SCTE-HMS-HE-OPTICAL-TRANSMITTER-MIB
34 objects
The MIB module is for representing optical transmitters present in the headend (or indoor) and are supported by a SNMP agent.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| SCTE-HMS-HE-OPTICS-MIB | heOpticalTransmitterGroup |
| SCTE-HMS-HEADENDIDENT-MIB | HeHundredthNanoMeter HeLaserType HeOnOffControl HeOnOffStatus HeTenthCentigrade HeTenthdB HeTenthdBm HeTenthVolt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.1.1.1 | IdentityheOpticalTransmitterMIB | The MIB module is for representing optical transmitters present in the headend (or indoor) and are supported by a SNMP agent. | ||
| 1.3.6.1.4.1.5591.1.11.1.1.1.1 | NodeheOpTxMIBObjects | |||
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.1 | TableheOpTxUnitTable | not-accessible | current | A table containing information about headend (or indoor) fiber optic transmitters. These transmitters could be plug-in modules for a chassis, stand-alone pizza… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.1.1 | RowheOpTxUnitEntry | not-accessible | current | Information about each Fiber Optic Transmitter in the subsystem. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.1.1.1 | ColumnheOpTxUnitOutputStatus | read-only | current | The output status of the transmitter. If all the outputs of the transmitter are off then the variable value shall be off(1), else the value shall be on(2). |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.1.1.2 | ColumnheOpTxUnitOnOffControl | read-write | current | This variable controls the output status of the transmitter. Setting this variable to off(1) will cause all the transmitters outputs to be shut off. Setting th… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2 | TableheOpTxInputTable | not-accessible | current | A table containing information related to RF Parameters in headend (or indoor) fiber optic transmitters. These transmitters could be plug-in modules for a chas… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1 | RowheOpTxInputEntry | not-accessible | current | Information about each Fiber Optic Transmitter in the subsystem. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1.1 | ColumnheOpTxInputIndex | not-accessible | current | Index number corresponding to the RF Input for the transmitter unit. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1.2 | ColumnheOpTxInputRFPower | read-only | current | RF composite input power in 0.1 dBm. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1.3 | ColumnheOpTxInputModulatorBias | read-only | current | Modulation Bias. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1.4 | ColumnheOpTxInputAGCMode | read-write | current | Switches the transmitter Automatic Gain Control mode of operation either off(1) or on(2). |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1.5 | ColumnheOpTxInputModulationMode | read-write | current | Transmitter modulation mode: cw(1) for Continuous Wave, or modulated(2) for Modulated. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.2.1.6 | ColumnheOpTxInputRFPadLevel | read-write | current | RF Pad Attenuation Level. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3 | TableheOpTxLaserTable | not-accessible | current | A table containing information about transmitter laser(s). |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1 | RowheOpTxLaserEntry | not-accessible | current | A list of information about each laser in the particular transmitter. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.1 | ColumnheOpTxLaserIndex | not-accessible | current | An arbitrary value which uniquely identifies the laser. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.2 | ColumnheOpTxLaserTemp | read-only | current | Temperature of the Transmitter Laser. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HM… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.3 | ColumnheOpTxLaserBiasCurrent | read-only | current | Transmitter laser bias current. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROP… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.4 | ColumnheOpTxLaserOutputPower | read-only | current | The laser output power. This object must provide for the alarm management capabilities with a corresponding entry in the propertyTable of SCTE-HMS-PROPERTY-MIB… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.5 | ColumnheOpTxLaserTECCurrent | read-only | current | Laser Thermo Electric Cooler current. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.6 | ColumnheOpTxLaserType | read-only | current | Laser type. |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.7 | ColumnheOpTxLaserWavelength | read-only | current | The laser wavelength. Typical value might be 155056 (1550.56 nm). |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.8 | ColumnheOpTxLaserOutputStatus | read-only | current | The laser output status. The value is on(2), if the Laser output is operating in normal condition The value is off(1), if the laser is either forced to turn of… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.1.3.1.9 | ColumnheOpTxLaserOnOffControl | read-write | current | This variable controls the output status of the laser. Setting this variable to off(1) will cause the laser output to be shut off. Setting this variable to on(… |
| 1.3.6.1.4.1.5591.1.11.1.1.1.2 | NodeheOpTxMIBConformance | |||
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.1 | NodeheOpTxMIBCompliances | |||
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.1.1 | ComplianceheOpTxCompliance | current | The minimum compliance statement for indoor optical transmitters. | |
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.2 | NodeheOpTxMIBGroups | |||
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.2.1 | GroupheOpTxUnitMandatoryGroup | current | The main group defines objects which are common to all indoor optical transmitter modules. | |
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.2.2 | GroupheOpTxLaserMandatoryGroup | current | The laser group defines laser objects which are common to all indoor optical transmitter modules. | |
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.2.3 | GroupheOpTxUnitTableGroup | current | The unit group defines objects which are defined in the SCTE-HMS-HE-OPTICAL-TRANSMITTER-MIB MIB module. | |
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.2.4 | GroupheOpTxInputTableGroup | current | The input group defines RF objects which are defined in the SCTE-HMS-HE-OPTICAL-TRANSMITTER-MIB MIB module. | |
| 1.3.6.1.4.1.5591.1.11.1.1.1.2.2.5 | GroupheOpTxLaserTableGroup | current | The laser group defines laser objects which are defined in the SCTE-HMS-HE-OPTICAL-TRANSMITTER-MIB MIB module. |