RUCKUS-DEVICE-MIB
35 objects
Ruckus device management mib.
Imported Objects
| IF-MIB | ifIndex |
| RUCKUS-ROOT-MIB | ruckusCommonDeviceModule |
| RUCKUS-TC-MIB | RuckusCountryCode |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25053.1.1.4.1 | IdentityruckusDeviceMIB | Ruckus device management mib. | ||
| 1.3.6.1.4.1.25053.1.1.4.1.1 | NoderuckusDeviceObjects | |||
| 1.3.6.1.4.1.25053.1.1.4.1.1.1 | NoderuckusDeviceInfo | |||
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.1 | ScalarruckusDeviceName | read-write | current | Specifies name of the device. Show the same value as model name. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.2 | ScalarruckusDeviceReboot | read-write | current | Setting this object to true(1) would cause to reboot the device. Always returns false(2) on read. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.3 | ScalarruckusDeviceRebootWithDefaults | read-write | current | This allows the product to revert to factory defaults. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.4 | ScalarruckusDeviceCountryCode | read-write | current | Specifies the country code. Example ISO country codes: CA,US,HK,IL,CN,JP,TW. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.5 | ScalarruckusDeviceGPS | read-write | current | Specifies GPS coordinates of the device. (e.g. 37.3881,-122.0258) |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.6 | ScalarruckusDeviceNEId | read-write | current | NE Id. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.10 | ScalarruckusDeviceLocation | read-write | current | Location of the device. Show the intstallation position. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.11 | ScalarruckusDeviceMacAddr | read-only | current | MAC Address |
| 1.3.6.1.4.1.25053.1.1.4.1.1.1.15 | ScalarruckusDeviceLedCtrl | read-write | current | Control led on/off |
| 1.3.6.1.4.1.25053.1.1.4.1.1.2 | NoderuckusDeviceTrapInfo | |||
| 1.3.6.1.4.1.25053.1.1.4.1.1.2.1 | ScalarruckusDeviceTrapDestination | read-write | current | Specifies primary trap destination IPv6 or IPv4 address. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.2.2 | ScalarruckusDeviceTrapDestination2 | read-write | current | Specifies secondary trap destination IPv6 or IPv4 address. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.3 | NoderuckusDeviceIPInfo | |||
| 1.3.6.1.4.1.25053.1.1.4.1.1.3.1 | ScalarruckusDevicePrimaryDNS | read-write | current | Specifies primary DNS IP address. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.3.2 | ScalarruckusDeviceSecondaryDNS | read-write | current | Specifies secondary DNS IP address. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.3.3 | ScalarruckusDevicePrimaryDNSIPV6 | read-write | current | Specifies primary DNS IPV6 address. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.3.4 | ScalarruckusDeviceSecondaryDNSIPV6 | read-write | current | Specifies secondary DNS IPV6 address. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4 | NoderuckusDeviceWanInfo | |||
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1 | TableruckusDeviceWanTable | not-accessible | current | Specifies each wan table. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1 | RowruckusDeviceWanEntry | not-accessible | current | Specifies each wan entry. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.1 | ColumnruckusDeviceWanIPAddrMode | read-write | current | Specifies how the wan gets its IP address. none - bridging static - Statically assigned IP address dhcp - Using DHCP protocol pppoe - Using PPPoE protocol when… |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.2 | ColumnruckusDeviceWanIPAddr | read-write | current | This is writable only if the ruckusDeviceWanIPAddrMode is set to static(2). |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.3 | ColumnruckusDeviceWanName | read-only | current | Specifies the name of the wan interface. |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.4 | ColumnruckusDeviceWanNetmask | read-write | current | Specifies the ip address mask if the ruckusDeviceWanIPAddrMode is set to static(2). |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.5 | ColumnruckusDeviceWanGateway | read-write | current | Specifies the gateway ipaddr if the ruckusDeviceWanIPAddrMode is set to static(2). |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.8 | ColumnruckusDeviceWanIPVersion | read-write | current | Specifies the system ip version,ipv4 or ipv6 or dualstack. ipv4 - only support IPV4 ipv6 - only support IPV6 dualstack - support IPV4 and IPV6 |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.10 | ColumnruckusDeviceWanIPV6AddrMode | read-write | current | Specifies how the wan gets its IPV6 address. auto-configuration - auto get ipv6 address by RFC about IPV6 static - Statically assigned IPV6 address when ipv6ad… |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.11 | ColumnruckusDeviceWanIPV6Addr | read-write | current | This is writable only if the ruckusDeviceWanIPAddrMode is set to static(2). |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.12 | ColumnruckusDeviceWanIPV6PrefixLen | read-write | current | Specifies the ip v6 address prefix length if the ruckusDeviceWanIPV6AddrMode is set to static(2). |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.13 | ColumnruckusDeviceWanIPV6Gateway | read-write | current | Specifies the gateway ipv6 address if the ruckusDeviceWanIPV6AddrMode is set to static(2). |
| 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.200 | ColumnruckusDeviceWanIPIndex | read-only | current | Interface index. |
| 1.3.6.1.4.1.25053.1.1.4.1.2 | NoderuckusDeviceEvents |