RC-POM-MIB
119 objects
OE MIB for Digital Diagnostic Monitoring of pluggable optical modules
Imported Objects
| IF-MIB | InterfaceIndex |
| RAPID-CITY | EnableValue rcPlugOptMod |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.71.0 | IdentityrcPlugOptModTableMib | OE MIB for Digital Diagnostic Monitoring of pluggable optical modules | ||
| 1.3.6.1.4.1.2272.1.71.1 | TablercPlugOptModTable | not-accessible | current | Gibc SFF diagnostic info table |
| 1.3.6.1.4.1.2272.1.71.1.1 | RowrcPlugOptModEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.71.1.1.1 | ColumnrcPlugOptModPortIndex | not-accessible | current | An index value that uniquely identifies a port on a blade or line-card. |
| 1.3.6.1.4.1.2272.1.71.1.1.2 | ColumnrcPlugOptModDdmStatusMask | read-only | current | Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. |
| 1.3.6.1.4.1.2272.1.71.1.1.3 | ColumnrcPlugOptModCalibration | read-only | current | The identifier value indicates type of calibration. |
| 1.3.6.1.4.1.2272.1.71.1.1.4 | ColumnrcPlugOptModPowerMeasure | read-only | current | The identifier value indicates type of external power. |
| 1.3.6.1.4.1.2272.1.71.1.1.5 | ColumnrcPlugOptModConnectorType | read-only | current | The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name tha… |
| 1.3.6.1.4.1.2272.1.71.1.1.6 | ColumnrcPlugOptModVendorName | read-only | current | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the fu… |
| 1.3.6.1.4.1.2272.1.71.1.1.7 | ColumnrcPlugOptModVendorPartNumber | read-only | current | The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part numb… |
| 1.3.6.1.4.1.2272.1.71.1.1.8 | ColumnrcPlugOptModVendorRevNumber | read-only | current | The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor produc… |
| 1.3.6.1.4.1.2272.1.71.1.1.9 | ColumnrcPlugOptModVendorSN | read-only | current | The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor se… |
| 1.3.6.1.4.1.2272.1.71.1.1.10 | ColumnrcPlugOptModVendorDateCode | read-only | current | The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low orde… |
| 1.3.6.1.4.1.2272.1.71.1.1.11 | ColumnrcPlugOptModPEC | read-only | current | This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, … |
| 1.3.6.1.4.1.2272.1.71.1.1.12 | ColumnrcPlugOptModCLEI | read-only | current | This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telc… |
| 1.3.6.1.4.1.2272.1.71.1.1.13 | ColumnrcPlugOptModSupportsDDM | read-only | current | This boolean indicates whether or not the device supports the DDM capability. |
| 1.3.6.1.4.1.2272.1.71.1.1.14 | ColumnrcPlugOptModAux1Monitoring | read-only | current | This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 T… |
| 1.3.6.1.4.1.2272.1.71.1.1.15 | ColumnrcPlugOptModAux2Monitoring | read-only | current | This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved… |
| 1.3.6.1.4.1.2272.1.71.1.1.16 | ColumnrcPlugOptModWaveLength | read-only | current | Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters. |
| 1.3.6.1.4.1.2272.1.71.1.1.17 | ColumnrcPlugOptModTemperature | read-only | current | This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0… |
| 1.3.6.1.4.1.2272.1.71.1.1.18 | ColumnrcPlugOptModTemperatureHighAlarmThreshold | read-only | current | This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expr… |
| 1.3.6.1.4.1.2272.1.71.1.1.19 | ColumnrcPlugOptModTemperatureLowAlarmThreshold | read-only | current | This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is ex… |
| 1.3.6.1.4.1.2272.1.71.1.1.20 | ColumnrcPlugOptModTemperatureHighWarningThreshold | read-only | current | This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asse… |
| 1.3.6.1.4.1.2272.1.71.1.1.21 | ColumnrcPlugOptModTemperatureLowWarningThreshold | read-only | current | This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is as… |
| 1.3.6.1.4.1.2272.1.71.1.1.22 | ColumnrcPlugOptModVoltage | read-only | current | This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV. |
| 1.3.6.1.4.1.2272.1.71.1.1.23 | ColumnrcPlugOptModVoltageHighAlarmThreshold | read-only | current | This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive num… |
| 1.3.6.1.4.1.2272.1.71.1.1.24 | ColumnrcPlugOptModVoltageLowAlarmThreshold | read-only | current | This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive n… |
| 1.3.6.1.4.1.2272.1.71.1.1.25 | ColumnrcPlugOptModVoltageHighWarningThreshold | read-only | current | This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It i… |
| 1.3.6.1.4.1.2272.1.71.1.1.26 | ColumnrcPlugOptModVoltageLowWarningThreshold | read-only | current | This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It… |
| 1.3.6.1.4.1.2272.1.71.1.1.27 | ColumnrcPlugOptModBias | read-only | current | This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 microamps and can range from 0 to… |
| 1.3.6.1.4.1.2272.1.71.1.1.28 | ColumnrcPlugOptModBiasHighAlarmThreshold | read-only | current | This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a p… |
| 1.3.6.1.4.1.2272.1.71.1.1.29 | ColumnrcPlugOptModBiasLowAlarmThreshold | read-only | current | This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a posit… |
| 1.3.6.1.4.1.2272.1.71.1.1.30 | ColumnrcPlugOptModBiasHighWarningThreshold | read-only | current | This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted.… |
| 1.3.6.1.4.1.2272.1.71.1.1.31 | ColumnrcPlugOptModBiasLowWarningThreshold | read-only | current | This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserte… |
| 1.3.6.1.4.1.2272.1.71.1.1.32 | ColumnrcPlugOptModTxPower | read-only | current | This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535… |
| 1.3.6.1.4.1.2272.1.71.1.1.33 | ColumnrcPlugOptModTxPowerHighAlarmThreshold | read-only | current | This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is ass… |
| 1.3.6.1.4.1.2272.1.71.1.1.34 | ColumnrcPlugOptModTxPowerLowAlarmThreshold | read-only | current | This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is a… |
| 1.3.6.1.4.1.2272.1.71.1.1.35 | ColumnrcPlugOptModTxPowerHighWarningThreshold | read-only | current | This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power hig… |
| 1.3.6.1.4.1.2272.1.71.1.1.36 | ColumnrcPlugOptModTxPowerLowWarningThreshold | read-only | current | This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power … |
| 1.3.6.1.4.1.2272.1.71.1.1.37 | ColumnrcPlugOptModRxPower | read-only | current | This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 … |
| 1.3.6.1.4.1.2272.1.71.1.1.38 | ColumnrcPlugOptModRxPowerHighAlarmThreshold | read-only | current | This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted.… |
| 1.3.6.1.4.1.2272.1.71.1.1.39 | ColumnrcPlugOptModRxPowerLowAlarmThreshold | read-only | current | This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserte… |
| 1.3.6.1.4.1.2272.1.71.1.1.40 | ColumnrcPlugOptModRxPowerHighWarningThreshold | read-only | current | This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warn… |
| 1.3.6.1.4.1.2272.1.71.1.1.41 | ColumnrcPlugOptModRxPowerLowWarningThreshold | read-only | current | This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low wa… |
| 1.3.6.1.4.1.2272.1.71.1.1.42 | ColumnrcPlugOptModAux1 | read-only | current | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.43 | ColumnrcPlugOptModAux1HighAlarmThreshold | read-only | current | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.44 | ColumnrcPlugOptModAux1LowAlarmThreshold | read-only | current | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.45 | ColumnrcPlugOptModAux1HighWarningThreshold | read-only | current | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.46 | ColumnrcPlugOptModAux1LowWarningThreshold | read-only | current | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.47 | ColumnrcPlugOptModAux2 | read-only | current | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.48 | ColumnrcPlugOptModAux2HighAlarmThreshold | read-only | current | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.49 | ColumnrcPlugOptModAux2LowAlarmThreshold | read-only | current | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.50 | ColumnrcPlugOptModAux2HighWarningThreshold | read-only | current | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.51 | ColumnrcPlugOptModAux2LowWarningThreshold | read-only | current | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.52 | ColumnrcPlugOptModTemperatureStatus | read-only | current | Used to indicate the current temperature status |
| 1.3.6.1.4.1.2272.1.71.1.1.53 | ColumnrcPlugOptModVoltageStatus | read-only | current | Used to indicate the current voltage status |
| 1.3.6.1.4.1.2272.1.71.1.1.54 | ColumnrcPlugOptModBiasStatus | read-only | current | Used to indicate the current laser bias status |
| 1.3.6.1.4.1.2272.1.71.1.1.55 | ColumnrcPlugOptModTxPowerStatus | read-only | current | Used to indicate the current transmitter power status |
| 1.3.6.1.4.1.2272.1.71.1.1.56 | ColumnrcPlugOptModRxPowerStatus | read-only | current | Used to indicate the current receiver power status |
| 1.3.6.1.4.1.2272.1.71.1.1.57 | ColumnrcPlugOptModAux1Status | read-only | current | Used to indicate the current Aux1 status |
| 1.3.6.1.4.1.2272.1.71.1.1.58 | ColumnrcPlugOptModAux2Status | read-only | current | Used to indicate the current Aux2 status |
| 1.3.6.1.4.1.2272.1.71.1.1.59 | ColumnrcPlugOptModQSFPTx1Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 1 of QSFP.. It is a positive number expressed in units of 2 microamps a… |
| 1.3.6.1.4.1.2272.1.71.1.1.60 | ColumnrcPlugOptModQSFPTx2Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 2 of QSFP.. It is a positive number expressed in units of 2 microamps a… |
| 1.3.6.1.4.1.2272.1.71.1.1.61 | ColumnrcPlugOptModQSFPTx3Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 3 of QSFP.. It is a positive number expressed in units of 2 microamps a… |
| 1.3.6.1.4.1.2272.1.71.1.1.62 | ColumnrcPlugOptModQSFPTx4Bias | read-only | current | This value represents the internally measured transmitter laser bias current in channel 4 of QSFP.. It is a positive number expressed in units of 2 microamps a… |
| 1.3.6.1.4.1.2272.1.71.1.1.63 | ColumnrcPlugOptModQSFPTx1Power | read-only | current | This value represents the internally measured TX output power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.64 | ColumnrcPlugOptModQSFPTx2Power | read-only | current | This value represents the internally measured TX output power in channel 2 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.65 | ColumnrcPlugOptModQSFPTx3Power | read-only | current | This value represents the internally measured TX output power in channel 3 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.66 | ColumnrcPlugOptModQSFPTx4Power | read-only | current | This value represents the internally measured TX output power in channel 4 of QSFP. It is a positive number expressed in units of micro watts and can range fro… |
| 1.3.6.1.4.1.2272.1.71.1.1.67 | ColumnrcPlugOptModQSFPRx1Power | read-only | current | This value represents the internally measured received power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.68 | ColumnrcPlugOptModQSFPRx2Power | read-only | current | This value represents the internally measured received power in channel 2 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.69 | ColumnrcPlugOptModQSFPRx3Power | read-only | current | This value represents the internally measured received power in channel 3 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.70 | ColumnrcPlugOptModQSFPRx4Power | read-only | current | This value represents the internally measured received power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from… |
| 1.3.6.1.4.1.2272.1.71.1.1.71 | ColumnrcPlugOptModQSFPTx1BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 1 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.72 | ColumnrcPlugOptModQSFPTx2BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 2 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.73 | ColumnrcPlugOptModQSFPTx3BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 3 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.74 | ColumnrcPlugOptModQSFPTx4BiasStatus | read-only | current | Used to indicate the current laser bias status in channel 4 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.75 | ColumnrcPlugOptModQSFPTx1PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 1 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.76 | ColumnrcPlugOptModQSFPTx2PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 2 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.77 | ColumnrcPlugOptModQSFPTx3PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 3 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.78 | ColumnrcPlugOptModQSFPTx4PowerStatus | read-only | current | Used to indicate the current transmitter power status in channel 4 of QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.79 | ColumnrcPlugOptModQSFPRx1PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 1 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.80 | ColumnrcPlugOptModQSFPRx2PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 2 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.81 | ColumnrcPlugOptModQSFPRx3PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 3 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.82 | ColumnrcPlugOptModQSFPRx4PowerStatus | read-only | current | Used to indicate the current receiver power status in channel 4 for QSFP |
| 1.3.6.1.4.1.2272.1.71.1.1.83 | ColumnrcPlugOptModExtremeSku | read-only | current | This is a 32 bytes field to hold the Extreme SKU number. |
| 1.3.6.1.4.1.2272.1.71.1.1.84 | ColumnrcPlugOptModPowerOnCounter | read-only | current | This value represents the power-on counter. Host increments it by 1 every 48 hours. |
| 1.3.6.1.4.1.2272.1.71.1.1.85 | ColumnrcPlugOptModTxDdmInitial | read-only | current | This value represents the Tx dB from low alarm. Host sets it once only, after the first 48 consecutive hours of operation. Update only if Tx_disable is not act… |
| 1.3.6.1.4.1.2272.1.71.1.1.86 | ColumnrcPlugOptModTxDdmLastGasp | read-only | current | This value represents the last gasp of Tx dB from low alarm. Host updates it every 48 hours. Update only if Tx_disable is not active. |
| 1.3.6.1.4.1.2272.1.71.1.1.87 | ColumnrcPlugOptModRxDdmInitial | read-only | current | This value represents the Rx dB from low alarm. Host sets it after the first 48 consecutive hours of operation since PMD power cycle. Update only if Rx_LOS is … |
| 1.3.6.1.4.1.2272.1.71.1.1.88 | ColumnrcPlugOptModRxDdmLastGasp | read-only | current | This value represents the last gasp of Rx dB from low alarm. Host updates it every 48 hours. Update only if Rx_LOS is not asserted. |
| 1.3.6.1.4.1.2272.1.71.1.1.89 | ColumnrcPlugOptModQSFPTx1DdmInitial | read-only | current | This value represents the Tx dB from low alarm on QSPF channel 1. Host sets it once only, after the first 48 consecutive hours of operation. Update only if Tx_… |
| 1.3.6.1.4.1.2272.1.71.1.1.90 | ColumnrcPlugOptModQSFPTx1DdmLastGasp | read-only | current | This value represents the last gasp of Tx dB from low alarm on QSPF channel 1. Host updates it every 48 hours. Update only if Tx_disable is not active. |
| 1.3.6.1.4.1.2272.1.71.1.1.91 | ColumnrcPlugOptModQSFPRx1DdmInitial | read-only | current | This value represents the Rx dB from low alarm on QSPF channel 1. Host sets it after the first 48 consecutive hours of operation since PMD power cycle. Update … |
| 1.3.6.1.4.1.2272.1.71.1.1.92 | ColumnrcPlugOptModQSFPRx1DdmLastGasp | read-only | current | This value represents the last gasp of Rx dB from low alarm on QSPF channel 1. Host updates it every 48 hours. Update only if Rx_LOS is not asserted. |
| 1.3.6.1.4.1.2272.1.71.1.1.93 | ColumnrcPlugOptModQSFPTx2DdmInitial | read-only | current | This value represents the Tx dB from low alarm on QSPF channel 2. Host sets it once only, after the first 48 consecutive hours of operation. Update only if Tx_… |
| 1.3.6.1.4.1.2272.1.71.1.1.94 | ColumnrcPlugOptModQSFPTx2DdmLastGasp | read-only | current | This value represents the last gasp of Tx dB from low alarm on QSPF channel 2. Host updates it every 48 hours. Update only if Tx_disable is not active. |
| 1.3.6.1.4.1.2272.1.71.1.1.95 | ColumnrcPlugOptModQSFPRx2DdmInitial | read-only | current | This value represents the Rx dB from low alarm on QSPF channel 2. Host sets it after the first 48 consecutive hours of operation since PMD power cycle. Update … |
| 1.3.6.1.4.1.2272.1.71.1.1.96 | ColumnrcPlugOptModQSFPRx2DdmLastGasp | read-only | current | This value represents the last gasp of Rx dB from low alarm on QSPF channel 2. Host updates it every 48 hours. Update only if Rx_LOS is not asserted. |
| 1.3.6.1.4.1.2272.1.71.1.1.97 | ColumnrcPlugOptModQSFPTx3DdmInitial | read-only | current | This value represents the Tx dB from low alarm on QSPF channel 3. Host sets it once only, after the first 48 consecutive hours of operation. Update only if Tx_… |
| 1.3.6.1.4.1.2272.1.71.1.1.98 | ColumnrcPlugOptModQSFPTx3DdmLastGasp | read-only | current | This value represents the last gasp of Tx dB from low alarm on QSPF channel 3. Host updates it every 48 hours. Update only if Tx_disable is not active. |
| 1.3.6.1.4.1.2272.1.71.1.1.99 | ColumnrcPlugOptModQSFPRx3DdmInitial | read-only | current | This value represents the Rx dB from low alarm on QSPF channel 3. Host sets it after the first 48 consecutive hours of operation since PMD power cycle. Update … |
| 1.3.6.1.4.1.2272.1.71.1.1.100 | ColumnrcPlugOptModQSFPRx3DdmLastGasp | read-only | current | This value represents the last gasp of Rx dB from low alarm on QSPF channel 3. Host updates it every 48 hours. Update only if Rx_LOS is not asserted. |
| 1.3.6.1.4.1.2272.1.71.1.1.101 | ColumnrcPlugOptModQSFPTx4DdmInitial | read-only | current | This value represents the Tx dB from low alarm on QSPF channel 4. Host sets it once only, after the first 48 consecutive hours of operation. Update only if Tx_… |
| 1.3.6.1.4.1.2272.1.71.1.1.102 | ColumnrcPlugOptModQSFPTx4DdmLastGasp | read-only | current | This value represents the last gasp of Tx dB from low alarm on QSPF channel 4. Host updates it every 48 hours. Update only if Tx_disable is not active. |
| 1.3.6.1.4.1.2272.1.71.1.1.103 | ColumnrcPlugOptModQSFPRx4DdmInitial | read-only | current | This value represents the Rx dB from low alarm on QSPF channel 4. Host sets it after the first 48 consecutive hours of operation since PMD power cycle. Update … |
| 1.3.6.1.4.1.2272.1.71.1.1.104 | ColumnrcPlugOptModQSFPRx4DdmLastGasp | read-only | current | This value represents the last gasp of Rx dB from low alarm on QSPF channel 4. Host updates it every 48 hours. Update only if Rx_LOS is not asserted. |
| 1.3.6.1.4.1.2272.1.71.1.1.105 | ColumnrcPlugOptModSupportExtremeExtraFeatures | read-only | current | This boolean indicates whether or not the device supports the Extreme extra features. |
| 1.3.6.1.4.1.2272.1.71.2 | NodercPlugOptModScalars | |||
| 1.3.6.1.4.1.2272.1.71.2.1 | ScalarrcPlugOptModDdmMonitor | read-write | current | Enable/disable the global polling monitor for DDM |
| 1.3.6.1.4.1.2272.1.71.2.2 | ScalarrcPlugOptModDdmMonitorInterval | read-write | current | Indicate the interval in which the DDM alert registers is polled |
| 1.3.6.1.4.1.2272.1.71.2.3 | ScalarrcPlugOptModDdmTrapSend | read-write | current | Enable/disable the global ddm trap send to SNMP manager |
| 1.3.6.1.4.1.2272.1.71.2.4 | ScalarrcPlugOptModDdmAlarmPortdown | read-write | current | Enable/disable the global portdown option when ddm alarm occurs |
| 1.3.6.1.4.1.2272.1.71.3 | TablercPlugOptModOperTable | not-accessible | current | Gibc QSPF table |
| 1.3.6.1.4.1.2272.1.71.3.1 | RowrcPlugOptModOperEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.71.3.1.1 | ColumnrcPlugOptModOperPortIndex | not-accessible | current | An index value that uniquely identifies a port on a blade or line-card. |
| 1.3.6.1.4.1.2272.1.71.3.1.2 | ColumnrcPlugOptModOperReset | read-write | current | This boolean indicates whether or not reset the QSPF on the port. |
| 1.3.6.1.4.1.2272.1.71.4 | NodercPlugNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.71.4.1 | ScalarrcPluggableModuleDescription | accessible-for-notify | current | Name or description of the Pluggable module. It is used to by the notification object rcnPlugModInsertedInNotRecommendedPortTrap |