP subnet attached to this interface. This entr… |
| 1.3.6.1.4.1.2272.1.215.1.5.1.6 | ColumnrcMldv2CacheEntrySourceFilterMode | read-only | current | The current group state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.215.1.6 | TablercMldRouterSrcListTable | not-accessible | current | The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.215.1.6.1 | RowrcMldRouterSrcListEntry | not-accessible | current | An entry (conceptual row) representing an Mld Source. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.1 | ColumnrcMldRouterSrcListGroupAddress | not-accessible | current | The IPv6 multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.2 | ColumnrcMldRouterSrcListIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.3 | ColumnrcMldRouterSrcListInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.4 | ColumnrcMldRouterSrcListHostAddress | not-accessible | current | The host address to which this entry corresponds. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.5 | ColumnrcMldRouterSrcListMemberAddress | not-accessible | current | IPv6 Address of a member that has sent source specific report wishing to join this source. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.6 | ColumnrcMldRouterSrcListExpire | read-only | current | This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to … |
| 1.3.6.1.4.1.2272.1.215.1.6.1.7 | ColumnrcMldRouterSrcListMode | read-only | current | The current member state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.215.1.6.1.8 | ColumnrcMldRouterSrcListMemberExpire | read-only | current | This value indicates the time until the member for this source will expire |
| 1.3.6.1.4.1.2272.1.215.1.7 | TablercMldSenderTable | not-accessible | current | The (conceptual) table listing the multicast senders. |
| 1.3.6.1.4.1.2272.1.215.1.7.1 | RowrcMldSenderEntry | not-accessible | current | An entry (conceptual row) representing an MLD senser. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.1 | ColumnrcMldSenderGrpAddr | not-accessible | current | IPv6 multicast group address. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.2 | ColumnrcMldSenderIfIndex | not-accessible | current | Interface index of the sender. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.3 | ColumnrcMldSenderMemberAddr | not-accessible | current | Ipv6 Host Address. |
| 1.3.6.1.4.1.2272.1.215.1.7.1.4 | ColumnrcMldSenderAction | read-write | current | none(1), flushEntry(2), flushGrp(3). |
| 1.3.6.1.4.1.2272.1.215.1.7.1.5 | ColumnrcMldSenderPort | read-only | current | Mld Sender port. |
| 1.3.6.1.4.1.2272.1.215.2 | NodercMldNotification | |||
| 1.3.6.1.4.1.2272.1.215.2.1 | ScalarrcMldNotificationInterfaceIfIndex | accessible-for-notify | current | The internetwork-layer interface value of the interface for which MLD is enabled. |
| 1.3.6.1.4.1.2272.1.215.2.2 | ScalarrcMldNotificationNewGroupIpv6Address | accessible-for-notify | current | Multicast Group Address that others want to join to. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.215.2.3 | ScalarrcMldNotificationNewGroupMembers | accessible-for-notify | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.215.2.4 | ScalarrcMldNotificationNewGroupInPort | accessible-for-notify | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.215.3 | NodercMldGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.215.3.1 | ScalarrcMldGenerateTrap | read-write | current | Enabling the MLD to generate trap. |
| 1.3.6.1.4.1.2272.1.215.3.2 | ScalarrcMldGenerateLog | read-write | current | Enabling the MLD to generate log. |