SCTE-HMS-HMTS-MIB
142 objects
This MIB contains information that must be supported by all Hybrid Management Termination Systems (HMTS). An HMTS is defined as a gateway between a IP (Internet Protocol) network and the HMS Physical and MAC layers defined by SCTE 25-1 (Formerly HMS005) and SCTE 25-2 (Formerly HMS004). The HMTS shall support, but is not limited to the following MIBs: RFC-1213 - all current groups and objects SNMPv2-MIB - all current groups and objects SCTE 38-1 (formerly HMS026) - Properties MIB SCTE 84-1 (formerly HMS111) - HMS HE Common
Imported Objects
| ENTITY-MIB | entityGeneralGroup entityNotificationsGroup entityPhysical2Group entityPhysicalGroup |
| SCTE-HMS-HE-COMMON-MIB | heCommonLogGroup heCommonNotificationsGroup |
| SCTE-HMS-HEADENDIDENT-MIB | heHMTS |
| SCTE-HMS-PROPERTY-MIB | analogAlarmsGroup currentAlarmsGroup discreteAlarmsGroup |
| SNMP-TARGET-MIB | snmpTargetBasicGroup |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-MIB | systemGroup |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.3.2 | IdentityheHMTSMIB | This MIB contains information that must be supported by all Hybrid Management Termination Systems (HMTS). An HMTS is defined as a gateway between a IP (Interne… | ||
| 1.3.6.1.4.1.5591.1.11.3.2.1 | NodeheHMTSObjects | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.0 | NodehmtsNotifications | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.0.1 | NotificationhmtsRegistrationFailedEvent | current | The SNMP notification that is generated when registration of a device failed. There is only one mandatory varbind: hmtsDevComStat, e.g. (OID hmtsDevComStat.16.… | |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1 | NodehmtsInfoGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.1 | ScalarhmtsAdminState | read-write | current | This controls whether the HMTS monitoring service is active active - The HMTS is actively looking for traps and non-responding devices on the serial links. Ful… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.2 | ScalarhmtsOperState | read-only | current | This reports the overall status of the termination system. Vendors must use caution and prevent repeating alarms when trying to automatically recover a failure… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.3 | ScalarhmtsProxyType | read-write | current | This value controls the type of proxy supported by the HMTS, Community, IP, or MIB based. If the termination system does not support setting a specific value t… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.4 | ScalarhmtsFreqSwitchMethod | read-write | current | This controls whether the HMTS automatically changes the Forward ports frequency (hmtsFwdHmtsFrequency) when hmtsFwdXpndrFrequency is set. automatic - The HMTS… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.5 | ScalarhmtsModel | read-only | current | Vendor-specific HMTS model identification string, in human-readable format. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.6 | ScalarhmtsSerialNumber | read-only | current | Serial number of the device, in human-readable format. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.7 | ScalarhmtsSoftwareVersion | read-only | current | Version of the running HMTS software. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.8 | ScalarhmtsTimeServerAddress | read-write | current | If not set to 0.0.0.0, IP address of the time server the HMTS should synchronize its internal clock with. If supported, the vendor must specify the protocol us… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.1.9 | ScalarhmtsTimeServerSyncInterval | read-write | current | Specifies the time between successive clock synchronization attempts. This object is non-volatile. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2 | NodehmtsManagementGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1 | NodehmtsMacPduGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.1 | ScalarhmtsMacPduTimeout | read-write | current | This is the timeout of all MAC PDUs except the TALK PDU. This object is non-volatile. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.2 | ScalarhmtsTalkPduTimeout | read-write | current | This is the timeout of the TALK PDU. This object is non-volatile. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.3 | ScalarhmtsMacBroadcastDelay | read-write | current | This is the delay after sending a broadcast MAC PDU. This object is non-volatile. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.4 | ScalarhmtsAlarmDiscoveryMode | read-write | current | This is the mode of operation for discovering alarms: Polling - HMTS uses polling to determine if the device has an alarm. Contention - HMTS uses broadcast con… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.5 | ScalarhmtsChnldescPduInt | read-write | current | This is the delay between the broadcasting of the CHNLDESC PDUs. This should continue even if the hmtsAdminState is inactive. If either the hmtsFwdXpndrFrequen… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.6 | ScalarhmtsTimePduInt | read-write | current | This is the delay between the broadcasting of the TIME PDU. The time within the HMTS must first be synchronized before the broadcasting of this PDU. This objec… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.1.7 | ScalarhmtsDeviceAccessMode | read-write | current | This object reports and controls how the HMTS will respond to requests to devices during a contention period. immediate - means the HMTS will forward the reque… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.2 | NodehmtsRegistrationGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.2.1 | ScalarhmtsRegInterval | read-write | current | This is the delay between the beginnings of each registration period. DEFAULT: vendor specific. This object is non-volatile. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.2.2 | ScalarhmtsRegMinDuration | read-write | current | This is the minimum time for the registration duration period. This is the minimum amount of time the registration window will be open. Attempt to set minimum … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.2.3 | ScalarhmtsRegMaxDuration | read-write | current | This is the maximum time for the registration duration period. This is provided to allow a dynamic duration when a large number of TALKRQST PDUs are received d… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.2.4 | ScalarhmtsRegContinuity | read-write | current | This indicates the manner that the HMTS uses to handle processing of the TALKRQST PDU for auto discovery. immediate - means that the HMTS immediately terminate… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3 | NodehmtsSnmpTrapControlGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1 | TablehmtsTrapControlTable | not-accessible | current | This table contains entries to control multicast groups for alarm collection. This table allows for multiple groups of alarms to be collected. It is expected t… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1 | RowhmtsTrapControlEntry | not-accessible | current | A list of information about the Trap Control Entry. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.1 | ColumnhmtsTControlId | not-accessible | current | This value uniquely identifies this entry. DEFAULT: vendor specific. This object is non-volatile. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.2 | ColumnhmtsTControlInterval | read-create | current | This is the time between the beginnings of two consecutive alarm discovery periods. If the record is chained this is the interval between start of this entry a… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.3 | ColumnhmtsTControlChainId | read-create | current | This identifies which Trap control records are to be run consecutively. The value of zero indices that the entry is independent from all other entries in this … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.4 | ColumnhmtsTControlMinDuration | read-create | current | This is the minimum time for the alarm/trap discovery duration period for this entry. Attempt to set minimum duration greater than the maximum duration will re… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.5 | ColumnhmtsTControlMaxDuration | read-create | current | This is the maximum time for the alarm//trap discovery duration period for this entry. This is provided to allow a varying window size when a large number of T… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.6 | ColumnhmtsTControlContinuity | read-create | current | This indicates the manner that the HMTS uses to handle processing of the TALKRQST PDU for alarm discovery. immediate - means that the HMTS immediately terminat… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.7 | ColumnhmtsTControlMulticastAddr | read-create | current | This multicast address is used by the HMTS to address transponders that are to enable their contention when the row containing this object is processed. This a… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.8 | ColumnhmtsTControlRowStatus | read-create | current | This is used to add and delete rows from this table dynamically. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.4 | NodehmtsSnmpProtocolGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.4.1 | ScalarhmtsSnmpTimeout | read-write | current | This is how long the HMTS will wait before timing out a SNMP request. The HMTS shall not retry SNMP requests. This is the role of the external management syste… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.4.2 | ScalarhmtsSnmpBroadcastDelay | read-write | current | This is the amount of time that the HMTS will wait after multicasting or broadcasting an SNMP request. This applies both to mulicast/broadcast SNMP requests ge… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5 | TablehmtsFwdPortTable | not-accessible | current | The forward port table contains information about the forward transmitter ports of the HMTS. The ports may be of several varieties. The majority of the control… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1 | RowhmtsFwdPortEntry | not-accessible | current | A list of information about each forward path port |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.1 | ColumnhmtsFwdPortId | not-accessible | current | This is a unique string identifying the forward port. This value is vendor specific and should physically identify the port. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.2 | ColumnhmtsFwdPortDescr | read-only | current | This is a string of text describing the function of the port and physical location. Such as 'HMS RF transmitter - Slot 1'. This value is vendor specific. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.3 | ColumnhmtsFwdPortType | read-only | current | Serial communication type: rf - This HMTS port uses an RF modem for forward communication. rs485 - This HMTS port uses an RS-485 for forward communication. rs2… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.4 | ColumnhmtsFwdPortAdminState | read-write | current | This allows the operator to disable/enable the processing of data sent on this port. When disabled no forward path messages shall be sent out this port. If the… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.5 | ColumnhmtsFwdPortOperState | read-only | current | This reports the operational status of the port. This object has a threshold property in the discretePropertyTable as defined in SCTE 38-1 (formerly HMS026) |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.6 | ColumnhmtsFwdHmtsFrequency | read-write | current | This is the frequency at which an HMTS transmits its FSK signal on the HFC network, and only applies to RF ports. Other port types should return noSuchName upo… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.7 | ColumnhmtsFwdXpndrFrequency | read-write | current | This is the frequency being sent in the payload of the CHNLDESC PDU. This variable only applies to RF ports, other port types should return noSuchName. When th… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.8 | ColumnhmtsFwdProvPwrLvl | read-write | current | This is the power level of the forward port transmitter modem. This value only applies to the RF port type; all other port types should return noSuchName. Any … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.9 | ColumnhmtsFwdMaxPwrLvl | read-write | current | This is the maximum power level of the forward port transmitter modem. This value only applies to the RF port type; all other port types should return noSuchNa… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.10 | ColumnhmtsFwdPollTime | read-write | current | The HMTS is required to poll the devices on the network. This is the maximum amount of time the HMTS will allow to pass before automatically attempting communi… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6 | TablehmtsRevPortTable | not-accessible | current | The Reverse Port table contains information about the receiver ports of the HMTS. The reverse path may be Serial RF, RS-485 or another serial interface. The se… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1 | RowhmtsRevPortEntry | not-accessible | current | A list of information about each reverse path port. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.1 | ColumnhmtsRevPortId | not-accessible | current | This is a unique string identifying the reverse path port. This value is vendor specific and should physically identify the port. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.2 | ColumnhmtsRevFwdPortId | read-write | current | This is the unique identifier of the forward port table. This ties this reverse port to the commanding forward port. This shall be a valid index in the hmtsFwd… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.3 | ColumnhmtsRevPortDescr | read-only | current | This is a string of text describing the function of the port and physical location. Such as 'HMS RF Receiver - Slot 3'. This value is vendor specific. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.4 | ColumnhmtsRevPortType | read-only | current | Serial communication type: rf - This HMTS port uses an RF modem for reverse communication. rs485 - This HMTS port uses an RS-485 for reverse communication. rs2… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.5 | ColumnhmtsRevPortAdminState | read-write | current | This allows the operator to disable/enable the processing of data received on this port. When disabled no reverse path messages shall be received from this por… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.6 | ColumnhmtsRevPortOperState | read-only | current | This reports the operational status of the port. This object has a threshold property in the discreteProperty as describe in SCTE 38-1 (formerly HMS026). |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.7 | ColumnhmtsRevFrequency | read-write | current | This is the return path frequency of both the HMTS' reverse path modem and the network element's reverse path transmitter. This value only applies to the RF po… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.8 | ColumnhmtsRevMuteLvl | read-write | current | This level controls the automatic receiver Mute. Power below this level will not be converted into a digital data. This field only applies to the RF port type;… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.9 | ColumnhmtsRevMulticastAddr | read-write | current | This is the Multicast address associated with all devices on this receiver. When a device first registers with HMTS, this value is set as one of the devices mu… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.10 | ColumnhmtsRevReturnLvl | read-only | current | This is the return level as recorded on the last response received on this receiver. This value only applies to the RF port types; all other port types should … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.11 | ColumnhmtsRevCRCErrors | read-write | current | This object maintains the number of packets received that have a bit error and do not pass CRC check. This count is maintained until the HMTS is reset or this … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.12 | ColumnhmtsRevFrameErrors | read-write | current | This object maintains the number of packets received that have a framing error. This count is maintained until the HMTS is reset or this count is reset. Writin… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.13 | ColumnhmtsRevBackOffPeriod | read-write | current | This is the backoff period as described in the commonBackoffPeriod object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by the HMT… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.14 | ColumnhmtsRevACKTimeout | read-write | current | This is the acknowledge timeout as described in the commonACKTimeoutWindow object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.15 | ColumnhmtsRevMaxMACRetries | read-write | current | This is the maximum retries as described in the commonMaximumMACLayerRetries object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.16 | ColumnhmtsRevBackOffMinExp | read-write | current | This is the minimum exponent as described in the commonBackoffMinimumExponent object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.17 | ColumnhmtsRevBackOffMaxExp | read-write | current | This is the maximum exponent as described in the commonBackoffMaximumExponent object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3 | NodehmtsDeviceGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.1 | ScalarhmtsDev | read-only | current | This is the number of devices listed in the hmtsDevTable. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.2 | ScalarhmtsDevInErr | read-only | current | This is the number of devices that are not registered or have a communication fault. That is the number of devices listed in the hmtsComFaultTable. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.3 | ScalarhmtsDefaultCommString | read-write | current | In case hmtsCommManagementMethod has been set to manual, and only in this case, then hmtsDefaultCommString is the default community string to be assigned to hm… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.4 | ScalarhmtsComStatAlarm | not-accessible | current | This object is a global reference object for all hmtsDevComStat objects Properties. It maintains a common property entry for all hmtsDevComStat object. Changin… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.5 | ScalarhmtsContNRespCount | not-accessible | current | This object is a global reference object for all hmtsDevContNRespCount objects properties. It maintains a common property entry for all hmtsDevContNRespCount o… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6 | TablehmtsDevTable | not-accessible | current | The Device Table is the repository of all information known about each transponder. The termination system keeps track of this information base on MAC Address.… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1 | RowhmtsDevEntry | not-accessible | current | A list of information about each device. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.1 | ColumnhmtsDevPhysAddr | not-accessible | current | This is the physical MAC address of the network element that this device entry pertains. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.2 | ColumnhmtsDevIPAddr | read-create | current | This is the device IP address assigned of the network element that this device entry pertains. The default IP address is 0.0.0.0. When one tries to set an IP a… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.3 | ColumnhmtsDevCommString | read-create | current | This is the community string assigned to the network element that this device entry pertains. If hmtsCommManagementMethod is automatic then how the community s… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.4 | ColumnhmtsDevFwdPortId | read-only | current | This is the Id of the HMTS' forward path port or transmitter used to communicate with the corresponding network element. This uniquely identifies the table ent… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.5 | ColumnhmtsDevRevPortId | read-create | current | This is the id of the HMTS' reverse path port or receiver used to communicate with the corresponding network element. This uniquely identifies the table entry … |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.6 | ColumnhmtsDevComStat | read-only | current | This reports the current device communication status with the corresponding network element. Entries with the value of other than noError(1) shall be list in t… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.7 | ColumnhmtsDevReturnLvl | read-only | current | This is the return level as recorded on the last response from this device. This value only applies to transponders that are accessed via the serial RF link, n… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.8 | ColumnhmtsDevLastStateChg | read-only | current | This is the time of the last state change to this hmtsDevComStat object's value. All values are unsigned 32 bit integers. Time since the Epoch (00:00:00, Janua… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.9 | ColumnhmtsDevLastRespTime | read-only | current | This is the time of the last response received from this device. All values are unsigned 32 bit integers. Time since the Epoch (00:00:00, January 1, 1970), mea… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.10 | ColumnhmtsDevRqstCount | read-create | current | This is the total number of unicast requests made to this device. This unsigned value is reset to zero by setting its value to zero. Setting this value to a no… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.11 | ColumnhmtsDevRespTimeoutCount | read-create | current | This is the total number of unicast requests that have timed out. This is an unsigned value that is reset to zero by setting its value to zero. Setting this va… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.12 | ColumnhmtsDevContNRespCount | read-only | current | This is the contiguous number of unicast requests that have timed out for this device. Upon the receipt of a valid response this value is reset to zero. This o… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.13 | ColumnhmtsDevRegStatus | read-only | current | This identifies the status of the device: Registered - the device has successfully registered. Registering - the device is in the process of registering. Not R… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.14 | ColumnhmtsDevRegTime | read-only | current | This is the time the device last completed registration. All values are unsigned 32 bit integers. Time since the Epoch (00:00:00 UTC, January 1, 1970), measure… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.15 | ColumnhmtsDevRowStatus | read-create | current | This is used to add and delete rows from this table dynamically. The RowStatus textual convention has been defined in the SNMPv2-TC MIB (RFC 2579). According t… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.7 | TablehmtsComFaultTable | not-accessible | current | This table identifies the MAC addresses of devices that have a problem in registering or communicating with the HMTS. Only devices with hmtsDevComStat value ot… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.7.1 | RowhmtsComFaultEntry | not-accessible | current | A list of devices that are either not communicating or are not registered with the HMTS. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.7.1.1 | ColumnhmtsComStatPhysAddr | not-accessible | current | This is the physical MAC address of the network element that this entry pertains. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.7.1.2 | ColumnhmtsComStat | read-only | current | This is a specific communication Status indicating the reason of this records entry exists. This is the value of hmtsDevComStat in the hmtsDevTable |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.8 | TablehmtsMulticastAddrTable | not-accessible | current | The multicast address table lists the known multicast/broadcast MAC addresses and provides a translation to either an IP address or a community string. The ent… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1 | RowhmtsMulticastAddrEntry | not-accessible | current | A list of information about each known multicast address. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.1 | ColumnhmtsMulticastPhysAddr | not-accessible | current | This is a known multicast or broadcast MAC address. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.2 | ColumnhmtsMulticastIPAddr | read-create | current | This is the assigned IP address associated to this Multicast or broadcast MAC address. This is Mandatory for HMTS' that support IP based proxies. This IP addre… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.3 | ColumnhmtsMulticastCommString | read-create | current | This is the community string associated to this Multicast or broadcast MAC address. This is current for HMTS' that support community string based proxies. This… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.4 | ColumnhmtsMulticastRowStatus | read-create | current | This is used to add and delete rows from this table dynamically. IP address and/or Community Strings should be distinct from other entries in this table and in… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4 | NodehmtsIPGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.1 | ScalarhmtsIPManagementMethod | read-write | current | Defines how IP addresses are handed out to transponders. client - HMTS provides a gateway-proxy for serial devices to either an external or an internal DHCP se… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.2 | TablehmtsIPDevTable | not-accessible | current | The IP address is the index to this view of the hmtsDevTable. Only the devices that have a device state of registered are listed in this view. This table is cu… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.2.1 | RowhmtsIPDevEntry | not-accessible | current | A list of information about each device. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.2.1.1 | ColumnhmtsIPDevAddr | not-accessible | current | This is the device IP address assigned of the network element that this device entry pertains. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.2.1.2 | ColumnhmtsIPPhysAddr | read-only | current | This is the physical MAC address of the network element that this device entry pertains. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.3 | TablehmtsNetAddrTable | not-accessible | current | This table provides a list of networks from which the HMTS may select an IP address to automatically assign to a device. This table shall also be used to verif… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1 | RowhmtsNetAddrEntry | not-accessible | current | A list of information about each network that this HMTS participates in for the access of the network elements that it acts as a gateway. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.1 | ColumnhmtsNetStartAddr | not-accessible | current | This is the first usable network IP address in the range of addresses that this entry describes. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.2 | ColumnhmtsNetEndAddr | read-create | current | This is the last usable network IP address in the range of addresses that this entry describes. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.3 | ColumnhmtsNetMask | read-create | current | This is the network mask for the addresses that this entry describes. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.4 | ColumnhmtsNetRowStatus | read-create | current | This is used to add and delete rows from this table dynamically. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.5 | NodehmtsCommGroup | |||
| 1.3.6.1.4.1.5591.1.11.3.2.1.5.1 | ScalarhmtsCommManagementMethod | read-write | current | Defines how community strings are assigned to transponders. automatic - HMTS automatically assigns each device a its community string. The user may not be able… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.5.2 | TablehmtsCommDevTable | not-accessible | current | The Community String is the index to this view of the hmtsDevTable. Only the devices that have successfully registered at least once are listed in this view. T… |
| 1.3.6.1.4.1.5591.1.11.3.2.1.5.2.1 | RowhmtsCommDevEntry | not-accessible | current | A list of information about each device. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.5.2.1.1 | ColumnhmtsCommString | not-accessible | current | This is the community string assigned of the network element that this device entry pertains. |
| 1.3.6.1.4.1.5591.1.11.3.2.1.5.2.1.2 | ColumnhmtsCommPhysAddr | read-only | current | This is the physical MAC address of the network element that this device entry pertains. |
| 1.3.6.1.4.1.5591.1.11.3.2.2 | NodeheHMTSConformance | |||
| 1.3.6.1.4.1.5591.1.11.3.2.2.1 | NodehmtsCompliances | |||
| 1.3.6.1.4.1.5591.1.11.3.2.2.1.1 | ComplianceheHMTSCompliance | not-accessible | current | The compliance statement for the HMTS agents that support this MIB. |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2 | NodehmtsGroups | |||
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.1 | GrouphmtsReqManagementGroup | current | The collection of management objects which are required by all HMTS managers. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.2 | GrouphmtsReqDeviceGroup | current | This group defines the Device entry item required by all termination systems. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.3 | GrouphmtsIPDeviceGroup | current | This list the items required for an IP based HMTS. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.4 | GrouphmtsCommDeviceGroup | current | This lists the items required for community string based HMTS. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.5 | GrouphmtsInformationGroup | current | The collection of info objects which are required by all HMTS entities. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.6 | GrouphmtsMacProtocolInformationGroup | current | The collection of MAC protocol info objects which are required by all HMTS entities. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.7 | GrouphmtsSnmpProtocolInformationGroup | current | The collection of SNMP protocol info objects which are required by all HMTS entities. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.8 | GrouphmtsExtendedRegistrationGroup | current | The collection of registration control objects which are optional. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.9 | GrouphmtsTrapControlGroup | current | The collection of objects which are required if the HMTS supports contention for the collection of SNMP traps. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.10 | GrouphmtsExtendedTrapControlGroup | current | The collection of trap control objects which are optional. | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.11 | GrouphmtsExtendedFwdPortGroup | current | The collection of hmtsFwdPortTable objects which are optional | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.12 | GrouphmtsExtendedRevPortGroup | current | The collection of hmtsRevPortTable objects which are optional | |
| 1.3.6.1.4.1.5591.1.11.3.2.2.2.13 | GrouphmtsEventGroup | current | Traps that can be generated by the HMTS. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HmtsComStatCodes | INTEGER { noError(1), noRevPortId(2), notActive(3), notRegis(4), pendRegis(5), registering(6), transDisabled(7), rcvrDisabled(8), rtrnLvl(9), notResp(10), invMac(11), fwdFreqMismatch(12), invIP(20), dupIP(21), invComm(30), dupComm(31), other(32) } | current | This enumerates the communication status condition codes. These codes indicate the state of the communication with a network elements transponder (device). The conditions attempt to indicate where the problem with commu… |