MIB Viewer

RC-PIM-MIB

51 objects
Enterprise MIB for the Accelar product family.
Imported Objects
IF-MIBInterfaceIndexOrZero
RAPID-CITYrcPim
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIexperimental Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.2272.1.75.0IdentityrcPimMibEnterprise MIB for the Accelar product family.
1.3.6.1.4.1.2272.1.75.1NodercPimMIBObjects
1.3.6.1.4.1.2272.1.75.1.1NodercPimScalars
1.3.6.1.4.1.2272.1.75.1.1.1ScalarrcPimJoinPruneIntervalread-writecurrentThe default interval at which periodic PIM-SM Join/Prune messages are to be sent.
1.3.6.1.4.1.2272.1.75.1.2TablercPimInterfaceTablenot-accessiblecurrentThe (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table.
1.3.6.1.4.1.2272.1.75.1.2.1RowrcPimInterfaceEntrynot-accessiblecurrentAn entry (conceptual row) in the rcPimInterfaceTable.
1.3.6.1.4.1.2272.1.75.1.2.1.1ColumnrcPimInterfaceIfIndexnot-accessiblecurrentThe ifIndex value of this PIM interface.
1.3.6.1.4.1.2272.1.75.1.2.1.2ColumnrcPimInterfaceAddressread-onlycurrentThe IP address of the PIM interface.
1.3.6.1.4.1.2272.1.75.1.2.1.3ColumnrcPimInterfaceNetMaskread-onlycurrentThe network mask for the IP address of the PIM interface.
1.3.6.1.4.1.2272.1.75.1.2.1.4ColumnrcPimInterfaceModeread-createcurrentThe configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
1.3.6.1.4.1.2272.1.75.1.2.1.5ColumnrcPimInterfaceDRread-onlycurrentThe Designated Router on this PIM interface. For point- to-point interfaces, this object has the value 0.0.0.0.
1.3.6.1.4.1.2272.1.75.1.2.1.6ColumnrcPimInterfaceHelloIntervalread-createcurrentThe frequency at which PIM Hello messages are transmitted on this interface.
1.3.6.1.4.1.2272.1.75.1.2.1.7ColumnrcPimInterfaceStatusread-createcurrentThe status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.
1.3.6.1.4.1.2272.1.75.1.2.1.8ColumnrcPimInterfaceJoinPruneIntervalread-createcurrentThe frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the rcPimJoinPruneInterval.
1.3.6.1.4.1.2272.1.75.1.2.1.9ColumnrcPimInterfaceCBSRPreferenceread-createcurrentThe preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate B…
1.3.6.1.4.1.2272.1.75.1.2.1.10ColumnrcPimInterfaceCBSREnableread-createcurrentEnable/disable Candidate BSR on rcPim local interface.
1.3.6.1.4.1.2272.1.75.1.3TablercPimNeighborTablenot-accessiblecurrentThe (conceptual) table listing the router's PIM neighbors.
1.3.6.1.4.1.2272.1.75.1.3.1RowrcPimNeighborEntrynot-accessiblecurrentAn entry (conceptual row) in the rcPimNeighborTable.
1.3.6.1.4.1.2272.1.75.1.3.1.1ColumnrcPimNeighborAddressnot-accessiblecurrentThe IP address of the PIM neighbor for which this entry contains information.
1.3.6.1.4.1.2272.1.75.1.3.1.2ColumnrcPimNeighborIfIndexread-onlycurrentThe value of ifIndex for the interface used to reach this PIM neighbor.
1.3.6.1.4.1.2272.1.75.1.3.1.3ColumnrcPimNeighborUpTimeread-onlycurrentThe time since this PIM neighbor (last) became a neighbor of the local router.
1.3.6.1.4.1.2272.1.75.1.3.1.4ColumnrcPimNeighborExpiryTimeread-onlycurrentThe minimum time remaining before this PIM neighbor will be aged out.
1.3.6.1.4.1.2272.1.75.1.6TablercPimRPSetTablenot-accessiblecurrentThe (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio…
1.3.6.1.4.1.2272.1.75.1.6.1RowrcPimRPSetEntrynot-accessiblecurrentAn entry (conceptual row) in the rcPimRPSetTable.
1.3.6.1.4.1.2272.1.75.1.6.1.1ColumnrcPimRPSetGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with rcPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candid…
1.3.6.1.4.1.2272.1.75.1.6.1.2ColumnrcPimRPSetGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with rcPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the C…
1.3.6.1.4.1.2272.1.75.1.6.1.3ColumnrcPimRPSetAddressnot-accessiblecurrentThe IP address of the Candidate-RP.
1.3.6.1.4.1.2272.1.75.1.6.1.4ColumnrcPimRPSetHoldTimeread-onlycurrentThe holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.
1.3.6.1.4.1.2272.1.75.1.6.1.5ColumnrcPimRPSetExpiryTimeread-onlycurrentThe minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
1.3.6.1.4.1.2272.1.75.1.6.1.6ColumnrcPimRPSetComponentnot-accessiblecurrentA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.2272.1.75.1.11TablercPimCandidateRPTablenot-accessiblecurrentThe (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of rcPimCandidateRPHo…
1.3.6.1.4.1.2272.1.75.1.11.1RowrcPimCandidateRPEntrynot-accessiblecurrentAn entry (conceptual row) in the rcPimCandidateRPTable.
1.3.6.1.4.1.2272.1.75.1.11.1.1ColumnrcPimCandidateRPGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with rcPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself …
1.3.6.1.4.1.2272.1.75.1.11.1.2ColumnrcPimCandidateRPGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with rcPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itsel…
1.3.6.1.4.1.2272.1.75.1.11.1.3ColumnrcPimCandidateRPAddressread-onlycurrentThe (unicast) address of the interface which will be advertised as a Candidate-RP.
1.3.6.1.4.1.2272.1.75.1.11.1.4ColumnrcPimCandidateRPRowStatusread-createcurrentThe status of this row, by which new entries may be created, or old entries deleted from this table.
1.3.6.1.4.1.2272.1.75.1.12TablercPimComponentTablenot-accessiblecurrentThe (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected.
1.3.6.1.4.1.2272.1.75.1.12.1RowrcPimComponentEntrynot-accessiblecurrentAn entry (conceptual row) in the rcPimComponentTable.
1.3.6.1.4.1.2272.1.75.1.12.1.1ColumnrcPimComponentIndexnot-accessiblecurrentA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.2272.1.75.1.12.1.2ColumnrcPimComponentBSRAddressread-onlycurrentThe IP address of the bootstrap router (BSR) for the local PIM region.
1.3.6.1.4.1.2272.1.75.1.12.1.3ColumnrcPimComponentBSRExpiryTimeread-onlycurrentThe minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component send…
1.3.6.1.4.1.2272.1.75.1.12.1.4ColumnrcPimComponentCRPHoldTimeread-createcurrentThe holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.
1.3.6.1.4.1.2272.1.75.1.12.1.5ColumnrcPimComponentStatusread-createcurrentThe status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.
1.3.6.1.4.1.2272.1.75.2NodercPimMIBConformance
1.3.6.1.4.1.2272.1.75.2.1NodercPimMIBCompliances
1.3.6.1.4.1.2272.1.75.2.1.2CompliancercPimSparseV2MIBComplianceread-onlycurrentThe compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB.
1.3.6.1.4.1.2272.1.75.2.1.3CompliancercPimDenseV2MIBComplianceread-onlycurrentThe compliance statement for routers running PIM Dense Mode and implementing the PIM MIB.
1.3.6.1.4.1.2272.1.75.2.2NodercPimMIBGroups
1.3.6.1.4.1.2272.1.75.2.2.2GrouprcPimV2MIBGroupcurrentA collection of objects to support management of PIM Sparse Mode (version 2) routers.
1.3.6.1.4.1.2272.1.75.2.2.3GrouprcPimV2CandidateRPMIBGroupcurrentA collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP.
1.3.6.1.4.1.2272.1.75.2.2.5GrouprcPimDenseV2MIBGroupcurrentA collection of objects to support management of PIM Dense Mode (version 2) routers.