RC-WLAN-MIB
52 objects
Enterprise MIB for Wireless LAN
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| RAPID-CITY | rcWlan |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.207.0 | IdentityrcWlanMib | Enterprise MIB for Wireless LAN | ||
| 1.3.6.1.4.1.2272.1.207.1 | NodercWlanScalars | |||
| 1.3.6.1.4.1.2272.1.207.1.1 | ScalarrcWlanVlanReserveVlanList | read-write | current | The object is used as bitfield to indicate all the VLANs that are reserved. Each VLAN is stored as a bit. The most-significant (left-most) bit represents Vlan … |
| 1.3.6.1.4.1.2272.1.207.1.2 | ScalarrcWlanVlanReserveNumberVlans | read-only | current | The object contains the number of reserved VLANs. |
| 1.3.6.1.4.1.2272.1.207.1.3 | ScalarrcWlanVlanReserveVlanInUse | read-only | current | The object indicates if a Vlan Id from the reserved pool is in use. |
| 1.3.6.1.4.1.2272.1.207.1.4 | ScalarrcWlanVlanReserveVlanInUseBySmlt | read-only | current | The object indicates if a Vlan Id from the reserved pool is in use by SMLT. |
| 1.3.6.1.4.1.2272.1.207.1.5 | ScalarrcWlanVlanReserveSmltConfigMatch | read-only | current | The object indicates if a Vlan Id from the reserved pool is the same for SMLT peers. |
| 1.3.6.1.4.1.2272.1.207.1.6 | ScalarrcWlanConfigSystemSmltDataIPAddressType | read-write | current | This object indicates the type of internet address in the corresponding instance of rcWlanConfigSystemSmltDataIPAddress. Currently, only the values ipv4(1) and… |
| 1.3.6.1.4.1.2272.1.207.1.7 | ScalarrcWlanConfigSystemSmltDataIPAddress | read-write | current | This object contains the IP address that will be used for Wireless LAN switch SMLT data tunnel. |
| 1.3.6.1.4.1.2272.1.207.1.8 | ScalarrcWlanConfigSmltHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. Do not start forwarding data until local syncronization is done. |
| 1.3.6.1.4.1.2272.1.207.1.9 | ScalarrcWlanConfigSmltEnabled | read-write | current | This is used to enable SMLT wireless feature. A value of true(1) means enabled. |
| 1.3.6.1.4.1.2272.1.207.1.10 | ScalarrcWlanConfigSmltTcpUdpBasePort | read-write | current | TCP/UDP port to be used in SMLT. |
| 1.3.6.1.4.1.2272.1.207.1.11 | ScalarrcWlanConfigRemoteVlanStg | read-write | current | The stg id for the remote vlan in the STP/MSTP mode. In STP mode, the stg range is 1 to 64. IN MSTP mode, the msti range is 0 to 63. Setting to 255 is used to … |
| 1.3.6.1.4.1.2272.1.207.1.12 | ScalarrcWlanConfigManagementAddressType | read-write | current | This object indicates the type of address contained in the object rcWlanConfigManagementAddress. |
| 1.3.6.1.4.1.2272.1.207.1.13 | ScalarrcWlanConfigManagementAddress | read-write | current | This address is used as the management interface of the wireless switch. |
| 1.3.6.1.4.1.2272.1.207.2 | TablercWlanMobSwTunnelTable | not-accessible | current | this table contains entries of the Access and Mobility tunnels that are established at the local switch. |
| 1.3.6.1.4.1.2272.1.207.2.1 | RowrcWlanMobSwTunnelEntry | not-accessible | current | A peer mobility switch or an access point. With one rcWlanMobSwTunnelIntfId there ccould be two endpoints with different rcWlanMobSwTunnelPeerDeviceId in the c… |
| 1.3.6.1.4.1.2272.1.207.2.1.1 | ColumnrcWlanMobSwTunnelIntfId | not-accessible | current | Used to display Logical Port for the tunnel. |
| 1.3.6.1.4.1.2272.1.207.2.1.2 | ColumnrcWlanMobSwTunnelPeerDeviceId | not-accessible | current | The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel. |
| 1.3.6.1.4.1.2272.1.207.2.1.3 | ColumnrcWlanMobSwTunnelPeerAddrType | read-only | current | This object indicates the type of internet address in the corresponding instance of rcWlanMobSwTunnelPeerAddr. Currently, only the values ipv4(1) and ipv6(2) a… |
| 1.3.6.1.4.1.2272.1.207.2.1.4 | ColumnrcWlanMobSwTunnelPeerAddr | read-only | current | The address of the peer mobility switch or access point. The type of address is indicated by the corresponding instance of rcWlanMobSwTunnelPeerAddrType. |
| 1.3.6.1.4.1.2272.1.207.2.1.5 | ColumnrcWlanMobSwTunnelPeerUdpPort | read-only | current | Indicates the UDP port which the peer mobility switch or access point will use for control protocol communication with the local switch. |
| 1.3.6.1.4.1.2272.1.207.2.1.6 | ColumnrcWlanMobSwTunnelStatus | read-only | current | Indicates the status of the mobility tunnel connection to this peer mobility switch, or the access tunnel to this access point. |
| 1.3.6.1.4.1.2272.1.207.2.1.7 | ColumnrcWlanMobSwTunnelType | read-only | current | The tunnel type. |
| 1.3.6.1.4.1.2272.1.207.3 | NodercWlanNotifications | |||
| 1.3.6.1.4.1.2272.1.207.3.1 | ScalarrcWlanNotificationErrorType | accessible-for-notify | current | Indicates the type of the error occurred. |
| 1.3.6.1.4.1.2272.1.207.3.2 | ScalarrcWlanNotificationTrapInfo | accessible-for-notify | current | String that contains error details. |
| 1.3.6.1.4.1.2272.1.207.3.3 | ScalarrcWlanNotificationMobilityTunnelPeerId | accessible-for-notify | current | This object contains the MAC address that uniquely identifies the Tunnel peer id. This value is what is used to identify this switch in peer switches, and is u… |
| 1.3.6.1.4.1.2272.1.207.3.4 | ScalarrcWlanNotificationMobTunnelAddressType | accessible-for-notify | current | This object indicates the type of internet address in the corresponding instance of rcWlanAuxMobTunnelAddress. Currently, only the values ipv4(1) and ipv6(2) a… |
| 1.3.6.1.4.1.2272.1.207.3.5 | ScalarrcWlanNotificationMobTunnelAddress | accessible-for-notify | current | This object contains the tunnel IP address that will be used in errors notification traps. |
| 1.3.6.1.4.1.2272.1.207.3.6 | ScalarrcWlanNotificationMobTunnelMVlanName | accessible-for-notify | current | This object contains mobility VLAN name to be used in errors notification traps. |
| 1.3.6.1.4.1.2272.1.207.4 | TablercWlanTunnelStatTable | not-accessible | current | A table used to store wireless LAN tunnel statistics. |
| 1.3.6.1.4.1.2272.1.207.4.1 | RowrcWlanTunnelStatEntry | not-accessible | current | interface counters |
| 1.3.6.1.4.1.2272.1.207.4.1.1 | ColumnrcWlanTunnelStatInterfaceId | not-accessible | current | Used to display Logical Port for the tunnel. |
| 1.3.6.1.4.1.2272.1.207.4.1.2 | ColumnrcWlanTunnelStatPeerDeviceId | not-accessible | current | The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel. |
| 1.3.6.1.4.1.2272.1.207.4.1.3 | ColumnrcWlanTunnelStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.4 | ColumnrcWlanTunnelStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.5 | ColumnrcWlanTunnelStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.6 | ColumnrcWlanTunnelStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.207.4.1.7 | ColumnrcWlanTunnelStatBridgeOutFrames | read-only | current | The total number of outgoing frames that were bridged. |
| 1.3.6.1.4.1.2272.1.207.4.1.8 | ColumnrcWlanTunnelStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.9 | ColumnrcWlanTunnelStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.10 | ColumnrcWlanTunnelStatRouteInDiscards | read-only | current | The total number of incoming frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.207.4.1.11 | ColumnrcWlanTunnelStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.12 | ColumnrcWlanTunnelStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.207.4.1.13 | ColumnrcWlanTunnelStatKeepaliveInFrames | read-only | current | The total number of incoming keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.14 | ColumnrcWlanTunnelStatKeepaliveOutFrames | read-only | current | The total number of outgoing keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.15 | ColumnrcWlanTunnelStatAllInFrames | read-only | current | The total number of incoming frames that were bridged, routed and incoming keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.16 | ColumnrcWlanTunnelStatAllOutFrames | read-only | current | The total number of outgoing frames that were bridged, routed and outgoing keepalive frames. |
| 1.3.6.1.4.1.2272.1.207.4.1.17 | ColumnrcWlanTunnelStatAllInDiscardFrames | read-only | current | The total number of incoming frames that were discarded. |
| 1.3.6.1.4.1.2272.1.207.4.1.18 | ColumnrcWlanTunnelStatAllOutDiscardFrames | read-only | current | The total number of outgoing frames that were discarded. |
| 1.3.6.1.4.1.2272.1.207.4.1.19 | ColumnrcWlanTunnelStatReset | read-write | current | This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1). |