SCTE-HMS-HE-OPTICAL-AMPLIFIER-MIB
36 objects
The MIB module is for representing optical amplifiers present in the headend (or indoor) and are supported by a SNMP agent.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| SCTE-HMS-HE-OPTICS-MIB | heOpticalAmplifierGroup |
| SCTE-HMS-HEADENDIDENT-MIB | HeLaserType HeMilliAmp HeOnOffControl HeOnOffStatus HeTenthCentigrade HeTenthdB HeTenthdBm |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.1.3.1 | IdentityheOpticalAmplifierMIB | The MIB module is for representing optical amplifiers present in the headend (or indoor) and are supported by a SNMP agent. | ||
| 1.3.6.1.4.1.5591.1.11.1.3.1.1 | NodeheOpAmpMIBObjects | |||
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.1 | TableheOpAmpUnitTable | not-accessible | current | A table containing information about headend (or indoor) fiber optic amplifiers. These amplifiers could be plug-in modules for a chassis, stand-alone pizza-box… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.1.1 | RowheOpAmpUnitEntry | not-accessible | current | Information about each Fiber Optic amplifier in the subsystem. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.1.1.1 | ColumnheOpAmpUnitOutputStatus | read-only | current | The output status of the amplifier. If all the outputs of the amplifier are off then the variable value shall be off(1), else the value shall be on(2). This ob… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.1.1.2 | ColumnheOpAmpUnitOnOffControl | read-write | current | This variable controls the output status of the amplifer. Setting this variable to off(1) will cause all the amplifier outputs to be shut off. Setting this var… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.2 | TableheOpAmpInputTable | not-accessible | current | A table containing information related to input Parameters in headend (or indoor) fiber optic amplifiers. These amplifiers could be plug-in modules for a chass… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.2.1 | RowheOpAmpInputEntry | not-accessible | current | Information about each Fiber Optic amplifier input in the subsystem. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.2.1.1 | ColumnheOpAmpInputIndex | not-accessible | current | An arbitrary value which uniquely identifies the amplifier input. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.2.1.2 | ColumnheOpAmpInputPower | read-only | current | Optical input power. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (H… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3 | TableheOpAmpLaserTable | not-accessible | current | A table containing information about amplifier laser(s). |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1 | RowheOpAmpLaserEntry | not-accessible | current | A list of information about each laser in the particular amplifier. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.1 | ColumnheOpAmpLaserIndex | not-accessible | current | An arbitrary value which uniquely identifies the laser. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.2 | ColumnheOpAmpLaserTemp | read-only | current | Temperature of the amplifier laser. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.3 | ColumnheOpAmpLaserBiasCurrent | read-only | current | Amplifier laser bias current in mA. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.4 | ColumnheOpAmpLaserOutputPower | read-only | current | The laser output power. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.5 | ColumnheOpAmpLaserTECCurrent | read-only | current | Laser Thermo Electric Cooler current. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HM… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.6 | ColumnheOpAmpLaserType | read-only | current | Laser type. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4 | TableheOpAmpOutputTable | not-accessible | current | A table containing information about amplifier's outputs. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1 | RowheOpAmpOutputEntry | not-accessible | current | A list of information about each output in the particular amplifier. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.1 | ColumnheOpAmpOutputIndex | not-accessible | current | An arbitrary value which uniquely identifies the output. |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.2 | ColumnheOpAmpSetOpticalOutputPower | read-write | current | Set Amplifier Optical Output Power. The setting of this value has no effect unless the heOpAmpOutputGainType is set to constantPower(1) |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.3 | ColumnheOpAmpGainPerWavelength | read-write | current | Controls constant gain per wavelength. The setting of this value has no effect unless the heOpAmpOutputGainType is set to constantGain(2) |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.4 | ColumnheOpAmpOutputPower | read-only | current | The output power. This could be the power from a single output or the output power from each of multiple outputs. This object must provide for the alarm manage… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.1.4.1.5 | ColumnheOpAmpOutputGainType | read-write | current | Controls the output gain type, which is either constant power or constant gain. When constantGain is selected, the value of heOpAmpGainPerWavelength is used to… |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2 | NodeheOpAmpMIBConformance | |||
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.1 | NodeheOpAmpMIBCompliances | |||
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.1.1 | ComplianceheOpAmpCompliance | current | The minimum compliance statement for indoor optical amplifiers. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2 | NodeheOpAmpMIBGroups | |||
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.1 | GroupheOpAmpUnitMandatoryGroup | current | The main group defines objects which are common to all indoor optical amplifier modules. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.2 | GroupheOpAmpInputMandatoryGroup | current | The input group defines objects which are common to all indoor optical amplifier modules. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.3 | GroupheOpAmpOutputMandatoryGroup | current | The output group defines objects which are common to all indoor optical amplifier modules. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.4 | GroupheOpAmpUnitTableGroup | current | The unit group defines objects which are defined in the SCTE-HMS-HE-OPTICAL-amplifier-MIB MIB module. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.5 | GroupheOpAmpInputTableGroup | current | The input group defines optical objects which are defined in the SCTE-HMS-HE-OPTICAL-amplifier-MIB MIB module. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.6 | GroupheOpAmpLaserTableGroup | current | The laser group defines laser objects which are defined in the SCTE-HMS-HE-OPTICAL-amplifier-MIB MIB module. | |
| 1.3.6.1.4.1.5591.1.11.1.3.1.2.2.7 | GroupheOpAmpOutputTableGroup | current | The output group defines amplifier output objects which are defined in the SCTE-HMS-HE-OPTICAL-amplifier-MIB MIB module. |