SLE-MPLS-RSVP-TE-MIB
229 objects
Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001 2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002 3. Requirements for Traffic Engineering Over MPLS, Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M., and J. McManus, [RFC2702], September 1999
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296 | Nodedasan | |||
| 1.3.6.1.4.1.6296.101 | NodesleMgmt | |||
| 1.3.6.1.4.1.6296.101.16 | NodesleMpls | |||
| 1.3.6.1.4.1.6296.101.16.53 | IdentitysleMplsRsvpMibBase | Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: … | ||
| 1.3.6.1.4.1.6296.101.16.53.1 | NodesleMplsRouterRsvpScalars | |||
| 1.3.6.1.4.1.6296.101.16.53.1.1 | NodesleMplsRouterRsvpInfoScalars | |||
| 1.3.6.1.4.1.6296.101.16.53.1.1.1 | ScalarsleMplsRouterRsvpInfo | read-only | current | The object will show rsvp is enabled or not |
| 1.3.6.1.4.1.6296.101.16.53.1.1.2 | ScalarsleMplsRouterRsvpInfoAckWaitTimeOut | read-only | current | The object will show rsvp ack wait time out enable or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.3 | ScalarsleMplsRouterRsvpInfoAckWaitTimeOutValue | read-only | current | The object will show rsvp ack wait time out value |
| 1.3.6.1.4.1.6296.101.16.53.1.1.4 | ScalarsleMplsRouterRsvpInfoBundleSend | read-only | current | The object will show Bundle send enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.1.1.5 | ScalarsleMplsRouterRsvpInfoCspf | read-only | current | The object will show cspf is enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.6 | ScalarsleMplsRouterRsvpInfoDetuorId | read-only | current | The object will show the detour id |
| 1.3.6.1.4.1.6296.101.16.53.1.1.7 | ScalarsleMplsRouterRsvpInfoExplicitNull | read-only | current | The object will show rsvp explict null enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.8 | ScalarsleMplsRouterRsvpInfoFromType | read-only | current | The object will show rsvp ingress router type |
| 1.3.6.1.4.1.6296.101.16.53.1.1.9 | ScalarsleMplsRouterRsvpInfoFromAddress | read-only | current | The object will show rsvp ingress router address |
| 1.3.6.1.4.1.6296.101.16.53.1.1.10 | ScalarsleMplsRouterRsvpInfoGraceRestart | read-only | current | The object will show rsvp graceful restart enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.11 | ScalarsleMplsRouterRsvpInfoGraceRestartTime | read-only | current | The object will show rsvp graceful restart timer |
| 1.3.6.1.4.1.6296.101.16.53.1.1.12 | ScalarsleMplsRouterRsvpInfoGraceRecoveryTime | read-only | current | The object will show rsvp graceful recovery time |
| 1.3.6.1.4.1.6296.101.16.53.1.1.13 | ScalarsleMplsRouterRsvpInfoHelloInterval | read-only | current | The object will show rsvp hello interval |
| 1.3.6.1.4.1.6296.101.16.53.1.1.14 | ScalarsleMplsRouterRsvpInfoHelloReceipt | read-only | current | The object will show rsvp hello receipt |
| 1.3.6.1.4.1.6296.101.16.53.1.1.15 | ScalarsleMplsRouterRsvpInfoHelloTimeOut | read-only | current | The object will show rsvp hello time out |
| 1.3.6.1.4.1.6296.101.16.53.1.1.16 | ScalarsleMplsRouterRsvpInfoKeepMultiplier | read-only | current | The object will show rsvp keep multiplier |
| 1.3.6.1.4.1.6296.101.16.53.1.1.17 | ScalarsleMplsRouterRsvpInfoLocalProtection | read-only | current | The object will show rsvp local protection is enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.18 | ScalarsleMplsRouterRsvpInfoLoopDetection | read-only | current | The object will show rsvp loop detection enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.19 | ScalarsleMplsRouterRsvpInfoMesgAck | read-only | current | The object will show rsvp message ack is enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.20 | ScalarsleMplsRouterRsvpInfoNeighbourType | read-only | current | The object will show rsvp ack wait time out |
| 1.3.6.1.4.1.6296.101.16.53.1.1.21 | ScalarsleMplsRouterRsvpInfoNeighbourAddr | read-only | current | The object will show rsvp neighbour address |
| 1.3.6.1.4.1.6296.101.16.53.1.1.22 | ScalarsleMplsRouterRsvpInfoRefreshPathParsing | read-only | current | The object will show rsvp refresh path parsing enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.23 | ScalarsleMplsRouterRsvpInfoRefreshResvParsing | read-only | current | The object will show rsvp refresh reservation parsing enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.24 | ScalarsleMplsRouterRsvpInfoRefreshReduction | read-only | current | The object will show rsvp Refresh reduction enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.25 | ScalarsleMplsRouterRsvpInfoRefreshTime | read-only | current | The object will show rsvp refresh timer value |
| 1.3.6.1.4.1.6296.101.16.53.1.1.26 | ScalarsleMplsRouterRsvpInfoNotification | read-only | current | The object will show rsvp notification is enable or disabled |
| 1.3.6.1.4.1.6296.101.16.53.1.1.27 | ScalarsleMplsRouterRsvpInfoPreProgSuggLabel | read-only | current | The object will show rsvp pre programmed suggestion label is enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.1.1.28 | ScalarsleMplsRouterRsvpInfoOverRideDiffServ | read-only | current | The object will show rsvp DiffServ over ried is enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.1.1.29 | ScalarsleMplsRouterRsvpInfoPhp | read-only | current | The object will show rsvp penaltimate hopping is enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.1.1.30 | ScalarsleMplsRouterRsvpInfoSampleInterval | read-only | current | The object will show rsvp auto bandwidth sample interval |
| 1.3.6.1.4.1.6296.101.16.53.1.2 | NodesleMplsRouterRsvpControlScalars | |||
| 1.3.6.1.4.1.6296.101.16.53.1.2.1 | ScalarsleMplsRouterRsvpControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsRouterRsvpTableControltable. For each read-write column of sleMplsRouterRs… |
| 1.3.6.1.4.1.6296.101.16.53.1.2.1 | NodesleMplsRouterRsvpTableControl | |||
| 1.3.6.1.4.1.6296.101.16.53.1.2.2 | ScalarsleMplsRouterRsvpControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.53.1.2.3 | ScalarsleMplsRouterRsvpControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.53.1.2.4 | ScalarsleMplsRouterRsvpControlTimeStamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.53.1.2.5 | ScalarsleMplsRouterRsvpControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.53.1.2.6 | ScalarsleMplsRouteRsvpControl | read-write | current | This object is used to enable or disable router rsvp |
| 1.3.6.1.4.1.6296.101.16.53.1.2.7 | ScalarsleMplsRouterRsvpControlAckWaitTimeOut | read-write | current | This object is used to enable or disable rsvp Ack Wait time out |
| 1.3.6.1.4.1.6296.101.16.53.1.2.8 | ScalarsleMplsRouterRsvpControlAckWaitTimeOutValue | read-write | current | This object is used to enable or disable rsvp Ack wait time out value |
| 1.3.6.1.4.1.6296.101.16.53.1.2.9 | ScalarsleMplsRouterRsvpControlBundleSend | read-write | current | This object is used to enable or disable rsvp Bundle send |
| 1.3.6.1.4.1.6296.101.16.53.1.2.10 | ScalarsleMplsRouterRsvpControlCspf | read-write | current | This object is used to enable or disable rsvp csfp |
| 1.3.6.1.4.1.6296.101.16.53.1.2.11 | ScalarsleMplsRouterRsvpControlDetuorId | read-write | current | This object is used to enable or disable rsvp detour id either path or sender template |
| 1.3.6.1.4.1.6296.101.16.53.1.2.12 | ScalarsleMplsRouterRsvpControlExplicitNull | read-write | current | This object is used to enable or disable rsvp explicit null |
| 1.3.6.1.4.1.6296.101.16.53.1.2.13 | ScalarsleMplsRouterRsvpControlFromType | read-write | current | This object is used to configure from type |
| 1.3.6.1.4.1.6296.101.16.53.1.2.14 | ScalarsleMplsRouterRsvpControlFromAddress | read-write | current | This object is used to configure from address i.e., ingress id or router id |
| 1.3.6.1.4.1.6296.101.16.53.1.2.15 | ScalarsleMplsRouterRsvpControlHelloOptions | read-write | current | This object is used to configure rsvp hello interval or receipt or time out |
| 1.3.6.1.4.1.6296.101.16.53.1.2.16 | ScalarsleMplsRouterRsvpControlHelloValue | read-write | current | This object is used to configure rsvp hello time out value or hello interval value |
| 1.3.6.1.4.1.6296.101.16.53.1.2.17 | ScalarsleMplsRouterRsvpControlGraceRestart | read-write | current | This object is used to configure graceful restart enable or disable or recovery time or restart time |
| 1.3.6.1.4.1.6296.101.16.53.1.2.18 | ScalarsleMplsRouterRsvpControlGraceTimer | read-write | current | This object is used to configure rsvp graceful timer value for recovery timer or restart time |
| 1.3.6.1.4.1.6296.101.16.53.1.2.19 | ScalarsleMplsRouterRsvpControlKeepMultiplier | read-write | current | This object is used to configure rsvp keep multiplier |
| 1.3.6.1.4.1.6296.101.16.53.1.2.20 | ScalarsleMplsRouterRsvpControlLocalProtection | read-write | current | This object is used to configure rsvp local protection enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.1.2.21 | ScalarsleMplsRouterRsvpControlLoopDetection | read-write | current | This object is used to configure rsvp loop detection |
| 1.3.6.1.4.1.6296.101.16.53.1.2.22 | ScalarsleMplsRouterRsvpIControlMesgAck | read-write | current | This object is used to configure message acknowldgement |
| 1.3.6.1.4.1.6296.101.16.53.1.2.23 | ScalarsleMplsRouterRsvpControlNeighbourType | read-write | current | This object is used to configure neighbour address type |
| 1.3.6.1.4.1.6296.101.16.53.1.2.24 | ScalarsleMplsRouterRsvpControlNeighbourAddr | read-write | current | This object is used to configure neigbhour address |
| 1.3.6.1.4.1.6296.101.16.53.1.2.25 | ScalarsleMplsRouterRsvpControlRefreshOptions | read-write | current | This object is used to configure refresh options which can configure refresh path parsing, refresh redction, refresh reservation parsing and refresh timer |
| 1.3.6.1.4.1.6296.101.16.53.1.2.26 | ScalarsleMplsRouterRsvpControlRefreshTimeValue | read-write | current | This object is used to configure refresh timer value |
| 1.3.6.1.4.1.6296.101.16.53.1.2.27 | ScalarsleMplsRouterRsvpControlNotification | read-write | current | This object is used to configure notification enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.1.2.28 | ScalarsleMplsRouterRsvpControlPreProgSuggLabel | read-write | current | This object is used to configure pre programmable suggestion label |
| 1.3.6.1.4.1.6296.101.16.53.1.2.29 | ScalarsleMplsRouterRsvpControlOverRideDiffServ | read-write | current | This object is used to over ride the diff serv |
| 1.3.6.1.4.1.6296.101.16.53.1.2.30 | ScalarsleMplsRouterRsvpControlPhp | read-write | current | This object is used to configure penultimate hop |
| 1.3.6.1.4.1.6296.101.16.53.1.2.31 | ScalarsleMplsRouterRsvpControlSampleInterval | read-write | current | This object is used to configure sample interval |
| 1.3.6.1.4.1.6296.101.16.53.2 | NodesleMplsRouterRsvpInterfaceObjects | |||
| 1.3.6.1.4.1.6296.101.16.53.2.1 | TablesleMplsRouterRsvpInterfaceInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1 | RowsleMplsRouterRsvpInterfaceInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.1 | ColumnsleMplsRouterRsvpInterfaceInfoIndex | not-accessible | current | Uniquely identifies this row. |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.2 | ColumnsleMplsRouterRsvpInterfaceInfoAckWaitTimeOut | read-only | current | This object will show the Aack wait time out enable or disable for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.3 | ColumnsleMplsRouterRsvpInterfaceInfoAckWaitTimeOutValue | read-only | current | This object will show the Aack wait time out value for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.4 | ColumnsleMplsRouterRsvpInterfaceInfoHelloInterval | read-only | current | This object will show the hello interval value for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.5 | ColumnsleMplsRouterRsvpInterfaceInfoHelloReciept | read-only | current | This object will show the hello reciept enable or disable for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.6 | ColumnsleMplsRouterRsvpInterfaceInfoHelloTimeout | read-only | current | This object will show the hello time out value for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.7 | ColumnsleMplsRouterRsvpInterfaceInfoKeepMulti | read-only | current | This object will show the keep multiplier value for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.8 | ColumnsleMplsRouterRsvpInterfaceInfoMsgAck | read-only | current | This object will show the message ack enable or disable for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.9 | ColumnsleMplsRouterRsvpInterfaceInfoNonIANAHello | read-only | current | This object will show the non IANA hello enable or disable for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.10 | ColumnsleMplsRouterRsvpInterfaceInfoRefreshReduction | read-only | current | This object will show the refresh reduction enable or disable for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.11 | ColumnsleMplsRouterRsvpInterfaceInfoRefreshTime | read-only | current | This object will show the refresh timer value for the rsvp enabled inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.1.1.12 | ColumnsleMplsRouterRsvpInterfaceInfoEnable | read-only | current | This object will show the rsvp enabled or disabled on the inteface |
| 1.3.6.1.4.1.6296.101.16.53.2.2 | NodesleMplsRouterRsvpInterfaceTableControl | |||
| 1.3.6.1.4.1.6296.101.16.53.2.2.1 | ScalarsleMplsRouterRsvpInterfaceControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the Tunnel table. For each read-write column of Tunnel table, a Set Operation control… |
| 1.3.6.1.4.1.6296.101.16.53.2.2.2 | ScalarsleMplsRouterRsvpInterfaceControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.53.2.2.3 | ScalarsleMplsRouterRsvpInterfaceControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.53.2.2.4 | ScalarsleMplsRouterRsvpInterfaceControlTimeStamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.53.2.2.5 | ScalarsleMplsRouterRsvpInterfaceControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.53.2.2.6 | ScalarsleMplsRouterRsvpInterfaceControlIndex | read-write | current | Uniquely identifies this row. |
| 1.3.6.1.4.1.6296.101.16.53.2.2.7 | ScalarsleMplsRouterRsvpInterfaceControlAckWaitTimeOut | read-write | current | this object is used to configure the ack wait time out enable or disable for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.8 | ScalarsleMplsRouterRsvpInterfaceControlAckWaitTimeOutValue | read-write | current | this object is used to configure the ack wait time out value for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.9 | ScalarsleMplsRouterRsvpInterfaceControlHelloOptions | read-write | current | this object is used to configure the hello optins for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.10 | ScalarsleMplsRouterRsvpInterfaceControlHelloValue | read-write | current | this object is used to configure the hello value for the for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.11 | ScalarsleMplsRouterRsvpInterfaceControlKeepMulti | read-write | current | this object is used to configure the keep multiplier for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.12 | ScalarsleMplsRouterRsvpInterfaceControlMsgAck | read-write | current | this object is used to configure the message ack or disable for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.13 | ScalarsleMplsRouterRsvpInterfaceControlNonIANAHello | read-write | current | this object is used to configure the Non IANA hello enable or disable for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.14 | ScalarsleMplsRouterRsvpInterfaceControlRefreshOptions | read-write | current | this object is used to configure the refresh options for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.15 | ScalarsleMplsRouterRsvpInterfaceControlRefreshTime | read-write | current | this object is used to configure the refresh timer values for the rsvp enabled interface |
| 1.3.6.1.4.1.6296.101.16.53.2.2.16 | ScalarsleMplsRouterRsvpInterfaceControlEnable | read-write | current | this object is used to configure the rsvp enabled or disable for the interface |
| 1.3.6.1.4.1.6296.101.16.53.3 | NodesleMplsRsvpTeTunnelObjects | |||
| 1.3.6.1.4.1.6296.101.16.53.3.1 | TablesleMplsRsvpTeTunnelInfoTable | not-accessible | current | The MplsRsvpTeTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note … |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1 | RowsleMplsRsvpTeTunnelInfoEntry | not-accessible | current | An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling pr… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.1 | ColumnsleMplsRsvpTeTunnelIndex | not-accessible | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by re… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.2 | ColumnsleMplsRsvpTeTunnelInstance | not-accessible | current | Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.3 | ColumnsleMplsRsvpTeTunnelFrom | not-accessible | current | Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender … |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.4 | ColumnsleMplsRsvpTeTunnelTo | not-accessible | current | Identity of the egress LSR associated with this tunnel instance. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.5 | ColumnsleMplsRsvpTeTunnelName | read-only | current | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If MplsRsvpTeTunnelIsIf is set to true then … |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.6 | ColumnsleMplsRsvpTeTunnelDescr | read-only | current | A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signa… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.7 | ColumnsleMplsRsvpTeTunnelOwner | read-only | current | Denotes the entity that created and is responsible for managing this tunnel. This column is automatically filled by the agent on creation of a row. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.8 | ColumnsleMplsRsvpTeTunnelSetupPrio | read-only | current | Indicates the setup priority of this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.9 | ColumnsleMplsRsvpTeTunnelHoldingPrio | read-only | current | Indicates the holding priority for this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.10 | ColumnsleMplsRsvpTeTunnelLocalProtectInUse | read-only | current | Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over). |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.11 | ColumnsleMplsRsvpTeTunnelPrimaryInstance | read-only | current | Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be … |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.12 | ColumnsleMplsRsvpTeTunnelPathName | read-only | current | Index into the MplsRsvpTeTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tun… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.13 | ColumnsleMplsRsvpTeTunnelPathInUse | read-only | current | This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into MplsRsvpTeTunnelHopTable. This path may no… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.14 | ColumnsleMplsRsvpTeTunnelTotalUpTime | read-only | current | This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.15 | ColumnsleMplsRsvpTeTunnelInstanceUpTime | read-only | current | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.16 | ColumnsleMplsRsvpTeTunnelPrimaryUpTime | read-only | current | Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in MplsRsvpTeTunnelPrimaryInstance. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.17 | ColumnsleMplsRsvpTeTunnelPathChanges | read-only | current | Specifies the number of times the actual path for this tunnel instance has changed. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.18 | ColumnsleMplsRsvpTeTunnelLastPathChange | read-only | current | Specifies the time since the last change to the actual path for this tunnel instance. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.19 | ColumnsleMplsRsvpTeTunnelCreationTime | read-only | current | Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of MplsRsvpTeTunnelOperStatus was first se… |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.20 | ColumnsleMplsRsvpTeTunnelStateTransitions | read-only | current | Specifies the number of times the state (MplsRsvpTeTunnelOperStatus) of this tunnel instance has changed. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.21 | ColumnsleMplsRsvpTeTunnelOperStatus | read-only | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.22 | ColumnsleMplsRsvpTeTunnelOptions | read-only | current | This object will show rsvp-te trunk or bypass tunnels |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.23 | ColumnsleMplsRsvpTeTunnelInstanceOptions | read-only | current | This object will showprimary or secondary configrations |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.24 | ColumnsleMplsRsvpTeTunnelRecordRoute | read-only | current | This object will show record route enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.25 | ColumnsleMplsRsvpTeTunnelLabelRecord | read-only | current | This object will show label record enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.26 | ColumnsleMplsRsvpTeTunnelReUseRecordRoute | read-only | current | This object will show re use of record route enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.27 | ColumnsleMplsRsvpTeTunnelExtendedId | read-only | current | This object will show the extended tunnel id |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.28 | ColumnsleMplsRsvpTeTunnelLspMetric | read-only | current | This object will show lsp metric absolute or relative |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.29 | ColumnsleMplsRsvpTeTunnelLspMetricValue | read-only | current | Set relative metric <-65535-0> Set relative metric <1-65535> |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.30 | ColumnsleMplsRsvpTeTunnelUpdateType | read-only | current | This object will show the update type for the rsvp-te |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.31 | ColumnsleMplsRsvpTeTunnelRetryTimer | read-only | current | This object will show retry timer for the tunnel |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.32 | ColumnsleMplsRsvpTeTunnelRetryLimit | read-only | current | This object will show retry limit for the tunnel |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.33 | ColumnsleMplsRsvpTeTunnelCspf | read-only | current | This object will show CSPF enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.34 | ColumnsleMplsRsvpTeTunnelCspfRetryLimit | read-only | current | This object will show cspf retry limit |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.35 | ColumnsleMplsRsvpTeTunnelCspfRetryTimer | read-only | current | This object will show cspf retry timer |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.36 | ColumnsleMplsRsvpTeTunnelHopLimit | read-only | current | This object will show the hop limit for the rsvp tunnel |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.37 | ColumnsleMplsRsvpTeTunnelExplicitLabelOptions | read-only | current | This object will show explicit label options |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.38 | ColumnsleMplsRsvpTeTunnelExplicitLabel | read-only | current | This object will show rsvp explicit label value |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.39 | ColumnsleMplsRsvpTeTunnelClassToExpBit | read-only | current | This object will show class to exp bit ie., Diffserv class alias, eg: be, ef, af11 etc |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.40 | ColumnsleMplsRsvpTeTunnelElspPreConfigure | read-only | current | This object will show the Elsp pre configure enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.41 | ColumnsleMplsRsvpTeTunnelElspSignaled | read-only | current | This object will show the elsp signaled enabled or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.42 | ColumnsleMplsRsvpTeTunnelElspSignaledClass | read-only | current | This object will show the llsp eg: be, ef, af11 etc |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.43 | ColumnsleMplsRsvpTeTunnelBandWidth | read-only | current | This object will show the bandwidth reserved for the tunnel |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.44 | ColumnsleMplsRsvpTeTunnelIgpShortcut | read-only | current | This object will show the IGP short cut enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.45 | ColumnsleMplsRsvpTeTunnelInLabel | read-only | current | This object will show the in label for the rsvp trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.46 | ColumnsleMplsRsvpTeTunnelOutLabel | read-only | current | This object will show the out label for the rsvp trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.47 | ColumnsleMplsRsvpTeTunnelFrrNodeProtection | read-only | current | This object will show the Fast re route for node protection is enabled or disabled |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.48 | ColumnsleMplsRsvpTeTunnelFrrProtection | read-only | current | This object will show the fast re route for protection of one to one and facility or disabled |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.49 | ColumnsleMplsRsvpTeTunnelMapRoutes | read-only | current | This object will show the map routes for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.50 | ColumnsleMplsRsvpTeTunnelMiniBandwidth | read-only | current | This object will show the Minimum Bandwidth |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.51 | ColumnsleMplsRsvpTeTunnelMaxBandwidth | read-only | current | This object will show the Maximum Bandwidth |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.52 | ColumnsleMplsRsvpTeTunnelPrimaryConfBandwidth | read-only | current | This object will show the primary configured bandwidth |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.53 | ColumnsleMplsRsvpTeTunnelAdjustThreashold | read-only | current | This object will show the Adjust Threashold |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.54 | ColumnsleMplsRsvpTeTunnelAdjustInterval | read-only | current | This object will show the Adjust Interval |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.55 | ColumnsleMplsRsvpTeTunnelOverFlowLimit | read-only | current | This object will show the Over Flow Limit |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.56 | ColumnsleMplsRsvpTeTunnelUnderFlowLimit | read-only | current | This object will show the Under Flow Limit |
| 1.3.6.1.4.1.6296.101.16.53.3.1.1.57 | ColumnsleMplsRsvpTeTunnelAutoBandwidth | read-only | current | This object will show the Auto Bandwidth enable or disable |
| 1.3.6.1.4.1.6296.101.16.53.3.2 | NodesleMplsRsvpTeTunnelTableControl | |||
| 1.3.6.1.4.1.6296.101.16.53.3.2.1 | ScalarsleMplsRsvpTeTunnelControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the Tunnel table. For each read-write column of Tunnel table, a Set Operation control… |
| 1.3.6.1.4.1.6296.101.16.53.3.2.2 | ScalarsleMplsRsvpTeTunnelControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.3 | ScalarsleMplsRsvpTeTunnelControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.4 | ScalarsleMplsRsvpTeTunnelControlTimeStamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.5 | ScalarsleMplsRsvpTeTunnelControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.6 | ScalarsleMplsRsvpTeTunnelControlName | read-write | current | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If MplsRsvpTeTunnelIsIf is set to true then … |
| 1.3.6.1.4.1.6296.101.16.53.3.2.7 | ScalarsleMplsRsvpTeTunnelControlDescr | read-write | current | A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signa… |
| 1.3.6.1.4.1.6296.101.16.53.3.2.8 | ScalarsleMplsRsvpTeTunnelControlOptions | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.53.3.2.9 | ScalarsleMplsRsvpTeTunnelControlFrom | read-write | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.10 | ScalarsleMplsRsvpTeTunnelControlTo | read-write | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.11 | ScalarsleMplsRsvpTeTunnelControlInstanceOptions | read-write | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.12 | ScalarsleMplsRsvpTeTunnelControlExtendedId | read-write | current | this object is used to configure the extended tunnel id for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.13 | ScalarsleMplsRsvpTeTunnelControlLspMetric | read-write | current | this object is used to configure the absolute or rleative lsp metric for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.14 | ScalarsleMplsRsvpTeTunnelControlLspMetricValue | read-write | current | Set relative metric <-65535-0> Set relative metric <1-65535> |
| 1.3.6.1.4.1.6296.101.16.53.3.2.15 | ScalarsleMplsRsvpTeTunnelControlUpdateType | read-write | current | Set relative metric <-65535-0> Set relative metric <1-65535> |
| 1.3.6.1.4.1.6296.101.16.53.3.2.16 | ScalarsleMplsRsvpTeTunnelControlSetupPrio | read-write | current | Indicates the setup priority of this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.17 | ScalarsleMplsRsvpTeTunnelControlHoldingPrio | read-write | current | Indicates the holding priority for this tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.3.2.18 | ScalarsleMplsRsvpTeTunnelControlSessionAttributes | read-write | current | this object is used to configure options for the particular session either to record reoute, label record, local protection, re use of the record route and igp… |
| 1.3.6.1.4.1.6296.101.16.53.3.2.19 | ScalarsleMplsRsvpTeTunnelControlHopPathName | read-write | current | Index into the MplsRsvpTeTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tun… |
| 1.3.6.1.4.1.6296.101.16.53.3.2.20 | ScalarsleMplsRsvpTeTunnelControlRetryTimer | read-write | current | this object is used to configure the retry timer value for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.21 | ScalarsleMplsRsvpTeTunnelControlRetryLimit | read-write | current | this object is used to configure the retry limit value for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.22 | ScalarsleMplsRsvpTeTunnelControlCspf | read-write | current | this object is used to configure the cspf enable or disable for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.23 | ScalarsleMplsRsvpTeTunnelControlCspfRetryLimit | read-write | current | this object is used to configure the cspf retry limit for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.24 | ScalarsleMplsRsvpTeTunnelControlCspfRetryTimer | read-write | current | this object is used to configure the cspf retry timer value for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.25 | ScalarsleMplsRsvpTeTunnelControlHopLimit | read-write | current | this object is used to configure the hop limit for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.26 | ScalarsleMplsRsvpTeTunnelControlExplicitLabelOptions | read-write | current | this object is used to configure the explicit label options for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.27 | ScalarsleMplsRsvpTeTunnelControlExplicitLabel | read-write | current | this object is used to configure the explicit label value for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.28 | ScalarsleMplsRsvpTeTunnelControlElspOptions | read-write | current | this object is used to configure the ELSP options for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.29 | ScalarsleMplsRsvpTeTunnelControlElspValues | read-write | current | this object is used to configure the elsp value for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.30 | ScalarsleMplsRsvpTeTunnelControlExpBitValue | read-write | current | this object is used to configure the exp bit value for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.31 | ScalarsleMplsRsvpTeTunnelControlBandWidth | read-write | current | this object is used to configure the tunnel bandwidth for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.32 | ScalarsleMplsRsvpTeTunnelControlFrrNodeProtection | read-write | current | this object is used to configure fast re route of node protection |
| 1.3.6.1.4.1.6296.101.16.53.3.2.33 | ScalarsleMplsRsvpTeTunnelControlFrrProtection | read-write | current | this object is used to configure fast re route of protection of one to one and facilty |
| 1.3.6.1.4.1.6296.101.16.53.3.2.34 | ScalarsleMplsRsvpTeTunnelControlMapRouteType | read-write | current | this object is used to configure the map route type for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.35 | ScalarsleMplsRsvpTeTunnelControlMapRoute | read-write | current | this object is used to configure the map route for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.36 | ScalarsleMplsRsvpTeTunnelControlMapRoutePrefix | read-write | current | this object is used to configure the map route prefix/mask for the trunk |
| 1.3.6.1.4.1.6296.101.16.53.3.2.37 | ScalarsleMplsRsvpTeTunnelControlAutoBandwidthOptions | read-write | current | this object is used to configure the bandwidth options |
| 1.3.6.1.4.1.6296.101.16.53.3.2.38 | ScalarsleMplsRsvpTeTunnelControlAutoBandwidthValues | read-write | current | this object is used to configure the values to the related options minimumBandwidth <1-10000000000 bits> (usable units : k, m, g), maximumBandwidth <1-10000000… |
| 1.3.6.1.4.1.6296.101.16.53.4 | NodesleMplsRsvpTeTunnelPathObjects | |||
| 1.3.6.1.4.1.6296.101.16.53.4.1 | TablesleMplsRsvpTeTunnelPathInfoTable | not-accessible | current | The MplsRsvpTeTunnelHopTable is used to indicate the hops, strict or loose, for an instance of an MPLS tunnel defined in MplsRsvpTeTunnelTable, when it is esta… |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1 | RowsleMplsRsvpTeTunnelPathInfoEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signalling protocol. |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.1 | ColumnsleMplsRsvpTeTunnelPathIndex | not-accessible | current | Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option. |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.2 | ColumnsleMplsRsvpTeTunnelPathHopIndex | not-accessible | current | Tertiary index into this table identifying a particular hop. |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.3 | ColumnsleMplsRsvpTeTunnelPathNextHopAddrType | read-only | current | The Hop Address Type of this tunnel hop. The value of this object cannot be changed if the value of the corresponding MplsRsvpTeTunnelHopRowStatus object is 'a… |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.4 | ColumnsleMplsRsvpTeTunnelPathNextHopIpAddr | read-only | current | The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding MplsRsvpTeTunnelHopAddrType. The value of … |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.5 | ColumnsleMplsRsvpTeTunnelPathNextHopPrefixLen | read-only | current | If MplsRsvpTeTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object MplsRsvpTeT… |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.6 | ColumnsleMplsRsvpTeTunnelPathHopType | read-only | current | Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the MplsRsvpTeTunnelHopInclude object is set… |
| 1.3.6.1.4.1.6296.101.16.53.4.1.1.7 | ColumnsleMplsRsvpTeTunnelPathHopName | read-only | current | The description of this series of hops as they relate to the specified path option. The value of this object SHOULD be the same for each hop in the series that… |
| 1.3.6.1.4.1.6296.101.16.53.4.2 | NodesleMplsRsvpTeTunnelPathTableControl | |||
| 1.3.6.1.4.1.6296.101.16.53.4.2.1 | ScalarsleMplsRsvpTeTunnelPathControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the Tunnel table. For each read-write column of Tunnel table, a Set Operation control… |
| 1.3.6.1.4.1.6296.101.16.53.4.2.2 | ScalarsleMplsRsvpTeTunnelPathControlStatus | read-write | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.53.4.2.3 | ScalarsleMplsRsvpTeTunnelPathControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.53.4.2.4 | ScalarsleMplsRsvpTeTunnelPathControlTimeStamp | read-write | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.53.4.2.5 | ScalarsleMplsRsvpTeTunnelPathControlReqResult | read-write | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.53.4.2.6 | ScalarsleMplsRsvpTeTunnelPathControlPathName | read-write | current | The description of this series of hops as they relate to the specified path option. The value of this object SHOULD be the same for each hop in the series that… |
| 1.3.6.1.4.1.6296.101.16.53.4.2.7 | ScalarsleMplsRsvpTeTunnelPathNextHopControlAddrType | read-write | current | The Hop Address Type of this tunnel hop. The value of this object cannot be changed if the value of the corresponding MplsRsvpTeTunnelHopRowStatus object is 'a… |
| 1.3.6.1.4.1.6296.101.16.53.4.2.8 | ScalarsleMplsRsvpTeTunnelPathNextHopControlIpAddr | read-write | current | The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding MplsRsvpTeTunnelHopAddrType. The value of … |
| 1.3.6.1.4.1.6296.101.16.53.4.2.9 | ScalarsleMplsRsvpTeTunnelPathNextHopControlIpPrefixLen | read-write | current | If MplsRsvpTeTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object MplsRsvpTeT… |
| 1.3.6.1.4.1.6296.101.16.53.4.2.10 | ScalarsleMplsRsvpTeTunnelPathControlType | read-write | current | Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the MplsRsvpTeTunnelHopInclude object is set… |
| 1.3.6.1.4.1.6296.101.16.53.5 | NodesleMplsRsvpTeTunnelPerfObjects | |||
| 1.3.6.1.4.1.6296.101.16.53.5.1 | TablesleMplsRsvpTeTunnelPerfInfoTable | not-accessible | current | This table provides per-tunnel instance MPLS performance information. |
| 1.3.6.1.4.1.6296.101.16.53.5.1.1 | RowsleMplsRsvpTeTunnelPerfInfoEntry | not-accessible | current | An entry in this table is created by the LSR for every tunnel. Its is an extension to MplsRsvpTeTunnelEntry. |
| 1.3.6.1.4.1.6296.101.16.53.5.1.1.1 | ColumnsleMplsRsvpTeTunnelPerfPackets | read-only | current | Number of packets forwarded by the tunnel. This object should represents the 32-bit value of the least significant part of the 64-bit value if both MplsRsvpTeT… |
| 1.3.6.1.4.1.6296.101.16.53.5.1.1.2 | ColumnsleMplsRsvpTeTunnelPerfHCPackets | read-only | current | High capacity counter for number of packets forwarded by the tunnel. |
| 1.3.6.1.4.1.6296.101.16.53.5.1.1.3 | ColumnsleMplsRsvpTeTunnelPerfErrors | read-only | current | Number of packets dropped because of errors or for other reasons. |
| 1.3.6.1.4.1.6296.101.16.53.5.1.1.4 | ColumnsleMplsRsvpTeTunnelPerfBytes | read-only | current | Number of bytes forwarded by the tunnel. This object should represents the 32-bit value of the least significant part of the 64-bit value if both MplsRsvpTeTun… |
| 1.3.6.1.4.1.6296.101.16.53.5.1.1.5 | ColumnsleMplsRsvpTeTunnelPerfHCBytes | read-only | current | High capacity counter for number of bytes forwarded by the tunnel. |