MIB Viewer

SCTE-HMS-HE-OPTICAL-RECEIVER-MIB

22 objects
The MIB module is for representing an optical receiver present in the headend (or indoor) and is supported by a SNMP agent.
OIDNameAccessStatusDescription
1.3.6.1.4.1.5591.1.11.1.2.1IdentityheOpticalReceiverMIBThe MIB module is for representing an optical receiver present in the headend (or indoor) and is supported by a SNMP agent.
1.3.6.1.4.1.5591.1.11.1.2.1.1NodeheOpRxMIBObjects
1.3.6.1.4.1.5591.1.11.1.2.1.1.1TableheOpRxInputTablenot-accessiblecurrentA table containing information about the input (optical) section in optical receivers in a subsystem.
1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1RowheOpRxInputEntrynot-accessiblecurrentA list of information about each optical section in an optical receiver.
1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.1ColumnheOpRxInputIndexnot-accessiblecurrentAn arbitrary value which uniquely identifies the receiver input.
1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.2ColumnheOpRxInputPowerread-onlycurrentReceiver input power. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB (…
1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.3ColumnheOpRxInputWavelengthControlread-writecurrentWavelength feeding the particular input of the receiver. Typical values might be 131000 (1310 nm) and 155000 (1550 nm). This object is used to calibrate the op…
1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.4ColumnheOpRxInputStatusread-onlycurrentThe laser detector status. The value is normal(1) if the optical input is at normal levels. The value is fault(2) if the optical level is not at the normal lev…
1.3.6.1.4.1.5591.1.11.1.2.1.1.2TableheOpRxOutputTablenot-accessiblecurrentA table containing information about the output (RF) section in optical receivers in a subsystem.
1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1RowheOpRxOutputEntrynot-accessiblecurrentA list of information about each RF section in an optical receiver.
1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.1ColumnheOpRxOutputIndexnot-accessiblecurrentAn arbitrary value which uniquely identifies the receiver output.
1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.2ColumnheOpRxOutputControlread-writecurrentSwitches a particular receiver output either off(1) or on(2). A GET request shall return the current control state that is either off(1) or on(2).
1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.3ColumnheOpRxOutputGainTyperead-writecurrentControls the output gain type, which is either constant power or constant gain.
1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.4ColumnheOpRxOutputPowerread-onlycurrentRF output power.
1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.5ColumnheOpRxOutputRFPadLevelread-writecurrentRF Pad Attenuation Level.
1.3.6.1.4.1.5591.1.11.1.2.1.2NodeheOpRxMIBConformance
1.3.6.1.4.1.5591.1.11.1.2.1.2.1NodeheOpRxMIBCompliances
1.3.6.1.4.1.5591.1.11.1.2.1.2.1.1ComplianceheOpRxCompliancecurrentThe minimum compliance statement for indoor optical receivers.
1.3.6.1.4.1.5591.1.11.1.2.1.2.2NodeheOpRxMIBGroups
1.3.6.1.4.1.5591.1.11.1.2.1.2.2.1GroupheOpRxInputMandatoryGroupcurrentThe main group defines objects which are common to all indoor optical receiver modules.
1.3.6.1.4.1.5591.1.11.1.2.1.2.2.2GroupheOpRxInputTableGroupcurrentThis group defines all the objects which are defined in the input section of SCTE-HMS-HE-OPTICAL-RECEIVER-MIB MIB module.
1.3.6.1.4.1.5591.1.11.1.2.1.2.2.3GroupheOpRxOutputTableGroupcurrentThis group defines all the objects which are defined in the output section of SCTE-HMS-HE-OPTICAL-RECEIVER-MIB MIB module.