RUCKUS-SZ-CONFIG-WLAN-MIB
24 objects
Ruckus WLAN mib
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25053.1.4.2.2 | IdentityruckusSZConfigWLANMIB | Ruckus WLAN mib | ||
| 1.3.6.1.4.1.25053.1.4.2.2.1 | NoderuckusSZConfigWLANObjects | |||
| 1.3.6.1.4.1.25053.1.4.2.2.1.1 | NoderuckusSZConfigWLAN | |||
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1 | TableruckusSZConfigWLANTable | not-accessible | current | SZ WLAN table. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1 | RowruckusSZConfigWLANEntry | not-accessible | current | Specifies each SZ WLAN configuration entry. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.1 | ColumnruckusSZConfigWLANID | read-only | current | this Wireless LAN(WLAN) ID |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.2 | ColumnruckusSZConfigWLANSSID | read-only | current | SSID for this Wireless LAN. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.3 | ColumnruckusSZConfigWLANDescription | read-write | current | Description for this Wireless LAN. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.4 | ColumnruckusSZConfigWLANName | read-only | current | Name for this Wireless LAN |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.8 | ColumnruckusSZConfigWLANWLANServiceType | read-only | current | The the Service type for the Wireless LAN. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.10 | ColumnruckusSZConfigWLANAuthentication | read-only | current | Authentication method choosen for this Wireless LAN. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.12 | ColumnruckusSZConfigWLANEncryption | read-write | current | Encryption method choosen for this Wireless LAN. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.15 | ColumnruckusSZConfigWLANWEPKeyIndex | read-write | current | Select the WEP key index for the WEP encryption. for 802.1x wlan(eap), this node should not be set. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.16 | ColumnruckusSZConfigWLANWEPKey | read-write | current | Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455 for 802.1x wlan(eap), this node should not be set. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.20 | ColumnruckusSZConfigWLANWPACipherType | read-write | current | Enter the encryption cipher method for the WPA encryption. For WPA2, aes is only supported. null is only for read |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.21 | ColumnruckusSZConfigWLANWPAKey | read-write | current | Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters shou… |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.23 | ColumnruckusSZConfigWLANSAEPassphrase | read-write | current | Enter the The SAE Passphrase for WPA3 encryption. If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii. for 8… |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.28 | ColumnruckusSZConfigWLANWirelessClientIsolation | read-write | current | set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. for Guest and webauth WLAN type, … |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.30 | ColumnruckusSZConfigWLANZeroITActivation | read-write | current | Enable the Zero IT Activation Service of the Wireless LAN or not. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.32 | ColumnruckusSZConfigWLANServicePriority | read-write | current | Select the QOS service priority for the Wireless LAN. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.36 | ColumnruckusSZConfigWLANAccountingUpdateInterval | read-write | current | Enter interval in minutes to update Accounting Server. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.45 | ColumnruckusSZConfigWLANVlanID | read-write | current | Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.50 | ColumnruckusSZConfigWLANHideSSID | read-write | current | Hide SSID, not to broadcast it SSID. |
| 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.55 | ColumnruckusSZConfigWLANMaxClientsPerAP | read-write | current | Select the Number of client devices the AP can service for the Wireless LAN. |