SL-ENTITY-MIB
32 objects
The MIB module for representing multiple physical entities supported by a single SNMP agent. The MIB is based on the standard RFC-2737 entity-mib.
Imported Objects
| IF-MIB | InterfaceIndex |
| SL-MAIN-MIB | slMain |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | AutonomousType DisplayString PhysAddress RowStatus TAddress TDomain TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.3.6 | IdentityslmEntity | The MIB module for representing multiple physical entities supported by a single SNMP agent. The MIB is based on the standard RFC-2737 entity-mib. | ||
| 1.3.6.1.4.1.4515.1.3.6.1 | NodeslEntityPhysical | |||
| 1.3.6.1.4.1.4515.1.3.6.1.1 | TableslEntPhysicalTable | not-accessible | current | This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1 | RowslEntPhysicalEntry | not-accessible | current | Information about a particular physical entity. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.1 | ColumnslEntPhysicalIndex | read-only | current | The Slot number of the entity. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.2 | ColumnslEntPhysicalDescr | read-only | current | A textual description of physical entity. This object should contain a string which identifies the manufacturer's name for the physical entity, and should be s… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.3 | ColumnslEntPhysicalClass | read-only | current | An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value which most accurately indi… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.4 | ColumnslEntPhysicalHardwareRev | read-only | current | The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.5 | ColumnslEntPhysicalFirmwareRev | read-only | current | The vendor-specific firmware revision string for the physical entity (normally the boot-revision). Note that if revision information is stored internally in a … |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.6 | ColumnslEntPhysicalSoftwareRev | read-only | current | The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) … |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.7 | ColumnslEntPhysicalSerialNum | read-only | current | The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if … |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.8 | ColumnslEntPhysicalProtectionEntity | read-only | current | The value of slEntPhysicalIndex for the physical entity which 'protects' this physical entity. A value of zero indicates this physical entity has no protecting… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.9 | ColumnslEntPhysicalProtectState | read-only | current | The protection state of physical entity. This object is not applicable should the protection be done on a per-port basis. In the case of Switch protection the … |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.14 | ColumnslEntPhysicalProtectMode | read-write | current | The protection mode of physical entity. The default value is automatic(3) This object is not applicable should the protection be done on a per-port basis. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.15 | ColumnslEntPhysicalStatus | read-only | current | The physical entity status bitmap: 1 - Card is removed from the slot 2 - Communication Fault 4 - Major alarm inherited from the ports 8 - Card or port HW failu… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.16 | ColumnslEntPhysicalFailureDescription | read-only | current | Text that describes the last entity failure. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.17 | ColumnslEntPhysicalAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.18 | ColumnslEntPhysicalOperStatus | read-only | current | The current operational state of the interface. If slEntPhysicalAdminStatus is down(2) then slEntPhysicalOperStatus should be down(2). If slEntPhysicalAdminSta… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.19 | ColumnslEntPhysicalSysUptime | read-only | current | The number of timer ticks since the last reboot of the module. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.20 | ColumnslEntPhysicalType | read-only | current | The type of the physical module. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.21 | ColumnslEntPhysicalCleiCode | read-only | current | The Clei Code resides in the SEEP of each card. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.22 | ColumnslEntPhysicalPartNumber | read-only | current | The card part number. This is a string of upto 12 characters. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.23 | ColumnslEntPhysicalOemSerialNum | read-only | current | The oem-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if pre… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.24 | ColumnslEntPhysicalProductionDate | read-write | current | The entity production date in the format YYYY-WW. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.25 | ColumnslEntPhysicalSysTemp | read-only | current | Internally measured module temperature. The value 0 means -128 Celsuis. An increment on one is equivalent to 1/256 degree, yielding a total range of -128 to +1… |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.26 | ColumnslEntPhysicalSysAlias | read-write | current | The module alias as given by the user. |
| 1.3.6.1.4.1.4515.1.3.6.1.1.1.27 | ColumnslEntPhysicalSysSubType | read-only | current | The subtype of the physical module. The possibel values of this object are drived from the value of slEntPhysicalType. |
| 1.3.6.1.4.1.4515.1.3.6.2 | NodeslEntityNotification |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CleiCode | DisplayString (SIZE (10)) | current | COMMON LANGUAGE Equipment Code. The CLEI code contains an intelligent ten-character code that identifies the telecommunications equipment. |
| PhysicalClass | INTEGER { other(1), unknown(2), chassis(3), backplane(4), container(5), powerSupply(6), fan(7), sensor(8), module(9), port(10), stack(11) } | current | An enumerated value which provides an indication of the general hardware type of a particular physical entity. There are no restrictions as to the number of slEntPhysicalEntries of each slEntPhysicalClass, which must be… |
| PhysicalIndex | INTEGER (0..255) | current | An arbitrary value which uniquely identifies the physical entity. The value should be a small positive integer; index values for different physical entities are not necessarily contiguous. The index 0 is for the Shelf. … |
| PhysicalType | INTEGER { powerModule(1), fanModule(2), switchModule(3), edfaModule(14), ocmModule(15), otdrModule(16), lc400G(21), unknown(100) } | current | An enumerated value which provides an indication of the general card type of a particular physical entity. There are no restrictions as to the number of slEntPhysicalEntries of each PhysicalType, which must be instantia… |