SCTE-HMS-MPEG-MIB
175 objects
This MIB module is for representing MPEG equipment present in the headend and is supported by a SNMP agent. It defines both the MPEG input and output MIB objects for managing MPEG input and output transport streams, programs and elementary streams. It provides both input and output related statistics, as well as program mapping and video session information. All the tables, except mpegProgramMappingTable and mpegVideoSessionTable, capture and store the information related to active transport streams only. Optional MIB objects will have default values defined in this MIB file.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SCTE-HMS-HEADENDIDENT-TC-MIB | HePIDValue ProgDataType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType DateAndTime RowPointer TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.5.4.1 | IdentityheMpegCommonMIB | to | This MIB module is for representing MPEG equipment present in the headend and is supported by a SNMP agent. It defines both the MPEG input and output MIB objec… | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1 | IdentitympegMIBObjects | current | This branch specifies the MPEG Common MIB objects that can be common to any device using MPEG. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1 | IdentitympegDigitalInputs | current | This branch specifies the attributes of the incoming streams to the MPEG device. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.1 | ScalarmpegLossOfSignalTimeout | read-write | current | This object specifies the loss of signal timeout on any incoming stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2 | TablempegInputTSTable | not-accessible | current | This table specifies the attributes of video sessions or SPTSs. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1 | RowmpegInputTSEntry | not-accessible | current | Each entry specifies the attributes of a transport stream (SPTS/MPTS). |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.1 | ColumnmpegInputTSIndex | not-accessible | current | The unique identifier of the Input TS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.2 | ColumnmpegInputTSType | read-only | current | The type of stream, e.g., SPTS or MPTS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.3 | ColumnmpegInputTSConnectionType | read-only | current | The type of input flow of the stream. The value 'udp' indicates either unicast or multicast udp origination flows. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.4 | ColumnmpegInputTSConnection | read-only | current | The reference to the start of the data source table that feeds content to the input stream. For the Connection Type 'udp' this object contains the pointer to t… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.5 | ColumnmpegInputTSActiveConnection | read-only | current | The reference to the instance of the data source that is feeding the input stream. For the Connection Type 'udp' this object contains the pointer to the UDP Or… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.6 | ColumnmpegInputTSPsiDetected | read-only | current | A simple check that Program Specific Information has or has not been detected. The value 'true' indicates PSI was detected. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.7 | ColumnmpegInputTSStartTime | read-only | current | Specifies the time the MPEG device started receiving the stream, i.e., the time the entry was added to the table. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.8 | ColumnmpegInputTSResourceAllocated | read-only | current | If true, all resources have been allocated for the stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.9 | ColumnmpegInputTSNumPrograms | read-only | current | The number of programs in the input transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.10 | ColumnmpegInputTSRate | read-only | current | The data rate of the incoming program or SPTS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.11 | ColumnmpegInputTSMaxRate | read-only | current | The maximum data rate of the incoming stream for either a variable or constant bit rate stream (VBR/CVR). |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.12 | ColumnmpegInputTSPatVersion | read-only | current | Program Association Table version of the transport stream. The value -1 means PAT version is not supported for input transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.13 | ColumnmpegInputTSCatVersion | read-only | current | The Conditional Access Table version number of transport stream. The value -1 means CAT version is not supported for input transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.14 | ColumnmpegInputTSNitPid | read-only | current | NIT PID of the input transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.15 | ColumnmpegInputTSNumEmms | read-only | current | The number of EMMs in the input stream. The default value 9999 means the device does not support encryption. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.16 | ColumnmpegInputTSTSID | read-only | current | The input TSID of the transport stream. A valid TSID is of 16 bits length. If TSID is not supported, all 32-bits shall be set to 1. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.17 | ColumnmpegInputTSLock | read-only | current | Indicates the lock status of the transport stream. 'intermittent' means the transport stream is transitioning between lock and unlock state over a period of ti… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3 | TablempegInputProgTable | not-accessible | current | The table describing the PSI of each incoming program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1 | RowmpegInputProgEntry | not-accessible | current | Each entry specifies the parameters for each incoming program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.1 | ColumnmpegInputProgIndex | not-accessible | current | This object serves as the third index of this mib table. The index should uniquely identify a program given a transport stream index. In other words, it's uniq… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.2 | ColumnmpegInputProgNo | read-only | current | This object specifies the identifier of the program present in the transport stream of the incoming video stream. This information is contained in PAT table. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.3 | ColumnmpegInputProgPmtVersion | read-only | current | This object specifies the PMT version of the program. It is a 5-bit unsigned integer. The default value of 0 means input program PMT version is no supported. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.4 | ColumnmpegInputProgPmtPid | read-only | current | PMT PID of the program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.5 | ColumnmpegInputProgPcrPid | read-only | current | PCR PID of the program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.6 | ColumnmpegInputProgEcmPid | read-only | current | This object specifies the ECM PID of the program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.7 | ColumnmpegInputProgNumElems | read-only | current | The number of elementary streams in the program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.8 | ColumnmpegInputProgNumEcms | read-only | current | The number of ECMs for the program. The default value 9999 means the device does not support encryption. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.9 | ColumnmpegInputProgCaDescr | read-only | current | Conditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific informa… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.10 | ColumnmpegInputProgScte35Descr | read-only | current | SCTE 35 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due … |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.11 | ColumnmpegInputProgScte18Descr | read-only | current | SCTE 18 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due … |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4 | TablempegProgESTable | not-accessible | current | This table contains information about the elementary streams in a program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1 | RowmpegProgESEntry | not-accessible | current | A combination of mpegInputTSIndex, mpegInputProgIndex and mpegProgESIndex uniquely identifies an entry in the mpegProgESTable. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.1 | ColumnmpegProgESIndex | not-accessible | current | The unique index of the elementary stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.2 | ColumnmpegProgESPID | read-only | current | This is the PID for each transport stream packet which carries the program element. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.3 | ColumnmpegProgESType | read-only | current | The type of elementary stream(video, audio, or data) of the incoming video session received from the video server. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.4 | ColumnmpegProgESCaDescr | read-only | current | CA descriptor associated with the elementary stream. If there is no CA descriptor for the elementary stream, then this object has a zero-length string. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.5 | ColumnmpegProgESScte35Descr | read-only | current | SCTE 35 descriptor. If not supported or present, a zero-length string is returned. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.6 | ColumnmpegProgESScte18Descr | read-only | current | SCTE 18 descriptor. If not supported or present, a zero-length string is returned. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5 | TablempegInputStatsTable | not-accessible | current | Stream statistics, SPTS or MPTS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1 | RowmpegInputStatsEntry | not-accessible | current | Each entry describes statistics for each Input TS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.1 | ColumnmpegInputStatsPcrJitter | read-only | current | This object stores the difference between the actual value of the PCR and its expected value. It is expressed in nanoseconds. This object is default to -1 if i… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.2 | ColumnmpegInputStatsMaxPacketJitter | read-only | current | This object stores the measurement of the maximum variation in arrival time or delay between individual packets. It is expressed in milliseconds. This object i… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.3 | ColumnmpegInputStatsPcrPackets | read-only | current | This reflects the number of MPEG transport packets, having PCR, received for the stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.4 | ColumnmpegInputStatsNonPcrPackets | read-only | current | This reflects the number of MPEG transport packets, without PCR, received for the stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.5 | ColumnmpegInputStatsUnexpectedPackets | read-only | current | This reflects the number of transport packets whose PIDs are not expected. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.6 | ColumnmpegInputStatsContinuityErrors | read-only | current | Transport packets have continuity counters. Successive packets have contiguous values in the continuity counter. Continuity counter error occurs when the succe… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.7 | ColumnmpegInputStatsSyncLossPackets | read-only | current | When a sync byte is missing in a MPEG packet this value is incremented. This value indicates the number of MPEG packets that had missing sync byte per stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.8 | ColumnmpegInputStatsPcrIntervalExceeds | read-only | current | Indicates the number of times that the interval between two successive PCR packets for any program in the transport stream exceeds 100 milliseconds. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6 | TablempegInputUdpOriginationTable | not-accessible | current | Specifies the UDP unicast or multicast flows of an input transport stram. For unicast it represents the UDP port and optionally destination IP address of the i… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1 | RowmpegInputUdpOriginationEntry | not-accessible | current | Each entry specifies the IP UDP information of the input TS origination. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.1 | ColumnmpegInputUdpOriginationIndex | not-accessible | current | The unique identifier of the UDP input TS origination information. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.2 | ColumnmpegInputUdpOriginationId | not-accessible | current | The unique identifier of each UDP IP flow associated with the input TS UDP origination. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.3 | ColumnmpegInputUdpOriginationIfIndex | read-only | current | The interface index where the UDP flow is being received. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.4 | ColumnmpegInputUdpOriginationInetAddrType | read-only | current | The address type associated with input TS origination UDP IP flow. 'ipv4' and 'ipv6' are the only used types. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.5 | ColumnmpegInputUdpOriginationSrcInetAddr | read-only | current | For Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.6 | ColumnmpegInputUdpOriginationDestInetAddr | read-only | current | For multicast it represents the group address of the SSM origination input TS. For unicast UDP IP flows is either the IP destination address of the udp flow or… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.7 | ColumnmpegInputUdpOriginationDestPort | read-only | current | The UDP destination port of the UDP IP flow of the input TS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.8 | ColumnmpegInputUdpOriginationActive | read-only | current | The activation state of the UDP flow. The value 'true' indicates the UDP flow data stream is being sensed or buffered for the input TS, independently of that f… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.9 | ColumnmpegInputUdpOriginationPacketsDetected | read-only | current | Indicates whether UDP flow packets are being detected. It is vendor dependent the determination if packets for a UDP flow are being detected. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.10 | ColumnmpegInputUdpOriginationRank | read-only | current | Indicates the Rank Priority used to determine the UDP flow selected for the input TS processing and Video Session assignments. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.11 | ColumnmpegInputUdpOriginationInputTSIndex | read-only | current | The mpegInputTSIndex that this entry is associated with |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2 | IdentitympegOutputs | current | This branch specifies the attributes of the output streams of the MPEG device. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1 | TablempegInsertPacketTable | not-accessible | current | This table describes packet insertion information. Typical packets that are inserted at the RF output of a device are PSI, PSIP, and CVCT MPEG packets. These p… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1 | RowmpegInsertPacketEntry | not-accessible | current | An entry in the Packet Management Table. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.1 | ColumnmpegInsertPacketIndex | not-accessible | current | Index of list of packets being inserted into all MPEG streams. This index is unique within the SNMP agent that may be managing multiple MPEG devices. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.2 | ColumnmpegInsertPacketListId | read-only | current | Reference number of packets being inserted into MPEG stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.3 | ColumnmpegInsertPacketImmediateExecution | read-only | current | If true, packet insertion starts immediately. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.4 | ColumnmpegInsertPacketStartTime | read-only | current | Unix epoch start time for insertions (if Immediate Execution is false). |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.5 | ColumnmpegInsertPacketRepeat | read-only | current | Indicates whether the insert packet is one-time or repetitive. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.6 | ColumnmpegInsertPacketContinuousFlag | read-only | current | If true, packet will be sent periodically, until cancelled. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.7 | ColumnmpegInsertPacketRate | read-only | current | Rate at which packet list should be inserted. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.8 | ColumnmpegInsertPacketDeviceIfIndex | read-only | current | The ifIndex of the output device interface that the packet will be inserted at. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2 | TablempegOutputStatsTable | not-accessible | current | The table specifies the diagnostic stats objects for the outputs transport stream of an MPEG device. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1 | RowmpegOutputStatsEntry | not-accessible | current | Each entry specifies the diagnostics for each output TS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.1 | ColumnmpegOutputStatsDroppedPackets | read-only | current | Number of MPEG packets dropped on this output transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.2 | ColumnmpegOutputStatsFifoOverflow | read-only | current | Number of FIFO overflows on this output transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.3 | ColumnmpegOutputStatsFifoUnderflow | read-only | current | Number of FIFO underflows on this output transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.4 | ColumnmpegOutputStatsDataRate | read-only | current | Data rate for the content on this output transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.5 | ColumnmpegOutputStatsAvailableBandwidth | read-only | current | Unused bandwidth on this port. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.6 | ColumnmpegOutputStatsChannelUtilization | read-only | current | The current utilization of a channel defined as (measured data rate / total bandwidth ) * 1000. If not applicable, a value of -1 is returned. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.7 | ColumnmpegOutputStatsTotalPackets | read-only | current | The total number of packets output for this transport stream since the start of the output stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3 | TablempegOutputTSTable | not-accessible | current | This table specifies the attributes of an outgoing transport stream SPTS or MPTS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1 | RowmpegOutputTSEntry | not-accessible | current | Each entry specifies the attributes of an output transport stream, SPTS or MPTS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.1 | ColumnmpegOutputTSIndex | not-accessible | current | Table index. It uniquely identifies a mpegOutputTSEntry. This index is independent from mpegOutputTSTSID. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.2 | ColumnmpegOutputTSType | read-only | current | The type of stream, e.g., SPTS or MPTS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.3 | ColumnmpegOutputTSConnectionType | read-only | current | The type of output flow of the stream. The value 'qam' indicates a QAM output for the stream The value 'udp' indicates either unicast or multicast udp destinat… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.4 | ColumnmpegOutputTSConnection | read-only | current | The reference to the instance of the output connection fpr the output stream. For the Connection Type 'qam' this object contains the ifIndex object identifier … |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.5 | ColumnmpegOutputTSNumPrograms | read-only | current | The number of programs in the output transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.6 | ColumnmpegOutputTSTSID | read-only | current | The TSID of the output transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.7 | ColumnmpegOutputTSNitPid | read-only | current | NIT PID of the outgoing transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.8 | ColumnmpegOutputTSCaPid | read-only | current | The CA PID of the outgoing transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.9 | ColumnmpegOutputTSCatInsertRate | read-only | current | The CAT insertion rate. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.10 | ColumnmpegOutputTSPatInsertRate | read-only | current | The PAT table interval expressed in ms. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.11 | ColumnmpegOutputTSPmtInsertRate | read-only | current | The PMT insertion rate. This is expressed in tables/second. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.12 | ColumnmpegOutputTSStartTime | read-only | current | This object specifies the time the MPEG device started transmitting the output stream, i.e., the time the entry was added to the table. The support of this obj… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4 | TablempegOutputProgTable | not-accessible | current | The table describing the PSI of each outgoing program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1 | RowmpegOutputProgEntry | not-accessible | current | Each entry specifies the parameters for each incoming program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.1 | ColumnmpegOutputProgIndex | not-accessible | current | This object is the table index for output program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.2 | ColumnmpegOutputProgNo | read-only | current | This object specifies the identifier of the program present in the transport stream of the outgoing program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.3 | ColumnmpegOutputProgPmtVersion | read-only | current | This object specifies the PMT version of the outgoing program. The default value of 0 means output program PMT version is not supported. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.4 | ColumnmpegOutputProgPmtPid | read-only | current | PMT PID of the outgoing program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.5 | ColumnmpegOutputProgPcrPid | read-only | current | PCR PID of the outgoing program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.6 | ColumnmpegOutputProgEcmPid | read-only | current | This object specifies the ECM PID of the outgoing program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.7 | ColumnmpegOutputProgNumElems | read-only | current | The number of elementary streams in the outgoing program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.8 | ColumnmpegOutputProgNumEcms | read-only | current | The number of ECMs for the outgoing program. The default value 9999 means the device does not support encryption. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.9 | ColumnmpegOutputProgCaDescr | read-only | current | Conditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific informa… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.10 | ColumnmpegOutputProgScte35Descr | read-only | current | SCTE 35 descriptor in the outgoing program. This object is set to a string of zero-length if there's no SCTE 35 descriptor in the outgoing program or not suppo… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.11 | ColumnmpegOutputProgScte18Descr | read-only | current | SCTE 18 descriptor. If not present or not supported, a zero-length string is returned. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5 | TablempegOutputProgElemStatsTable | not-accessible | current | The stats associated with the elementary streams of an MPEG program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1 | RowmpegOutputProgElemStatsEntry | not-accessible | current | Each entry constitutes the stats for a program associated with a transport stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.1 | ColumnmpegOutputProgElemStatsIndex | not-accessible | current | The unique identifier of the elementary stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.2 | ColumnmpegOutputProgElemStatsPid | not-accessible | current | The Pid of output program elementary stream. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.3 | ColumnmpegOutputProgElemStatsElemType | read-only | current | The type of elementary stream (video, audio, or data) of the program. Some devices, such as device, may choose not to report exact type due to scalability issu… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.4 | ColumnmpegOutputProgElemStatsDataRate | read-only | current | The data rate of the elementary stream. Return -1 if not supported. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6 | TablempegOutputUdpDestinationTable | not-accessible | current | Specifies the UDP unicast or multicast of the output TS this entry references. For unicast it represents the UDP port and optionally destination IP address of … |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1 | RowmpegOutputUdpDestinationEntry | not-accessible | current | Each entry specifies the IP UDP information of the output TS destination. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.1 | ColumnmpegOutputUdpDestinationIndex | not-accessible | current | The unique identifier of the UDP output TS destination information. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.2 | ColumnmpegOutputUdpDestinationId | not-accessible | current | The unique identifier of each UDP IP flow associated with the output TS UDP destination. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.3 | ColumnmpegOutputUdpDestinationIfIndex | read-only | current | The interface index where the UDP flow is being sent. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.4 | ColumnmpegOutputUdpDestinationInetAddrType | read-only | current | The address type associated with output TS destination UDP IP flow. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.5 | ColumnmpegOutputUdpDestinationSrcInetAddr | read-only | current | For Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.6 | ColumnmpegOutputUdpDestinationDestInetAddr | read-only | current | For multicast it represents the group address of the SSM destination output TS. For unicast UDP IP flows is either the IP destination address of the udp flow o… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.7 | ColumnmpegOutputUdpDestinationDestPort | read-only | current | The UDP port of the UDP IP flow of the output TS. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.8 | ColumnmpegOutputUdpDestinationOutputTSIndex | read-only | current | The mpegOutputTSIndex that this entry is associated with. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3 | TablempegProgramMappingTable | not-accessible | current | This table describes program mappings, i.e., ties the input destination to the output destination for every program active in the device. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1 | RowmpegProgramMappingEntry | not-accessible | current | Each entry describes the mapping, i.e., ties input destination to output destination for a given program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.1 | ColumnmpegProgramMappingIndex | not-accessible | current | The table index uniquely identifies an entry in mpegProgramMappingTable. This index should be unique within the same SNMP agent that may be managing multiple M… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.2 | ColumnmpegProgramMappingOutputProgIndex | read-only | current | This object is set to mpegOutputProgIndex of the corresponding entry in mpegOutputProgTable for a given output program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.3 | ColumnmpegProgramMappingOutputTSIndex | read-only | current | This object is set to mpegOutputTSIndex of the corresponding entry in mpegOutputProgTable for a given output program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.4 | ColumnmpegProgramMappingInputProgIndex | read-only | current | This object is set to the value of mpegInputProgIndex of the corresponding entry in mpegInputProgTable for a given input program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.5 | ColumnmpegProgramMappingInputTSIndex | read-only | current | This object is set to the value of mpegInputTSIndex of the corresponding entry in mpegInputProgTable for a given input program. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4 | TablempegVideoSessionTable | not-accessible | current | This table is used to store video session information. The session may be of VOD, SDV or DB type. It captures logical information about a video stream, such as… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1 | RowmpegVideoSessionEntry | not-accessible | current | Each entry describes a logical video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.1 | ColumnmpegVideoSessionIndex | not-accessible | current | The table index uniquely identifies an entry in mpegVideoSessionTable. This index should be unique within the same SNMP agent that may be managing multiple MPE… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.2 | ColumnmpegVideoSessionPhyMappingIndex | read-only | current | This object shall be set to mpegProgramMappingIndex of the corresponding mpegProgramMappingEntry which contains physical mapping between the input and output p… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.3 | ColumnmpegVideoSessionPIDRemap | read-only | current | This object value 'true' indicates that the session has PID remapping. The value 'false' indicates that the session has no PID remapping. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.4 | ColumnmpegVideoSessionMode | read-only | current | Indicates whether the transport stream is associated with a multiplexed session or is pass-through. For pass-through type transport streams, all elementary str… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.5 | ColumnmpegVideoSessionState | read-only | current | active means in-use, provisioned means not-in-use or active such as video session provisioned for redundant source. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.6 | ColumnmpegVideoSessionProvMethod | read-only | current | The type of session, e.g., in QAM table-based or session-based. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.7 | ColumnmpegVideoSessionEncryptionType | read-only | current | Indicates the encryption algorithm of the session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.8 | ColumnmpegVideoSessionEncryptionInfo | read-only | current | Indicates a vendor-specific reference to information associated to the session encryption algorithm. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.9 | ColumnmpegVideoSessionBitRate | read-only | current | Indicates a session throughtput in bps. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.10 | ColumnmpegVideoSessionID | read-only | current | The session ID associated with the stream in the case of a session-based QAM. This is not applicable to a table-based QAM. This ID may be used by NMS system to… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.11 | ColumnmpegVideoSessionSelectedInput | read-only | current | The reference to the entry of the input flow currently being used in the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.12 | ColumnmpegVideoSessionSelectedOutput | read-only | current | The reference to the entry of the output flow currently being used in the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5 | TablempegVideoSessionPtrTable | not-accessible | current | This table is used to provide a quick reference of the Program Mapping and input/output TS connection information associated with a Video Session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1 | RowmpegVideoSessionPtrEntry | not-accessible | current | Each entry describes the associations with ProgramMapping and transport stream connections. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.1 | ColumnmpegVideoSessionPtrInputProgIndex | not-accessible | current | Indicates the Input Program index value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.2 | ColumnmpegVideoSessionPtrInputTSIndex | not-accessible | current | Indicates the input TS index value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.3 | ColumnmpegVideoSessionPtrInputTSConnType | not-accessible | current | Indicates the Input TS Connection type value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.4 | ColumnmpegVideoSessionPtrInputTSConnection | not-accessible | current | Indicates the Input TS Connection value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.5 | ColumnmpegVideoSessionPtrOutputProgIndex | not-accessible | current | Indicates the Output Program index value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.6 | ColumnmpegVideoSessionPtrOutputTSIndex | not-accessible | current | Indicates the Output TS index value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.7 | ColumnmpegVideoSessionPtrOutputTSConnType | not-accessible | current | Indicates the Output TS Connection type value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.8 | ColumnmpegVideoSessionPtrOutputTSConnection | not-accessible | current | Indicates the Output TS Connection value of the video session. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.9 | ColumnmpegVideoSessionPtrStatus | read-only | current | Indicates the status of the session. Only active sessions need to be reported. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.6 | TablempegInputTSOutputSessionTable | not-accessible | current | Specifies the list of Output Session indexes that the Input TS entry is feeding. For unicast it will typically point to just one output Session. For multicast,… |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.6.1 | RowmpegInputTSOutputSessionEntry | not-accessible | current | Each entry specifies the sessionID associated with the Input TS Entry Index. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.1.6.1.1 | ColumnmpegInputTSOutputSessionCreateTime | read-only | current | Indicates the Creation Time of the session referenced by this entry. |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2 | IdentitympegMIBConformance | current | This branch describes the different MPEG MIB object groups and the different levels of compliance. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.1 | IdentitympegMIBCompliances | current | The different levels of compliance to the MPEG MIB. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.1.1 | CompliancempegSupport | current | These objects describe the support level for MPEG. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2 | IdentitympegMIBGroups | current | The MPEG MIB object groups. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2.1 | GroupmpegInputGroup | current | The input objects of the MPEG device. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2.2 | GroupmpegInputProgESGroup | current | This table contains information about the elementary streams in a program. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2.3 | GroupmpegOutputGroup | current | The output objects of the MPEG device. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2.4 | GroupmpegOutputProgElemStatsGroup | current | The stats associated with the elementary streams of an MPEG program. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2.5 | GroupmpegMappingsGroup | current | The group of objects describing program mappings within the Device. | |
| 1.3.6.1.4.1.5591.1.11.5.4.1.2.2.6 | GroupmpegSessionsGroup | current | The group of objects describing program mappings within the Device. |