RC-VLAN-MIB
220 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.3.0 | IdentityrcVlanMib | Enterprise MIB for the Accelar product family. | ||
| 1.3.6.1.4.1.2272.1.3.1 | ScalarrcVlanNumVlans | read-only | current | The number of VLANs currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.3.2 | TablercVlanTable | not-accessible | current | A list of Virtual LAN entries. The number of entries is given by rcVlanNumVlans. |
| 1.3.6.1.4.1.2272.1.3.2.1 | RowrcVlanEntry | not-accessible | current | Entry containing configuration information for a particular Virtual LAN. The relationship between the various port sets in a VLAN Entry are : o The set of port… |
| 1.3.6.1.4.1.2272.1.3.2.1.1 | ColumnrcVlanId | read-only | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.2.1.2 | ColumnrcVlanName | read-create | current | An administratively-assigned name for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.3 | ColumnrcVlanColor | read-create | current | An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN … |
| 1.3.6.1.4.1.2272.1.3.2.1.4 | ColumnrcVlanHighPriority | read-create | deprecated | A flag to note whether frames in this VLAN should be assigned a high switching priority. |
| 1.3.6.1.4.1.2272.1.3.2.1.5 | ColumnrcVlanRoutingEnable | read-create | deprecated | A flag to note whether IP routing is enabled in this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.6 | ColumnrcVlanIfIndex | read-only | current | When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should b… |
| 1.3.6.1.4.1.2272.1.3.2.1.7 | ColumnrcVlanAction | read-create | current | VLAN related actions. |
| 1.3.6.1.4.1.2272.1.3.2.1.8 | ColumnrcVlanResult | read-only | current | The result from the last VLAN action. |
| 1.3.6.1.4.1.2272.1.3.2.1.9 | ColumnrcVlanStgId | read-create | current | Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should b… |
| 1.3.6.1.4.1.2272.1.3.2.1.10 | ColumnrcVlanType | read-create | current | The type of VLAN, distinguished according to the policy used to define its port membership. |
| 1.3.6.1.4.1.2272.1.3.2.1.11 | ColumnrcVlanPortMembers | read-create | current | The set of ports that are members (static or dynamic) of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.12 | ColumnrcVlanActiveMembers | read-only | current | The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met. |
| 1.3.6.1.4.1.2272.1.3.2.1.13 | ColumnrcVlanStaticMembers | read-create | current | The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out. |
| 1.3.6.1.4.1.2272.1.3.2.1.14 | ColumnrcVlanNotAllowToJoin | read-create | current | The set of ports that are not allowed to become members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.15 | ColumnrcVlanProtocolId | read-create | current | The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value no… |
| 1.3.6.1.4.1.2272.1.3.2.1.16 | ColumnrcVlanSubnetAddr | read-create | current | The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.… |
| 1.3.6.1.4.1.2272.1.3.2.1.17 | ColumnrcVlanSubnetMask | read-create | current | The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0. |
| 1.3.6.1.4.1.2272.1.3.2.1.18 | ColumnrcVlanAgingTime | read-create | current | The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs. |
| 1.3.6.1.4.1.2272.1.3.2.1.19 | ColumnrcVlanMacAddress | read-only | current | The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1). |
| 1.3.6.1.4.1.2272.1.3.2.1.20 | ColumnrcVlanRowStatus | read-create | current | Used to create/delete entries in the rcVlanTable. |
| 1.3.6.1.4.1.2272.1.3.2.1.21 | ColumnrcVlanIgmpSnoopEnable | read-create | deprecated | A flag to note whether IGMP Snooping is enabled on this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.22 | ColumnrcVlanIgmpSnoopReportProxyEnable | read-create | deprecated | A flag to note whether IGMP Report Proxy is enabled on this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.23 | ColumnrcVlanIgmpSnoopRobustness | read-create | deprecated | This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is ro… |
| 1.3.6.1.4.1.2272.1.3.2.1.24 | ColumnrcVlanIgmpSnoopQueryInterval | read-create | deprecated | The interval (in seconds) between IGMP Host-Query packets transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.3.2.1.25 | ColumnrcVlanIgmpSnoopMRouterPorts | read-create | deprecated | The set of ports in this VLAN that provide connectivity to an IP Multicast router. |
| 1.3.6.1.4.1.2272.1.3.2.1.26 | ColumnrcVlanUserDefinedPid | read-create | current | When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier. |
| 1.3.6.1.4.1.2272.1.3.2.1.27 | ColumnrcVlanIgmpSnoopActiveMRouterPorts | read-only | deprecated | Active ports. |
| 1.3.6.1.4.1.2272.1.3.2.1.28 | ColumnrcVlanProtocolIds | read-create | current | Bitfield of protocol ids. |
| 1.3.6.1.4.1.2272.1.3.2.1.29 | ColumnrcVlanIgmpSnoopActiveQuerier | read-only | deprecated | IP address of multicast querier router. |
| 1.3.6.1.4.1.2272.1.3.2.1.30 | ColumnrcVlanIgmpSnoopMRouterExpiration | read-only | deprecated | Multicast querier router aging time out. |
| 1.3.6.1.4.1.2272.1.3.2.1.31 | ColumnrcVlanIgmpSnoopQuerierPort | read-only | deprecated | The port on which the multicast querier router was heard. |
| 1.3.6.1.4.1.2272.1.3.2.1.32 | ColumnrcVlanUserPriority | read-only | current | User priority level. |
| 1.3.6.1.4.1.2272.1.3.2.1.33 | ColumnrcVlanQosLevel | read-create | current | Used to specify the Qos level packets, carried in this VLAN, should be processed with. |
| 1.3.6.1.4.1.2272.1.3.2.1.34 | ColumnrcVlanTosValue | read-create | current | Tos value. |
| 1.3.6.1.4.1.2272.1.3.2.1.35 | ColumnrcVlanEncap | read-create | current | This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null. |
| 1.3.6.1.4.1.2272.1.3.2.1.36 | ColumnrcVlanFirewallVlanType | read-create | current | This is the firewall vlan type for port based vlans. |
| 1.3.6.1.4.1.2272.1.3.2.1.37 | ColumnrcVlanFdbAging | read-create | current | The timeout required to. |
| 1.3.6.1.4.1.2272.1.3.2.1.38 | ColumnrcVlanUpdateDynamicMacQosLevel | read-create | current | It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a subnet-based or protocol-based vlan when vlan qos level… |
| 1.3.6.1.4.1.2272.1.3.2.1.39 | ColumnrcVlanUserDefinedPidList | read-create | current | A list of Protocol Id to usrDefined in a protocol-based VLAN, this field represents the list user defined protocol identifier. |
| 1.3.6.1.4.1.2272.1.3.2.1.40 | ColumnrcVlanIgmpVer1SnoopMRouterPorts | read-create | current | The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP Version 1. |
| 1.3.6.1.4.1.2272.1.3.2.1.41 | ColumnrcVlanIgmpVer2SnoopMRouterPorts | read-create | current | The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP version 2. |
| 1.3.6.1.4.1.2272.1.3.2.1.42 | ColumnrcVlanTlsIpmc | read-create | current | Enable/disable the IP Mcast for this SP IP service Vlan for TLS OE feature |
| 1.3.6.1.4.1.2272.1.3.2.1.43 | ColumnrcVlanFirewallClusterId | read-create | current | Firewall cluster Id |
| 1.3.6.1.4.1.2272.1.3.2.1.44 | ColumnrcVlanOspfPassivePortMember | read-create | current | The set of ports in the vlan that are designated as ospf passive. |
| 1.3.6.1.4.1.2272.1.3.2.1.45 | ColumnrcVlanUnkDstMacDiscard | read-create | current | Enable/disable Unknown Destination Mac Discard on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.46 | ColumnrcVlanNlbMode | read-create | current | Admin NLB mode set on a VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.47 | ColumnrcVlanOperNlbMode | read-only | current | Oper NLB mode of a VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.48 | ColumnrcVlanVrfId | read-create | current | Indicates the Virtual Router to which the VLAN belongs |
| 1.3.6.1.4.1.2272.1.3.2.1.49 | ColumnrcVlanVrfName | read-create | current | The Name of the Virtual Router to which the VLAN belongs |
| 1.3.6.1.4.1.2272.1.3.2.1.50 | ColumnrcVlanMgmtVlan | read-only | current | This displays the management vlan configuration |
| 1.3.6.1.4.1.2272.1.3.2.1.51 | ColumnrcVlanApplyBtagEthertype | read-create | current | Used to apply user configured btag ethertype to the Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.52 | ColumnrcVlanMmrp | read-create | current | This displays the MMRP enable state for the vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.53 | ColumnrcVlanSource | read-only | current | This object indicates how this VLAN was created: static(1) - Indicates the VLAN was manually configured by an operator. dynamicMvmp(2) - Indicates the VLAN was… |
| 1.3.6.1.4.1.2272.1.3.2.1.54 | ColumnrcVlanNodalMepList | read-create | current | List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma… |
| 1.3.6.1.4.1.2272.1.3.2.1.55 | ColumnrcVlanNumOfNodalMep | read-only | current | Number of nodal meps assigned to this vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.56 | ColumnrcVlanNodalMipLevelList | read-create | current | List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an inte… |
| 1.3.6.1.4.1.2272.1.3.2.1.57 | ColumnrcVlanNumOfNodalMipLevel | read-only | current | Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis. |
| 1.3.6.1.4.1.2272.1.3.2.1.58 | ColumnrcVlanDhcpOption82Enabled | read-create | current | This object is used to control whether DHCP option 82 is enabled for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.59 | ColumnrcVlanIpMultinettingEnable | read-write | current | Indicate if the vlan is an Ip Multinetting vlan. If enabled, rcVlanAssociatedIpMultinettingVlan should be set to 0 |
| 1.3.6.1.4.1.2272.1.3.2.1.60 | ColumnrcVlanAssociatedIpMultinettingVlan | read-write | current | Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable attribute is set |
| 1.3.6.1.4.1.2272.1.3.2.1.61 | ColumnrcVlanPlsbIsid | read-write | current | Plsb i-sid number assigned to a C-vlan. Default 0 value indicates that no i-sid has been assinged. |
| 1.3.6.1.4.1.2272.1.3.2.1.62 | ColumnrcVlanVoiceEnabled | read-write | current | This object is used to control whether voice option is enabled for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.63 | ColumnrcVlanRmonEnable | read-write | current | Indicate if the vlan is enabled for Remote Monitoring |
| 1.3.6.1.4.1.2272.1.3.2.1.64 | ColumnrcVlanIpsecEnable | read-write | deprecated | Indicate if the vlan is enabled for IPSEC. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to depre… |
| 1.3.6.1.4.1.2272.1.3.2.1.65 | ColumnrcVlanLPortMembers | read-only | current | The set of logical ports that are members (dynamic) of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.66 | ColumnrcVlanLPortActiveMembers | read-only | current | The set of logical ports that are currently active in this VLAN. Active ports include all dynamic ports where the VLAN policy was met. |
| 1.3.6.1.4.1.2272.1.3.2.1.67 | ColumnrcVlanLPortStaticMembers | read-only | current | The set of logical ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out. |
| 1.3.6.1.4.1.2272.1.3.2.1.68 | ColumnrcVlanLPortNotAllowToJoin | read-only | current | The set of logical ports that are not allowed to become members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.69 | ColumnrcVlanRspanEnabled | read-write | current | This object is used to control whether rspan option is enabled for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.70 | ColumnrcVlanSpbMcast | read-write | current | Enable/disable SPB multicast on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.71 | ColumnrcVlanSecondaryVlanId | read-write | current | A value that uniquely identifies the secondary Virtual LAN associated with the primary private VLAN. This value corresponds to the lower 12 bits in the IEEE 80… |
| 1.3.6.1.4.1.2272.1.3.2.1.72 | ColumnrcVlanSecondaryIsid | read-write | current | The i-sid number assigned to a secondary VLAN if it exists. Default 0 value. |
| 1.3.6.1.4.1.2272.1.3.2.1.73 | ColumnrcVlanPimGatewayEnable | read-write | current | Enable/disable PIM Gateway on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.74 | ColumnrcVlanIpv6FhsSnoopDhcpEnable | read-create | current | Indicate if IPv6 DHCP snooping is enabled on the vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.75 | ColumnrcVlanIpv6FhsNDInspectionEnable | read-create | current | Indicate if ND inspection is enabled on the vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.76 | ColumnrcVlanDvrEnable | read-create | current | Enable/disable DVR on Vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.77 | ColumnrcVlanDvrGwIpv4Addr | read-create | current | Gateway IPv4 address for this DVR enabled node on Vlan. |
| 1.3.6.1.4.1.2272.1.3.2.1.78 | ColumnrcVlanUntaggedPortMembers | read-create | current | The set of untagged ports that are members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.79 | ColumnrcVlanDvrGwIpv4OneIp | read-create | current | Indicates if one IP is to be used for both Gateway IPv4 address and DVR VLAN IP. |
| 1.3.6.1.4.1.2272.1.3.2.1.80 | ColumnrcVlanIsidName | read-only | current | The administratively-assigned name for the I-SID on this VLAN. |
| 1.3.6.1.4.1.2272.1.3.3 | TablercVlanPortTable | not-accessible | current | A table used to maintain VLAN port related information. |
| 1.3.6.1.4.1.2272.1.3.3.1 | RowrcVlanPortEntry | not-accessible | current | Entry containing VLAN information regarding a particular port. |
| 1.3.6.1.4.1.2272.1.3.3.1.1 | ColumnrcVlanPortIndex | read-only | current | An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port. |
| 1.3.6.1.4.1.2272.1.3.3.1.2 | ColumnrcVlanPortNumVlanIds | read-only | current | Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable. |
| 1.3.6.1.4.1.2272.1.3.3.1.3 | ColumnrcVlanPortVlanIds | read-write | current | An array used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the… |
| 1.3.6.1.4.1.2272.1.3.3.1.4 | ColumnrcVlanPortType | read-write | current | The type of port: access(1) or trunk(2). |
| 1.3.6.1.4.1.2272.1.3.3.1.5 | ColumnrcVlanPortDiscardTaggedFrames | read-write | current | A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process.… |
| 1.3.6.1.4.1.2272.1.3.3.1.6 | ColumnrcVlanPortDiscardUntaggedFrames | read-write | current | A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process… |
| 1.3.6.1.4.1.2272.1.3.3.1.7 | ColumnrcVlanPortDefaultVlanId | read-write | current | The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port. |
| 1.3.6.1.4.1.2272.1.3.3.1.8 | ColumnrcVlanPortPerformTagging | read-write | current | Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic. For tagPvidOnly and untagPvidOnly values the port is tagge… |
| 1.3.6.1.4.1.2272.1.3.3.1.9 | ColumnrcVlanPortSVlanPortType | read-write | current | The type of port. |
| 1.3.6.1.4.1.2272.1.3.3.1.10 | ColumnrcVlanPortLoopDetect | read-write | current | Enable/disable loop detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.11 | ColumnrcVlanPortFirstPortInOpid | read-only | current | This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni a… |
| 1.3.6.1.4.1.2272.1.3.3.1.12 | ColumnrcVlanPortLastPortInOpid | read-only | current | This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni a… |
| 1.3.6.1.4.1.2272.1.3.3.1.13 | ColumnrcVlanPortUntagDefaultVlan | read-write | current | enable/disable Egress Tagging on the Default Vlan of the port. |
| 1.3.6.1.4.1.2272.1.3.3.1.14 | ColumnrcVlanPortLoopDetectAction | read-write | current | This value is used to specify the action which needs to be taken once a loop is detected on a specific port. |
| 1.3.6.1.4.1.2272.1.3.3.1.15 | ColumnrcVlanPortArpDetect | read-write | current | Enable/disable Arp detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.16 | ColumnrcVlanPortSpoofDetect | read-write | current | Enable/disable spoof detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.17 | ColumnrcVlanPortRemarking | read-write | current | Enable/disable remarking on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.18 | ColumnrcVlanPortClassificationSubnet | read-write | current | Enable/disable Subnet based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.19 | ColumnrcVlanPortClassificationProtocol | read-write | current | Enable/disable Protocol based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.20 | ColumnrcVlanPortClassificationPrec | read-write | current | Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts sub… |
| 1.3.6.1.4.1.2272.1.3.3.1.21 | ColumnrcVlanPortVlanIdList | read-write | current | This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan I… |
| 1.3.6.1.4.1.2272.1.3.3.1.22 | ColumnrcVlanPortClassificationSourceMac | read-write | current | Enable/disable SourceMac based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.23 | ColumnrcVlanPortPrivateVlanPortType | read-write | current | The type of port associated wiht private VLAN. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, iso… |
| 1.3.6.1.4.1.2272.1.3.3.1.24 | ColumnrcVlanPortUntaggedVlanIds | read-only | current | This object is used to identify which VLANs this port is associated with as untagged. |
| 1.3.6.1.4.1.2272.1.3.3.1.25 | ColumnrcVlanPortTaggedVlanIds | read-only | current | This object is used to identify which VLANs this port is associated with as tagged. |
| 1.3.6.1.4.1.2272.1.3.3.1.26 | ColumnrcVlanPortOrigin | read-only | current | Describes if port vlan configuration is done by ZTF(Auto-Sense), CLI/SNMP or other. |
| 1.3.6.1.4.1.2272.1.3.4 | TablercVlanMacTable | not-accessible | current | A table used to maintain MAC addresses assigned to a particular VLAN by MAC address. |
| 1.3.6.1.4.1.2272.1.3.4.1 | RowrcVlanMacEntry | not-accessible | current | Entry containing VLAN information regarding a particular port. |
| 1.3.6.1.4.1.2272.1.3.4.1.1 | ColumnrcVlanMacVlanId | read-only | current | An unique index used to identify a VLAN (by MAC address) in the system. |
| 1.3.6.1.4.1.2272.1.3.4.1.2 | ColumnrcVlanMacAddr | read-only | current | An unique index used to identify a MAC address assigned to a particular VLAN. |
| 1.3.6.1.4.1.2272.1.3.4.1.3 | ColumnrcVlanMacRowStatus | read-create | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.3.5 | ScalarrcVlanIgmpSnoopNumGroups | read-only | current | The number of entries (rows) in the rcVlanIgmpSnoopTable. |
| 1.3.6.1.4.1.2272.1.3.6 | TablercVlanIgmpSnoopTable | not-accessible | deprecated | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast… |
| 1.3.6.1.4.1.2272.1.3.6.1 | RowrcVlanIgmpSnoopEntry | not-accessible | deprecated | An entry (row) in the rcVlanIgmpSnoopTable. |
| 1.3.6.1.4.1.2272.1.3.6.1.1 | ColumnrcVlanIgmpSnoopVlanId | read-only | deprecated | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.6.1.2 | ColumnrcVlanIgmpSnoopIpAddress | read-only | deprecated | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.6.1.3 | ColumnrcVlanIgmpSnoopIfIndex | read-only | deprecated | The interface for which this entry contains information for this IP multicast group address (i.e., the port the Join message was received). |
| 1.3.6.1.4.1.2272.1.3.6.1.4 | ColumnrcVlanIgmpSnoopMember | read-only | deprecated | The IP Address of the source of the membership report received for this IP Multicast group address on this interface (i.e., the address of the host sending the… |
| 1.3.6.1.4.1.2272.1.3.6.1.5 | ColumnrcVlanIgmpSnoopExpiration | read-only | deprecated | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.2272.1.3.6.1.6 | ColumnrcVlanIgmpSnoopType | read-only | deprecated | The type of entry: dynamic(1) entries are created by snooping IGMP messages, static(2) entries are created via management. |
| 1.3.6.1.4.1.2272.1.3.7 | TablercVlanIgmpSnoopStaticTable | not-accessible | deprecated | The (conceptual) table listing the statically- defined IP multicast groups for which there are members on a particular interface on a particular VLAN. |
| 1.3.6.1.4.1.2272.1.3.7.1 | RowrcVlanIgmpSnoopStaticEntry | not-accessible | deprecated | An entry (row) in the rcVlanIgmpSnoopStaticTable. |
| 1.3.6.1.4.1.2272.1.3.7.1.1 | ColumnrcVlanIgmpSnoopStaticVlanId | read-only | deprecated | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.7.1.2 | ColumnrcVlanIgmpSnoopStaticIpAddress | read-only | deprecated | The IP multicast group address for which this entry contains information. The address must fall within 224.0.1.0 to 239.255.255.255. |
| 1.3.6.1.4.1.2272.1.3.7.1.3 | ColumnrcVlanIgmpSnoopStaticMemberPorts | read-create | deprecated | The set of ports in this VLAN multicast traffic for the rcVlanIgmpSnoopStaticIpAddress is to be forwarded to. |
| 1.3.6.1.4.1.2272.1.3.7.1.4 | ColumnrcVlanIgmpSnoopStaticRowStatus | read-create | deprecated | Used to create/delete entries in the rcVlanIgmpSnoopStaticTable. |
| 1.3.6.1.4.1.2272.1.3.7.1.5 | ColumnrcVlanIgmpSnoopStaticNotAllowedToJoin | read-create | deprecated | Not allowed to join |
| 1.3.6.1.4.1.2272.1.3.8 | TablercVlanIgmpSnoopAccessTable | not-accessible | deprecated | Table used to specify which host(s) can send and/or receive IP Multicast traffic. |
| 1.3.6.1.4.1.2272.1.3.8.1 | RowrcVlanIgmpSnoopAccessEntry | not-accessible | deprecated | An entry (row) in the rcVlanIgmpSnoopAccessTable. |
| 1.3.6.1.4.1.2272.1.3.8.1.1 | ColumnrcVlanIgmpSnoopAccessVlanId | read-only | deprecated | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.2 | ColumnrcVlanIgmpSnoopAccessGrpAddr | read-only | deprecated | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.3 | ColumnrcVlanIgmpSnoopAccessHostAddr | read-only | deprecated | The IP address of a host for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.4 | ColumnrcVlanIgmpSnoopAccessHostMask | read-only | deprecated | The IP netmask of a host for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.8.1.5 | ColumnrcVlanIgmpSnoopAccessMode | read-create | deprecated | Used to specify whether the host identified by rcVlanIgmpSnoopAccessHostAddr should be denied IP multicast transmit, receive, or both. |
| 1.3.6.1.4.1.2272.1.3.8.1.6 | ColumnrcVlanIgmpSnoopAccessRowStatus | read-create | deprecated | Row status |
| 1.3.6.1.4.1.2272.1.3.9 | TablercVlanIgmpSnoopSenderTable | not-accessible | deprecated | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast… |
| 1.3.6.1.4.1.2272.1.3.9.1 | RowrcVlanIgmpSnoopSenderEntry | not-accessible | deprecated | An entry (row) in the rcVlanIgmpSnoopSenderTable. |
| 1.3.6.1.4.1.2272.1.3.9.1.1 | ColumnrcVlanIgmpSnoopSenderVlanId | read-only | deprecated | The VLAN for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.9.1.2 | ColumnrcVlanIgmpSnoopSenderIpAddress | read-only | deprecated | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.3.9.1.3 | ColumnrcVlanIgmpSnoopSenderIfIndex | read-only | deprecated | The interface for which this entry contains information for this IP multicast group address (i.e., the port the multicast traffic was received). |
| 1.3.6.1.4.1.2272.1.3.9.1.4 | ColumnrcVlanIgmpSnoopSenderMember | read-only | deprecated | The IP Address of the host sending the multicast traffic. |
| 1.3.6.1.4.1.2272.1.3.9.1.5 | ColumnrcVlanIgmpSnoopSenderAction | read-write | deprecated | Used to specify an action to perform on this group. |
| 1.3.6.1.4.1.2272.1.3.10 | TablercVlanLoopDetectedTable | not-accessible | current | A list of Vlans the port belongs to and the corresponding loop detected status. |
| 1.3.6.1.4.1.2272.1.3.10.1 | RowrcVlanLoopDetectedEntry | not-accessible | current | Loop-Detected Entry. |
| 1.3.6.1.4.1.2272.1.3.10.1.1 | ColumnrcVlanLoopDetectedPortIndex | read-only | current | Port Number. |
| 1.3.6.1.4.1.2272.1.3.10.1.2 | ColumnrcVlanLoopDetectedVlanId | read-only | current | Gives the VlanId to which the port belongs. |
| 1.3.6.1.4.1.2272.1.3.10.1.3 | ColumnrcVlanLoopDetectedValue | read-only | current | Gives the Loop Detected status of the port in a vlan. |
| 1.3.6.1.4.1.2272.1.3.11 | TablercVlanDsapSsapTable | not-accessible | current | A table used to maintain DSAP/SSAP values assigned to a sna802dot2 or userdefined vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1 | RowrcVlanDsapSsapEntry | not-accessible | current | An entry in the rcVlanDsapSsap table. |
| 1.3.6.1.4.1.2272.1.3.11.1.1 | ColumnrcVlanDsapSsapVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1.2 | ColumnrcVlanDsapSsapPid | not-accessible | current | Values of DSAP/SSAP assigned to a particular vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1.3 | ColumnrcVlanDsapSsapRowStatus | read-create | current | Row Status. |
| 1.3.6.1.4.1.2272.1.3.12 | TablercVlanNewLoopDetectedTable | not-accessible | current | A list of Vlans the port belongs to and the corresponding loop detected status. |
| 1.3.6.1.4.1.2272.1.3.12.1 | RowrcVlanNewLoopDetectedEntry | not-accessible | current | Loop-Detected Entry. |
| 1.3.6.1.4.1.2272.1.3.12.1.1 | ColumnrcVlanNewLoopDetectedPortIndex | not-accessible | current | Port Number. |
| 1.3.6.1.4.1.2272.1.3.12.1.2 | ColumnrcVlanNewLoopDetectedVlanId | not-accessible | current | Gives the VlanId to which the port belongs. |
| 1.3.6.1.4.1.2272.1.3.12.1.3 | ColumnrcVlanNewLoopDetectedMac | not-accessible | current | Mac address |
| 1.3.6.1.4.1.2272.1.3.12.1.4 | ColumnrcVlanNewLoopDetectedAction | read-only | current | This value is used to specify the action which needs to be taken once a loop is detected on a specific port. |
| 1.3.6.1.4.1.2272.1.3.12.1.5 | ColumnrcVlanNewLoopDetectedSmltRemote | read-only | current | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.3.13 | TablercVlanPortCfmMepTable | not-accessible | current | A table used to maintain CFM MEP assigned to the port in a vlan |
| 1.3.6.1.4.1.2272.1.3.13.1 | RowrcVlanPortCfmMepEntry | not-accessible | current | An entry in the rcVlanPortCfmMep table. |
| 1.3.6.1.4.1.2272.1.3.13.1.1 | ColumnrcVlanPortCfmMepVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.13.1.2 | ColumnrcVlanPortCfmMepPort | not-accessible | current | A unique index to identify a port interface in a Vlan. |
| 1.3.6.1.4.1.2272.1.3.13.1.3 | ColumnrcVlanPortCfmMepMepList | read-create | current | List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist o… |
| 1.3.6.1.4.1.2272.1.3.13.1.4 | ColumnrcVlanPortCfmMepNumOfMep | read-only | current | Used to indicate the number of Meps is assigned to this entry |
| 1.3.6.1.4.1.2272.1.3.13.1.5 | ColumnrcVlanPortCfmMepRowStatus | read-create | current | Row Create attibute. For perfomace and efficience, rcVlanPortCfmMepMepList is required for creation. If any Mep is added, entry would be created. If all Mep ar… |
| 1.3.6.1.4.1.2272.1.3.14 | TablercVlanPortCfmMipTable | not-accessible | current | A table used to maintain CFM MIP assigned to the port in a vlan |
| 1.3.6.1.4.1.2272.1.3.14.1 | RowrcVlanPortCfmMipEntry | not-accessible | current | An entry in the rcVlanPortCfmMip table. |
| 1.3.6.1.4.1.2272.1.3.14.1.1 | ColumnrcVlanPortCfmMipVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.14.1.2 | ColumnrcVlanPortCfmMipPort | not-accessible | current | A unique index to identify a port interface in a Vlan. |
| 1.3.6.1.4.1.2272.1.3.14.1.3 | ColumnrcVlanPortCfmMipMipList | read-create | current | List of Mips assigned to this entry. A mip is consist of <md>.<mip_id>. Domain Name and Mip Id is separated by '.' A list of mip is consist of <md1>.<mipid1>,<… |
| 1.3.6.1.4.1.2272.1.3.14.1.4 | ColumnrcVlanPortCfmMipNumOfMip | read-only | current | Used to indicate the number of Mips is assigned to this entry |
| 1.3.6.1.4.1.2272.1.3.14.1.5 | ColumnrcVlanPortCfmMipRowStatus | read-create | current | Row Create attibute. For perfomace and efficience, rcVlanPortCfmMipMipList is required for creation. If any Mip is added, entry would be created. If all Mip ar… |
| 1.3.6.1.4.1.2272.1.3.15 | TablercVlanExtFilterSvcTable | not-accessible | current | Extended filtering services per port per Vlans are defined in this table |
| 1.3.6.1.4.1.2272.1.3.15.1 | RowrcVlanExtFilterSvcEntry | not-accessible | current | Used to indicate the extended filtering services. Extended filtering services are per port per Vlan. |
| 1.3.6.1.4.1.2272.1.3.15.1.1 | ColumnrcVlanExtFilterSvcVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.15.1.2 | ColumnrcVlanExtFilterSvcFwdAllPorts | read-write | current | Contains port list that are in ForwardAll mode. |
| 1.3.6.1.4.1.2272.1.3.15.1.3 | ColumnrcVlanExtFilterSvcFwdUnregPorts | read-write | current | Contains port list that are in Forward Unregistered mode. |
| 1.3.6.1.4.1.2272.1.3.15.1.4 | ColumnrcVlanExtFilterSvcFilterUnregPorts | read-write | current | Contains port list that are in Filter Unregistered mode. |
| 1.3.6.1.4.1.2272.1.3.16 | TablercVlanPortSpoofDetectTable | not-accessible | current | Table containing spoof-detect block entries. |
| 1.3.6.1.4.1.2272.1.3.16.1 | RowrcVlanPortSpoofDetectEntry | not-accessible | current | This entry, which contains port index, VLAN ID, IP address and MAC address, is used to indicate which MAC address is starting IP-Spoof attack and which gateway… |
| 1.3.6.1.4.1.2272.1.3.16.1.1 | ColumnrcVlanPortSpoofDetectIndex | not-accessible | current | The auxiliary variable for identifying instances of the columnar objects in the spoof detect table. |
| 1.3.6.1.4.1.2272.1.3.16.1.2 | ColumnrcVlanPortSpoofDetectSpoofedIpAddressType | read-only | current | IP address type of address under spoof attack. |
| 1.3.6.1.4.1.2272.1.3.16.1.3 | ColumnrcVlanPortSpoofDetectSpoofedIpAddress | read-only | current | IP address that has been detected under spoof attack. |
| 1.3.6.1.4.1.2272.1.3.16.1.4 | ColumnrcVlanPortSpoofDetectSpoofedMacAddress | read-only | current | MAC address that has sent out spoofing ARP. |
| 1.3.6.1.4.1.2272.1.3.16.1.5 | ColumnrcVlanPortSpoofDetectPort | read-only | current | Port index that has enabled spoof-detect. |
| 1.3.6.1.4.1.2272.1.3.16.1.6 | ColumnrcVlanPortSpoofDetectVlanId | read-only | current | VLAN ID that has been detected under spoof attack. |
| 1.3.6.1.4.1.2272.1.3.17 | TablercVlanClearMacRecordTable | not-accessible | current | Table used to clear a Vlan MAC Record. |
| 1.3.6.1.4.1.2272.1.3.17.1 | RowrcVlanClearMacRecordEntry | not-accessible | current | Vlan Clear Mac Record Table Entry |
| 1.3.6.1.4.1.2272.1.3.17.1.1 | ColumnrcVlanClearMacRecordAddr | not-accessible | current | Mac Address that needs to be cleared. |
| 1.3.6.1.4.1.2272.1.3.17.1.2 | ColumnrcVlanClearMacRecordVlanId | read-write | current | Vlan Id where the Mac record has to be cleared. |
| 1.3.6.1.4.1.2272.1.3.17.1.3 | ColumnrcVlanClearMacRecordAllVlanIds | read-write | current | When set to true, this will clear the MAC record on all the Vlan Ids it exists. |
| 1.3.6.1.4.1.2272.1.3.17.1.4 | ColumnrcVlanClearMacRecordForceDelete | read-write | current | By default, when ForceDelete is set to false, MAC record will not be cleared if an ARP record is associated with this Mac Address. If ForceDelete is set to Tru… |
| 1.3.6.1.4.1.2272.1.3.17.1.5 | ColumnrcVlanClearMacRecordLCForceDelete | read-write | current | By default, when LCForceDelete (Line Card Force Delete) is set to false, if the MAC record is not found on the CP, then no message will be sent to the line-car… |
| 1.3.6.1.4.1.2272.1.3.18 | TablercVlanNameTable | not-accessible | current | A table that can be used to map the Virtual LAN Id to IfIndex and Name for display. It is informational only. |
| 1.3.6.1.4.1.2272.1.3.18.1 | RowrcVlanNameEntry | not-accessible | current | Each entry has mapping information for a particular Virtual LAN. This in intended for display purposes only. |
| 1.3.6.1.4.1.2272.1.3.18.1.1 | ColumnrcVlanNameVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.18.1.2 | ColumnrcVlanNameVlanName | read-only | current | The assigned name for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.18.1.3 | ColumnrcVlanNameIfIndex | read-only | current | When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and will be … |
| 1.3.6.1.4.1.2272.1.3.19 | TablercVlanPortSpoofMacTable | not-accessible | current | A table contains a list of Spoof blocked MAC address information. |
| 1.3.6.1.4.1.2272.1.3.19.1 | RowrcVlanPortSpoofMacEntry | not-accessible | current | Entry containing a spoof blocked MAC address |
| 1.3.6.1.4.1.2272.1.3.19.1.1 | ColumnrcVlanPortSpoofMacPortNum | not-accessible | current | Port interface number of the Spoof detect is enabled. Spoof mac is detected |
| 1.3.6.1.4.1.2272.1.3.19.1.2 | ColumnrcVlanPortSpoofMacVlanId | not-accessible | current | A vlan entry which the port intreface belong to. And the spoof MAC is detected |
| 1.3.6.1.4.1.2272.1.3.19.1.3 | ColumnrcVlanPortSpoofMacIpAddress | not-accessible | current | A Local Ip address on this interface |
| 1.3.6.1.4.1.2272.1.3.19.1.4 | ColumnrcVlanPortSpoofMacMacAddress | not-accessible | current | A spoofing Mac address that is detected in this interface |
| 1.3.6.1.4.1.2272.1.3.19.1.5 | ColumnrcVlanPortSpoofMacClearMac | read-write | current | Clear/delete this spoof detect mac entry when it is true. It always return false when query |
| 1.3.6.1.4.1.2272.1.35.1 | NodercSvlanGlobal | |||
| 1.3.6.1.4.1.2272.1.35.1.1 | ScalarrcSvlanActiveLevel | read-write | current | Stacked Vlan active level. |
| 1.3.6.1.4.1.2272.1.35.2 | TablercSvlanTable | not-accessible | current | A list of possible levels and their corresponding ether type. The number of entries is eight. |
| 1.3.6.1.4.1.2272.1.35.2.1 | RowrcSvlanEntry | not-accessible | current | A Stacked Vlan table entry. |
| 1.3.6.1.4.1.2272.1.35.2.1.1 | ColumnrcSvlanId | read-only | current | Row Index. |
| 1.3.6.1.4.1.2272.1.35.2.1.2 | ColumnrcSvlanLevel | read-only | current | A value that identifies the switch level associated with this entry. |
| 1.3.6.1.4.1.2272.1.35.2.1.3 | ColumnrcSvlanEtherType | read-write | current | The ether type value is used for svlan tagging. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RcVlanMask | OCTET STRING (SIZE (0..512)) | current | Each VLAN ID is stored as a bit in a mask. The most-significant (left-most) bit represents Vlan ID 1. |