SUPERMICRO-DCB-MIB
128 objects
The proprietary extension MIB module for DCB.
Imported Objects
| IF-MIB | InterfaceIndex |
| LLDP-EXT-DOT1-DCBX-MIB MISSING | lldpXdot1dcbxAdminApplicationPriorityAppEntry |
| LLDP-V2-MIB | lldpV2LocPortIfIndex lldpV2PortConfigEntry lldpV2RemIndex lldpV2RemLocalDestMACAddress lldpV2RemLocalIfIndex lldpV2RemTimeMark |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.22 | IdentityfsDcbMIB | The proprietary extension MIB module for DCB. | ||
| 1.3.6.1.4.1.10876.101.2.22.1 | NodefsDcbSystem | |||
| 1.3.6.1.4.1.10876.101.2.22.1.1 | ScalarfsDcbPfcMinThreshold | read-write | current | The minimum PFC(Priority Based Flow Control) threshold for the switch. This Object indicates the minimum Receive queue buffer count. The minimum and maximum va… |
| 1.3.6.1.4.1.10876.101.2.22.1.2 | ScalarfsDcbPfcMaxThreshold | read-write | current | The maximum PFC(Priority Based Flow Control)threshold for the switch. This Object indicates the maximum Receive queue buffer count. The minimum and maximum val… |
| 1.3.6.1.4.1.10876.101.2.22.1.3 | ScalarfsDcbMaxPfcProfiles | read-only | current | The maximum number of PFC(Priority Based Flow Control)profiles supported by the device. A PFC profile is a bitmap, containing the status of PFC for all the pri… |
| 1.3.6.1.4.1.10876.101.2.22.2 | NodefsDcbObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.2.1 | TablefsDcbPortTable | not-accessible | obsolete | Port table contains the DCB features (Enhanced Transmission Selection/Priortiy Based Flow Control) status (enabled or disabled). |
| 1.3.6.1.4.1.10876.101.2.22.2.1.1 | RowfsDcbPortEntry | not-accessible | obsolete | An entry containing DCB control parameters for a particular port. |
| 1.3.6.1.4.1.10876.101.2.22.2.1.1.1 | ColumnfsDcbPortNumber | not-accessible | obsolete | This indicates the interface identifier for which the Dcb configuration is applied. |
| 1.3.6.1.4.1.10876.101.2.22.2.1.1.2 | ColumnfsDcbETSAdminStatus | read-write | obsolete | This object is used to enable or disable ETS feature on the given port. If set to 'enabled(1)', ETS feature will be enabled on this port. If set to 'disabled(2… |
| 1.3.6.1.4.1.10876.101.2.22.2.1.1.3 | ColumnfsDcbPFCAdminStatus | read-write | obsolete | This object is used to enable or disable PFC feature on the given port. If set to 'enabled(1)', PFC feature will be enabled on this port. If set to 'disabled(2… |
| 1.3.6.1.4.1.10876.101.2.22.2.1.1.4 | ColumnfsDcbRowStatus | read-write | obsolete | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.10876.101.2.22.3 | NodefsDcbApplicationObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.3.1 | NodefsDCBXObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.3.1.1 | NodefsDCBXScalars | |||
| 1.3.6.1.4.1.10876.101.2.22.3.1.1.1 | ScalarfsDcbxGlobalTraceLevel | read-write | current | This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer… |
| 1.3.6.1.4.1.10876.101.2.22.3.1.2 | TablefsDCBXPortTable | not-accessible | current | Port table contains the DCBX feature status (enabled or disabled). |
| 1.3.6.1.4.1.10876.101.2.22.3.1.2.1 | RowfsDCBXPortEntry | not-accessible | current | An entry containing DCBX control parameters for a particular port. |
| 1.3.6.1.4.1.10876.101.2.22.3.1.2.1.1 | ColumnfsDCBXPortNumber | not-accessible | current | This indicates the interface identifier for which the DCBX configuration is applied. |
| 1.3.6.1.4.1.10876.101.2.22.3.1.2.1.2 | ColumnfsDCBXAdminStatus | read-write | current | This object is used to enable or disable DCBX feature on the given port. If set to 'enabled(1)', DCBX feature will be enabled on this port. This will start the… |
| 1.3.6.1.4.1.10876.101.2.22.3.2 | NodefsETSObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.3.2.1 | NodefsETSScalars | |||
| 1.3.6.1.4.1.10876.101.2.22.3.2.1.1 | ScalarfsETSSystemControl | read-write | current | The ETS(Enhanced Transmission selection) system control status for the switch. Starts or shutdown ETS Module in the system. When set as 'start', resources requ… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.1.2 | ScalarfsETSModuleStatus | read-write | current | The ETS(Enhanced Transmission Selection) Module status for the switch. If this object is set as 'disabled', then for all the ports in which ETS has been enable… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.1.3 | ScalarfsETSClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the ETS Module: fsETSConfTxTLVCounter, fsETSConfRxTLVCounter, fsETSConfRxTLVErrors, fsETSRecoTx… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.1.4 | ScalarfsETSGlobalEnableTrap | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages for ETS feature. Each bit in this object corresponds to a particular tr… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.1.5 | ScalarfsETSGeneratedTrapCount | read-write | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2 | TablefsETSPortTable | not-accessible | current | ETS Port table contains the ETS (Enhanced Transmission Selection) features information specific to this port. An entry created in this table in the following t… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1 | RowfsETSPortEntry | not-accessible | current | An entry containing ETS control parameters and ETS information for a particular port. |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.1 | ColumnfsETSPortNumber | not-accessible | current | This indicates the interface identifier for which the ETS configuration is applied. |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.2 | ColumnfsETSAdminMode | read-write | current | This object is used to configure Admin mode for ETS feature on the given port. If set to 'auto(0)', and if ETS feature is enabled on this port then all the ope… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.3 | ColumnfsETSDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the ETS feature on the given port. If state is Off '(0)', then ETS Operational(l… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.4 | ColumnfsETSDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the ETS feature on the given port. |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.5 | ColumnfsETSClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with a Port: fsETSConfTxTLVCounter, fsETSConfRxTLVCounter, fsETSConfRxTLVErrors, fsETSRe… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.6 | ColumnfsETSConfTxTLVCounter | read-only | current | This object is used to keep track of the number of ETS configuration TLV that are transmitted from this port. This counter will be incremented every time when … |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.7 | ColumnfsETSConfRxTLVCounter | read-only | current | This object is used to keep track of the number of ETS ConfigurationTLV that are received in this port. This counter will be incremented every time when there … |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.8 | ColumnfsETSConfRxTLVErrors | read-only | current | This object is used to keep track of number of malformed ETS Conf TLVs received by ETS. This counter will be incremented every time a ETS Conf TLV is dropped b… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.9 | ColumnfsETSRecoTxTLVCounter | read-only | current | This object is used to keep track of the number of ETS Recommendation TLV that are transmitted from this port. This counter will be incremented every time when… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.10 | ColumnfsETSRecoRxTLVCounter | read-only | current | This object is used to keep track of the number of ETS Recommendation TLV that are received in this port. This counter will be incremented every time when ther… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.11 | ColumnfsETSRecoRxTLVErrors | read-only | current | This object is used to keep track of number of malformed ETS Reco TLVs received by ETS. This counter will be incremented every time a ETS Reco TLV is dropped b… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.12 | ColumnfsETSTcSuppTxTLVCounter | read-only | current | This object is used to keep track of the number of TC Supported TLV that are transmitted from this port. This counter will be incremented every time when there… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.13 | ColumnfsETSTcSuppRxTLVCounter | read-only | current | This object is used to keep track of the number of TC Supported TLV that are received in this port. This counter will be incremented every time when there is T… |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.14 | ColumnfsETSTcSuppRxTLVErrors | read-only | current | This object is used to keep track of number of malformed TC Supp TLVs received by ETS. This counter will be incremented every time a TC Supp TLV is dropped by … |
| 1.3.6.1.4.1.10876.101.2.22.3.2.2.1.15 | ColumnfsETSRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.10876.101.2.22.3.3 | NodefsPFCObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.3.3.1 | NodefsPFCScalars | |||
| 1.3.6.1.4.1.10876.101.2.22.3.3.1.1 | ScalarfsPFCSystemControl | read-write | current | The PFC(Priority Based Flow Control) system control status for the switch. Starts or shutdown PFC Module in the system. When set as 'start', resources required… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.1.2 | ScalarfsPFCModuleStatus | read-write | current | The PFC(Priority Based Flow Control) Module status for the switch. If this object is set as 'disabled', then for all the ports in which PFC has been enabled, w… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.1.3 | ScalarfsPFCClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the PFC Module: fsPFCTxTLVCounter, fsPFCRxTLVCounter, fsPFCRxTLVErrors. Setting this object to … |
| 1.3.6.1.4.1.10876.101.2.22.3.3.1.4 | ScalarfsPFCGlobalEnableTrap | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages for PFC feature. Each bit in this object corresponds to a particular tr… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.1.5 | ScalarfsPFCGeneratedTrapCount | read-write | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2 | TablefsPFCPortTable | not-accessible | current | PFC Port table contains the PFC (Priortiy Based Flow Control) features information specific to this port. An entry created in the port table populates the entr… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1 | RowfsPFCPortEntry | not-accessible | current | An entry containing PFC control parameters and PFC information for a particular port. |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.1 | ColumnfsPFCPortNumber | not-accessible | current | This indicates the interface identifier for which the PFC configuration is applied. |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.2 | ColumnfsPFCAdminMode | read-write | current | This object is used to configure Admin mode for PFC feature on the given port. If set to 'auto(0)', and if PFC feature is enabled on this port then all the ope… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.3 | ColumnfsPFCDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the PFC feature on the given port. If state is Off '(1)', then PFC Operational(l… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.4 | ColumnfsPFCDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the PFC feature on the given port. |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.5 | ColumnfsPFCClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with a Port: fsPFCTxTLVCounter, fsPFCRxTLVCounter, fsPFCRxTLVErrors. Setting this object… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.6 | ColumnfsPFCTxTLVCounter | read-only | current | This object is used to keep track of the number of PFC TLV that are transmitted from this port. This counter will be incremented every time when there is PFC T… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.7 | ColumnfsPFCRxTLVCounter | read-only | current | This object is used to keep track of the number of PFC TLV that are received in this port. This counter will be incremented every time when there is PFC TLV is… |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.8 | ColumnfsPFCRxTLVErrors | read-only | current | This object is used to keep track of number of malformed TLVs received by PFC. This counter will be incremented every time a PFC-TLV is dropped by PFC. |
| 1.3.6.1.4.1.10876.101.2.22.3.3.2.1.9 | ColumnfsPFCRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.10876.101.2.22.3.4 | NodefsAppPriObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.3.4.1 | NodefsAppPriScalars | |||
| 1.3.6.1.4.1.10876.101.2.22.3.4.1.1 | ScalarfsAppPriSystemControl | read-write | current | The application priority system control status for the switch which starts or shuts down the application priority module in the system. When set as 'start', re… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.1.2 | ScalarfsAppPriModuleStatus | read-write | current | The application priority Module status for the switch. When this object is set as 'disabled', the application priority feature is disabled in the system(hardwa… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.1.3 | ScalarfsAppPriClearCounters | read-write | current | This object when set to TRUE, clears the following counters for the application prioirty module and resets its value to FALSE: fsAppPriTxTLVCounter, fsAppPriRx… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.1.4 | ScalarfsAppPriGlobalEnableTrap | read-write | current | This object is used to enable or disable the transmission of TRAP notification messages for Application Priority feature. The user has to enter the correspondi… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.1.5 | ScalarfsAppPriGeneratedTrapCount | read-write | current | This object indicates the number of Traps sent. This counter will be incremented every time when there is any trap sent |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2 | TablefsAppPriPortTable | not-accessible | current | Application Priority Port table contains the application priority feature's information specific to this port. An entry created in the port table populates the… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1 | RowfsAppPriPortEntry | not-accessible | current | An entry containing application priority control parameters and application priority information for a particular port. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.1 | ColumnfsAppPriPortNumber | not-accessible | current | This indicates the interface identifier for which the application priority configuration is applied. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.2 | ColumnfsAppPriAdminMode | read-write | current | This object is used to configure the admin mode for application priority feature on the given port. - If this object is configured as 'auto(0)' on a port then … |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.3 | ColumnfsAppPriDcbxOperState | read-only | current | This object is used to display the current state of the DCBX state machine for the application priority feature on the given port. If state is Off '(1)', then … |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.4 | ColumnfsAppPriDcbxStateMachine | read-only | current | This object is used to display the DCBX state machine type that is used by the application priority feature on the given port. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.5 | ColumnfsAppPriClearTLVCounters | read-write | current | This object when set to TRUE, clears the following counters associated with this port and resets its value to FALSE: fsAppPriTxTLVCounter, fsAppPriRxTLVCounter… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.6 | ColumnfsAppPriTxTLVCounter | read-only | current | This object is used to keep track of the number of application priority TLVs that are transmitted from the port. This counter will be incremented every time an… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.7 | ColumnfsAppPriRxTLVCounter | read-only | current | This object indicates the number of application priority TLVs that are received in this port. This counter will be incremented every time when there is applica… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.8 | ColumnfsAppPriRxTLVErrors | read-only | current | This object indicates the number of malformed TLVs received by application priority module. This counter will be incremented every time an application priority… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.9 | ColumnfsAppPriAppProtocols | read-only | current | This object indicates the total number of application prioirty entries present in the last TLV received from its peer |
| 1.3.6.1.4.1.10876.101.2.22.3.4.2.1.10 | ColumnfsAppPriRowStatus | read-write | current | This object is used to create and delete a row in this table. Only 'createAndGo', and 'destroy' values are allowed for this object. 'createAndWait' and 'notInS… |
| 1.3.6.1.4.1.10876.101.2.22.3.4.3 | TablefsAppPriXAppTable | not-accessible | current | This table augments lldpXdot1dcbxAdminApplicationPriorityAppTable, describing parameters of an application priority table. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.3.1 | RowfsAppPriXAppEntry | not-accessible | current | This table contains management information applicable to an application entry. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.3.1.1 | ColumnfsAppPriXAppRowStatus | read-write | current | The row status of Application Priority Mapping Entry |
| 1.3.6.1.4.1.10876.101.2.22.3.4.4 | TablefslldpXdot1dcbxLocApplicationPriorityBasicTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP Application PrioriyTLV on the local system known to this agent |
| 1.3.6.1.4.1.10876.101.2.22.3.4.4.1 | RowfslldpXdot1dcbxLocApplicationPriorityBasicEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Application PriorityTLV LLDP extension. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.4.1.1 | ColumnfslldpXdot1dcbxLocApplicationPriorityWilling | read-only | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.5 | TablefslldpXdot1dcbxAdminApplicationPriorityBasicTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP Application PrioriyTLV on the local system known to this agent |
| 1.3.6.1.4.1.10876.101.2.22.3.4.5.1 | RowfslldpXdot1dcbxAdminApplicationPriorityBasicEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Application PriorityTLV LLDP extension. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.5.1.1 | ColumnfslldpXdot1dcbxAdminApplicationPriorityWilling | read-write | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.6 | TablefslldpXdot1dcbxRemApplicationPriorityBasicTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP Application Prioriy TLV on the local system known to this agent |
| 1.3.6.1.4.1.10876.101.2.22.3.4.6.1 | RowfslldpXdot1dcbxRemApplicationPriorityBasicEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Application Priority TLV LLDP extension. |
| 1.3.6.1.4.1.10876.101.2.22.3.4.6.1.1 | ColumnfslldpXdot1dcbxRemApplicationPriorityWilling | read-only | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.10876.101.2.22.3.5 | NodefsTCSupportedObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.3.5.1 | TablefslldpXdot1dcbxConfigTCSupportedTable | not-accessible | current | A table that controls selection of Traffic Classes Supported TLVs to be transmitted on individual ports. |
| 1.3.6.1.4.1.10876.101.2.22.3.5.1.1 | RowfslldpXdot1dcbxConfigTCSupportedEntry | not-accessible | current | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Traffic Classes Supported TLV on LLDP transmission capable… |
| 1.3.6.1.4.1.10876.101.2.22.3.5.1.1.1 | ColumnfslldpXdot1dcbxConfigTCSupportedTxEnable | read-write | current | The fslldpXdot1dcbxConfigTCSupportedTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 org… |
| 1.3.6.1.4.1.10876.101.2.22.3.5.2 | TablefslldpXdot1dcbxLocTCSupportedTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP TCSupported TLV on the local system known to this agent |
| 1.3.6.1.4.1.10876.101.2.22.3.5.2.1 | RowfslldpXdot1dcbxLocTCSupportedEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Traffic Classes Supported TLV LLDP extension. |
| 1.3.6.1.4.1.10876.101.2.22.3.5.2.1.1 | ColumnfslldpXdot1dcbxLocTCSupported | read-only | current | Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. |
| 1.3.6.1.4.1.10876.101.2.22.3.5.3 | TablefslldpXdot1dcbxRemTCSupportedTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP TCSupported TLV on the local system known to this agent |
| 1.3.6.1.4.1.10876.101.2.22.3.5.3.1 | RowfslldpXdot1dcbxRemTCSupportedEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Traffic Classes Supported TLV LLDP extension. |
| 1.3.6.1.4.1.10876.101.2.22.3.5.3.1.1 | ColumnfslldpXdot1dcbxRemTCSupported | read-only | current | Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. |
| 1.3.6.1.4.1.10876.101.2.22.3.5.4 | TablefslldpXdot1dcbxAdminTCSupportedTable | not-accessible | current | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP TCSupported TLV on the local system known to this agent |
| 1.3.6.1.4.1.10876.101.2.22.3.5.4.1 | RowfslldpXdot1dcbxAdminTCSupportedEntry | not-accessible | current | Information about the IEEE 802.1 organizational defined Traffic Classes Supported TLV LLDP extension. |
| 1.3.6.1.4.1.10876.101.2.22.3.5.4.1.1 | ColumnfslldpXdot1dcbxAdminTCSupported | read-only | current | Indicates the number of traffic classes supported on the local system. A value of 0 indicates that 8 traffic classes are supported. Note that generaly this rep… |
| 1.3.6.1.4.1.10876.101.2.22.4 | NodefsDcbNotificationObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.4.0 | NodefsDCBTraps | |||
| 1.3.6.1.4.1.10876.101.2.22.4.0.1 | NotificationfsETSModuleStatusTrap | current | This trap is generated when there is a change in the ETS Module status.. This trap is generated only if the corresponding bit (bit 1) in the fsETSGlobalEnableT… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.2 | NotificationfsETSPortAdminStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the ETS Admin status and the corresponding bit (bit 2) in the fsETSGlobalEnab… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.3 | NotificationfsETSPortPeerStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the DCBX Peer Status and the corresponding bit (bit 3) in the fsETSGlobalEnab… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.4 | NotificationfsETSPortDcbxOperStateTrap | current | This trap is generated in the following conditions. Whenever there is a change in the ETS Operational State and the corresponding bit (bit 4) in the fsETSGloba… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.5 | NotificationfsPFCModuleStatusTrap | current | This trap is generated when there is a change in the PFC Module status is enabled. This trap is generated only if the corresponding bit (bit 1) in the fsPFCGlo… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.6 | NotificationfsPFCPortAdminStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the PFC Admin Status and the corresponding bit (bit 2) in the fsPFCGlobalEnab… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.7 | NotificationfsPFCPortPeerStatusTrap | current | This trap is generated in the following conditions. Whenever there is a change in the DCBX Peer Status and the corresponding bit (bit 3) in the fsPFCGlobalEnab… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.8 | NotificationfsPFCPortDcbxOperStateTrap | current | This trap is generated in the following conditions. Whenever there is a change in the PFC Operational State and the corresponding bit (bit 4) in the fsPFCGloba… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.9 | NotificationfsAppPriModuleStatusTrap | current | This trap is generated whenever there is a change in the application priority Module status. This trap is generated only if the corresponding bit (bit 1) in th… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.10 | NotificationfsAppPriPortAdminStatusTrap | current | This trap is generated whenever there is a change in the application priority Admin Status and the corresponding bit (bit 2) in the fsAppPriGlobalEnableTrap is… | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.11 | NotificationfsAppPriPortPeerStatusTrap | current | This trap is generated whenever there is a change in the DCBX Peer Status and the corresponding bit (bit 3) in the fsAppPriGlobalEnableTrap is set to send the … | |
| 1.3.6.1.4.1.10876.101.2.22.4.0.12 | NotificationfsAppPriPortDcbxOperStateTrap | current | This trap is generated whenever there is a change in the application priority Operational State and the corresponding bit (bit 4) in the fsAppPriGlobalEnableTr… | |
| 1.3.6.1.4.1.10876.101.2.22.4.1 | NodefsDCBTrapObjects | |||
| 1.3.6.1.4.1.10876.101.2.22.4.1.1 | ScalarfsDcbTrapPortNumber | accessible-for-notify | current | This object refers to the Port number for which the DCBX feature is enabled. And will be used in sending the feature port specific Traps. |
| 1.3.6.1.4.1.10876.101.2.22.4.1.2 | ScalarfsDcbPeerUpStatus | accessible-for-notify | current | This object refers to the DCBX Peer Up or Peer down status on the port. If the value is 'true', then the DCBX Peer will be present and UP. If the value is 'fal… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DcbAdminMode | INTEGER { auto(0), on(1), off(2)} | current | 'auto(0)', In this mode, all the opertaional(local) parameters for the feature will be determined by the DCBX state machine. 'on(1)', In this mode, all the opertaional(local) parameters for the feature will not be deter… |
| DcbState | INTEGER { off(0), init(1), rxrecommended(2) } | current | The state of the DCBX state machine. off '(0)', In this state all Operational(local) parameters for the feature will be same as Admin Configuration parameters but will not be operational in the system(hardware). init '(… |
| DcbStateMachineType | INTEGER { asymmetric(1), symmetric(2) } | current | asymmetric'(1)',By using this state machine the operational parameters for the DCB feature can be same as peer or not. symmetric '(2)',By using this state machine the operational parameters for the DCB feature will be s… |
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| FsLldpXdot1dcbxTCSupportedCapacity | Integer32 (0|1..7) | current | Indicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight but may have fewer supported. A value of zero… |