SL-TESTS-MIB
17 objects
This MIB module describes the available on-demand tests.
Imported Objects
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-MAIN-MIB | slMain slmTrapLogId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.3.13 | IdentityslTests | This MIB module describes the available on-demand tests. | ||
| 1.3.6.1.4.1.4515.1.3.13.1 | NodeslTestsIfLoop | |||
| 1.3.6.1.4.1.4515.1.3.13.1.1 | TableslTestsIfLoopTable | not-accessible | current | The port loopback test table. This table controls the port loopback tests. |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1 | RowslTestsIfLoopEntry | not-accessible | current | This entry is used to operate an port loopback test. |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.1 | ColumnslTestsIfLoopIfIndex | read-only | current | The Interface Index of the port that should be loopped back. |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.2 | ColumnslTestsIfLoopDuration | read-write | current | The test duration in 1/10 Sec. The maximum allowed duration is 1 hour. After this time the port configuration returns to its original setting and the Agent aut… |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.3 | ColumnslTestsIfLoopStatus | read-write | current | This variable is used to start or stop a loopback test. In order to start a test the NMS should set the value to start(1). If the test mode is toggle, the NMS … |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.5 | ColumnslTestsIfLoopType | read-write | current | The loopback type: facility The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminal Th… |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.6 | ColumnslTestsIfLoopMode | read-write | current | The loopback mode: timeout In this mode the duration of the loopback is determined by the slTestsIfLoopDuration object. toggle In this mode the loopback should… |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.7 | ColumnslTestsIfLoopErrors | read-only | current | The prbs errors are counted only of the test succeeded. |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.8 | ColumnslTestsIfLoopResult | read-only | current | This variable is used for prbs test result indication. |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.9 | ColumnslTestsIfLoopPassedSeconds | read-only | current | Number of seconds passed since the test started. |
| 1.3.6.1.4.1.4515.1.3.13.2 | NodeslTestsTraps | |||
| 1.3.6.1.4.1.4515.1.3.13.2.0 | NodeslTestsTraps0 | |||
| 1.3.6.1.4.1.4515.1.3.13.2.0.2 | NotificationslTestsTrapsLoopbackTableChanged0 | current | A slTestsTrapsLoopbackTableChanged trap is sent when the content of slTestsIfLoopTable changes. When the loop back is deleted the returned value of slTestsIfLo… | |
| 1.3.6.1.4.1.4515.1.3.13.2.1 | ScalarslTestsTrapsLoopbackActive | read-only | current | The Loopback is active Yes/No. |
| 1.3.6.1.4.1.4515.1.3.13.2.2 | NotificationslTestsTrapsLoopbackTableChanged | current | A slTestsTrapsLoopbackTableChanged trap is sent when the content of slTestsIfLoopTable changes. When the loop back is deleted the returned value of slTestsIfLo… |