SL-OPT-APS-MIB
38 objects
This MIB module describes the Optical APS.
Imported Objects
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-MAIN-MIB | slmTrapLogId |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.11 | IdentityslOptApsMib | This MIB module describes the Optical APS. | ||
| 1.3.6.1.4.1.4515.1.11.1 | NodeslOptApsConfig | |||
| 1.3.6.1.4.1.4515.1.11.1.1 | TableoptApsConfigTable | not-accessible | current | This table contains objects to configure APS (Automatic Protection Switching) feature in a Optical Channel. APS is the ability to configure a pair of Optical c… |
| 1.3.6.1.4.1.4515.1.11.1.1.1 | RowoptApsConfigEntry | not-accessible | current | An entry is identified by two transponding connections that should protect each other. |
| 1.3.6.1.4.1.4515.1.11.1.1.1.1 | ColumnoptApsConfigUserWorkingIndex | read-create | current | The ifIndex of the working optical interface connected to the User side. |
| 1.3.6.1.4.1.4515.1.11.1.1.1.2 | ColumnoptApsConfigNetWorkingIndex | read-create | current | The ifIndex of the working optical interface connected to the Network side. |
| 1.3.6.1.4.1.4515.1.11.1.1.1.3 | ColumnoptApsConfigUserProtectingIndex | read-create | current | The ifIndex of the protecting optical interface connected to the User side. In the case of an Inline connection there is no meaning to the order between the Us… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.4 | ColumnoptApsConfigNetProtectingIndex | read-create | current | The ifIndex of the protecting optical interface connected to the Network side. In the case of an Inline connection there is no meaning to the order between the… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.5 | ColumnoptApsConfigScheme | read-create | current | This object is used to configure the optical protection scheme. equipment : Equipmet protection (with 4 FEO's) facility : Facility protection (only 3 FEO's) |
| 1.3.6.1.4.1.4515.1.11.1.1.1.6 | ColumnoptApsConfigEnable | read-create | current | This object is used to enable or disable the APS feature on the working/protection connection pairs. When enabled, the hardware will automatically switch the a… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.7 | ColumnoptApsConfigArchMode | read-create | current | This object is used to configure APS architecture mode on the working/protection connection pairs (read-write). |
| 1.3.6.1.4.1.4515.1.11.1.1.1.8 | ColumnoptApsConfigActiveConnectionRx | read-only | current | This object indicates which Rx connection is currently active. It could be the working connection, the protection connection or none if neither working nor pro… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.9 | ColumnoptApsConfigActiveConnectionTx | read-only | current | This object indicates which Tx connection is currently active. It could be the working connection, the protection connection or none if neither working nor pro… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.10 | ColumnoptApsConfigWaitToRestore | read-create | current | This object contains interval in minutes to wait before attempting to switch back to working connection. Not applicable if the connection is configured in non-… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.11 | ColumnoptApsConfigDirection | read-create | current | This object is used to configure the switching direction which this APS connection supports (read-write). Unidirectional : APS switch only in one direction. Bi… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.12 | ColumnoptApsConfigRevertive | read-create | current | This object is used to configure the APS revertive or nonrevertive option (read-write). revertive : Will switch the working connection back to active state aft… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.13 | ColumnoptApsConfigChanStatus | read-only | current | Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prevented from switching to the p… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.14 | ColumnoptApsConfigChanSignalFailures | read-only | current | A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal is detected. |
| 1.3.6.1.4.1.4515.1.11.1.1.1.15 | ColumnoptApsConfigChanSwitchovers | read-only | current | The number of times this channel has switched to the protection connection. When queried with index value apsChanNumber set to 0, which is the protection conne… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.16 | ColumnoptApsConfigChanLastSwitchover | read-only | current | The value of sysUpTime when this channel last completed a switch to the protection connection. If this channel has never switched to the protection connection,… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.17 | ColumnoptApsConfigSwitchCommand | read-create | current | A switch command initiates one external request for evaluation (read-write). (1) Clear - Clears all switch commands on the channel. (2) Lockout Of Protection -… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.18 | ColumnoptApsConfigSwitchReason | read-only | current | The reason why APS switch happened. When the working connection on one end fails, its other end is told to do an APS switch. The following options in the incre… |
| 1.3.6.1.4.1.4515.1.11.1.1.1.19 | ColumnoptApsConfigResetCounters | read-create | current | Setting this variable to 1 will cause the counters on all of the Optical APS Config Table to be initialized to zero (read-write). |
| 1.3.6.1.4.1.4515.1.11.1.1.1.20 | ColumnoptApsConfigActiveRequest | read-only | current | The Active Switch APS request: optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is … |
| 1.3.6.1.4.1.4515.1.11.1.1.1.21 | ColumnoptApsConfigStatus | read-create | current | This object is used to create and delete rows in the optApsConfigTable. |
| 1.3.6.1.4.1.4515.1.11.1.1.1.22 | ColumnoptApsConfigLosThreshold | read-write | current | Configured threshold value for LOS detection of the optical switch. This object is applicable only when slmOpticalSwitchExist is TRUE. The value given in 0.1 d… |
| 1.3.6.1.4.1.4515.1.11.1.2 | TableeqptApsConfigTable | not-accessible | current | This table contains objects to configure Equipment APS (Automatic Protection Switching) feature. |
| 1.3.6.1.4.1.4515.1.11.1.2.1 | RoweqptApsConfigEntry | not-accessible | current | This configuration is on device level thus only one entry exists. |
| 1.3.6.1.4.1.4515.1.11.1.2.1.1 | ColumneqptApsConfigDummyIndex | read-only | current | A dummy index. Always 1. |
| 1.3.6.1.4.1.4515.1.11.1.2.1.2 | ColumneqptApsConfigRole | read-write | current | The device role. |
| 1.3.6.1.4.1.4515.1.11.1.2.1.3 | ColumneqptApsConfigMate | read-write | current | The IP address of the mate device. |
| 1.3.6.1.4.1.4515.1.11.1.2.1.4 | ColumneqptApsConfigLinkStatus | read-write | current | The IP address of the mate device. |
| 1.3.6.1.4.1.4515.1.11.2 | NodeslOptApsTraps | |||
| 1.3.6.1.4.1.4515.1.11.2.0 | NodeslOptApsTraps0 | |||
| 1.3.6.1.4.1.4515.1.11.2.0.1 | NotificationoptApsTrapSwitchover0 | current | An optApsTrapSwitchover notification is sent when the value of an instance of optApsChanSwitchovers increments. It is defined to support browsers that don't re… | |
| 1.3.6.1.4.1.4515.1.11.2.0.2 | NotificationoptApsConfigTableChanged0 | current | An optApsConfigTableChanged notification is sent when the content of the optApsConfigTable is changed. The added/deleted entry is identified by the optApsUserW… | |
| 1.3.6.1.4.1.4515.1.11.2.1 | NotificationoptApsTrapSwitchover | current | An optApsTrapSwitchover notification is sent when the value of an instance of optApsChanSwitchovers increments. | |
| 1.3.6.1.4.1.4515.1.11.2.2 | NotificationoptApsConfigTableChanged | current | An optApsConfigTableChanged notification is sent when the content of the optApsConfigTable is changed. The added/deleted entry is identified by the optApsUserW… |