SCTE-HMS-QAM-MIB
35 objects
This MIB module is for representing Edge QAM equipment present in the headend (or indoor) and is supported by a SNMP agent. It defines QAM channel related configuration MIB objects associated with both QAM channel's physical and logical characteristics. qamChannelTable is optional for devices that are supporting equivalent DOCSIS MIB objects. qamConfigTable is optional and applies to devices that choose to provide logical level configuration.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SCTE-HMS-HEADENDIDENT-TC-MIB | QAMChannelInterleaveMode QAMChannelModulationFormat |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.5.3.1 | IdentityheDigitalQamMIB | This MIB module is for representing Edge QAM equipment present in the headend (or indoor) and is supported by a SNMP agent. It defines QAM channel related conf… | ||
| 1.3.6.1.4.1.5591.1.11.5.3.1.1 | IdentityqamMIBObjects | current | This branch specifies the QAM MIB objects. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1 | TableqamChannelTable | not-accessible | current | This table describes the configuration and attributes of each QAM channel of the QAM designated by ifIndex. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1 | RowqamChannelEntry | not-accessible | current | There is an entry in the table for each QAM channel. The index to this table is the ifIndex of each QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.1 | ColumnqamChannelFrequency | read-only | current | The center frequency of the QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.2 | ColumnqamChannelModulationFormat | read-only | current | RF Modululation for this output QAM channel when qamChannelContWaveMode is off. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.3 | ColumnqamChannelInterleaverLevel | read-only | current | The interleaver level for FEC coding. level1 - implies interleaver level 1 level2 - implies interleaver level 2 This object is only valid when AnnexMode has th… |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.4 | ColumnqamChannelInterleaverMode | read-only | current | The interleaving depth or operation mode of the interleaver. 'taps8Increment16': protection 5.9/4.1 usec, latency .22/.15 msec 'taps16Increment8': protection 1… |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.5 | ColumnqamChannelPower | read-only | current | The output power of the QAM channel. If the QAM channel is muted, value is not valid. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.6 | ColumnqamChannelSquelch | read-only | current | Indicates whether the QAM port is muted or not. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.7 | ColumnqamChannelContWaveMode | read-only | current | Indicates whether Continuous Wave mode is enabled or not for output. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.8 | ColumnqamChannelAnnexMode | read-only | current | Specifies the ITU-T standard supported by the QAM channel annexA - standard specified by Annex A of ITU-T J.83 annexB - standard specified by Annex B of ITU-T … |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.2 | TableqamChannelCommonTable | not-accessible | current | This table decribes MPEG and DOCSIS characteristics that are not part of the DOCSIS-IF-MIB. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1 | RowqamChannelCommonEntry | not-accessible | current | Each entry of this table describes attributes of an RF channel for both MPEG and DOCSIS QAMs. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1.1 | ColumnqamChannelCommonOutputBw | read-only | current | The QAM channel output bandwidth or capacity. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1.2 | ColumnqamChannelCommonUtilization | read-only | current | The utilization of the QAM channel in 0.1 percentage. This rate may be calculated as transport stream packets / ( transport stream packets + null packets ). If… |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3 | TableqamConfigTable | not-accessible | current | This table is designed to show the IP addresses configuration for the QAM channels, optionally UDP port range, Program Number range associated with QAM channel… |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1 | RowqamConfigEntry | not-accessible | current | Each entry corresponds to the configuration of a QAM channel range. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.1 | ColumnqamConfigIndex | not-accessible | current | The table index. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.2 | ColumnqamConfigQamChannelIdMin | read-only | current | QAMChannelId maybe within a line card or global depending on entPhysicalIndex. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.3 | ColumnqamConfigQamChannelIdMax | read-only | current | QAMChannelId maybe within a line card or global depending on entPhysicalIndex. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.4 | ColumnqamConfigIPAddrType | read-only | current | The type of the program destination address as defined by inetAddressType. The default value is 1 for ipv4(1) |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.5 | ColumnqamConfigIPAddr | read-only | current | IP address of the QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.6 | ColumnqamConfigUdpPortRangeMin | read-only | current | The lowest UDP port of the UDP port range that can be used on this QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.7 | ColumnqamConfigUdpPortRangeMax | read-only | current | The highest UDP port of the UDP port range that can be used on this QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.8 | ColumnqamConfigOutputProgNoMin | read-only | current | The lowest MPEG output program number that can be used on the QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.9 | ColumnqamConfigOutputProgNoMax | read-only | current | The highest MPEG output program number that can be used on the QAM channel. |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2 | IdentityqamMIBConformance | current | This branch describes the different QAM MIB object groups and the different level of compliance. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.1 | IdentityqamMIBCompliances | current | The different levels of compliance to the QAM MIB. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.1.1 | ComplianceqamSupport | current | These objects describe the support level for QAM. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.1.2 | CompliancedocsisSupport | current | These objects are not covered by any DOCSIS MIB, but they would need to be supported by a DOCSIS EQAM. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.2 | IdentityqamMIBGroups | current | The QAM MIB object groups. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.2.1 | GroupqamMpegDocsisCommonGroup | current | These objects are not covered by any DOCSIS MIB. It is legitimate for a DOCSIS QAM to support them. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.2.2 | GroupqamChannelGroup | current | The objects characterizing the RF channel and that may be supported by an equivalent DOCSIS MIB object. | |
| 1.3.6.1.4.1.5591.1.11.5.3.1.2.2.3 | GroupqamConfigGroup | current | QAM configuration objects. |